Emerson Fisher Easy E Ed Data Sheet

: Emerson Emerson-Fisher-Easy-E-Ed-Data-Sheet-680731 emerson-fisher-easy-e-ed-data-sheet-680731 emerson pdf

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Fisherr Large ET and ED Valves
NPS 12 through 16 and NPS 30
Fisher NPS 12 through 16 and NPS 30 CL150 through
CL600 ET and ED control valves are used for either
throttling or on-off control of a wide variety of liquids
and gasses.
ET valves with a hanging cage are available for
demanding applications in oil and natural gas up to
232_C (450_ F). The hanging cage, with the seat ring
threaded into the cage, provides the valve with
easy­maintenance trim. The seal between the plug and
cage and the seal between the seat ring and body are
spring­loaded PTFE. The spring­loaded PTFE seal
configuration can provide Class V shutoff per ANSI/FCI
70­2 and IEC 60534­4. The temperature range can be
extended to 316_C (600_F) for non­oxidizing service
and to 260_C (500_ F) for oxidizing service by using
the High Temperature (HTS1) seal.
ED valves utilize a hanging cage and a seat ring that is
bolted into the body. These valves have two graphite
piston rings between the cage and plug. They are used
for high temperature applications between 316_C
(600_F) and 593_C (1100_ F) with a Class IV standard
shutoff. Shutoff can be improved to Class V by using
the Bore seal.
To help reduce aerodynamic noise in gas service,
Whisper Trimt III and WhisperFlot cages are
available. Cavitrolt III cages are available to eliminate
the effects of liquid cavitation damage and DST, Dirty
Service Trim, is available for cavitating liquid with
particulates.

Features


Stable Control at High Pressure Drops– Rugged
cage guiding stabilizes the valve plug at all points in
its travel range. This guiding reduces vibration,
mechanical noise, and the need for hydraulic
snubbers.

www.Fisher.com

W9156-1

Fisher NPS 24 Valve Assembly with Piston Actuator



Economy– Streamlined flow passages provide
greater capacities per initial investment than most
globe valves of the same size. Balanced valve plug
design can allow use of smaller actuators for high
pressure drops.



Cost-Effective Operation– Increased wear
resistance of the standard hardened stainless steel
trim means long-lasting service.



Easy Maintenance– The valve can stay in the
pipeline during removal of trim parts for inspection
or maintenance.

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Specifications
Flow Characteristics

Valve Sizes
J NPS 12, J 14, J 16, and J 30

Standard Cages:J Linear or J equal percentage
Whisper Trim III and WhisperFlo Cages: Linear
Cavitrol III Cages: Linear

End Connection Styles
Flanged: CL150, 300, and 600 raised-face or ring-type
joint flanges per ASME B16.5. NPS 30 valve size has
series A flanges as standard, per ASME B16.47
Buttwelding: All ASME B16.25 schedules through
schedule 120 that are compatible with the ASME
B16.34 valve body rating
For other end connections, contact your Emerson
Process Management sales office for details.

For other characteristics, contact your Emerson
Process Management sales office for details.
Flow Direction
Standard and Cavitrol III Cages: Down
Whisper Trim III and WhisperFlo Cages: Up
Flow Coefficients

Maximum Inlet Pressure(1)

See Fisher Catalog 12

Flanged: Consistent with CL150, 300, and 600
pressure-temperature ratings per ASME B16.34
Buttwelding: Consistent with CL600 per
ASME B16.34

Port Diameters
See table 2

Material Temperature and Pressure Drop
Capabilities(1)

Valve Plug Travel
102 through 505 mm (4 to 19-7/8 inches).

See tables 3, 5, and 6

Contact your Emerson Process Management sales
office for further details if needed

Shutoff Classifications per ANSI/FCI 70-2 and IEC
60534-4
ET and ET-C with Metal Seats
Standard: Class V
Optional (for all trims except 2-Stage Cavitrol Trim):
Class IV
ED with Metal Seats
Standard: Class IV
Optional: Class V

Yoke Boss and Stem Diameters
J 127 mm (5H-inch) diameter yoke boss, with 31.8
mm (1.25 inch) diameter valve stem for all valves
except NPS 30
J 179 mm (7-inch) diameter yoke boss, with
50.8 mm (2 inch) diameter valve stem for NPS 30
valve

Construction Materials

Typical Bonnet Style

Valve Body and Bonnet: J WCC steel, J LCC steel,
J WC9 alloy steel,J C12A alloy steel, J CF8M
stainless steel, J CD3MN duplex stainless steel, or
J CD3MWCuN super-duplex stainless steel. For
other materials, consult your Emerson Process
Management sales office
Trim and Other Parts: See table 3

Standard: Style 1 extension
Optional: Style 3 extension
Dimensions and Approximate Weights
See figure 4 and table 7

1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation for valve should not be exceeded.

Table of Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ET High Temperature (HTS1) Seal . . . . . . . . . . . . . . .
ET-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

1
2
4
5

ED Bore Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Construction Materials . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dimensions and Approximate Weights . . . . . . . . . . 11

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Figure 1. Typical Fisher Large ET Valve
TAPPED BONNET
(OPTIONAL)

BONNET

BONNET GASKET
CAGE GASKET
HANGING
CAGE
DESIGN

SEAT RING
THREADED
TO CAGE

W6088-2

COMPLETE VALVE

SEAT RING
THREADED TO CAGE

SEAT RING SEAL RING

W6089-1A

SEAT RING SEAL DETAIL

3

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

ET High Temperature Seal
(HTS1)

The High Temperature Seal is used in place of the
standard plug seal ring and seat ring seal ring. This seal
employs an identical seal ring as the standard ET, but
with the addition of an anti­extrusion ring, backup
ring, and retaining ring. At temperatures above 232_C
(450_F) the elastomer material the seal ring is
constructed from becomes soft and can be damaged
due to an extrusion process that could occur when the
valve plug is moved inside the cage. The purpose of
the anti­extrusion ring and backup ring is to prevent
the seal ring from being extruded.

The High Temperature Seal (HTS1) is available for the
ET only and is required for applications where the
service temperature exceeds 232_C (450_F). This seal
is available for all sizes and trims of the ET and allows
the valve to be used in temperatures up to 316_C
(600_F). See table 3 for temperature limits and figure
2.

Figure 2. Typical Fisher Large ET Valve with HTS1 Seal (Flow Down)
PLUG
RETAINING RING
CAGE
BACKUP RING
ANTI-EXTRUSION
RING
A

PLUG SEAL RING

B

SEAT
RING

VIEW A

VALVE
BODY
SEAT RING
SEAL RING
ANTI-EXTRUSION
RING
BACKUP RING

X0216-1

RETAINING RING

VIEW B

4

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

ET-C

maximum valve shutoff that can be attained at these
cryogenic temperatures with the cryogenic seal is
Class V.

The ET-C is designed to provide throttling or on­off
control of liquids and gases at cryogenic temperatures
as low as ­198_C (­325_F). These valves are identical to
the standard ET, but with a few differences, which
allow the valve to tolerate the very low temperatures.
These differences include:


Style 3 Extension Bonnet



Bolted­In Seat Ring



Cryogenic Plug Seal

See tables 3 and 5 for temperature limits.

ED Bore Seal
The Bore Seal is available for the ED only and is
required for Class V shutoff applications where the
service temperature exceeds 316_C (600_F). For
service temperatures below 316_C (600_F) the ET
should be used when Class V shutoff is required. See
table 1 for availability and temperature limits and
figure 3.

The style 3 extension bonnet is different from the
standard style 1 in that it is designed to locate the
temperature sensitive packing parts further away from
the valve body, preventing them from being exposed
to temperature extremes. The bolted­in seat ring is
similar to that used with the ED valve and
accommodates the unavoidable material shrinkage
that occurs at cryogenic temperatures, which would
otherwise loosen the ET’s standard threaded­in seat
ring. The cryogenic plug seal is used in place of the
standard ET plug seal ring. At cryogenic temperatures
below ­73_C (­100_F) the elastomer material the
standard seal ring is constructed from becomes brittle,
impacting the ability of the valve to shut off. The

The Bore Seal employs a metal C­shaped seal ring that
is secured to the outside diameter of the valve plug.
When the valve plug comes into contact with the seat
ring, to close the valve, the Bore Seal is compressed
against the cage wall thereby blocking a secondary
leakage path that exists between the plug and cage
wall. When the valve plug is not in contact with the
seat ring (i.e. valve open) the Bore Seal is not engaged
and the piston rings that are also secured to the
outside diameter of the plug assume the role of
blocking this secondary leakage path.

Table 1. Bore Seal Availability and Temperature Limits (ED Only)
VALVE
(PRESSURE
CLASS)

ED
(CL150 to CL600)

VALVE SIZE, NPS

TEMPERATURE LIMIT

TRIM
DESIGNATION(1)

VALVE BODY
MATERIAL

_C

_F

40

WCC/WC9

-29 to 371

-20 to 700

WCC

-29 to 427

-20 to 800

WC9

-29 to 566

-20 to 1050

C12A

-29 to 593

-20 to 1100

C12A

-29 to 621

-20 to 1150

WCC

-29 to 427

-20 to 800

WC9

-29 to 482

-20 to 900

41
12, 14, 16, and 30
42
954

ANSI/FCI/IEC
SHUTOFF CLASS

V

1. See tables 3, 5, and 6 for materials.

5

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

VIEW A

Figure 3. Typical Fisher Large ED with Bore Seal

PISTON
RING

RETAINER

CAGE

SEATING AREA
PLUG

FLOW DOWN

A

BORE SEAL

PISTON
RING

RETAINER

CAGE

SEATING AREA
SEAT RING
BOLTED TO
VALVE BODY

W6022-2

PLUG

FLOW UP

BORE SEAL

Table 2. Port Diameters and Valve Plug Travels
VALVE SIZE,
NPS

VALVE

TRIM (CAGE)
Whisper Trim III Level D

12, 14, and 16

ED and ET

ED
30
ET

Standard; Whisper Trim III
Levels A, B, and C; WhisperFlo
All
Standard; Whisper Trim III
Level D; WhisperFlo
Whisper Trim III Levels A, B, and C

6

PORT DIAMETER
mm

Inches

254

10

279

610
610
660

11

24
24
26

MAXIMUM VALVE PLUG
TRAVEL
mm
Inches
203

8.00

102

4.00

140

5.50

203

8.00

302

11.88

505

19.88

302

11.88

505

19.88

302

11.88

505

19.88

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Table 3. Construction Materials (WCC, WC9, CF8M, LCC, and C12A Valves)
TEMPERATURE

PART

MATERIAL

Valve Body and Bonnet

WCC Steel
WC9 Alloy Steel(2)
CF8M Stainless Steel
LCC Steel
C12A Alloy Steel

Cage, Seat Ring, and Valve Plug

See tables 5 and 6

See table 5 and 6

Valve Stem

S20910

Not a Limiting Factor

WCC Valve
LCC Valve

WC9 Valve
Valve Body-to-Bonnet
Bolting

C12A Valve

CF8M Valve

ED Piston Ring or Lower Graphite Piston Ring
(254 mm [10 inch] port only)

_F

-29 to 427
-29 to 593
-198 to 593
-46 to 343
-29 to 649

-20 to 800(3)
-20 to 1100
-325 to 1000(1)
-50 to 650
-20 to 1200

SA-193-B7 Studs, SA-194-2H Nuts

-29 to 427

-20 to 800

SA-193-B7M Studs(4), SA-194-2HM Nuts(4)

-29 to 427

-20 to 800

SA-193-B7 Studs, SA-194-2H Nuts

-46 to 343

-50 to 650

SA-193-B7M Studs(4), SA-194-2HM Nuts(4)

-29 to 316

-20 to 600

SA-193-B7 Studs, SA-194-2H Nuts

-29 to 427

-20 to 800

SA-193-B16 Studs, SA-194-7 Nuts

-29 to 566

-20 to 1050

N07718 HT Studs
N07718 HT Chrome Coat Nuts

-29 to 427

-20 to 800

N07718 HT Studs
N07718 HT Chrome Coat Nuts

-29 to 621

-20 to 1150

SA479 S20910 Chrome Coat Studs
SA479 S20910 Nuts

-198 to 538

-325 to 1000

SA-193-B8M Class 2 Studs
SA-194-8M Nuts

-198 to 427

-325 to 800

SA479 S20910 Chrome Coat Studs
SA479 S20910 Nuts

-198 to 593

-325 to 1100

N07718

-198 to 593

-325 to 1100

Seat Ring Cap Screws
Bonnet, Seat Ring, and Cage Gaskets

_C

N06600/Graphite
Graphite (Fisher
Designation FMS 17F27)
Graphite (Fisher
Designation FMS 17F39)

Oxidizing

-198 to 427

-325 to 800

Non-Oxidizing

-198 to 593

-325 to 1100
-50 to 800

Oxidizing

-46 to 427

Non-Oxidizing

-46 to 482

-50 to 900

Oxidizing

-46 to 538

-50 to 1000

-46 to 593

-50 to 1100

ED Bore Seal

N07718

-198 to 593

-325 to 1100

ET Seat Ring Seal Ring and Plug Seal Ring

Glass and Moly-Filled PTFE with N10276 spring

-73 to 232

-100 to 450

Not a Limiting Factor

Not a Limiting Factor

Anti-extrusion Ring

PEEK (poly ether ether ketone)
S41000

Backup Ring
ET HTS1 Seal

Non-Oxidizing

S31600

Retaining Ring

18-8

Seat Ring Seal Ring
Plug Seal Ring

PTFE/graphite with R30003 spring

232 to 316

450 to 600

ET Cryogenic Seal Ring
Packing (Temperatures shown are in-body
temperatures with Style 1 extension bonnet.)

Packing Flange, Studs, and Nuts

UHMWPE

-198 to 66

-325 to 150

PTFE V-Ring

-46 to 232

-50 to 450

PTFE Composition

-46 to 232

-50 to 450

Oxidizing

-198 to 354

-325 to 700

Non-Oxidizing

-198 to 538

-325 to 1000

Graphite
Ribbon/Filament
Steel

-29 to 427

-20 to 800

S31600

-198 to 593

-325 to 1100

Packing Follower, Spring (PTFE V-Ring Packing), or
Lantern Ring

S31600

Packing Box Ring

S31600

Not a Limiting Factor
-198 to 593

-325 to 1100

1. May be used up to 1100_F if manufacturing controls carbon content to 0.04% minimum or 0.08% maximum.
2. Flanged valve bodies are limited to 427_C (800_F).
3. Limited to 354_C (700_F) in flanged valve bodies.
4. Compliant to NACE MR0175-2002, NACE MR0175/ISO15156, and NACE MR0103.

7

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Table 4. Construction Materials (CD3MN and CD3MWCuN Valves)
TEMPERATURE

PART

MATERIAL

Valve Body and Bonnet

CD3MN Duplex Stainless Steel
CD3MWCuN Super-Duplex Stainless Steel

Valve Stem

S32760
S32760 Studs and Nuts
SA-193-B7/Zinc HDG Studs,
SA-194-2H/Zinc HDG Nuts

Seat Ring Cap Screws
Bonnet, Seat Ring, and Cage Gaskets

ED Piston Ring or Lower Graphite Piston Ring
(254 mm [10 inch] port only)
ET Seat Ring Seal Ring and Plug Seal Ring
Anti-extrusion Ring

N07718

-50 to 800

Not a Limiting Factor
-46 to 200

-50 to 400

Oxidizing
Non-Oxidizing

Graphite (Fisher
Designation FMS 17F39)

Non-Oxidizing

Oxidizing

Glass and Moly-Filled PTFE with N10276 spring

Not a Limiting Factor
Not a Limiting Factor
Not a Limiting Factor
-73 to 232

-100 to 450

Not a Limiting Factor

Not a Limiting Factor

PEEK (poly ether ether ketone)
S41000
S31600

Retaining Ring

18-8
PTFE/graphite with R30003 spring

232 to 316

450 to 600

PTFE V-Ring

-46 to 232

-50 to 450

PTFE Composition

-46 to 232

-50 to 450

Packing Flange, Studs, and Nuts

8

-46 to 427

Seat Ring Seal Ring
Plug Seal Ring
Packing (Temperatures shown are in-body
temperatures with Style 1 extension bonnet.)

Packing Follower,
Lantern Ring, and Box
Ring

Non-Oxidizing

Graphite (Fisher
Designation FMS 17F27)

Backup Ring
ET HTS1 Seal

-60 to 600
-60 to 600

Not a Limiting Factor
Oxidizing

N06600/Graphite

_F

-51 to 316
-51 to 316

Not a Limiting Factor

SA-193-B7 Studs, SA-194-2H Nuts
Valve Body-to-Bonnet Bolting

_C

Oxidizing

Graphite
Ribbon/Filament

Non-Oxidizing

Not a Limiting Factor

S31600

Not a Limiting Factor

CD3MN Valve

S31803

Not a Limiting Factor

CD3MWCuN Valve

S32760

Not a Limiting Factor

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Table 5. Standard, Whisper Trim III, and Cavitrol III Trim Descriptions
VALVE

TRIM
DESIGNATION
40

BODY
MATERIAL
WCC/WC9
LCC
WCC

41

LCC
WC9
C12A

42

C12A
WCC/WC9

ED

43(1)

LCC
CF8M

VALVE PLUG

SEAT RING

CAGE

CAP SCREWS

CA6NM
(modified
410 SST)

CB7CU-1
H1075

CB7CU-1
H1075

N07718

WC9 Steel
with CoCr-A

WC9 Steel
with CoCr-A

WC9 Nitrided

N07718

WC9 Steel
with CoCr-A

WC9 Steel
with CoCr-A

WC9 Nitrided

N07718

F91 with
CoCr-A

F91 with
CoCr-A

F91 - Nitrided

N07718

CF8M with
CoCr-A on
seat & guide

CF8M with
CoCr-A seat

CF8M Chrome
Plate

N07718

TEMPERATURE LIMIT

_C

_F

-29 to 427

-20 to 800

-46 to 343

-50 to 650

-29 to 427

-20 to 800

-46 to 343

-50 to 650

-29 to 566

-20 to 1050

-29 to 593

-20 to 1100

-29 to 621

-20 to 1150

-29 to 343

-20 to 650

-46 to 343

-50 to 650

-73 to 343

-100 to 650

44(1)

CF8M

CF8M with
CoCr-A on
seat & guide

CF8M with
CoCr-A seat

CF8M
ChromeCoated

N07718

-73 to 538(2)

-100 to
1000(2)

49(4)

CD3MN

S31803 with
R31233 on
seat & guide

S31803 with
CoCr-A seat

S31803
Chrome Plate

N07718

-51 to 316

-60 to 600

50(5)

CD3MWCuN

S32760 with
R31233 on
seat & guide

S32760 with
CoCr-A seat

S32760
Chrome Plate

N07718

-51 to 316

-60 to 600

CB7CU-1
H1075

CB7CU-1
H1075

-29 to 316

-20 to 600

CA6NM HT

---

-46 to 316

-50 to 600

-46 to 316

-50 to 600

-29 to 316

-20 to 600

WCC/WC9
45

LCC
CF8M
WCC/WC9

46

LCC
CF8M

47(3)
ET

WCC/WC9
LCC

CF8M with
CoCr-A on
seat & guide
CF8M with
CoCr-A on
seat & guide
CF8M with
CoCr-A on
seat & guide

CF8M with
CoCr-A seat

CF8M Chrome
Plate

---

CF8M with
CoCr-A seat

CB7CU-1 DBL
H1150

---

CF8M

CF8M
ChromeCoated

-46 to 316

-50 to 600

-73 to 316

-100 to 600

-29 to 93

-20 to 200

-46 to 93

-50 to 200

---

-198 to 66

-325 to 150

48(1)

CF8M

49(4)

CD3MN

S31803 with
R31233 on
seat & guide

S31803 with
CoCr-A seat

S31803
Chrome Plate

---

-51 to 316

-60 to 600

50(5)

CD3MWCuN

S32760 with
R31233 on
seat & guide

S32760 with
CoCr-A seat

S32760
Chrome Plate

---

-51 to 316

-60 to 600

1. NACE MR0175-2002, MR0175, ISO15156, and MR0103 approved trim combinations. Environmental restrictions apply to MR0175/ISO15156.
2. May be used up to 593_C (1100_F) if 316H valve body material is used. Contact your Emerson Process Management sales office for additional information.
3. NACE MR0175-2002 approved trim combination.
4. NACE MR0175/ISO15156 approved trim combinations. Environmental restrictions apply to MR0175/ISO15156.
5. NACE MR0175-2002 and MR0175/ISO15156 approved trim combinations. Environmental restrictions apply to MR0175/ISO15156.

9

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Table 6. WhisperFlo Trim Descriptions
VALVE

TRIM
DESIGNATION
954

BODY
MATERIAL
WCC
WC9
WCC

ED
951(1)
955

ET

953(1)

SEAT RING

CAGE

CA6NM

WC9 with
CoCr-A seat

S41000/
ENC/Ult

N07718

CF8M with
CoCr-A seat

S31600/
ENC/Ult

N07718

WCC/WC9

CA6NM

S17400
H1075

S41000/
ENC/Ult

---

WCC/WC9

CF8M with
CoCr-A on
seat & guide

CF8M with
CoCr-A seat

S31600/
ENC/Ult

---

WC9

CF8M

TEMPERATURE LIMIT

CAP SCREWS

CF8M with
CoCr-A on
seat & guide

CF8M(2)
ET

VALVE PLUG

_C

_F

-29 to 427

-20 to 800

-29 to 482

-20 to 900

-29 to 427

-20 to 800

-29 to 566

-20 to 1050

-29 to 593

-20 to 1100

-29 to 316

-20 to 600

-29 to 316

-20 to 600

-29 to 316

-20 to 600

1. NACE approved trim combinations. Environmental restrictions apply to MR0175/ISO15156.
2. May be used up to 593_C (1100_F) if 316H valve body material is used. Contact your Emerson Process Management sales office for additional information.

10

Product Bulletin

Large ET and ED Valves

51.1:ET/ED (Large)
March 2015

D103554X012

Table 7. Dimensions and Approximate Weights
END
CONNECTION
Size,
NPS

Type(1)

12

RTJ

Kg

Lb

1410

3100

1220

2700

1565

3450

1340

2950

1720

3800

BW

1450

CL300
RF
CL600
RF

RF
BW
RF
14

RTJ
BW
RF

16

30

APPROXIMATE
WEIGHT
(LONG-NECK
VALVE(2)

RTJ

DIMENSION
A
CL150

Standard Style 1 Extension Bonnet

CL300

G

CL600

mm

Inch

mm

Inch

mm

Inch

737

29.00

775

30.50

819

32.25

746

29.38

790

31.12

822

32.38

---

---

---

---

819

32.25

889

35

927

36.5

972

38.25

---

---

---

---

---

---

---

---

---

---

972

38.25

1016

40.00

1057

41.62

1108

43.62

1026

40.38

1073

42.25

1111

43.75

3200

---

---

---

---

1108

43.62

6690

14750

2134

84.00

2134

84.00

---

13600

30000

---

---

---

---

2210

Short-Neck Valve

Long-Neck Valve

D

D

Max. Travel

Max. Travel

mm

Inch

mm

Inch

mm

Inch

mm

Inch

mm

Inch

338

13.31

592

23.32

140

5.5

745

29.32

203

8

379

14.92

561

22.07

140

5.5

713

28.06

203

8

389

15.31

561

22.07

140

5.5

713

28.06

203

8

---

673

26.5

1134

44.64

372

14.63

1401

55.14

504

19.84

87.00

699

27.5

1134

44.64

372

14.63

1401

55.14

504

19.84

1. RF--raised face; RTJ--ring-type joint; BW--buttwelding.

Figure 4. Dimensions and Approximate Weights (also see table 7)
MATCH LINE FOR ACTUATORS

D

G

A
2
A6068

A

11

Product Bulletin
51.1:ET/ED (Large)
March 2015

Large ET and ED Valves
D103554X012

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher, Whisper Trim, WhisperFlo, and Cavitrol are marks owned by one of the companies in the Emerson Process Management business unit of Emerson
Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are
the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com
E
122011, 2015 Fisher Controls International LLC. All rights reserved.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Modify Date                     : 2015:02:18 13:52:57-06:00
Create Date                     : 2015:02:18 13:52:28-06:00
Metadata Date                   : 2015:02:18 13:52:57-06:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:e986497a-913f-42c4-b4bb-df06e82916ba
Instance ID                     : uuid:73c0709a-726a-4090-a17d-3301bc2c2469
Page Count                      : 12

EXIF Metadata provided by EXIF.tools