Emerson Bms Battery Monitoring System Brochures And Data Sheets PDS1

: Emerson Emerson-Bms-Battery-Monitoring-System-Brochures-And-Data-Sheets-680016 emerson-bms-battery-monitoring-system-brochures-and-data-sheets-680016 emerson pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Chloride BMS

Industrial Power for
Business-Critical Continuity™

Battery Monitoring System

Chloride BMS is a battery monitoring
tool to effectively manage stand-by
battery banks, thereby ensuring the
reliability of back-up power systems. It
helps minimizing the risk of failure to
critical systems.
BMS enables maintenance teams to easily
monitor battery health status and resolve
potential issues before they become
costly problems.
Benefits
 Reduced maintenance costs through
preventive maintenance instead of emergency replacement
 Maximized battery life through smart
diagnostics, regular data analysis and ontime remedial action
 Increased safety on site as back-up power
remains available when most needed and
less human presence is required in battery
room

Key Features
 24/7 alarm notification
 Event Log of all activities affecting the
battery bank
 Remote access – via TCP/IP or Modbus
 Automatic capture of data and report
generation
 Individual battery impedance measure
 Individual and ambient battery temperature
measures
 Individual and battery string voltage and
current measures
 Compatible with Ni-Cd and Lead batteries,
open or gas-recombination types
 Optical isolation to increase safety
 Wide choice of configurations to meet the
most complex architectures

Applications
Chloride BMS suits all applications where safety
and reliance on a battery bank is highly critical:
 Oil and Gas, Petrochemical and Chemical
industries
 Power generation plants
 Power Transmission and Distribution
 Continuous process industries

The power to predict battery health
Chloride BMS battery monitoring system is the ultimate detection tool to
predict and detect stand-by battery bank issues.
Routine testing is essential to evaluate performance of any battery. The
Chloride BMS continuous monitoring tool allows preventive detection of any
potential anomaly: all the relevant parameters, such as voltages, current,
impedance and temperature are constantly measured to allow a secure
diagnostic of the battery health status.
A wide scope of communication features such as emailing, SMS and serial link
allows the maintenance manager to get the right information early enough
to prevent power failures.
By using the Link dedicated software, the user can access to real time battery
status and measurements, view alarm and battery history and check alarm
status of all connected cells. It is also possible to initiate and manage battery
dedicated reports.

Chloride BMS

Chloride BMS Box - technical data
Purpose
The Chloride BMS box is a wall-mounted box to interconnect the monitored battery with the monitoring software tool
and which allows remote indication via serial link and volt-free contacts.
General Data
Power supply voltage range
48VDC - 400VDC (from battery)
Dimensions
Height: 560mm
Width: 585mm
Depth: 400mm
Ingress protection
Frame colour
Cable entry
Operating temperature
Storage temperature
Communication
Relay outputs (volt-free contacts)

IP42 according to IEC60529
Grey RAL 7032
Bottom
0°C to 50°C
0°C to 70°C

Com port 1
Com port 2

Ethernet
RS 485 interface: Modbus ASCII or RTU protocol

-Voltage fault
-Temperature fault
-Impedance fault
-System fault

Sentinel data acquisition module - technical data
Purpose
The Sentinel module allows to measure string values and makes data acquisition from the connected m-Senzors.
Battery string measured values
String voltage range
2V - 600V
String current:
•Measurement Range
0A - 2000A
•Number of string current measures
up to 5 (scaleable to 16)
String ambient temperature:
•Measurement range
0°C to 50°C
•Number of measures
up to 5. Only 1 sensor per battery room if several strings in
the same battery room
Acquisition of battery monoblock measured values
(1)
Number of monoblocks
up to 160 (scaleable to 1280)
Voltage (depending on battery type and m-Senzor type)
from 1V to 12V
(2)
Impedance (depending on block voltage and m-Senzor)
from 0.15 to 40 mΩ - For Lead Acid batteries ONLY
Temperature(2)
from -10°C to +70°C
General Data
Power supply voltage range
48 VDC - 110 VDC
Dimensions
Height: 270mm (1U)
Width: 430mm
Depth: 45mm

Chloride BMS box

Sentinel module

Communication
LEDs
12 status LEDs on front of the module
Service port
RS232 for configuration / factory setting)
Digital inputs
4
(1)
A monoblock represents one or more battery cells in a container.
(2)
Available as option.
m-Senzor module technical data
Purpose
m-Senzor is the measurement module which can measure individual monoblock voltage, impedance and temperature.
Application
Lead Acid or Nickel-Cadmium
Vented or Recombination
Measurements
Input configuration
Single or Dual monoblocks sensors
Nominal voltage
1V
2V
4V
6V
8V
12 V
Voltage measure
0.8V - 1.9V
1.6V - 2.6V
3.2V - 5.2V
4.8V - 7.8V
6.4V - 10.4V
9.6V - 15.6V
Impedance measure
0.15 - 5 mΩ
0.15 - 5 mΩ
0.15 - 5 mΩ
0.5 - 20 mΩ
0.5 - 20 mΩ
1 - 40 mΩ
Temperature measure
-10°C to +70°C (measure taken on negative post of battery)
General Data
Power supply
powered by the monoblocks being monitored
Interface to Sentinel
BBUS (150m max cable length per BBUS port)

m-Senzor module

Link Battery Management Software
Purpose
Link is the battery management software which allows easy interfacing and understanding of battery status and alarms
Recommended PC system requirements (3)
Processor
Intel E5400 DUAL CORE or better
Operating system
Windows XP Professional or greater
RAM
2 GB
(3)
PC is not part of our scope of supply.

Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.

Link software screenshot

AC Power

Embedded Power

Power Switching & Controls

Connectivity

Industrial Power

Precision Cooling

DC Power

Infrastructure Management & Monitoring

Racks & Integrated Cabinets

Embedded Computing

Outside Plant

Services

Emerson Network Power IS S.A.S
30 avenue Montgolfier - BP90 - 69684 Chassieu Cedex - France
T: +33 (0)4 78 40 13 56 F: +33(0)4 78 90 58 90
Industrial.sales.Chloride@Emerson.com
EmersonNetworkPower.com

Emerson, Business-Critical Continuity and
Emerson Network Power are trademarks of
Emerson Electric Co. or one of its affiliated companies.
©2012 Emerson Electric Co.
BMS-DSUK-Rev0-12/2012

While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

Industrial Power for
Business-Critical Continuity™

Battery Monitoring System



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Page Layout                     : SinglePage
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:22a905a9-fdde-458b-8401-a4d8307b3235
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2013:01:11 11:06:03+01:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:01:11 11:07:25+01:00
Metadata Date                   : 2013:01:11 11:07:25+01:00
Document ID                     : uuid:68ef74a5-3f0b-4e77-80fb-cd73fec4fdac
Format                          : application/pdf
Creator                         : NLE
Title                           : BMS PDS1.indd
Author                          : NLE

EXIF Metadata provided by EXIF.tools