Emerson Chloride Cp 60Z 5 To 60 Kva Brochures And Data Sheets
2015-03-30
: Emerson Emerson-Chloride-Cp-60Z-5-To-60-Kva-Brochures-And-Data-Sheets-680012 emerson-chloride-cp-60z-5-to-60-kva-brochures-and-data-sheets-680012 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Chloride CP-60Z AC UPS System Industrial Power for Business-Critical Continuity™ 5 to 60kVA - 1ph and 3ph output The Chloride CP-60Z industrial Uninterruptible Power Supply (UPS) system is the result of latest industrial requirements combined with R&D innovations to offer an improved efficiency and reduced operating costs industrial UPS. The Chloride CP range is designed to meet the stringent electrical and mechanical requirements in industrial environments. Each Chloride CP product is based on interchangeable sub-assemblies to allow full customization, in compliance with client’s technical specification and with project documentation requirements. Benefits Energy savings - Improved efficiency means reduced power consumption and smaller air conditioning system Project savings - Higher input power factor and lower inrush current allow smaller upstream transformer, switchgear and cables and reduce line current and losses in the cables. Safe and easy maintenance - Segregated manual bypass and front access to major components improve safety and reduce MTTR Asset Management System - The UPS is compatible with the Emerson AMS Suite Intelligent Device Manager which helps to ensure an efficient preventive maintenance Key Features Low Ripple Voltage to reduce battery stress and optimize its lifetime Low inrush current < 4In (12-pulse) not to oversize mains power supply SCR-based rectifier, 6 or 12 pulses, with improved operation to significantly reduce the mains’ pollution (THDi) and the input RMS current Proven reliability: The unique design allows the UPS to continuously operate at full load at a permanent 40°C ambient temperature Galvanic isolation: input and output transformers are standard on the complete range. Ingress protection IP42 is provided as standard to operate in the most demanding environments Compatibility with Nickel-Cadmium and LeadAcid batteries, open or gas-recombination types Multilingual digital graphic display with embedded event log Wide choice of configurations, options, and remote monitoring solutions Applications The Chloride CP-60Z is the best solution, both cost effective and environmental friendly, to meet industrial requirements of a wide range of sectors, such as: Oil & Gas, offshore and onshore Refining and Petrochemical industries Water infrastructures Mining Transportation (rail, metro, tramway) Custom-designed AC UPS systems to secure industrial processes The Chloride CP-60Z is available from 5 to 60kVA in single-phase or three-phase output configuration. It offers a wide choice of DC battery voltages (110V, 220V or 400V) and of output voltages (from 1x110 V to 3x415V) to best fit the application. The UPS uses patented digital Vector Control technology which increases the UPS performances, enables active conditioning of the load and allows personalised system settings. The Chloride CP-60Z can be adapted for project-specific requirements. A wide choice of industrialized extras allow system customization according to the most demanding technical specifications. To further improve load availability and process reliability, the system is able to operate in dual parallel configuration, centralized or distributed, with single or dual batteries, and can include AC bus-tie. Chloride CP-60Z AC UPS System Ratings - Output Power at cos phi 0.8 (kVA) vs battery voltage (Vdc) 110-120 Vdc 5 10 20 30 - 220-240 Vdc 5 10 20 30 40 50 60 Standards 400 Vdc 40 50 60 Technical Data Input Input voltage (other voltage on request) Inrush current Power factor Frequency range Intermediate DC circuit Nominal DC voltage Voltage stability Voltage ripple (battery connected) Current limitation Charging characteristic Output Available ratings (see table above) AC voltage: • Single phase • Three phase Frequency Frequency stability: • with internal oscillator • with reserve synchronism Voltage stability (0-100% load variation): • static • dynamic Overload inverter (in % of nominal power) Short-circuit clearance: • 1-ph output (in % of nominal current) • 3-ph output (in % of nominal current) Voltage distorsion: with 100% linear load with 100% non linear load Allowable power factor Allowable crest factor Battery Type Autonomy Battery current limitation General Data Rectifier efficiency Operating temperature Storage temperature Relative humidity Operating altitude Cooling External ingress protection Noise Input / output isolation Frame colour Dimensions Emerson Network Power. The global leader in enabling Business-Critical Continuity™. Compliance IEC 62040 (-1, -2, -3) / 60146 (-1-1, -1-3, -2) / IEC 60950 IEC 61000-6-2 - IEC 61000-6-4 IEC 60529 / IEC 60439 / IEC 60076 Conformity EMC Directive 2004/108/CE Low Voltage Directive (LVD) 2006/95/CE CE Mark Options Rectifier 400 VAC (380; 415) ±10% < 8 x In (6-pulse version) < 4 x In (12-pulse version) up to 0.94 50 Hz (60 Hz factory setting) ±5% 110 / 120 / 220 / 240 / 400 VDC ±1% in float mode, input within tolerance ±1.5% for parallel chargers 0.25% RMS, in float mode I nominal IU according to DIN 41773 Battery Output Reserve from 5 to 60 kVA (at PF 0.8 lagging) 230 VAC (220, 240) ; 110 VAC (115, 120) 400 VAC (380, 415) ; 220 VAC (190, 208) System 50 Hz (60 Hz factory setting) ±0.05% ±3% (from 0.2 to 6% factory setting) ±1% (±2% for parallel systems) VFI SS 111 - complies to IEC62040-3, class 1 Mechanical 150%/1 min - 125%/10 min 250%/100 ms - 175%/5 s 315%/100 ms - 220%/5 s (Ph-N) <3 % ≤5 % (complies with IEC 62040-1-2) Communication 0.5 lagging to 0.5 leading 3/1 Lead Acid or Nickel Cadmium, vented or recombination From few minutes to several hours, as required and specified 0.1C (lead acid) / 0.2C (Nickel Cadmium) up to 90 % (according to rating and config.) From 0 to 40 °C From -20 °C to +70 °C (battery excluded) <90 % non condensing at 20 °C 1000 m (without system derating) Fan-assisted with redundant monitored fans IP 42 less than 66 dB (according to rating) 2500 VAC / 1 minute RAL 7032 Varying according to ratings and options 12-pulse SCR rectifier Special 3-ph input voltage (up to 3x690Vac) Surge and/or lighning protections Input circuit breaker Battery circuit protection box (Fuse or circuit breaker) Battery reversed polarity detection Battery Low Voltage Disconnection (LVD) Battery black start Battery room temperature sensor for battery charge compensation DC earth fault detection AC earth fault detection Output fuse switch or circuit breaker Reserve input circuit breaker Reserve transformer (H class) Reserve stabilizer (servo-controlled) Stabilizer output isolator Dual configurations AC distribution (circuit breakers) Backfeed protection Internal cabinet lighting Auxiliary power socket Anti-condensation heater UPS cabinet temperature monitor Special cabinet identification (Tag, nameplate) Top cable entry Special frame color Special feet height Special keylock Special gland plate Lifting eyes 2mm panels thickness Front panel analogue meters (72x72, class 1 or class 1.5) Transducers 4-20mA Additional volt-free contacts Modbus RTU (RS232 or RS485) Modbus / TCP Profibus IEC61850 protocol PPVis monitoring software AMS compatibility kit Passive mimic panel Active mimic panel with integrated LEDs Special lamp indicator on front panel (22mm diameter) AC Power Embedded Power Power Switching & Controls Connectivity Industrial Power Precision Cooling DC Power Infrastructure Management & Monitoring Racks & Integrated Cabinets Embedded Computing Outside Plant Services Emerson Network Power IS S.A.S 30 avenue Montgolfier - BP90 - 69684 Chassieu Cedex - France T: +33 (0)4 78 40 13 56 F: +33(0)4 78 90 58 90 Industrial.sales.Chloride@Emerson.com EmersonNetworkPower.com Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. ©2013 Emerson Electric Co. CP60Z-DSUK-Rev0-01/2013 While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network Power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Industrial Power for Business-Critical Continuity™ 5 to 60 kVA - 1 ph and 3ph output
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Create Date : 2013:03:14 11:13:35+01:00 Metadata Date : 2013:03:14 11:13:41+01:00 Modify Date : 2013:03:14 11:13:41+01:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 10593 bytes, use -b option to extract), (Binary data 11980 bytes, use -b option to extract) Instance ID : uuid:1788ee0a-2f1b-4b8c-8752-dd4797840831 Original Document ID : xmp.did:77357CAC7A35E211922EFD14297DBD11 Document ID : xmp.did:26118FB0828CE2118380A5E9DA124AA7 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:77357CAC7A35E211922EFD14297DBD11, xmp.iid:7B357CAC7A35E211922EFD14297DBD11, xmp.iid:7FA291288235E211922EFD14297DBD11, xmp.iid:83A291288235E211922EFD14297DBD11, xmp.iid:E9E8E05A3D3AE211800BF1E10407055C, xmp.iid:D9366C692445E2118E74CCC162592B5F, xmp.iid:DF366C692445E2118E74CCC162592B5F, xmp.iid:E5ED054BBA49E211ABA7CFFFC62A6B3F, xmp.iid:229E164BBA49E211ABA7CFFFC62A6B3F, xmp.iid:F7C0F717F849E211ABA7CFFFC62A6B3F, xmp.iid:1BC58A722D50E211B5318735FBA2E623, xmp.iid:6E49D2722D50E211B5318735FBA2E623, xmp.iid:461DBC14E460E211B524B94489D39B44, xmp.iid:C6B02B523965E211B900C3774EDF04FE, xmp.iid:CEB02B523965E211B900C3774EDF04FE, xmp.iid:CA845304B16BE211AE60CC53E77A4E6E, xmp.iid:B75179CAB16BE211AE60CC53E77A4E6E, xmp.iid:C3F53B9FD26EE211862AE25754577976, xmp.iid:2D118FB0828CE2118380A5E9DA124AA7, xmp.iid:2E118FB0828CE2118380A5E9DA124AA7 History When : 2012:11:23 15:51:42+01:00, 2012:11:23 16:26:31+01:00, 2012:11:23 16:26:31+01:00, 2012:11:23 16:36:08+01:00, 2012:11:29 16:56:36+01:00, 2012:12:13 13:55:46+01:00, 2012:12:13 13:55:46+01:00, 2012:12:19 09:58:44+01:00, 2012:12:19 09:58:44+01:00, 2012:12:19 17:21:07+01:00, 2012:12:27 14:58:09+01:00, 2012:12:27 14:58:10+01:00, 2013:01:17 21:25:49+01:00, 2013:01:23 09:46:04+01:00, 2013:01:23 09:46:04+01:00, 2013:01:31 15:23:32+01:00, 2013:01:31 15:23:32+01:00, 2013:02:04 14:56:06+01:00, 2013:03:14 09:46:28+01:00, 2013:03:14 09:46:28+01:00 History Software Agent : Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign CS6 (Windows), Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /, /metadata, /, /, /metadata, /, /metadata, /, /, /metadata, /, /, /metadata, /, /metadata, /, /, /;/metadata, /metadata Derived From Instance ID : xmp.iid:CA845304B16BE211AE60CC53E77A4E6E Derived From Document ID : xmp.did:CEB02B523965E211B900C3774EDF04FE Derived From Original Document ID: xmp.did:77357CAC7A35E211922EFD14297DBD11 Derived From Rendition Class : default Doc Change Count : 3 Key Stamp Mp : AAAAAA== Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 2 Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools