Emerson Fisher Baumann 87000 Data Sheet

: Emerson Emerson-Fisher-Baumann-87000-Data-Sheet-680832 emerson-fisher-baumann-87000-data-sheet-680832 emerson pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Baumann™ 87000 Flexsleev Sanitary
Control Valve
The Baumann 87000 control valve is excellent for
throttling high purity liquid or gaseous media
commonly found in the food and beverage,
pharmaceutical, film, and biotechnology industries.
The valve is suitable for repeated steam sterilization
cycles with 2.4 bar (35 psi) maximum steam pressures.
Assembly of valve body sections using only two bolts
allows for ease of cleaning and inspection. A lower
telltale port is provided. The valve will drain either
horizontally or vertically with the actuator in the
horizontal position. In contrast to diaphragm valves,
the operation is not affected by vacuum.

Features


Unique flow pattern allows for self-draining in both
vertical and horizontal pipelines



Streamlined low shear flow contours make it ideal
for sensitive biomedia



Electropolished, wetted interior finishes to ≤ 30 Ra
microinch (≤ 20 Ra microinch optional)



Flow area between tubing O.D. and valve body
seating is suitable for fine particulate media



Full and reduced port orifices available to optimize
sizing



Foolproof bolting method assists with ease of valve
body disassembly and reassembly



Epoxy powder-coated actuator with stainless steel
yoke and fasteners for maximum corrosion
resistance



Fisherr FIELDVUE™ digital valve controller available
for remote calibration and diagnostics in facilities
utilizing the PlantWeb™ architecture

www.Fisher.com

W9823

Baumann 87000 Valve Shown in Recommended
Mounting Position for Self-Draining

W9824

Baumann 87000 Valve with
FIELDVUE DVC2000 Digital Valve Controller

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Figure 1. Baumann 87000 Flexsleev Valve Assembly

E1295

Table 1. Materials of Construction
Key
Number

Description

Material

1

Valve Body

ASTM SA479 (S31600/S31603)

2

Bonnet, Upper

ASTM SA479 (S31600/S31603)

3

Bonnet, Lower

ASTM SA479 (S31600/S31603)

4

Shaft

S21800 SST

5

Ceramic Ball

Grade 25 Ceramic

6

Sleeve Bushing

S30300 Stainless Steel

7

Sleeve

Silicone, fluorocarbon (FKM), EPDM,
Perfluoroelastomer (FFKM)

8

Anvil

S21800

O-Ring

Silicone, fluorocarbon (FKM), EPDM,
Perfluoroelastomer (FFKM)

10

Spring Stem

Passivated Stainless Steel

11

Retaining Ring

S15700

12

Hex Head Cap Screw

18-8 Stainless Steel

9

2

13

Spring Seat

PA Nylon 6/6

14

Protecting Cap

S30300 Stainless Steel

15

Alignment Pin

18-8 Stainless Steel

16

Drive Nut, (Yoke)

S31600 SST (ASTM A194 Grade 8M)

27

Jam Nut (locknut)

B8 Stainless Steel

50

O-Ring

Fluorocarbon (FKM)

58

Travel Indicator

ASTM A240 S30400

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Mode of Operation
As shown in figure 2, a flexible sleeve is inserted
through the length of the valve and sealed between

the valve body and bonnet by O-rings. The
actuator-motivated valve stem has a tapered groove
that pushes a ceramic ball against the inside of the
sleeve and, thereby, the sleeve against a valve seat.

Figure 2. Mode of Operation

SHOWN 90 DEGREES
OUT OF POSITION FOR
CLARITY

FLOW

E1296

OPEN

CLOSED

Table 2. Technical Specifications
18.9 bar CWP (275 psi CWP)

Valve Body Rating
Nominal Size

17.7 mm (NPS 1/2)

Connections

17.7 mm (0.5 inch), Tri-Clover / Tri-Clamp (Welded Ends Optional)

Seat Leakage

Class VI

Bonnet

Bolted

Characteristic

Modified Linear

Internal Valve Body Finish (Wetted
Interior)

< 30 Ra Microinch / 0.76 Ra Micron (standard)
< 20 Ra Microinch / 0.51 Ra Micron (optional - or as required)

Maximum Operating Temperature

Refer to table 3

Available Certificates(1)

USP CL VI, 21CFR 177(1)

1. Consult your Emerson Process Management sales office for applicable materials.

3

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Table 3. Sleeve Material Temperature Chart
SLEEVE MATERIAL(1)

TEMPERATURE RANGE(3)

Silicone

-62 to 232_C (-80 to 450_F)

Silicone (steam)

-17 to 135_C (0 to 275_F)

Fluorocarbon (general service)

-17 to 204_C (-0 to 400_F)

Fluorocarbon (water or steam service)

-17 to 37_C (-0 to 100_F)

EPDM

-40 to 148_C (-40 to 300_F)

Perfluoroelastomer(2)

-17 to 248_C (-0 to 480_F)

SEAT
LEAKAGE

FLOW
DIRECTION

VI

To Open

MAXIMUM SHUTOFF
PRESSURE
psi
bar

150

1. Medical grade in compliance with FDA 21CFR 177.
2. Please consult your Emerson Process Management sales office before ordering perfluoroelastomer.
3. Sleeve material temperature limitations may reduce allowable shutoff pressures.

Table 4. Actuator Specifications
Type

4

16 Multi-Spring Diaphragm (Single Acting)

Nominal Size

103 cm2 / 16 in2

Air Failure

Open or Closed (Field Reversible)

Bench Spring Range

0.3- 0.9 bar (4-13 psi), fail open / 0.3-1.0 bar (4-15 psi) fail closed

Travel

7.93 mm / 0.3125 inch

Ambient Temperature Range

-29 to 71_C (-20 to 160_F)

Maximum Air Pressure

2.4 barg / 35 psig

Diaphragm Material

Neoprene, Polyester

Spring Cases

Steel, Powder Epoxy-Coated Appliance White per
FDA 21 CFR 175.300 with Stainless Steel Fasteners

Yoke

CF8M stainless steel

Weight

2.1 kg (4.6 lbs)

10.35

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Table 5. Flow Coefficients (ASME/ISA/IEC) and ISA Sizing Factors
PLUG
TRAVEL
mm
(INCH)
7.9
(0.3125)

ORIFICE
DIAMETER
mm
(INCH)
3.18
(0.125)

5

10

20

30

40

50

60

70

80

90

100

0.002
5

0.005

0.012
5

0.033

0.065

0.125

0.18

0.19

0.215

0.22

9.40
(0.370)

0.003
0

0.020

0.12

0.24

0.40

0.532

0.69

0.85

1.0

1.15

Cv AT VALVE OPENING - PERCENT OF PLUG TRAVEL

FL

Fd

XT

KC

0.25

0.87

0.56

0.63

0.66

1.25

0.87

0.40

0.63

0.66

Table 6. Weights
VALVE
Size

POSITIONER(1)

ACTUATOR

Travel

Weight

Baumann 16

FIELDVUE DVC2000

FIELDVUE DVC6010

DN

NPS

mm

Inch

kg

lb

kg

lb

kg

lb

kg

lb

15

1/2

7.9

0.3125

3.6

8

4.5

10

1.5

3.3

3.5

7.7

1. Not available with Fisher 3660/3661 positioner.

Figure 3. Dimensions
87000 WITH BAUMANN 16 ACTUATOR AND FIELDVUE DVC2000 SHOWN IN
RECOMMENDED MOUNTING POSITION FOR SELF-DRAINING (TOP VIEW SHOWN AT RIGHT)

166
(6.52)

E1299

127 (5.0)

mm
(inch)

5

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Figure 4. Dimensions
87000 WITH BAUMANN 16 ACTUATOR SHOWN IN RECOMMENDED
MOUNTING POSITION FOR SELF-DRAINING

26
(1.03)

21
(0.83)

FLOW

146
(5.8)

9
(0.34)

38
(1.5)

159
(46.25)

SELF-DRAIN
ANGLE
2 DEGREES

70
(2.75)

21
(0.83)

27
(1.05)

FLOW

mm
(inch)

9
(0.34)

RECOMMENDED MOUNTING FOR SELF-DRAINING (ACTUATOR SHOULD BE MOUNTED HORIZONTALLY)

E1297

NOTE: ACTUATOR REQUIRES 115mm (4.5 INCHES) VERTICAL CLEARANCE.

6

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Figure 5. Dimensions
87000 WITH BAUMANN 16 ACTUATOR AND FIELDVUE DVC6000 SHOWN IN
RECOMMENDED MOUNTING POSITION FOR SELF-DRAINING
(TOP VIEW SHOWN AT RIGHT)

26
(1.03)

146
(5.8)

6
(40.25)

159
(46.25)

205

211
(8.3)

(48.06)

250
(9.8)

R228
(R9.0)

mm
(inch)
E1298

RECOMMENDED MOUNTING FOR SELF-DRAINING (ACTUATOR SHOULD BE MOUNTED HORIZONTALLY)

NOTE: ACTUATOR REQUIRES 115mm (4.5 INCHES) VERTICAL CLEARANCE.

7

Product Bulletin

87000 Valve

52.1:87FS
November 2011

D103345X012

Table 7. Model Numbering System
16

87

ACTUATOR

87000

16

MAX Cv
Cv

Kv

END CONNECTIONS

SLEEVE MATERIAL

00

0.25

0.22

1

Tri-Clamp

S

01

1.25

1.08

3

Special

E

EPDM

V

Fluorocarbon

K

Perfluoroelastomer(1)

Silicone

1. Consult your Emerson Process Management sales office.

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Baumann, Fisher, FIELDVUE, and PlantWeb are marks owned by one of the companies in the Emerson Process Management business division of Emerson
Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are
the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com
EFisher
Controls International LLC 2009, 2011; All Rights Reserved
8



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 8
XMP Toolkit                     : XMP toolkit 3.0-28, framework 1.6
About                           : uuid:0f491be7-1279-41f3-80aa-29015eb56ce1
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Create Date                     : 2011:10:11 10:32:24-05:00
Modify Date                     : 2011:10:19 11:51:40-05:00
Metadata Date                   : 2011:10:19 11:51:40-05:00
Document ID                     : uuid:a567453c-d519-4ce4-95f9-fb80942eea45
Instance ID                     : uuid:0f491be7-1279-41f3-80aa-29015eb56ce1
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools