Emerson Fisher 657 And 667 Data Sheet
2015-03-30
: Emerson Emerson-Fisher-657-And-667-Data-Sheet-681928 emerson-fisher-657-and-667-data-sheet-681928 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Fisherr 657 and 667 Diaphragm Actuators Fisher 657 and 667 spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner pneumatic output signals applied to the actuator diaphragm. Zero setting of the actuator is determined by the compression of the actuator spring. Span is set by both the actuator spring rate and the number of springs available. The 657 actuator is direct-acting; the 667 is reverse-acting. These actuators are designed to provide dependable on-off or throttling operation of automatic control valves. Features Application Versatility–Five actuator types in eleven sizes are available for an extensive variety of applications. Spring rates, travel stops, and manual operators are available for nearly any control valve application. Excellent Linearity Between Loading Pressure and Travel–A molded diaphragm travels in a deep diaphragm casing, minimizing area change throughout the travel. High Degree of Dynamic Stability and Frequency Response–A shallow casing on the pressure side means reduced volume on that side, thereby minimizing response time. High Thrust Capability–The molded diaphragm allows maximum thrust for given diaphragm size. Long Service Life–Rugged thick-walled cast iron and steel construction provides increased stability, corrosion protection, and protection from deformation should over-pressurization occur. www.Fisher.com W2174-2 W1916-3 657 ACTUATOR 667 ACTUATOR Fisher 657 and 667 Actuators Mounted on easy-et Valves Cold Service Applications–Enhanced product specifications for all sizes of 657 and 667 diaphragm actuators allow performance to -50_C (-58_F). Use of a positioner is recommended to ensure responsiveness in applications operating below -40_C (-40_F). Positive Connections–A split block stem connection provides a solid transfer of motion while allowing easy mounting. The absence of linkages helps to avoid lost motion and inaccurate valve positioning. Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Specifications Standard Operating Pressure Range(1) 657 and 667: J 0.2 to 1.0 bar (3 to 15 psig) or J 0.4 to 2.0 bar (6 to 30 psig) 657-4 and 667-4: 0.2 to 1.9 bar (3 to 27 psig) 667 Size 76: J 0.4 to 2.0 bar (6 to 30 psig) or J 0 to 3.1 bar (0 to 45 psig) Maximum Travel See table 1 Output Indication Stainless steel disk or pointer and graduated scale Stroking Speed Dependent on actuator size, travel, spring rate, initial spring compression, and supply pressure. If stroking speed is critical, consult your Emerson Process Management sales office Maximum Allowable Thrust(2) See table 1 Operating Temperature Range(1) Standard Construction (Nitrile Elastomers): -40 to 82_C (-40 to 180_F) Optional Construction (Silicone Diaphragm): -40 to 149C (-40 to 300F) Maximum Valve Packing Box Temperature: 427_C (800_F) with cast iron yoke Volumetric Displacement See table 2 Signal Connections Sizes 30 - 60 and 667 Size 76: 1/4 NPT internal Sizes 70 and 87: 1/2 NPT internal Size 80 657: 3/4 NPT internal with 1/4 NPT internal bushing 667: 1/2 NPT internal with 1/4 NPT internal bushing Size 100: 1 NPT internal with 1/4 NPT internal bushing Effective Diaphragm Area See table 1 Construction Materials (refer to figure 1) Diaphragm Casing Sizes 30 - 87: Steel Size 80: J Cast iron or J steel Size 100: J Cast aluminum Diaphragm Sizes 30 - 87: J Nitrile on nylon, J Silicone on polyester Size 100: Nitrile on polyester Diaphragm Plate 657 Sizes 30- 60, 100: J Cast aluminum 657 Sizes 70 - 87: J Cast iron or J steel 667 Sizes 30 - 60, 100: J Cast aluminum or J steel 667 Sizes 70 - 87: J Cast iron or J steel Actuator Spring: Steel Spring Adjustor: Steel Spring Seat: J Steel or J cast iron Actuator Stem: Steel Travel Indicator: Stainless steel O-Rings: Nitrile Seal Bushing: Brass Stem Connector: Zinc-plated steel Yoke Sizes 30 - 80: J Cast iron or J steel Size 100: Steel Construction Materials for Cold Service [to -50_C (-58_F)] 657 and 667--all sizes Yoke: Steel (Grade LCC) Diaphragm: Silicone O-Rings:(3) Ethylene Propylene Bolting: Stainless Steel B8M Cl 2 Stem Connector: Stainless Steel Lubricant: Silicone Stem and Yoke Boss Diameters See table 1 Approximate Weight See table 3 Options J Oversize signal connections, J Plastic yoke covers, J Watertight yoke (sealed construction for certain applications where valve stem and packing must be protected) 1. The pressure and temperature limits in this bulletin and in any applicable standard or code limitation should not be exceeded. 2. Do not exceed the thrust limits in this bulletin. 3. Includes diaphragm casing seals, casing-mounted handwheel on 657, seal bushing on 667. 2 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Available Configurations Direct Action All 657 actuators are direct acting. Applying air pressure to the upper diaphragm casing forces the actuator stem downward. When this pressure is reduced, the opposing spring force moves the actuator stem upward. Should the loading pressure fail, the spring forces the stem to the extreme upward position. This provides fail-open action for push-down-to-close valves and fail-closed action for push-down-to-open valves. 657–A direct-acting actuator used on sliding-stem valves. Available in sizes 30 through 100. See figures 1, 2, 5, and 6. 657-4–A 657 actuator in sizes 70 and 87, designed with 102 mm (4-inch) travel. Reverse Action All 667 actuators are reverse acting. Applying air pressure to the lower diaphragm casing forces the actuator stem upward against the opposing spring force. When this loading pressure is reduced, the spring moves the actuator stem downward. Should the loading pressure fail, the spring forces the stem to the extreme downward position. These actuators provide fail-closed action for push-down-to-close valves and fail-open action for push-down-to-open valves. 667–A reverse-acting actuator used on sliding-stem valves. Available in sizes 30 through 100 and 76. See figures 1, 2, and 7. 667-4–A 667 actuator in sizes 70 and 87, designed with 102 mm (4-inch) travel. Accessories Handwheels Handwheels for diaphragm actuators are often used as adjustable travel stops. They also provide a ready means of positioning the control valve in an emergency. The specifications in tables 5 and 6 apply to handwheels on both 657 and 667 Series actuators. For repeated or daily manual operation, the unit should be equipped with a side-mounted handwheel actuator. Top-Mounted Handwheels–Typical 657 and 667 actuators with handwheels mounted on the diaphragm case are shown in figure 2 (not available on a 667 actuator, size 80). On the 657 actuator, the handwheel can be set to limit the travel in the upward direction; on the 667 actuator, travel in the downward direction can be restricted. A P-2 travel stop (figure 4) is available for a 667 actuator, sizes 45-60 to limit travel in either the upward or downward directions. An actuator with a P-2 travel stop is limited to a maximum travel of 19 mm (0.75 inch). The handwheel on the size 100 is similar in function to those on the smaller sizes, but it uses a gear drive similar to the drive employed on the integral side-mounted handwheels (see figure 2). Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Available Configurations . . . . . . . . . . . . . . . . . . . . . . . 3 Direct Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Reverse Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handwheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Adjustable Travel Stops . . . . . . . . . . . . . . . . . . . . . . . . 7 Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . 14 Tables Additional Specifications . . . . . . . . . . . . . . . . . . . . . . . 5 Volumetric Casing Displacement . . . . . . . . . . . . . . . . 6 Approximate Actuator Weights (without handwheel) . . . . . . . . . . . . . . . . . . . . . . . . 6 Thrust Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Handwheel Specifications . . . . . . . . . . . . . . . . . . . . . 10 Adjustable Travel Stop Styles . . . . . . . . . . . . . . . . . . 11 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Figure 1. Typical Actuators DIAPHRAGM CASINGS DIAPHRAGM DIAPHRAGM PLATE ACTUATOR SPRING ACTUATOR STEM SPRING SEAT SPRING ADJUSTOR STEM CONNECTOR YOKE TRAVEL INDICATOR DISK INDICATOR SCALE W0364-2 667 SIZES 30-87 657 SIZES 30-87 W0366-1 657 SIZE 100 4 W0363-2 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Table 1. Additional Specifications for Fisher 657 and 667 Series Actuators ACTUATOR SIZE EFFECTIVE DIAPHRAGM AREA cm2 YOKE BOSS DIAMETER 30 297 54 9.5 19 10,231 34 445 54 9.5 29 10,231 40 445 71 12.7 38 12,010 45 677 71 12.7 51 25,132 46 1006 71 12.7 51 33,584 50 677 90 19.1 51 25,131 60 1006 90 19.1 51 30,246 STEM DIA mm 70(2) 1419 90 19.1 76(667) 1006 90 19.1 25.4 80 1761 127 87(2) 1419 127 25.4 127H(5) 31.8 178 50.8 100 2902 Inch2 30 46 34 40 MAXIMUM TRAVEL 31.8 76 102(3) 51 76 76 102(3) MAXIMUM ALLOWABLE THRUST(1) N 39,142 30,246 63,392 88,075(4) 39,142 102 200,160 Inch Lb 2-1/8 3/8 0.75 2300 69 2-1/8 3/8 1.125 2300 69 2-13/16 1/2 1.5 2700 45 105 2-13/16 1/2 2 5650 46 156 2-13/16 1/2 2 7550 50 105 3-9/16 3/4 2 5650 60 156 3-9/16 3/4 2 6800 70(2) 220 3-9/16 3/4 76(667) 156 3-9/16 3/4 1 80 273 5 87(2) 220 5 1 100 450 5H(5) 1-1/4 7 2 1-1/4 3 4(3) 2 3 3 4(3) 4 8800 6800 14,150 19,800(4) 8800 45,000 1. These values are based on material limitations such as yoke, stem connection, diaphragm plate, and travel stop strengths. 2. Values also apply to 657-4 and 667-4 actuators. 3. For 657-4 and 667-4 actuator constructions. 4. Steel construction. 5. H=Heavy actuator-to-valve bolting. 5 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Table 2. Volumetric Casing Displacement for Fisher 657 and 667 Series Actuators ACTUATOR SIZE CLEARANCE VOLUME(1) TRAVEL, mm 11 16 19 cm3 29 38 51 76 102 Casing Volume(2), cm3 30 540 918 1080 1180 --- --- --- --- --- 34 and 40 934 1470 1700 1850 2330 2790 --- --- --- 45 and 50 1560 --- 2790 3000 3720 4420 5410 --- --- 46, 60, and 76 2180 --- 3880 4210 5280 6340 7740 --- --- 70 and 87 3490 5240 5950 6420 7830 9240 11,110 14,880 18,570 80 100 4820 --- --- --- 10,490 12,450 14,860 19,340 --- 657 10,880 --- --- 16,400 19,170 21,940 25,630 33,000 40,380 667 12,780 --- --- 18,320 21,070 23,840 27,530 34,900 42,280 2 3 4 TRAVEL, INCH Inch3 0.4375 0.625 0.75 1.125 1.5 Casing Volume(2), Inch3 30 34 and 40 45 and 50 33 57 95 56 90 --- 66 104 170 72 113 183 --142 227 --170 270 ----330 ------- ------- 46, 60, and 76 70 and 87 80 133 213 294 --320 --- 237 363 --- 257 392 --- 322 478 640 387 564 760 472 678 907 --980 1180 --1133 --- 657 664 --- --- 1002 1170 1339 1564 2014 2464 667 780 --- --- 1118 1286 1455 1680 2130 2580 100 1. Clearance volume indicates casing volume at zero travel. 2. Includes clearance volume. Table 3. Approximate Actuator Weights (without handwheel) 6 ACTUATOR ACTUATOR SIZE 657 30 16 15 36 34 34 22 22 48 48 40 23 23 51 50 45 37 41 82 90 46 49 55 107 121 50 42 43 92 94 60 53 55 116 122 70 107 115 235 254 76 --- 86 --- 190 80 234 284 515 626 87 116 118 255 260 100 346 544 762 1200 667 657 Kg 667 Lb Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Table 4. Thrust Capabilities(1) by Input Signal Range TRAVEL ACTUATOR SIZE mm 19 34 40 45 46 50 38 60 70 51 80 87 76 100 102 Inch 0.75 34 40 45 46 50 1.5 60 70 2 80 87 3 100 4 N 0.2-1 2250 1840 0.4-2 3890 3270 0.2-1 3380 3380 0.4-2 5830 5530 0.2-1 3380 2760 0.4-2 5530 3680 0.2-1 4670 4670 0.4-2 8410 8870 0.2-1 6940 6250 0.4-2 13,190 11,800 0.2-1 5140 3740 0.4-2 8410 7010 0.2-1 6940 4860 0.4-2 13,190 8330 0.2-1 7830 7830 0.4-2 18,590 13,700 0.2-1 10,110 11,250 0.4-2 18,950 19,680 0.2-1 6850 7830 0.4-2 18,590 13,700 0.2-1 16,010 8010 0.4-2 32,030 36,030 0.2-1 12,010 --- 0.4-2 22,019 28,024 Psig 30 1.125 THRUST CAPABILITIES 657 667 Bar 30 29 PRESSURE RANGE TO ACTUATOR DIAPHRAGM(2) Clockwise rotation of the handwheel on the 657 actuator moves the actuator stem downward, compressing the spring. Spring action returns the stem as the handwheel is turned counterclockwise. With the 667 actuator, counterclockwise rotation moves the stem upward, and spring action returns the stem on clockwise rotation. Side-Mounted Handwheels–Figure 3 shows the side-mounted handwheels (designated by the letters MO) applicable to sizes 34 through 87, 657 and 667 actuators. Size 30 actuators do not have a side-mounted handwheel available. All side-mounted handwheels can be used to stroke the valve in either direction at any point in the actuator stem travel. Unlike the top-mounted handwheel, the side-mounted handwheel can be positioned to limit travel in either direction, but not both at the same time. With the handwheel in the neutral position, automatic operation is possible throughout full valve travel. In any other position, valve travel will be restricted. The handwheel is furnished with a spring-loaded ball detent which prevents vibration from changing the setting. Lb 3-15 506 414 6-30 874 736 3-15 759 759 6-30 1311 1242 3-15 759 621 6-30 1242 828 3-15 1050 1050 6-30 1890 1995 3-15 1560 1404 6-30 2964 2652 3-15 1155 840 6-30 1890 1575 3-15 1560 1092 6-30 2964 1872 3-15 1760 1760 6-30 4180 3080 3-15 2272 2528 6-30 4260 4424 3-15 1540 1760 6-30 4180 3080 3-15 3600 1800 6-30 7200 8100 3-15 2700 --- 6-30 4950 6300 1. For Size 76 667 actuators, contact your Emerson Process Management sales office. 2. Consult Fisher 657 and 667 instruction manuals (D100306X012, D100307X012, D100310X012, and D100311X012) for additional information on maximum pressure limitations. Adjustable Travel Stops Top-mounted adjustable travel stops are available for 657 and 667 Series actuators. They are used to limit travel in the up, down, or up and down directions. Figure 4 illustrates the different constructions. Table 7 locates the different style constructions with actuator type and use. Other Accessories such as transducers, positioners, position transmitters, air relays, volume boosters, switching valves, lockup valves, limit switches, and solenoid valves are also available for actuator mounting. They are described in separate publications. Contact your Emerson Process Management sales office for details. 7 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Figure 2. Typical Top-Mounted Handwheels W0368-2 W0369-2 657 ACTUATOR (EXCEPT SIZE 100) 667 ACTUATOR (EXCEPT SIZES 80 AND 100) W0370-1 TOP VIEW W0370-1 657 ACTUATOR SIZE 100 (GEAR DRIVEN) 8 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Figure 3. Typical Side-Mounted Handwheels for Fisher 657 and 667 Series Actuators SECTION A-A W0371-1 W0372-1 SIZES 70, 76, 80, AND 87 SIZES 34 THROUGH 60 Figure 4. Adjustable Travel Stops STYLE 1 657 AND 657-4 UP STOP STYLE 2 657 AND 657-4 DOWN STOP STYLE 10 667 DOWN STOP STYLE 11 667 UP AND DOWN STOP 40A38A1211-E 40A8764-E STYLE 12 667 UP STOP STYLE 13 667 UP STOP STYLE 14 667 UP STOP STYLE P2 667 UP AND DOWN STOP 9 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Table 5. Fisher 657 Handwheel Specifications TOP-MOUNTED HANDWHEEL 657 ACTUATOR SIZE Handwheel Diameter Turns Per mm Travel Rim Force(1) mm SIDE-MOUNTED HANDWHEEL Maximum Handwheel Output Force(3) Handwheel Diameter Turns Per mm Travel Rim Force(1) Maximum Handwheel Output Force(3) N N mm N N 30 171 0.3 190 6670 --- --- --- --- 34 and 40 222 0.3 210 10,010 304 0.2 230 10,010 45 and 50 222 0.3 420 15,080 355 0.3 360 15,080 46 and 60 222 0.3 490 22,690 355 0.3 540 22,690 70 and 87 355 0.3 590 29,360 432 0.8 160 29,360 80 355 0.3 770 37,770 432 0.4 240 37,770 100(2) 406 6 270 160,000 --- --- --- --- Inch Turns Per Inch Travel Lb Lb Inch Turns Per Inch Travel Lb Lb 30 6.75 8 42 1500 --- --- --- --- 34 and 40 8.75 8 48 2250 12 5.14 52 2250 45 and 50 8.75 8 95 3390 14 6.65 81 3390 46 and 60 8.75 8 110 5100 14 6.65 122 5100 70 and 87 14 8 132 6600 17 20 36 6600 80 14 8 173 8490 17 10 53 8490 100(2) 16 144 60 36,000 --- --- --- --- 1. Tangential handwheel force required to produce the handwheel output force shown. (Proportional to handwheel output force). 2. Top-mounted with gear drive. 3. Maximum force available to compress the actuator spring and close the valve. 10 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Table 6. Fisher 667 Handwheel Specifications TOP-MOUNTED HANDWHEEL 667 ACTUATOR SIZE Handwheel Diameter mm Turns Per mm Travel Rim Force(1) SIDE-MOUNTED HANDWHEEL Maximum Handwheel Output Force(3) Handwheel Diameter 667 ACTUATOR SIZE Turns Per mm Travel Rim Force(1) N N N N 30 171 0.3 200 6670 30 --- --- --- --- 34 and 40 222 0.3 230 10,010 34 and 40 304 0.2 230 10,010 222 0.2 460 17,790 355 0.2 430 26,690 45 and 50 355 0.3 360 15,080 222 0.2 460 17,790 355 0.2 430 26,690 46 and 60 355 0.3 540 22,690 355 0.2 520 26,690 762 mm Bar 0.2 410 44,480 70, 76, and 87 432 0.8 160 29,360 406 6 270 160,000 80 432 0.4 240 37,770 667 ACTUATOR SIZE Inch Turns Per Inch Travel Lb Lb 667 ACTUATOR SIZE Inch Turns Per Inch Travel Lb Lb 30 6.75 8 45 1500 30 --- --- --- --- 34 and 40 8.75 8 51 2250 34 and 40 12 5.14 52 2250 8.75 6 103 4000 14 6 97 6000 45 and 50 14 6.65 81 3390 8.75 6 103 4000 14 6 97 6000 46 and 60 14 6.65 122 5100 70, 76, and 87 17 20 36 6600 80 17 10 53 8490 45 and 50 46, 60, and 76 70 and 87 100(2) 45 and 50 46, 60, and 76 70 and 87 14 6 118 6000 30 Inch Bar 6 92 10000 16 144 60 36,000 100(2) mm Maximum Handwheel Output Force(3) 1. Tangential handwheel force required to produce the handwheel output force shown. (Proportional to handwheel output force). 2. Top-mounted with gear drive. 3. Maximum force available to compress actuator spring. Table 7. Adjustable Travel Stop Styles (1) Actuator Size 30 34 40 45 46 50 60 and 667 Size 76 70 87 80 100 657 Up Stop 1 1 1 1 1 1 1 1 1 NOTE 2 NOTE 2 657 Down Stop 2 2 2 2 2 2 2 2 2 --- --- 12, 13(3), 14 12, 13(3), 14 12, 13(3), 14 12, 13(3), 14 12 12 13(3) --- 667 Up Stop 667 Down Stop 667 Up and Down Stop 12, 13(3), 12, 13(3), 12, 13(3), 14 14 14 10 --- 10 11 10 10 10 10 10 10 10 --- NOTE 2 11 11(4), P2(5) 11(4), P2(5) 11(4), P2(5) 11(4), P2(5) --- --- --- --- 1. See figure 4. 2. Top-mounted handwheel, see figure 2. 3. Adjustable handwheel up stop. 4. 38 mm (1.5 inch) maximum travel. 5. Adjustable handwheel up and down stop, 19 mm (0.75 inch) maximum travel. 11 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 Figure 5. Fisher 646 Electro-Pneumatic Transducer on 657 Actuator D100087X012 Figure 7. Fisher 4200 Position Transmitter on 667 Actuator W4917-1 Figure 6. Fisher 3582i Valve Positioner on 657 Actuator W4930 12 W4273-1 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Table 8. Dimensions ACTUATOR SIZE DIMENSION REFERENCE 30 657, -4 667, -4 0 38 25 38 25 38 38 38 38 38 38 38 C 289 333 333 406 473 D 54 54 71 71 71 657 657-4 657MO(1) 657-4 MO 440 --440 --- 498 --498 --- 548 --548 --- 659 --659 --- 667 667-4 667MO 657-4 MO 478 --478 --- 573 --573 --- 594 --594 --- 657 667 121 119 164 121 Hs --- Jc 171 Js K M B E 60 70 76 80 87 100 38 38 38 38 38 38 --38 ----- 38 38 ----- 536 406 473 536 473 635 536 729 71 90 90 90 90 127 127 127(2) 656 --656 --- --------- 722 --722 --- 722 --722 --- 840 994 976 1124 --------- 1075 --1183 --- 938 1089 1057 1204 NOTE 3 --NOTE 4 --- 768 --768 --- 748 --748 --- --------- 784 --784 --- 784 --784 --- 933 1070 1164 1314 881 --1112 --- 1257 --1392 --- 1003 1143 1245 1394 1857 --2346 --- 164 137 202 159 202 159 ----- 202 159 202 159 313 286 --159 227 --- 313 286 ----- 284 286 375 375 --- 378 378 292 222 303 292 401 222 222 222 222 356 222 222 356 356 356 356 --- --- 305 305 356 356 --- 356 356 432 432 432 432 406 657, -4 667, -4 213 194 222 224 272 244 291 310 291 310 395 --- 354 325 354 325 406 375 --375 435 432 780 419 451 451 657, -4 667, -4 ----- 226 214 248 248 306 362 306 362 ----- 370 378 370 378 446 446 --446 503 503 527 527 NOTE 5 2105 657 657MO 657-4MO ------- ------- ------- ------- ------- ------- ------- ------- --219 219 ------- 254 384 --- --219 219 ------- 667 667MO 667-4MO ------- ------- ------- ------- ------- ------- ------- ------- --219 219 --219 --- 254 384 --- --219 219 ------- 657, -4 667, -4 0.00 1.50 1.00 1.50 1.00 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 --1.50 ----- 1.50 1.50 ----- C 11.38 13.12 13.12 16.00 18.62 21.12 16.00 18.62 21.12 18.62 25.00 21.12 28.69 D 2.125 2.125 2.8125 2.8125 2.8125 2.8125 3.5625 3.5625 3.5625 3.5625 5 5 5(2) 657 657-4 657MO 657-4 MO 17.31 --17.31 --- 19.62 --19.62 --- 21.56 --21.56 --- 25.94 --25.94 --- 25.81 --25.81 --- --------- 28.44 --28.44 --- 28.44 --28.44 --- 33.06 39.12 38.44 44.25 --------- 42.31 --46.56 --- 36.94 42.88 41.62 47.38 NOTE 3 --NOTE 4 --- 667 667-4 667MO 657-4 MO 18.81 --18.81 --- 22.56 --22.56 --- 23.38 --23.38 --- 30.25 --30.25 --- 29.44 --29.44 --- --------- 30.88 --30.88 --- 30.88 --30.88 --- 36.75 42.12 45.81 51.75 34.70 --43.76 --- 49.50 --54.81 --- 39.50 45.00 49.00 54.88 73.12 --92.38 --- 657 667 4.75 4.69 6.44 4.75 6.44 5.38 7.94 6.25 7.94 6.25 ----- 7.94 6.25 7.94 6.25 12.31 11.25 --6.25 8.94 --- 12.31 11.25 ----- Hs --- 11.19 11.25 14.75 14.75 --- 14.88 14.88 11.50 11.50 11.94 11.50 15.78 Jc 6.75 8.75 8.75 8.75 8.75 14.00 8.75 8.75 14.00 8.75 14.00 14.00 --- Js --- 12.00 12.00 14.00 14.00 --- 14.00 14.00 17.00 17.00 17.00 17.00 16.00 Hc N 34 40 45 46 47 50 mm Inches B E Hc K 657, -4 667, -4 8.38 7.62 8.75 8.83 10.69 9.62 11.44 12.19 11.44 12.19 15.56 --- 13.94 12.81 13.94 12.81 16.00 14.75 --14.75 17.12 17.00 18.88 16.50 17.75 17.75 M 657, -4 667, -4 ----- 8.88 8.44 9.75 9.75 12.06 14.25 12.06 14.25 ----- 14.56 14.88 14.56 14.88 17.56 17.56 --17.56 19.81 19.81 20.75 20.75 NOTE 5 82.88 657 657MO 657-4MO ------- ------- ------- ------- ------- ------- ------- ------- --8.62 8.62 ------- 10.00 15.12 --- --8.62 8.62 ------- 667 667MO 667-4MO ------- ------- ------- ------- ------- ------- ------- ------- --8.62 8.62 --8.62 --- 10.00 15.12 --- --8.62 8.62 ------- N 1. MO = Manual operator. 2. Also available with 7 inch boss. 3. With group 1 springs, E=1959 mm (77.12 inch). With group 2 springs, E=1497 mm (58.94 inch). 4. With group 1 springs, E=2345 mm (92.31 inch). With group 2 springs, E=1883 mm (74.12 inch). 5. With group 1 springs, M=2103 mm (82.81 inch). With group 2 springs, M=1654 mm (65.12 inch). 13 Product Bulletin 657 and 667 Actuators 61.1:657 May 2012 D100087X012 Figure 8. Dimensions (also see table 8) AU6713-D 657, 667, 657-4, AND 667-4 SIZES 30 THROUGH 87 AU6713-D 657, 667, 657-4, AND 667-4 SIZES 30 THROUGH 87 A0171-2 40A8196 ALL TYPES SIZES 70, 80, 87, AND 667 SIZE 76 657 AND 667 SIZE 100 Ordering Information When ordering, specify: 8. Seismic requirements, if critical 9. Ambient temperature range Application 1. On-off or throttling service Actuator and Positioner 2. Input signal range Be sure to specify: actuator type number; whether a positioner is required; whether a top-mounted handwheel is required; and whether an adjustable up or down travel stop is required. Refer to the Specifications section. Review the information under each specification and in the referenced tables and figures. Specify the desired choice wherever there is a selection to be made. 3. Maximum supply pressure 4. Valve body type and size with which the actuator will be used 5. Valve plug travel 6. Actuator thrust required with actuator stem both fully retracted and fully extended Valve Body and Accessories 7. Stroking time requirements, if critical Refer to the separate valve body bulletin and bulletins covering accessories for ordering information. 14 657 and 667 Actuators D100087X012 Product Bulletin 61.1:657 May 2012 15 Product Bulletin 61.1:657 May 2012 657 and 667 Actuators D100087X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher and easy-e are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Emerson Process Management Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Chatham, Kent ME4 4QZ UK Dubai, United Arab Emirates Singapore 128461 Singapore www.Fisher.com E 161990, 2012 Fisher Controls International LLC. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.5.0 (Windows) Modify Date : 2012:04:11 11:01:47-05:00 Create Date : 2012:04:11 11:01:14-05:00 Metadata Date : 2012:04:11 11:01:47-05:00 Format : application/pdf Title : untitled Document ID : uuid:4e863f68-1c9f-4cd0-b52d-a286c5e261bc Instance ID : uuid:ffdf1d29-45a9-4479-89c5-8dea3e616908 Page Count : 16EXIF Metadata provided by EXIF.tools