Emerson Bms Battery Monitoring System Brochures And Data Sheets PDS1

: Emerson Emerson-Bms-Battery-Monitoring-System-Brochures-And-Data-Sheets-680016 emerson-bms-battery-monitoring-system-brochures-and-data-sheets-680016 emerson pdf

Open the PDF directly: View PDF .
Page Count: 2

Industrial Power for

Business-Critical Continuity™

The power to predict battery health

Chloride BMS battery monitoring system is the ultimate detection tool to

predict and detect stand-by battery bank issues.

Routine testing is essential to evaluate performance of any battery. The

Chloride BMS continuous monitoring tool allows preventive detection of any

potential anomaly: all the relevant parameters, such as voltages, current,

impedance and temperature are constantly measured to allow a secure

diagnostic of the battery health status.

A wide scope of communication features such as emailing, SMS and serial link

allows the maintenance manager to get the right information early enough

to prevent power failures.

By using the Link dedicated software, the user can access to real time battery

status and measurements, view alarm and battery history and check alarm

status of all connected cells. It is also possible to initiate and manage battery

dedicated reports.

Chloride BMS is a battery monitoring

tool to effectively manage stand-by

battery banks, thereby ensuring the

reliability of back-up power systems. It

helps minimizing the risk of failure to

critical systems.

BMS enables maintenance teams to easily

monitor battery health status and resolve

potential issues before they become

costly problems.

Benefi ts

Reduced maintenance costs through

preventive maintenance instead of emer-

gency replacement

Maximized battery life through smart

diagnostics, regular data analysis and on-

time remedial action

Increased safety on site as back-up power

remains available when most needed and

less human presence is required in battery

room

Key Features

24/7 alarm notifi cation

Event Log of all activities affecting the

battery bank

Remote access – via TCP/IP or Modbus

Automatic capture of data and report

generation

Individual battery impedance measure

Individual and ambient battery temperature

measures

Individual and battery string voltage and

current measures

Compatible with Ni-Cd and Lead batteries,

open or gas-recombination types

Optical isolation to increase safety

Wide choice of confi gurations to meet the

most complex architectures

Applications

Chloride BMS suits all applications where safety

and reliance on a battery bank is highly critical:

Oil and Gas, Petrochemical and Chemical

industries

Power generation plants

Power Transmission and Distribution

Continuous process industries

Chloride BMS

Battery Monitoring System

Industrial Power for

Business-Critical Continuity™

Chloride BMS

Battery Monitoring System

Sentinel data acquisition module - technical data

Purpose

The Sentinel module allows to measure string values and makes data acquisition from the connected m-Senzors.

Battery string measured values

String voltage range 2V - 600V

String current:

•Measurement Range 0A - 2000A

•Number of string current measures up to 5 (scaleable to 16)

String ambient temperature:

•Measurement range 0°C to 50°C

•Number of measures up to 5. Only 1 sensor per battery room if several strings in

the same battery room

Acquisition of battery monoblock measured values

Number of monoblocks(1) up to 160 (scaleable to 1280)

Voltage (depending on battery type and m-Senzor type) from 1V to 12V

Impedance(2) (depending on block voltage and m-Senzor) from 0.15 to 40 mΩ - For Lead Acid batteries ONLY

Temperature(2) from -10°C to +70°C

General Data

Power supply voltage range 48 VDC - 110 VDC

Dimensions Height: 270mm (1U)

Width: 430mm

Depth: 45mm

Communication

LEDs 12 status LEDs on front of the module

Service port RS232 for confi guration / factory setting)

Digital inputs 4

(1)A monoblock represents one or more battery cells in a container.

(2)Available as option.

m-Senzor module technical data

Purpose

m-Senzor is the measurement module which can measure individual monoblock voltage, impedance and temperature.

Application Lead Acid or Nickel-Cadmium

Vented or Recombination

Measurements

Input confi guration Single or Dual monoblocks sensors

Nominal voltage 1 V 2 V 4 V 6 V 8V 12 V

Voltage measure 0.8V - 1.9V 1.6V - 2.6V 3.2V - 5.2V 4.8V - 7.8V 6.4V - 10.4V 9.6V - 15.6V

Impedance measure 0.15 - 5 mΩ0.15 - 5 mΩ0.15 - 5 mΩ0.5 - 20 mΩ0.5 - 20 mΩ1 - 40 mΩ

Temperature measure -10°C to +70°C (measure taken on negative post of battery)

General Data

Power supply powered by the monoblocks being monitored

Interface to Sentinel BBUS (150m max cable length per BBUS port)

Link Battery Management Software

Purpose

Link is the battery management software which allows easy interfacing and understanding of battery status and alarms

Recommended PC system requirements (3)

Processor Intel E5400 DUAL CORE or better

Operating system Windows XP Professional or greater

RAM 2 GB

(3)PC is not part of our scope of supply.

Sentinel module

m-Senzor module

Chloride BMS Box - technical data

Purpose

The Chloride BMS box is a wall-mounted box to interconnect the monitored battery with the monitoring software tool

and which allows remote indication via serial link and volt-free contacts.

General Data

Power supply voltage range 48VDC - 400VDC (from battery)

Dimensions Height: 560mm

Width: 585mm

Depth: 400mm

Ingress protection IP42 according to IEC60529

Frame colour Grey RAL 7032

Cable entry Bottom

Operating temperature 0°C to 50°C

Storage temperature 0°C to 70°C

Communication

Relay outputs (volt-free contacts) -Voltage fault

-Temperature fault

-Impedance fault

-System fault

Com port 1 Ethernet

Com port 2 RS 485 interface: Modbus ASCII or RTU protocol

Chloride BMS box

Link software screenshot

Emerson Network Power.

The global leader in enabling

Business-Critical Continuity™.

Emerson, Business-Critical Continuity and

Emerson Network Power are trademarks of

Emerson Electric Co. or one of its affi liated companies.

©2012 Emerson Electric Co.

BMS-DSUK-Rev0-12/2012

AC Power

Connectivity

DC Power Infrastructure Management & Monitoring

Outside Plant

Power Switching & Controls

Embedded Computing

Embedded Power

Industrial Power Precision Cooling

Racks & Integrated Cabinets

Services

While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

Emerson Network Power IS S.A.S

30 avenue Montgolfi er - BP90 - 69684 Chassieu Cedex - France

T: +33 (0)4 78 40 13 56 F: +33(0)4 78 90 58 90

Industrial.sales.Chloride@Emerson.com

EmersonNetworkPower.com