Emerson Fisher Control Disk Data Sheet
2015-03-30
: Emerson Emerson-Fisher-Control-Disk-Data-Sheet-680528 emerson-fisher-control-disk-data-sheet-680528 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Fisherr Control-Disk™ Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk valve maintains tight shutoff, is available in a fire-tested version, and can be specified for cryogenic applications. The Control-Disk valve is available as a flangeless (wafer), lugged, or double flange design. A splined drive shaft combines with a variety of spring-and-diaphragm or pneumatic piston actuators to make the Control-Disk a reliable control valve for a variety of throttling applications in the various process industries. The Control-Disk valve can be supplied with one of several dynamic seals (figure 1) that can be used in a variety of demanding applications. With the appropriate seal selection and materials of construction, the pressure-assisted seal provides excellent shutoff against the full CL150 or 300 pressure ratings. Features Equal percentage flow characteristic– An equal percentage flow characteristic provides an improved throttling range comparable to that of a segmented ball valve. This improved capability allows you to control closer to the target set point, regardless of process disturbances, which results in a reduction in process variability. Economical Tight Shutoff– The pressure-assisted seal design provides tight shutoff against the full pressure rating of the specified valve. www.Fisher.com X0686 Fisher Control-Disk Valve Shaft Retention– Shaft blowout protection is designed into the Control-Disk valve (figure 2). The anti-blowout gland fits securely over the valve shaft which has been turned down to form a circumferential shoulder that contacts the anti-blowout gland. Excellent Flow Control–With a modified equal percentage flow characteristic, the Control-Disk can be used for throttling applications through 90 degrees of disk rotation. Rangeability is 100 to 1. High-Temperature / Cryogenic Capabilities– Optional valve constructions allow this valve to meet both high-temperature and cryogenic applications. Sour Service Capability– Trim and bolting materials are available for applications involving sour liquids and gases. These constructions comply with NACE MR0175-2002, MR0103, and MR0175 / ISO 15156. Spline-ended Shaft– The splined shaft with clamped lever and single-pivot linkage reduces lost motion between the actuator and the valve shaft. Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Application Versatility–Standard construction materials and seal assemblies provide long life and outstanding performance in a broad range of liquid and gas applications. Easy Installation–The valve body self-centers on the line flange bolts as a fast, accurate means of centering the valve in the pipeline. Reliable Flange Gasketing Surface–Seal retainer screws are located so there is no interference with the sealing function of either flat sheet or spiral wound line flange gaskets. Powder paint as standard– The Emerson Process Managementt powder paint finish offers an excellent corrosion-resistant finish to all steel parts. Excellent Emissions Capabilities– The optional ENVIRO-SEALt packing systems, are designed with very smooth shaft surfaces and live-loading to provide improved sealing, guiding, and loading force transmission. The seal of the ENVIRO-SEAL system can control emissions to below 100 ppm (parts per million). Control-Disk NPS 14-24 Valve Specifications and Materials of Construction Table 1. Fisher Control-Disk NPS 14-24 Valve Specifications SPECIFICATION ASME Valve Body Size NPS 14, 16, 18, 20, and 24 Pressure Rating Consistent with CL150 and 300 per ASME B16.34(1) WCC Steel Valve Body Materials CF8M Stainless Steel Disk Materials CF8M Stainless Steel End Connections Mates with RF flanges per ASME B16.5 Valve Body Style Wafer, Lugged, or Double Flange Shaft Connection Spline Wafer and Lugged: MSS SP68 and API 609 Double Flange Class 150: ISO 5752 Butterfly Valve Short Series Face-to-Face Dimensions Double Flange Class 300: ISO 5752 Butterfly Valve Long Series Soft Seal: Bidirectional ANSI/FCI 70-2 Class VI Shutoff NOVEX Seal: Unidirectional ANSI/FCI 70-2 1% of Class IV Flow Direction Reverse (flow direction is into the shaft side of the disk) Phoenix III Seal: ANSI/FCI 70-2 Class VI Flow Characteristic Equal Percentage Disk Rotation Clockwise (CW) to close 1. See tables 4 and 5 for additional information. The pressure/temperature limits in this bulletin and any applicable standard limitation should not be exceeded. Table of Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Seal Configurations . . . . . . . . . . . . . . . . . . . Pressure Drops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 2 3 3 7 Tables Materials of Construction and Temperature Ranges 5 Valve/Actuator Combinations . . . . . . . . . . . . . . . . . . . 6 Maximum Shutoff Pressure Drops . . . . . . . . . . . . . . . 7 Dimensions and Weights . . . . . . . . . . . . . . . . . . . . . . 10 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Figure 1. Available Seal Configurations BACKUP RING GRAPHITE GASKET BODY SEAL RING BACKUP RING RETAINING RING RETAINING RING VALVE DISC HIGH PRESSURE 2 AT SHUTOFF METAL SEAL RING VALVE DISC SOFT SEAL WITH BACK-UP O-RING PHOENIX III FIRE-TESTED SEAL RESILIENT INSERT HIGH PRESSURE AT SHUTOFF 1 BODY GRAPHITE GASKET RETAINING RING VALVE DISC E0578 BODY NOVEX SEAL NOVEX SEAL RING HIGH PRESSURE AT SHUTOFF 1 Notes: 1 This unidirectional seal must be installed so that the retaining ring is downstream from the high pressure side of the valve at shutoff, as shown. 2 For this bidirectional seal, The “preferred” valve orientation places the retaining ring downstream from the high pressure side of the valve at shutoff. Installation Recommended or “preferred” installation for Control-Disk NPS 14-24 valves is with the flow into the shaft side of the disk (retaining ring downstream from the high pressure side of the valve). The standard soft seal offers ANSI/FCI 70-2 Class VI, bidirectional shutoff. The Phoenix III seal should be installed in the preferred direction to obtain optimal shutoff performance, and it must be installed in the preferred direction for fire-tested applications. The NOVEX seal is uni-directional and should be installed in the preferred direction. For assistance in selecting the appropriate combination of actuator action and open valve position, contact your Emerson Process Management sales office. Standard Seal Configurations Standard Soft Seal (PTFE)-- A resilient dynamic seal with an elastomeric back-up ring for low to moderate temperature applications. NOVEX Seal-- The NOVEX stainless steel seal is available for severe service, Cryogenic, and high-temperature applications. Phoenix III Seal-- This three-component, metal-and-polymeric seal is available for severe service with low to moderate temperature applications. 3 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Figure 2. Blowout Protection HEX NUT SHAFT LUBRICANT SPRING PACK ASSEMBLY PACKING FLANGE HEX NUT ANTI-BLOWOUT FLANGE HEX NUT ANTIBLOWOUT FLANGE SHAFT SHOULDER STUD HEX NUT SHAFT SHOULDER ANTI-EXTRUSION RING PACKING FOLLOWER PACKING SET TYPICAL PTFE V-RING PACKING A7090 STANDARD PACKING ARRANGEMENT Figure 3. Typical Valve Assembly DISK THRUST BEARING PACKING BOX RING ENVIRO-SEAL ARRANGEMENT (PTFE SHOWN) SEAT RETAINING RING UPPER SHAFT DISK PINS BEARINGS THRUST BEARING GASKET RETAINER A7093 ANTI-BLOWOUT GLAND ANTI-BLOWOUT FOLLOWER PACKING FOLLOWER GASKET 4 STUD PACKING FLANGE VALVE BODY Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Table 2. Materials of Construction and Temperature Ratings COMPONENTS AND MATERIALS OF CONSTRUCTION TEMPERATURE RANGE _C _F Valve Body WCC CF8M (316 SST) —29 to 427 —198 to 538 —20 to 800 —325 to 1000 Disk CF8M (316 SST) —198 to 538 —325 to 1000 —254 to 316 -254 to 593 -254 to 816 —425 to 600 -425 to 1100 -425 to 1500 —198 to 538 —73 to 427 -254 to 482 -254 to 704 —325 to 1000 —100 to 800 -425 to 900 -425 to 1300 —73 to 149 —198 to 816 —198 to 816 —100 to 300 —325 to 1500 —325 to 1500 —198 to 232 —198 to 916 —198 to 538 -198 to 315 —325 to 450 —325 to 1500 —325 to 1000 -325 to 600 —29 to 93 —43 to 149 —54 to 182 —29 to 204 —20 to 200 —45 to 300 —65 to 360 —20 to 400 —29 to 93 —43 to 93 —54 to 93 —29 to 93 —20 to 200 —45 to 200 —65 to 200 -20 to 200 —40 to 149 —54 to 149 —62 to 204 —40 to 232 —29 to 816 -29 to 816 —40 to 300 —65 to 300 —80 to 400 —40 to 450 —20 to 1500 —20 to 1500 Disk Edge Coating Chrome Plating (Standard with NOVEX or Phoenix III Seals) Chrome Coating Chrome Carbide Coating Shaft S20910 S17400 (H1025) N00550 N07718 Bearings(3) PEEK (standard) S31600 Nitrided(1) R30006 (Alloy 6) Packing PTFE Packing and PTFE ENVIRO-SEAL Packing Graphite packing Graphite packing with oxidizing media Graphite ENVIRO-SEAL Packing PTFE Seal Ring Nitrile Backup O-Ring Chloroprene Backup O-Ring EPR Backup O-Ring Fluorocarbon Backup O-Ring UHMWPE(2) Seal Ring (CL150 Only) Nitrile Backup O-Ring Chloroprene Backup O-Ring EPR Backup O-Ring Seal Ring Fluorocarbon Backup O-Ring Phoenix III and/or Fire Tested Construction S31600 and PTFE Seal Ring with Nitrile Backup O-Ring Chloroprene Backup O-Ring EPR Backup O-Ring Fluorocarbon Backup O-Ring NOVEX S31600 Seal(1) Ring NOVEX S21800 Seal(1) Ring (CL300 only) 1. For a complete material description, contact your Emerson Process Management sales office. 2. UHMWPE stands for ultra high molecular weight polyethylene. 3. Special thrust bearings are required for high temp. applications over 343_C (650_F) (with 6 and 12-inch shaft extensions). Constructions with carbon steel valves and SST disks may require special thrust bearings at temps. less than 343_C (650_F). 5 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Table 3. Valve/Actuator Combinations SELECTION GUIDELINES TEMPERATURE RANGE 1052, 1061 or 2052 From -46 to 343_C (-50 to 650_F) Valve (select appropriate trim) and standard actuator Mounting positions 1 and 3 From 343 to 426_C (650 to 800_F) Valve (select appropriate trim) and standard actuator From 426 to 538_C (800 to 1000_F)(1) Valve (select appropriate trim) and standard actuator Mounting positions 1 and 3 1. Consult your Emerson Process Management sales office. Figure 4. Mounting Styles and Positions STYLE D STYLE C POSITION 1 STANDARD POSITION 1 STANDARD 2 4 3 3 STYLE A STYLE B POSITION 1 STANDARD NORMAL FLOW 2 6 POSITION 1 STANDARD 4 2 4 3 GE37285 NORMAL FLOW 4 2 3 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Pressure Drops Pressure drop limits of any given valve are based on valve body, and trim material limits. To find the appropriate pressure drop limitation, choose the desired valve size and temperature range. Then search table 4 for body limitations and table 5 for trim limitations. Information on limits for S31254, CW2M, M35-1 and other alloy constructions can be obtained by contacting your Emerson Process Management sales office. The lowest number from the tables is the appropriate limit. The tables for both trim and body limits must be consulted. Table 4. Maximum Allowable Shutoff Pressure Drops (Valve Ratings) Based on Carbon Steel and Stainless Steel Valve Types (The tables for both trim and body limits must be consulted.) TEMPERATURE RANGE PRESSURE RANGE CL150 WCC CL300 CF8M WCC CF8M Bar _C -254 to -29 --- 19.0 --- 49.6 -29 to 38 20 19.0 51.7 49.6 93 17.9 16.2 51.7 42.7 149 15.9 14.8 50.3 38.6 204 13.8 13.4 48.6 35.5 260 11.7 11.7 45.9 33.1 316 9.7 9.7 41.7 31.0 343 8.6 8.6 40.7 30.3 371 7.6 7.6 38.3 30.0 399 6.6 6.6 34.8 29.3 427 5.5 5.5 28.3 29.0 454 --- 4.5 --- 29.0 482 --- 3.4 --- 28.6 510 --- 2.4 --- 26.5 538 --- 1.4 --- 25.2 Psi _F -450 to -20 --- 275 --- 720 -20 to 100 290 275 750 720 200 260 235 750 620 300 230 215 730 560 400 200 195 705 515 500 170 170 665 480 600 140 140 605 450 650 125 125 590 440 700 110 110 555 435 750 95 95 505 425 800 80 80 410 420 850 --- 65 --- 420 900 --- 50 --- 415 950 --- 35 --- 385 1000 --- 20 --- 365 7 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Table 5. Maximum Allowable Shutoff Pressure Drops(1) Metric Based on Trim (Seal and Bearing) and with S17400 (H1025) Shaft Except Where Noted TRIM TEMPERATURE RANGE CL150, VALVE BODY SIZE, NPS 14 16 18 20 NOVEX (S31600) Seal and PEEK Bearing NOVEX (S21800)(2) Seal and PEEK Bearing Phoenix III Seal and PEEK Bearing Phoenix III Seal and S31600 Nitrided Bearing NOVEX (S31600) Seal and S31600 Nitrided Bearing NOVEX (S21800)(2) Seal and S31600 Nitrided Bearing 16 18 20 24 -46 to 38 20.0 20.0 20.0 20.0 20.0 51.7 51.7 51.7 51.7 51.7 38 to 93 20.0 20.0 20.0 20.0 20.0 43.6 43.6 43.6 43.6 43.6 93 to 149 20.0 20.0 20.0 20.0 20.0 27.6 27.6 27.6 27.6 27.6 -46 to 38 20.0 20.0 20.0 20.0 20.0 22.1 22.1 22.1 22.1 22.1 38 to 93 17.9 17.9 17.9 17.9 17.9 22.1 22.1 22.1 22.1 22.1 93 to 149 15.9 15.9 15.9 15.9 15.9 22.1 22.1 22.1 22.1 22.1 -46 to 38 51.7 44.7 51.7 51.7 51.7 38 to 93 49.0 40.6 51.7 51.7 51.7 93 to 149 46.1 38.1 50.3 50.3 50.3 -46 to 38 20.0 20.0 20.0 19.2 20.0 51.7 47.6 51.7 51.7 51.7 38 to 93 20.0 20.0 20.0 16.9 20.0 51.7 43.2 51.7 51.7 51.7 93 to 149 20.0 18.5 19.2 15.6 20.0 39.3 39.3 39.3 39.3 39.3 -46 to 38 20.0 17.1 18.8 15.3 20.0 48.6 36.3 51.7 51.7 51.7 38 to 93 18.1 14.8 16.6 13.5 20.0 44.2 32.6 51.7 51.5 51.7 93 to 149 16.5 13.5 15.4 12.5 20.0 39.3 30.5 39.3 39.3 39.3 149 to 204 15.4 12.6 14.5 11.7 20.0 26.9 26.9 26.9 26.9 26.9 204 to 232 15.0 12.2 14.1 11.4 20.0 20.7 20.7 20.7 20.7 20.7 -46 to 38 20.0 20.0 20.0 20.0 20.0 22.1 22.1 22.1 22.1 22.1 38 to 93 17.9 17.9 17.9 17.9 17.9 22.1 22.1 22.1 22.1 22.1 93 to 149 15.9 15.9 15.9 15.9 15.9 22.1 22.1 22.1 22.1 22.1 149 to 232 12.8 12.8 12.8 12.8 12.8 17.5 17.5 17.5 17.5 17.5 232 to 343 8.6 8.6 8.6 8.6 8.6 13.7 13.7 13.7 13.7 13.7 343 to 427 5.5 5.5 5.5 5.5 5.5 12.8 12.8 12.8 12.8 12.8 427 to 482(3) 3.4 3.4 3.4 3.4 3.4 12.5 12.5 12.5 12.5 12.5 482 to 538(3) 1.4 1.4 1.4 1.4 1.4 12.3 12.3 12.3 12.3 12.3 -46 to 38 43.3 34.5 51.7 51.7 51.7 38 to 93 39.3 31.1 51.7 51.7 51.7 93 to 149 36.9 29.0 50.3 50.3 50.3 149 to 232 34.5 27.0 47.2 47.2 47.2 232 to 343 32.4 25.1 40.0 40.0 40.0 343 to 427 31.2 24.0 29.0 29.0 29.0 427 to 482(3) 28.6 28.6 28.6 28.6 28.6 482 to 538(3) 25.2 25.2 25.2 25.2 25.2 1. Consult your Emerson Process Management sales office if higher pressure drops are required. 2. NOVEX S21800 seal is available for CL300 only. 3. N07718 shaft must be specified above 427_C. 8 14 Pressure Range, Bar _C Soft Seal and PEEK Bearing CL300, VALVE BODY SIZE, NPS 24 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Table 6. Maximum Allowable Shutoff Pressure Drops(1) U.S. Traditional Units Based on Trim (Seal and Bearing) and with S17400 (H1025) Shaft Except Where Noted TRIM TEMPERATURE RANGE CL150, VALVE BODY SIZE, NPS 14 16 18 20 14 16 18 20 24 Pressure Range, Psi _F Soft Seal and PEEK Bearing CL300, VALVE BODY SIZE, NPS 24 -50 to 100 290 290 290 290 290 750 750 750 750 750 100 to 200 290 290 290 290 290 633 633 633 633 633 200 to 300 290 290 290 290 290 400 400 400 400 400 NOVEX (S31600) Seal and PEEK Bearing -50 to 100 290 290 290 290 290 320 320 320 320 320 100 to 200 260 260 260 260 260 320 320 320 320 320 200 to 300 230 230 230 230 230 320 320 320 320 320 NOVEX (S21800)(2) Seal and PEEK Bearing -50 to 100 750 649 750 750 750 100 to 200 711 589 750 750 750 Phoenix III Seal and PEEK Bearing Phoenix III Seal and S31600 Nitrided Bearing NOVEX (S31600) Seal and S31600 Nitrided Bearing NOVEX (S21800)(2) Seal and S31600 Nitrided Bearing 200 to 300 668 553 730 730 730 -50 to 100 290 290 290 278 290 750 691 750 750 750 100 to 200 290 290 290 245 290 750 627 750 750 750 200 to 300 290 269 278 226 290 570 570 570 570 570 -50 to 100 290 248 272 222 290 705 526 750 750 750 100 to 200 262 215 241 196 290 641 473 750 747 750 200 to 300 240 196 223 181 290 570 442 570 570 570 300 to 400 224 183 210 170 290 390 390 390 390 390 400 to 450 217 177 204 166 290 300 300 300 300 300 -50 to 100 290 288 290 290 290 320 320 320 320 320 100 to 200 260 258 260 260 260 320 320 320 320 320 200 to 300 230 230 230 230 230 320 320 320 320 320 300 to 450 185 185 185 185 185 254 254 254 254 254 450 to 650 125 125 125 125 125 198 198 198 198 198 650 to 800 80 80 80 80 80 186 186 186 186 186 800 to 900(3) 50 50 50 50 50 182 182 182 182 182 900 to 1000(3) 20 20 20 20 20 179 179 179 179 179 -50 to 100 628 501 750 750 750 100 to 200 570 451 750 750 750 200 to 300 535 421 730 730 730 300 to 450 501 391 685 685 685 450 to 650 470 364 580 580 580 650 to 800 452 348 420 420 420 800 to 900(3) 415 415 415 415 415 900 to 1000(3) 365 365 365 365 365 1. Consult your Emerson Process Management sales office if higher pressure drops are required. 2. NOVEX S21800 seal is available for CL300 only. 3. N07718 shaft must be specified above 800_F. 9 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Figure 5. Dimensions and Weights, CL150 (also see table 7) C D B T D A 4X V A K B T C K S M S M V 4X P THRU J BOLT CIRCLE WAFER STYLE R PACKING CLEARANCE N 4X P THRU J BOLT CIRCLE LUGGED STYLE R PACKING CLEARANCE B D T C N E A K M 4X V J BOLT CIRCLE EACH SIDE S 4X P THRU S R PACKING CLEARANCE N H THRU J BOLT CIRCLE DOUBLE FLANGE STYLE Table 7. Dimensions, CL150 VALVE SIZE, NPS CL150 DIMENSION A B E H J K M N P R S T V(4) 1-1/8 8 holes 476 31.8 235 46.0 17.5 117 338 208 1-8 12 holes 108 1-1/8 12 holes 540 31.8 235 46.0 17.5 117 384 208 1-8 16 holes 349 111 1-1/4 12 holes 578 39.7 273 50.8 20.6 133 432 356 1 1/8-8 16 holes 432 381 114 1-1/4 16 holes 635 44.5 273 50.8 20.6 133 480 356 1 1/8-8 20 holes 492 438 133 1-3/8 16 holes 749 57.2 337 76.2 23.9 155 594 356 1 1/4-8 20 holes (1) (2) (3) (1, 2) (3) C D (3) (3) 14 422 530 533 91.9 191 327 295 95.3 16 465 607 597 102 216 371 318 18 529 645 635 114 222 400 20 584 695 699 127 229 24 692 822 813 154 267 mm inches 14 16.62 20.88 21.00 3.62 7.50 12.88 11.62 3.75 1-1/8 8 holes 18.75 1-1/4 9.25 1.81 0.69 4.62 13.31 8.19 1-8 12 holes 16 18.31 23.88 23.50 4.00 8.50 14.62 12.50 4.25 1-1/8 12 holes 21.25 1-1/4 9.25 1.81 0.69 4.62 15.12 8.19 1-8 16 holes 18 20.81 25.38 25.00 4.50 8.75 15.75 13.75 4.38 1-1/4 12 holes 22.75 1-9/16 10.75 2.00 0.81 5.25 17.00 14.00 1 1/8-8 16 holes 20 23.00 27.38 27.50 5.00 9.00 17.00 15.00 4.50 1-1/4 16 holes 25.00 1-3/4 10.75 2.00 0.81 5.25 18.88 14.00 1 1/8-8 20 holes 24 27.25 32.38 32.00 6.06 10.50 19.38 17.25 5.25 1-3/8 16 holes 29.50 2-1/4 13.25 3.00 0.94 6.12 23.38 14.00 1 1/4-8 20 holes 1. Wafer Style Valve 2. Lugged Style Valve 3. Double Flange Style Valve 4. Wafer and Double Flange styles have 4 holes 10 Product Bulletin Control-Disk NPS 14-24 Valve 51.3:Control-Disk NPS 14-24 October 2013 D103471X012 Figure 6. Dimensions and Weights, CL300 (also see table 8) D C B T D C A 4X V B T A K K M M S S V J BOLT CIRCLE 4X P THRU R PACKING CLEARANCE N J BOLT CIRCLE 4X P THRU N LUGGED STYLE WAFER STYLE R PACKING CLEARANCE B D T C E A K M 4X V J BOLT CIRCLE EACH SIDE S S 4X P THRU R PACKING CLEARANCE N H THRU J BOLT CIRCLE DOUBLE FLANGE STYLE Table 8. Dimensions, CL300 VALVE SIZE, NPS CL300 DIMENSION A B E H J K M N P R S T V(4) 1-1/4 16 holes 514 44.5 273 50.8 20.6 124 339 356 1 1/8-8 16 holes 155 1-3/8 16 holes 572 44.5 273 50.8 20.6 130 383 356 1 1/4-8 20 holes 384 165 1-3/8 20 holes 629 57.2 337 76.2 23.9 143 430 356 1 1/4-8 24 holes 483 416 175 1-3/8 20 holes 686 76.2 337 76.2 23.9 187 478 265 1 1/4-8 24 holes 546 483 195 1-5/8 20 holes 813 76.2 337 76.2 23.9 202 575 265 1 1/2-8 24 holes (1) (2) (3) (1, 2) (3) C D (3) (3) 14 436 594 584 117 290 363 319 145 16 498 657 648 133 310 397 353 18 556 721 711 149 330 419 20 605 784 767 159 350 24 716 924 914 181 390 mm inches 14 17.19 23.38 23.00 4.62 11.41 14.31 12.56 5.70 1-1/4 16 holes 20.25 1-3/4 10.75 2.00 0.81 4.88 12.65 14.00 1 1/8-8 16 holes 16 19.62 25.88 25.50 5.25 12.20 15.63 13.88 6.10 1-3/8 16 holes 22.50 1-3/4 10.75 2.00 0.81 5.12 15.07 14.00 1 1/4-8 20 holes 18 21.88 28.38 28.00 5.88 13.00 16.50 15.12 6.50 1-3/8 20 holes 24.75 2-1/4 13.25 3.00 0.94 5.62 16.91 14.00 1 1/4-8 24 holes 20 23.81 30.88 30.20 6.25 13.78 19.00 16.38 6.89 1-3/8 20 holes 27.00 3 13.25 3.00 0.94 7.38 18.80 10.44 1 1/4-8 24 holes 24 28.19 36.38 36.00 7.12 15.35 21.50 19.00 7.67 1-5/8 20 holes 32.00 3 13.25 3.00 0.94 7.94 21.69 10.44 1 1/2-8 24 holes 1. Wafer Style Valve 2. Lugged Style Valve 3. Double Flange Style Valve 4. Wafer and Double Flange styles have 4 holes 11 Product Bulletin 51.3:Control-Disk NPS 14-24 October 2013 Control-Disk NPS 14-24 Valve D103471X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher, Control-Disk, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Emerson Process Management Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Chatham, Kent ME4 4QZ UK Dubai, United Arab Emirates Singapore 128461 Singapore www.Fisher.com E 122013 Fisher Controls International LLC. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2013:10:02 10:08:46-05:00 Modify Date : 2013:10:02 10:09:24-05:00 Metadata Date : 2013:10:02 10:09:24-05:00 Producer : Acrobat Distiller 9.5.1 (Windows) Format : application/pdf Title : untitled Document ID : uuid:41c6fb89-89de-449b-a466-2aada3065ce7 Instance ID : uuid:61ff788d-868f-43c6-bee1-0509c0c3fe5a Page Count : 12EXIF Metadata provided by EXIF.tools