Emerson Fisher Easy E Ed User Guide
2015-03-30
: Emerson Emerson-Fisher-Easy-E-Ed-User-Guide-680737 emerson-fisher-easy-e-ed-user-guide-680737 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 28
| Download | |
| Open PDF In Browser | View PDF |
Product Flier PF51.1:E D102414X012 July 2008 easy-e Valves Fisherr easy-et Control Valves W7957 S Valves for general, erosive, cavitating, or noisy applications S DN 25 to 300 and NPS 1/2 to 24 sizes S Choice of balanced or unbalanced trim and metal or soft seats S Temperatures to 538_C S Pressures to PN 160 and CL900 S ENVIRO-SEALt packing systems are available to assist in compliance with environmental emissions requirements S FIELDVUEt digital valve controllers offer digital control and remote diagnostics. The traditional proven line of Fisher positioners, controllers, transmitters, and switches also is available. www.Fisher.com Product Flier easy-e Valves PF51.1:E July 2008 The easy-e Valve Family easy-e valves are rugged, single-port globe, angle, and reverse-acting (push-down-to-open) valves designed for many varied applications. Although there are many variations available, internal trim parts are interchangeable for many different trims, and maintenance procedures are similar. These features reduce spare parts inventory and simplify maintenance training. Interchangeable Trim Sizes . . . Many easy-e valves feature interchangeable, restricted-capacity and full-size trims to meet variable flow demands. W0451-3 Figure 1. Typical easy-e Globe Valve Select from Several Flow Characteristics . . . In most types, J quick-opening, J linear, and J equal percentage flow characteristics are available. W0959 W0957 W0958 Quick Opening Cage Noise-Attenuating Trim . . . To help reduce aerodynamic noise in gaseous service, Whisper Trimt cages are available. To minimize liquid cavitation damage, Cavitrolt III cages are available. Equal Percentage Cage W0961 Linear Cage Figure 2. Typical Cages 2 Whisper Trim Cage for Noise Attenuation Product Flier PF51.1:E July 2008 easy-e Valves The easy-e Valve Family (Continued) Materials for Sour Service . . . Materials and manufacturing procedures for compatibility with NACE MR0103, and MR0175/ISO 15156 are available. W2629/IL W6962 Whisper Trim III Cage for Reduction of Noise in Gas, Steam, and Vapor Applications Cavitrol III Trim for Control of Liquid Cavitation (Typical FL Coefficients for Two- or Three-Stage Trim is 0.98) Figure 3. Typical Trims Protection Against Process Fluid Emissions . . . Optional ENVIRO-SEAL packing systems provide an improved stem seal to help prevent the loss of valuable or hazardous process fluids. These live-loaded systems provide long packing life and reliability. W5803-1* PTFE ENVIRO-SEAL Packing System Figure 4. ENVIRO-SEAL Packing 3 Product Flier easy-e Valves PF51.1:E July 2008 Actuators 657 and 667 Pneumatic Diaphragm Actuators . . . Rugged, heavy-duty spring-return actuators. These actuators are available with a variety of instrument accessories, handwheels, and adjustable travel stops. They can be used for on-off or throttling operation with or without a valve positioner. (long stroke) piston actuators feature high thrust and long travels for very large valves. Accessories 3025 Diaphragm Actuators . . . Spring-opposed diaphragm actuators. Suitable for travels up to 200 mm (8 inches). Specified as either direct or reverse acting, actuator action can be easily changed on site without need of additional parts. They can be used for on-off or throttling operation of automatic control valves. FIELDVUE Digital Valve Controller . . . The controller is available mounted on actuators. Piston Actuators . . . J 585C size 25 through 130 actuators for high thrust requirements. J 585CLS Position Transducers, Solenoid Valves, Limit Switches, and Controllers . . . Also available. Positioners and Transducers . . . Pneumatic positioners and electro-pneumatic positioners and transducers can be provided with these valves. W9088 W1916-2 W9131-1 657 or 667 Actuator 3025 Actuator Figure 5. Typical Actuators 4 585C Actuator Product Flier PF51.1:E July 2008 easy-e Valves Selecting easy-e Products Only a few of the more commonly selected product materials, sizes, options, and accessories are covered in this flier. Contact your nearest sales office (refer to the back cover) for assistance in selecting and sizing these products. More detailed specifications are available on request. Selecting Valve Components Valve Trim and Body Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . End Connections and Valve Body Materials . . . . . . . . . . . . . . . . . . Valve Plug, Seat, Ring, and Cage (Trim) Materials . . . . . . . . . . . . . Bonnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other Valve Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8 9 9 10 Selecting an Actuator 657 and 667 Pneumatic Diaphragm Actuators . . . . . . . . . . . . . . . 11 3025 Diaphragm Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Selecting Accessories FIELDVUE Digital Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . 13 Valve Positioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Other Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Reference Information Trim Material Pressure/Temperature Capabilities . . . . . . . . . . . . . 17 Flow Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Conversion of Sizing Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Actuator Size Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Typical Valve and Actuator Weight . . . . . . . . . . . . . . . . . . . . . . . . . 24 Typical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Sales Offices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NO TAG 5 Product Flier easy-e Valves PF51.1:E July 2008 Valve Trim and Body Style Letter Designations Used in this Table Application E: Valve design series T, D, S, and Z: Trim type % Trim Type Fisher Trim Designation Body Style DN 25 - 200 NPS 1 - 8 ETR DN 25 - 100 NPS 1 - 4 EAT DN 25 - 150 NPS 1 - 6 PN 10 - 100 CL150 - 600 Globe with expanded end connections EWT DN 100 x 50(1) (NPS 4 x 2) through NPS 24 x 20 PN 25 - 160 CL300 - 900 Globe with expanded end connections and long travel for noise-attenuating trim EWNT (metal seats only) DN 200 x 150 and DN 300 x 200 NPS 8 x 6 and 12 x 8 PN 25 - 160 CL300 - 900 IV Large globe with long travel EUT NPS 12, 16, 20 CL150 - 600 Soft seat: V Metal seat: IV Globe ED DN 25 - 200 NPS 1 - 8 Reverse acting (push-down-to-open) EDR DN 25 - 100 NPS 1 - 4 Angle EAD DN 25 - 150 NPS 1 - 6 PN 10 - 100 CL150 - 600 Globe with expanded end connections EWD DN 100 x 50 (NPS 4 x 2) through NPS 24 x 20 PN 25 - 160 CL300 - 900 Through 12 x 8: II Larger sizes: III Globe with expanded end connections and long travel for noise-attenuating trim EWND DN 200 x 150 through DN 300 x 200 NPS 8 x 6 through NPS 12 x 8 PN 25 - 160 CL300 - 900 III Large globe with long travel EUD NPS 12, 16, 20 CL150 - 600 III Globe ES DN 25 - 200 NPS 1/2 - 8 PN 10 - 100 CL125 - 600 Angle EAS DN 25 - 150 NPS 1 - 6 PN 10 - 100 CL150 - 600 Globe with expanded end connections EWS DN 100 x 50 through DN 300 x 200 NPS 4 x 2 through NPS 12 x 8 PN 25 - 160 CL300 - 900 Globe EZ DN 25 - 100 NPS 1/2 - 4 PN 10 - 100 CL125 - 600 Reverse acting (push-down-to-open) Angle General applications for process temperatures to 427_C Balanced, cage-guided with elastomer cage-plug seal and soft or metal seats Balanced, cage-guided with graphite cage-plug seal and metal seats T D General applications for process temperatures to 538_C Unbalanced, cage-guided without cage-plug seal and with metal or soft seats S Viscous, non-lubricating, or other hard-to-handle fluids with process temperatures to 427_C Unbalanced cageless, post-guided with metal or soft seals Z 1. End connection size x nominal trim size. 6 A: Angle valve style R: Reverse acting (push down to open) Standard Ratings Shutoff Class ET Globe Stringent shutoff with process temperatures to 204_C U: Large size W. Expanded ends N: Long travel Fisher Valve Valve Size Body PN 10 - 100 CL125 - 600 PN 10 - 100 CL125 - 600 Soft seat: V Metal seat: IV (standard) or V (optional) II Metal Seat: IV Soft Seat: VI Metal Seat: IV Soft Seat: VI Product Flier PF51.1:E July 2008 easy-e Valves Valve Trim and Body Style (Continued) W0972-3 W9509-1 Typical Angle Valve W3318 Typical Reverse-Acting Valve W0451-1 Valve with Long Travel and Expanded End Connections W3421-1 ED Trim W2966B-1 ES Trim W3162-1 EZ Trim ET Trim 7 Product Flier easy-e Valves PF51.1:E July 2008 End Connections and Valve Body Materials END CONNECTIONS VALVE SIZE MATERIALS NOTES 1/2 - 2 WCC steel, CF8M (316 stainless steel), and other steel alloys Not available in angle valves 25 - 200 1-8 Cast iron Not available in NPS 1-1/4 25 - 200 1-8 100 x 50 through 300 x 200 4 x 2(1) through 12 x 8 12 - 24 and 16 x 12 through 24 x 20 EN ASME DN NPS --- NPT internal CL600 body rating --- PN 10, 16, and 25 raised-face flanged PN 16, 25, 40, 63, and 100 raised-face flanged PN 16, 25, 40, 63, 100, and 160 raised-face flanged CL125 flat-face and 250 raised-face flanged CL150, 300, and 600 raised-face or ring-type joint flanged CL300, 600, or 900 raised-face or ring-type joint flanged --- CL150, 300, and 600 raised-face or ring-type joint flanged --- --- Socket weld ends (CL600 body rating) --- 1/2 - 2 --- 1-8 ----- Buttwelding ends --- 4x2 through 12 x 8 12 through 24 and 16 x 12 through 24 x 20 WCC steel, CF8M (316 stainless steel), and other steel alloys WCC steel, CF8M (316 stainless steel), and other steel alloys WCC steel, CF8M (316 stainless steel), and other steel alloys WCC steel, CF8M (316 stainless steel), and other steel alloys WCC steel, CF8M (316 stainless steel), and other steel alloys WCC steel, CF8M (316 stainless steel), and other steel alloys WCC steel, CF8M (316 stainless steel), and other steel alloys Not available in NPS 1-1/4 --- --- Not available in angle valves Not available in NPS 1-1/4 Available in CL600 CL300, 600, or 900 CL600 1. End connection size x nominal trim size. W0668-2 W0667-2 W6733 Plain Bonnet with Single PTFE V-Ring Packing 8 W5800-2 Style 1 Extension Bonnet Style 2 Extension Bonnet ENVIRO-SEAL Bellows Seal Bonnet Product Flier PF51.1:E July 2008 easy-e Valves Valve Plug, Seat Ring, and Cage (Trim) Materials VALVE TYPE ED, ES, EWD, EWS through DN 300 x 200(1) (NPS 12 x 8 sizes) ET, EWT through DN 300 x 200 (NPS 12 x 8) BODY MATERIAL SEAT TYPE MATERIALS Valve Plug Seat Ring Depending on size, S41600 or CA15 (410 stainless steel) both hardened to 38 HRC S31600 Standard for all body materials except CF8M (316 stainless steel) Metal S41600 (416 stainless steel) hardened to 38 HRC CF8M Metal S31600 (316 stainless steel) Standard for all body materials except CF8M (316 stainless steel) Soft S41600 (416 stainless steel) hardened to 38 HRC S31600 CF8M Soft S31600 S31600 Cast iron and steel Metal S41600 hardened CF8M Metal S31600 EZ Cage FISHER TRIM NUMBER(2) S17400 (17-4PH stainless steel) hardened to 40 HRC S31600 with electroless nickel coating (ENC) S17400 (17-4PH stainless steel) hardened to 40 HRC S31600 or CF8M with electroless nickel coating (ENC) S41600 hardened seat ring with CB7Cu-1 (17-4PH stainless steel) seat ring retainer S31600 with CF8M seat ring retainer 1 29 57 29 NOTES Trims with alloy 6 hardfacing also are available. For optional ES, EWS soft seat, use trim 29 or 57 Trims with alloy 6 hardfacing also are available. For optional metal seats, use trim1 or 29 --- 101 Trims with alloy 6 hardfacing also are available. --- 129 --- 1. End connection size x nominal trim size. 2. Refer to the following pages for pressure and temperature limits of the trim. Bonnets Bonnet Style Plain Style 1 extension Style 2 extension ENVIRO-SEAL bellows seal bonnet Valve Type or Size All types and sizes Globe and angle only; not available for EUD, EUT or 16 x 12 or larger EW Globe and angle only; not available for EUD, EUT, EWN, or 16 x 12 or larger EW Available only on globe and angle valves through DN 100 and DN 200 x 100 (NPS 4 and 8 x 4) Packing Material In-Body Process Temperature Range, _C PTFE V-Ring -18 to 232 PTFE/composition -18 to 232 Graphite ribbon/filament 18 to maximum limit shown in other tables PTFE V-ring PTFE/Composition 46 to 18 and above 232 Graphite ribbon/filament PTFE V-ring PTFE/Composition 101 to 18 and above 232 Graphite ribbon/filament For exceptional stem sealing capabilities with PTFE or graphite standard packing or with ENVIRO-SEAL packing system Notes These in-body process temperatures assume an ambient temperature of 21_C. When using any packing at low process temperatures, an extension bonnet might be needed to prevent valve stem frost. Frost can damage the packing. Contact your nearest sales office 9 Product Flier easy-e Valves PF51.1:E July 2008 Other Valve Parts PART Body-to-bonnet bolting VALVE TYPE OR SIZE Use for Body Material: Cap Screws, Stud, or Nut Material --- Cast iron Steel SAE GR 5 cap screws 29 to 232 WCC, C5, and WC9 steel SA-193-B7 steel studs SA-194-2H steel nuts 29 to 427 SA-193-B7 steel studs SA-194-2H steel nuts 48 to 427 SA-193-B8M stainless steel studs (strain hardened) SA-194-8M stainless steel nuts 198 to 427 SA-193B8M stainless steel studs (annealed) SA-194-8M stainless steel nuts The lower limit is 198; other valve parts determine the upper limit All sizes and types except as listed below CF8M Packing (also refer to the bonnet selection table) TEMPERATURE RANGE, _C MATERIALS All types (see notes for exceptions) PTFE V-ring 40 to 232 PTFE/composition 73 to 232 Graphite ribbon/filament in oxidizing service 198 to 371 Graphite ribbon/filament in non-oxidizing service 198 to 538 ENVIRO-SEAL and HIGH-SEAL packing systems with PTFE, duplex, Kalrez, or graphite packing EZ Flat gaskets All sizes and types except EZ NOTES --- Specify lubricated nuts for temperatures greater than 232_C --- --- Temperature limits vary with pressure and fugitive emissions standards; contact your nearest sales office for information S31600 stainless steel / graphite 198 to 593 PTFE-coated N04400 73 to 149 S31600/graphite in oxidizing service 198 to 593 PTFE-coated N04400 73 to 149 Limit to 427_C in oxidizing service --Limit to 427_C in oxidizing service --- Spiral-wound gasket All N06600 nickel alloy 600 / graphite (flexible graphite) standard N04400 nickel alloy Soft seat disc ES, ET, EUT, EWS, EWT, EZ PTFE 73 to 204 --- Graphite in oxidizing service 46 to 427 --- Graphite in non-oxidizing service 46 to 482 --- 18 to 204 Do not use fluorocarbon with ammonia, steam, or hot water Carbon-filled PTFE seal ring with ethylene-propylene backup ring 40 to 232 Do not use ethylene-propylene with petroleum-based fluids or other hydrocarbons Spring-loaded PTFE seal ring with N07750 spring and stainless steel backup ring and retaining ring 73 to 232 --- Piston ring for ED type trim ED and EWD Carbon-filled PTFE seal ring with fluorocarbon backup ring Seal ring for ET type trim 10 ET, EWT (up to DN 300 x 200 or NPS 12 x 8 sizes) 198 to 593 --- 73 to 232 Product Flier PF51.1:E July 2008 easy-e Valves 657 and 667 Pneumatic Diaphragm Actuators These heavy-duty actuators feature spring-return action and a variety of operation options and actuator-mounted accessories. The actuator can be used for on-off or throttling service, with or without a positioner. With a push-down-to-close valve, the 657 is air to close, and the 667 is air to open. Options . . . J Adjustable travel stop, J top-mounted handwheel, and J side-mounted manual actuator. Specifications . . . Refer to the following table and the actuator-valve selection tables. Accessories . . . Refer to the following pages for J pneumatic and electro-pneumatic valve positioners, J FIELDVUE digital valve controllers, and other accessories W0363-1 Figure 6. 657 and 667 Actuator 657 and 667 Actuator Specifications ACTUATOR SIZE NOMINAL OPERATING PRESSURE RANGES Bar Psig 30 MAXIMUM CASING PRESSURE, BAR 657 9.6 667 MAXIMUM ALLOWABLE THRUST, N AMBIENT TEMPERATURES, _C Diaphragm: Nitrile (standard) or Silicone (Optional) Yoke: Cast iron 7.6 10 231 34 5.2 6.2 40 5.2 6.2 12 010 45 4.1 5.2 25 132 46 3.4 4.5 33 584 4.1 5.2 25 131 60 3.4 4.5 30 246 70 4.5 4.1 39 142 80 4.1 4.1 63 392 100 7.9 7.9 200 160 50 0.2 to 1.0 or 0.4 to 2.0 3 to 15 or 6 to 30 MATERIALS Nitrile: 40 to 82 Silicone: 50 to 149 Diaphragm Plate: Aluminum, cast iron, or steel (depending on size) Other Major Metal Parts: steel or cast iron with brass seal bushing APPROXIMATE WEIGHT, kg 657 667 16 15 22 22 23 23 37 41 49 55 42 43 53 55 107 115 234 284 346 544 11 Product Flier easy-e Valves PF51.1:E July 2008 3025 Diaphragm Actuators These heavy-duty spring-opposed actuators can be specified as either direct (air-to-close) or reverse (air-to-open). Actuator action can be easily changed on site without need of additional parts. The actuator can be used for on-off or throttling operation of automatic control valves. Options . . . J Side-mounted gear handwheel, J Oversize signal connections. Specifications . . . Refer to the following table. Accessories . . . Refer to the following table. 3025 Actuator Specifications Features Long travel, up to 200 mm (8 inches) Style AIR TO CLOSE AIR TO OPEN Spring-opposed pneumatic diaphragm Typical Maximum Thrust, Newtons (Varies with Operating Pressure, Spring, and Construction) Air to Close, Size P900: 76 310 Air to Open, Size P900: 61 150 Accessories FIELDVUE digital valve controllers, handwheels, transducers, position transmitters, air relays, volume boosters, switching valves, lockable valves, limit switches, and solenoid valves are available for actuator mounting. 12 Figure 7. 3025 Actuator Product Flier PF51.1:E July 2008 FIELDVUE Digital Valve Controller FIELDVUE digital valve controllers are communicating, microprocessor-based controllers that convert a current signal to a pressure signal to operate the actuator. Through digital communications, the controller gives easy access to actuator-valve information that is critical to operation. easy-e Valves Approvals Available Not all approvals are available on all FIELDVUE products. Contact your sales office for specific approvals. Explosion proof, Division 2, Dust-Ignition proof, Intrinsic Safety, Non-incentive APPROVED Explosion proof, Non-incendive, Dust-Ignition proof, Intrinsic Safety ATEX Flameproof, Type n, Intrinsic Safety IECEx Flameproof, Type n, Intrinsic Safety Refer to following tables for FIELDVUE controller specifications. Flameproof, Intrinsic Safety Flameproof, Intrinsic Safety AMS ValveLinkt Software . . . AMS ValveLink Software allows easy access to the information available from FIELDVUE digital valve controllers. The software provides diagnostic information such as dynamic error band and step response on easy-to-interpret screens. Tests can be run while the valve is operating, without disrupting the process. Access to diagnostics is through the 375 Field Communicator or a personal computer using AMS ValveLink Software. DVC2000 Electrical Housing: Designed to meet IP66 (FM--approval pending for other agencies) NEMA 4X (approval pending). Contact your sales office for information on pending approvals. DVC6000 and DVC6000f Electrical Housing: Meets NEMA 4X, CSA Type 4X, IEC 60529 IP66 Natural Gas Approved: DVC6000 and DVC6000f are single-seal approved for use with natural gas. Contact your sales office for specific agency approval information. W8755 Figure 8. FIELDVUE DVC2000 Digital Valve Controller Options (contact your sales office for details on product specific options) . . . J HARTr, J FOUNDATIONt fieldbus, J remote mounting, J stainless steel housing, J Safety Instrumented System (SIS) applications, J Natural gas applications, J Performance Diagnostics, J extreme temperatures, and J low bleed relay. W7957 Figure 9. FIELDVUE DVC6000 Digital Valve Controller on a 657 or 667 Actuator 13 Product Flier easy-e Valves PF51.1:E July 2008 FIELDVUE Digital Valve Controller (Continued) Digital Valve Controller Electrical Specifications (HART instruments only) ELECTRICAL INPUT Multi-Drop Connection (DVC6000 Only) Point-to-Point Connection Analog Input Signal Minimum Control Current Minimum Current without Microprocessor Restart Maximum Voltage Overcurrent Protection Instrument Power 4 to 20 mA DC nominal 4.0 mA 3.5 mA 30 VDC Input circuit limits current to prevent internal damage 11 to 30 VDC at approximately 8 mA REVERSE POLARITY PROTECTION No damage occurs from reversal of loop current Digital Valve Controller Electrical Specifications (FOUNDATION fieldbus Communication only) POWER REQUIREMENTS COMMUNICATION PROTOCOL FOUNDATION fieldbus registered device Physical Layer Type(s): 121—Low-power signaling, bus-powered, Entity Model I.S. 511—Low-power signaling, bus-powered, FISCO I.S. 14 Voltage Level Maximum Current Reverse Polarity Protection Termination 9 to 32 volts 18 mA Device is not polarity sensitive Bus must be properly terminated per ISA SP50 guidelines Product Flier PF51.1:E July 2008 easy-e Valves Valve Positioners 3582 and 3582i Valve Positioners (for 657 and 667 Actuators) The 3582 pneumatic and 3582i electro-pneumatic valve positioners are accurate, efficient positioners for use with 657 and 667 actuators. The field-proven design is fast to respond to input signal changes and is able to withstand the vibrations of most plants. Options . . . J Gauges and J bypass valve for direct-acting positioners using full input signal range. Approvals Available W5500 Electrical Classification (Applies to the 3582i) Figure 10. 3582 and 3582i Valve Positioners Intrinsic Safety, Explosion proof, Type n Dust-Ignition proof, DIV 2, APPROVED Hazardous Area Classifications (Applies to the 3582) Intrinsic Safety, Explosion proof, Type n, Non-incendive, Dust-Ignition proof, 3582 Series valve positioners comply with the requirements of ATEX Group II Category 2 Gas and Dust Intrinsic Safety, Type n, Explosion proof ATEX (Gas Atmospheres Only) SAA Intrinsic Safety, Flameproof, Type n 3582 and 3582i Positioner Specifications Input Signal Supply Pressure Input Bellows Rating Operative Temperature Weight Connections 40 to 71_C 2.5 kg Pressure and Vent Connections: 1/4 NPT internal 40 to 71_C 3.6 kg Pressure and Vent Connections: 1/4 NPT internal Conduit: 1/2 NPT internal 3582 0.2 to 1.0 or 0.4 to 2.0 bar 3 to 15 or 6 to 30 psig 0.3 bar above the actuator requirement up to 3.4 bar maximum (do not exceed actuator pressure rating) 2.4 bar 3582i 4 to 20 mA constant current with 30 VDC maximum compliance voltage; equivalent circuit is 120 ohms shunted by three 5.6 V zener diodes 0.3 bar above the actuator requirement up to 3.4 bar maximum (do not exceed actuator pressure rating) --- 3582 and 3582i Capacities and Housing AIR CONSUMPTION, Nm3/h SUPPLY PRESSURE, BAR SUPPLY AIR DEMAND, Nm3/h 3582 3582i 1.4 4.7 0.38 0.42 2.0 7.0 0.48 0.53 2.4 8.1 0.54 0.59 HOUSING CSA Type 3 Encl., NEMA 3, IP54 per IEC 60529; Mount instrument with vent on the side or the bottom if weatherproofing is a concern. 15 Product Flier easy-e Valves PF51.1:E July 2008 Other Accessories 67CFR Filter-Regulator . . . The 67CFR provides constantly controlled supply pressure to actuator accessories system. This regulator features an internal filter and limited-capacity internal relief, allowing partial reduction of downstream pressure. Also featured is an integral check valve option that allows the actuated valve to fail to a desired safe position when inlet pressure is lost. 67CFR Filter-Regulator Specifications OUTLET PRESSURE SETTINGS Bar Psig 0 to 1.4 0 to 2.4 0 to 4.1 0 to 8.6 0 to 20 0 to 35 0 to 60 0 to 125 MAXIMUM INLET PRESSURE (BODY RATING) BAR 17.2 MAXIMUM DIAPHRAGM PRESSURE, BAR TEMPERATURE CAPABILITIES CONNECTIONS MAXIMUM FLOW COEFFICIENT, CV WEIGHT, kg 3.4 over outlet setting Nitrile diaphragm and plug: 29 to 82_C fluorocarbon diaphragm, plug and PVDF, SST, or Glass Filter: 18 to 149_C Inlet and Outlet: 1/4 NPT internal Vent: Drilled hole or 1/4 NPT internal 0.36 0.5 546, 646, 846, or i2P-100 ElectroPneumatic Transducers . . . These transducers convert a standard 4 to 20 mA DC signal to a proportional pneumatic signal. The 846 and i2P-100 transducers incorporate an explosive fluid process seal to meet safety regulations for use with natural gas as the pneumatic supply. Approvals Available Not all approvals are available on all accessories. Contact your sales office for specific approvals. Explosion proof, Division 2, Dust-Ignition proof, Intrinsic Safety APPROVED Explosion proof, Intrinsic Safety, Non-incendive, Dust-Ignition proof 2625 Volume Booster . . . The volume booster can be used in conjunction with a positioner to increase actuator stroking speed. C1 Pneumatic Controller . . . The controller can sense pressure, differential pressure or vacuum and send pneumatic control signal to an adjacent valve or other control element. Others . . . J High-pressure supply pressure regulators, J proximity switches, J microswitches, J solenoid valves, J signal volume boosters and J pneumatic pressure transmitters. ATEX Intrinsic Safety, Flameproof, and Type n IECEx Intrinsic Safety, Flameproof, and Type n GOST Intrinsic Safety, Flameproof, and Type n 16 Contact your nearest sales office for more information. Product Flier PF51.1:E July 2008 easy-e Valves Trim Material Pressure/Temperature Capabilities for Valve Sizes through DN 300 x 200 (NPS 12 x 8) for ED, ES, and ET Trim 17 Product Flier easy-e Valves PF51.1:E July 2008 Trim Material Pressure/Temperature Capabilities for EZ Trim EZ Trim Temperature Capabilities BODY MATERIAL Cast iron DN NPS TEMPERATURE, _C 101 All All 29 to 232 129 101 WCC Steel 129 101 CF8M (316 stainless steel) 129 18 VALVE SIZE FISHER TRIM NUMBER All All 73 to 232 All All 29 to 427 to 50 80 100 to 40 50 80 100 to 2 3 4 to 1-1/2 2 3 4 29 to 260 29 to 371 29 to 338 29 to 354 29 to 288 29 to 216 12 to 177 to 40 80 100 to 2 3 4 198 to 260 198 to 377 198 to 371 NOTES --With non-lubricating fluids, limit to 149_C --With non-lubricating fluids, limit to 149_C --- With non-lubricating fluids, limit to 149_C Product Flier PF51.1:E July 2008 easy-e Valves ED, ES, and ET Flow Coefficients FLOW CHARACTERISTIC Quick Opening VALVE SIZE MAXIMUM TRAVEL PORT DIA. ED AND ET (FLOW DOWN) ES (FLOW UP) Valve Opening, Percent of Total Travel 10 30 70 100 70 100 100 6.22 11.8 15.0 22.3 48.6 6.52 14.2 21.1 38.0 67.2 6.53 14.2 21.4 38.0 67.2 .88 .83 .89 .94 .93 21.8 23.3 39.0 89.9 156 66.6 78.3 132 255 490 93.1 136 225 418 796 93.1 150 235 469 875 .91 .87 .89 .82 .85 ----------- .681 .576 .540 .577 .633 .653 .605 .656 .639 .619 .624 .534 .663 .743 .797 .622 .534 .650 .789 .810 ----------- .652 .577 .694 .710 .827 ----------- .659 .585 .642 .572 .520 .720 .602 .714 .601 .654 .848 .737 .769 .681 .818 .868 .720 .780 .700 .774 ----------- 16.9 30.3 62.0 83.6 20.6 39.2 72.9 108 .84 .82 .77 .81 2.27 3.56 8.49 10.4 6.23 11.1 25.9 34.9 15.8 26.7 59.2 73.7 20.1 34.9 65.3 86.5 .89 .92 .91 .93 118 181 367 711 148 236 433 846 15.3 23.7 55.0 100 52.8 72.9 180 330 112 165 341 719 135 212 417 836 .89 .89 .81 .85 .494 .758 .728 .644 .610 .708 .683 .716 .636 .656 .638 .641 --------- .691 .628 .618 .672 .690 .604 .689 .739 .709 .715 .742 .858 .690 .764 .762 .866 --------- .671 .691 .656 .651 .697 .720 .744 .677 .707 .748 .784 .823 .620 .688 .740 .807 --------- .607 .553 .597 .616 .663 .644 .701 .669 .762 .743 .787 .762 .751 .791 .745 .799 --------- 33.3 47.6 58.7 73.0 .783 1.52 1.66 3.43 2.20 3.87 4.66 10.8 7.83 17.4 25.4 49.2 17.2 35.8 59.7 99.4 .88 .84 .85 .84 .783 1.54 1.74 4.05 1.86 3.57 4.72 10.6 9.54 17.2 25.0 45.5 17.4 33.4 56.2 82.7 .95 .94 .92 .93 38 51 51 76 87.3 111.1 177.8 203.2 4.32 5.85 12.9 27.0 10.9 18.3 43.3 105 66.0 125 239 605 136 224 394 818 .82 .82 .85 .86 4.05 6.56 13.2 25.9 10.0 17.3 41.1 97.8 59.0 103 223 618 121 203 357 808 .89 .91 .86 .85 1, 1-1/4 1-1/2 2 2-1/2 19 19 29 38 33.3 47.6 58.7 73.0 .766 .780 .827 .778 .587 .716 .774 .678 .743 .690 .702 .661 .667 .679 .687 .660 --------- .754 .674 .863 .747 .763 .694 .849 .745 .630 .698 .792 .783 .721 .793 .848 .878 --------- 3 4 6 8 38 51 51 76 87.3 111.1 177.8 203.2 .774 .731 .688 .644 .682 .643 .682 .636 .663 .672 .736 .725 .675 .716 .778 .807 --------- .768 .722 .723 .825 .761 .739 .767 .681 .754 .718 .808 .735 .757 .822 .816 .827 --------- CV mm mm ----25 40 50 1/2 3/4 1, 1-1/4 1-1/2 2 19 19 19 19 29 33.3 33.3 33.3 47.6 58.7 ----4.86 7.79 13.4 ----13.4 20.5 39.9 ----21.1 39.4 73.7 ----22.1 44.0 77.6 ----.81 .79 .77 4.00 4.94 5.24 7.60 14.3 65 80 100 150 200 2-1/2 3 4 6 8 38 38 51 51 76 73.0 87.3 111.1 177.8 203.2 20.9 27.2 37.7 73.6 135 58.8 77.9 125 232 434 103 149 238 416 759 109 161 251 460 863 .81 .77 .79 .82 .85 ----25 40 50 1/2 3/4 1, 1-1/4 1-1/2 2 19 19 19 19 29 33.3 33.3 33.3 47.6 58.7 ----.556 .494 .605 ----.724 .682 .737 ----.566 .649 .641 ----.556 .597 .623 65 80 100 150 200 2-1/2 3 4 6 8 38 38 51 51 76 73.0 87.3 111.1 177.8 203.2 .601 .626 .623 .664 .643 .738 .745 .733 .667 .757 .669 .619 .689 .728 .857 25 40 50 65 1, 1-1/4 1-1/2 2 2-1/2 19 19 29 38 33.3 47.6 58.7 70.3 3.21 4.23 7.87 9.34 8.18 11.8 24.9 35.5 80 100 150 200 3 4 6 8 38 51 51 76 87.3 111.1 177.8 203.2 14.5 23.3 46.3 91.4 52.1 78.1 171 325 25 40 50 65 1, 1-1/4 1-1/2 2 2-1/2 19 19 29 38 33.3 47.6 58.7 70.3 .340 .656 .641 .680 80 100 150 200 3 4 6 8 38 51 51 76 87.3 111.1 177.8 203.2 25 40 50 65 1, 1-1/4 1-1/2 2 2-1/2 19 19 29 38 80 100 150 200 3 4 6 8 25 40 50 65 80 100 150 200 30 FL XT CV FL XT --- CV FL XT --- FL XT FL XT --- CV Equal Percentage 10 NPS CV Linear 100 DN --- CV FL XT --- --- 19 Product Flier easy-e Valves PF51.1:E July 2008 EZ Flow Coefficients (Flow Up) QUICK OPENING VALVE SIZE MAXIMUM TRAVEL PORT DIA. --- 10 30 70 100 --- FL --- 4.44 9.72 16.9 34.2 .83 .88 .94 .96 --------- ----2.21 3.99 58.4 126 219 58.6 129 223 .94 .91 .88 ------- --- --- .764 .654 .523 .726 .894 .769 .500 .861 .894 .769 .494 .848 --------- --------- .765 .713 .724 .831 .783 .809 .834 .774 .835 ------- --.560 .655 .779 .924 ----.622 .692 .758 .888 ----.554 .684 .677 .866 --DN 25 (NPS 1) VALVE WITH MICRO-FORM AND MICRO-FLUTE VALVE PLUG 19 mm TRAVEL EQUAL PERCENTAGE CHARACTERISTIC DN NPS mm mm ----25 40 1/2 3/4 1 1-1/2 19 19 19 19 33.3 33.3 33.3 47.6 1.76 3.85 4.39 5.64 4.29 9.40 14.0 20.6 4.44 9.72 16.8 33.4 50 80 100 2 3 4 29 38 51 58.7 87.3 111.1 13.0 30.8 50.8 44.3 92.4 159 ----25 40 1-2 3/4 1 1-1/2 19 19 19 19 33.3 33.3 33.3 47.6 .364 .314 .400 .623 50 80 100 2 3 4 29 38 51 58.7 87.3 111.1 .548 .672 .733 100 CV XT EQUAL PERCENTAGE CV DN 25 DN 40 DN 50 DN 80 DN 100 1 1-1/2 2 3 4 19 19 29 38 51 33.3 47.6 58.7 87.3 111.1 .79 .80 1.65 3.11 4.90 1.80 1.91 4.30 9.12 13.5 FL 7.59 9.84 32.8 60.4 96.7 13.2 28.1 53.8 114 190 XT DN 25 DN 40 DN 50 DN 80 DN 100 1 1-1/2 2 3 4 19 19 29 38 51 33.3 47.6 58.7 84.3 111.1 .641 .726 .655 .619 .594 .598 .733 .520 .598 .560 .96 .97 .95 .92 .90 10 30 70 100 100 ----5.29 11.1 ----11.1 25.8 ----13.6 31.9 ----.96 .96 6.08 15.4 21.3 18.0 43.4 57.5 42.8 93.8 157 52.4 110 209 .95 .92 .89 ----.638 .633 ----.638 .657 ----.636 .696 ----.834 .818 --------- CV .646 .597 .653 .586 .532 .886 .840 .899 .781 .834 ----------- Conversion of Sizing Coefficients Following are conversions for use with other common sizing equations. Kv = (0.865)Cv C1= 39.76(pXT) Cg = CvC1 Km = FL2 Cs = 1/20(Cg). Cs is only applicable for inlet pressures up to 70 bar(a) FL XT PORT DIA. 6.4(1) 9.5(1) 12.7(1) 19.1(1) 6.4(2) 6.4(3) .075 .099 .133 .276 .0385 .0562 .175 .308 .492 .965 .0560 .101 6.4(1) 9.5(1) 12.7(1) 19.1(1) 6.4(2) 6.4(3) .804 .795 .787 .723 .778 .692 .658 .641 .628 .588 .690 .639 --- CV FL .641 1.29 2.12 4.57 .162 .433 1.52 3.07 4.91 8.84 .354 1.07 .88 .89 .93 .97 .87 .90 .596 .560 .600 .603 .637 .597 .647 .662 .803 .919 .656 .624 ------------- XT --- 1. Micro-Form valve plug. 2. Micro-Flute valve plug—1 flute. 3. Micro-Flute valve plug—3 flutes. 20 LINEAR Valve Opening, Percent of Total Travel --- Product Flier PF51.1:E July 2008 easy-e Valves EWD, EWS, and EWT Flow Coefficients FLOW CHARACTERISTIC Quick Opening VALVE SIZE MAXIPORT MUM DIA. TRAVEL EWD AND EWT (FLOW DOWN) Valve Opening, Percent of Total Travel 10 30 70 100 70 100 100 42.1 147 149 249 101 355 365 606 123 382 450 714 .89 .88 .85 .86 86.1 151 157 221 261 471 480 1190 641 918 957 2100 874 1000 1110 2210 .79 .93 .89 .87 --------- .639 .619 .578 .682 .652 .591 .560 .634 .843 .726 .733 .688 .793 .781 .704 .671 --------- .782 .787 .636 .614 --------- .614 .632 .718 .689 .571 .625 .712 .682 .677 .798 .855 .644 .736 .842 .836 .638 --------- 70.8 201 211 405 107 320 340 617 .79 .86 .82 .88 6.88 26.2 25.1 52.5 21.5 78.4 78.1 182 60.0 197 192 435 96.2 320 328 607 .89 .89 .89 .88 458 798 907 1680 729 975 1160 2020 .81 .91 .80 .82 57.4 106 119 343 186 315 336 865 441 766 795 1680 675 958 1050 2080 .84 .92 .89 .87 .691 .651 .691 .758 .582 .672 .676 .801 .654 .725 .753 .656 --------- .599 .713 .610 .655 .728 .661 .682 .688 .744 .666 .716 .723 .794 .725 .729 .679 --------- .716 .683 .700 .676 .691 .610 .647 .670 .661 .715 .711 .702 .633 .843 .696 .671 --------- .523 .666 .678 .786 .612 .708 .811 .627 .704 .731 .809 .670 .719 .820 .836 .660 --------- 58.7 111.1 111.1 177.8 2.53 7.34 8.01 13.2 6.66 19.8 21.1 45.4 29.4 108 118 256 82.2 271 286 508 .82 .87 .85 .91 2.40 7.18 8.37 12.0 5.97 18.2 20.0 36.9 26.3 100 102 226 67.5 271 269 478 .90 .88 .90 .92 51 76 76 152 177.8 203.2 203.2 257.2 23.6 32.3 28.4 126 52.8 111 112 238 248 635 687 959 565 924 1090 2090 .79 .89 .81 .77 18.6 33.9 28.8 63.2 43.8 97.7 102 189 231 568 654 837 476 932 1020 1780 .88 .90 .88 .83 4x2 6x4 8x4 8x6 29 51 51 51 58.7 111.1 111.1 177.8 .626 .996 .684 .837 .664 .711 .643 .719 .646 .630 .566 .626 .587 .712 .675 .684 --------- .751 .794 .761 .733 .781 .775 .716 .874 .732 .718 .701 .773 .777 .694 .704 .727 --------- 4x2 6x4 8x4 8x6 51 76 76 152 177.8 203.2 203.2 257.2 .628 .725 .666 .655 .694 .687 .667 .640 .695 .595 .664 .503 .627 .802 .663 .546 --------- .661 .836 .769 .565 .824 .894 .928 .501 .764 .699 .651 .497 .788 .760 .766 .652 --------- CV 10 NPS mm mm 100 x 50 150 x 100 200 x 100 200 x 150 4x2 6x4 8x4 8x6 29 51 51 51 58.7 111.1 111.1 177.8 13.8 40.8 43.2 79.0 42.7 140 147 247 105 306 328 531 124 340 379 637 .82 .88 .89 .89 13.7 39.4 42.1 79.3 300 x 150 250 x 200 300 x 200 400 x 250 12 x 6 10 x 8 12 x 8 16 x 10 51 76 76 152 177.8 203.2 203.2 257.2 80.1 138 149 234 250 468 481 1220 621 903 1000 2080 817 1040 1260 2230 .82 .88 .79 .79 100 x 50 150 x 100 200 x 100 200 x 150 4x2 6x4 8x4 8x6 29 51 51 51 58.7 111.1 111.1 177.8 .571 .577 .629 .544 .662 .612 .631 .578 .714 .793 .809 .759 .693 .818 .817 .705 300 x 150 250 x 200 300 x 200 400 x 250 12 x 6 10 x 8 12 x 8 16 x 10 51 76 76 152 177.8 203.2 203.2 257.2 .515 .665 .687 .872 .613 .651 .727 .682 .715 .741 .744 .652 100 x 50 150 x 100 200 x 100 200 x 150 4x2 6x4 8x4 8x6 29 51 51 51 58.7 111.1 111.1 177.8 6.80 21.4 23.2 44.0 23.0 78.7 80.6 170 300 x 150 250 x 200 300 x 200 400 x 250 12 x 6 10 x 8 12 x 8 16 x 10 51 76 76 152 177.8 203.2 203.2 257.2 51.7 95.9 104 307 176 336 348 834 100 x 50 150 x 100 200 x 100 200 x 150 4x2 6x4 8x4 8x6 29 51 51 51 58.7 111.1 111.1 177.8 .625 .686 .694 .796 300 x 150 250 x 200 300 x 200 400 x 250 12 x 6 10 x 8 12 x 8 16 x 10 51 76 76 152 177.8 203.2 203.2 257.2 100 x 50 150 x 100 200 x 100 200 x 150 4x2 6x4 8x4 8x6 29 51 51 51 300 x 150 250 x 200 300 x 200 400 x 250 12 x 6 10 x 8 12 x 8 16 x 10 100 x 50 150 x 100 200 x 100 200 x 150 100 x 50 150 x 100 200 x 100 200 x 150 30 FL XT CV FL XT --- CV FL XT --- FL XT FL XT --- CV Equal Percentage 100 DN CV Linear EWS (FLOW UP) --- CV FL XT --- --- 21 Product Flier easy-e Valves PF51.1:E July 2008 Actuator Selection for Plain Bonnets and Standard Spring-Loaded PTFE Packing D The selections are valid to 232_C only (204_C for soft-seat constructions). For higher temperatures, your sales office can provide actuator selections for graphite ribbon/filament packing or extension bonnets. The following tables allow you to select an actuator that will operate the valve at standard actuator pressures. It is not implied that the selections shown are best for your application. In many cases, a smaller actuator might be satisfactory for lower pressure drops, and higher pressure drops might be possible by using higher actuator pressures. Your sales office can help you with more detailed actuator selection. D Actuator force does not exceed maximum allowable stem load of standard 316 stainless steel stem material at 232_C. D The actuator selections have been made at maximum valve travel using plain bonnets and standard valve stem diameter. D Do not exceed the maximum inlet pressure of the valve (valve body rating) nor the pressure drop limits on pages 17 and 18. 657 and 667 Actuators ED and EWD Valve: Metal Seat with Class II Shutoff and Flow Down Maximum Inlet Pressure: Through EN PN 100 and ASME CL600 Maximum Shutoff Pressure Drop: As shown below unless limited by body pressure-temperature rating or trim capabilities at high temperatures Process Fluid Temperature: With plain bonnet, 18 to 232_C for metal seats Ambient Temperature: 40 to 82_C with standard actuator materials; also refer to temperature limits of accessories Valve Size or Nominal Trim Size Port Diameter, mm Air to Close (657 Actuator) 0 to 1.2 Bar (0 to 18 psig) Air to Diaphragm Except Where Indicated Air to Open (667 Actuator) 0 to 1.2 bar (0 to 18 psig) Air to Diaphragm Except Where Indicated Actuator Size Pressure Drop, Bar Actuator Size Pressure Drop, Bar 33.3 30 99.3 30 99.3 1-1/2 33.3 47.6 30 34 99.3 99.3 30 34 99.3 99.3 50 2 33.3 58.7 40 40 99.3 91.0 40 40 99.3 91.1 65 2-1/2 47.6 73.0 40 45 99.3 99.3 40 45 99.3 99.3 80 3 58.7 87.3 45 45 99.3 98.9 45 45 99.3 98.9 100 4 73.0 111.1 45 45 99.3 83.8 45 45 99.3 41.2 150 6 111.1 177.8 50 70 80.5 99.3 70 70 99.3 99.3 200 8 203.2 - - -(1) 99.3(1) - - -(1) 99.3(1) DN NPS 25 1 or 1-1/4 40 1. Use a size 70 actuator with 0 to 2.4 bar air to diaphragm. 22 Valve and Bonnet: Cast iron, steel, or stainless steel Trim: Any listed in this flier Gaskets: Any listed in this flier Packing: Single PTFE V-ring Other Valve Parts: Steel or stainless steel Product Flier PF51.1:E July 2008 easy-e Valves 657 and 667 Actuators (Continued) ET and EWT Valve: Flow Down Maximum Inlet Pressure: Through EN PN 100 and ASME CL600 Maximum Shutoff Pressure Drop: As shown below unless limited by body Valve and Bonnet: Cast iron, steel, or stainless steel Trim: Any listed in this flier pressure-temperature rating or trim capabilities at high temperatures Gaskets: Any listed in this flier Process Fluid Temperature: With plain bonnet, 18 to 204_C for soft seats and Packing: Single PTFE V-ring to 232_C for metal seats Other Valve Parts: Steel or stainless steel Ambient Temperature: 40 to 82_C with standard actuator materials; also refer to temperature limits of accessories. Air to Close (657 ACtuator) Air to Open (667 Actuator) 0 to 1.2 Bar (0 to 18 psig) 0 to 1.2 Bar (0 to 18 psig) Valve Size or Air to Diaphragm Except Where Indicated Air to Diaphragm Except Where Indicated Port Nominal Trim Size Metal Seat Soft Seat Soft Seat Diameter, Class IV Shutoff Class IV Shutoff Class V Shutoff Class V Shutoff mm Actuator Pressure Actuator Pressure Actuator Pressure Actuator Pressure DN NPS Size Drop, Bar Size Drop, Bar Size Drop, Bar Size Drop, Bar 25 1 or 1-1/4 33.3 34 99.3 34 99.3 34 99.3 34 99.3 40 1-1/2 33.3 47.6 34 34 99.3 99.3 34 34 99.3 95.0 34 34 99.3 99.3 34 34 99.3 94.9 50 2 33.3 58.7 40 45 99.3 99.3 40 45 99.3 99.3 40 45 99.3 99.3 40 45 99.3 99.3 65 2-1/2 47.6 73.0 40 45 99.3 86.9 40 45 92.2 78.7 40 45 99.3 86.9 40 45 92.2 99.3 80 3 58.7 87.3 45 45 99.3 61.7 45 45 99.3 59.8 45 45 99.3 61.7 45 45 99.3 59.8 100 4 73.0 111.1 45 45 86.9 46.7 45 45 78.7 48.6 45 99.3 60.9(2) 45 - - -(2) 99.3 59.2(2) 150 6 177.8 60 - - -(1) 99.3 49.8(1) 60 70 92.5 65.0 70 - - -(1) 99.3 99.3(1) 70 70 99.3 65.0 200 8 203.2 - - -(1) 9.2(1) - - -(1) 81.8(1) - - -(1) 79.8(1) - - -(1) 99.3(1) 1. Use a size 70 actuator with 0 to 2.4 bar (0 to 33 psig) air to diaphragm. 2. Use a size 45 actuator with 0 to 2.4 bar (0 to 33 psig) air to diaphragm. EZ Valve: Metal Seat (Class IV Shutoff) or PTFE Seat (Class VI Shutoff, and Flow Up) Maximum Inlet Pressure: Through EN PN 100 and ASME CL600 Maximum Shutoff Pressure Drop: As shown below unless limited by body Valve and Bonnet: Cast iron, steel, or stainless steel pressure-temperature rating or trim capabilities at high temperatures Trim: Any listed in this flier Gaskets: Any listed in this flier Process Fluid Temperature: With plain bonnet, 18 to 232_C for soft seats Packing: Single PTFE V-ring and 232_C for metal seats Other Valve Parts: Steel or stainless steel Ambient Temperature: 40 to 82_C with standard actuator materials; also refer to temperature limits of accessories Air to Close (657 Actuator) Air to Open (667 Actuator) 0 to 1.2 Bar (0 to 18 psig) 0 to 1.2 bar (0 to 18 psig) Port Valve Size Air to Diaphragm Except Air to Diaphragm Except Diameter, Where Indicated Where Indicated mm DN NPS Actuator Size Pressure Drop, Bar Actuator Size Pressure Drop, Bar 25 and 40 1/2, 3/4, 1 and 1-1/2 6.4 9.5 12.7 19.1 25.4 30 30 30 34 34 99.3 99.3 99.3 76.5 34.1 30 30 30 34 34 99.3 99.3 99.3 76.5 40.2 40 1-1/2 38.1 34 15.4 34 15.4 50 2 6.4 9.5 12.7 19.1 25.4 38.1 50.8 40 40 40 45 45 45 45 99.3 99.3 99.3 99.3 58.3 23.4 11.8 40 40 40 45 45 45 45 99.3 99.3 99.3 99.3 58.3 23.4 11.8 80 3 50.8 76.2 45 - - -(1) 3.2 7.1(1) 45 - - -(1) 11.8 10.1(1) 100 4 50.8 101.6 45 - - -(1) 11.8 3.2(1) 45 - - -(1) 11.8 2.7(1) 1. Use a size 45 actuator with 0 to 2.4 bar (0 to 33 psig) air to diaphragm. 23 Product Flier easy-e Valves PF51.1:E July 2008 Typical Valve and Actuator Weight VALVE SIZE APPROXIMATE WEIGHT OF VALVE AND ACTUATOR, kg DN NPS TYPICAL ACTUATOR SIZE --25 40 50 1/2 and 3/4 1 1-1/2 2 30 30 30 40 25 27 34 59 65 80 100 150 2-1/2 3 4 6 40 45 45 50 68 95 116 202 200 100 x 50 150 x 100 200 x 100 8 4x2 6x4 8x4 70 40 45 45 523 123 236 316 200 x 150 300 x 150 250 x 200 300 x 200 8x6 12x6 10x8 12x8 50 50 70 70 351 764 859 971 Typical Dimensions (Plain Bonnet and Standard Stem Diameter) Face-to-Face Dimensions, A (mm) VALVE SIZE ASME NPS PN 16-40 PN 63-100 25 1 160 230 CL150 Raised Face 184 40 1-1/2 200 260 222 235 251 50 2 230 300 254 267 286 65 2-1/2 290 340 276 292 311 80 3 310 380 298 317 337 100 4 350 430 353 368 394 150 6 480 550 451 473 508 200 8 600 650 543 568 613 DN 24 EN CL300 Raised Face 197 CL600 Raised Face 210 Product Flier PF51.1:E July 2008 easy-e Valves Dimensions (mm) with 585C Actuators VALVE SIZE ACTUATOR SIZE Dimensions (mm) with 657 and 667 Actuators VALVE SIZE C DN NPS 25 1 and 1-1/4 25 205 40 1-1/2 25 50 2 65 E E ACTUATOR SIZE C 657 667 567 625 605 700 DN NPS 480 25 1 and 1-1/4 30 34 289 333 205 477 40 1-1/2 30 34 289 333 564 622 602 697 25 50 205 257 518 668 50 2 40 45 333 406 713 824 759 933 2-1/2 25 50 205 257 540 690 65 2-1/2 40 45 333 406 735 846 781 955 80 3 25 50 205 257 544 694 80 3 45 406 850 959 100 4 25 50 205 257 574 724 100 4 45 406 880 989 150 6 50 257 754 150 6 200 8 50 60 70 70 406 473 536 536 973 973 1091 1215 1035 1035 1184 1308 25 Product Flier easy-e Valves PF51.1:E July 2008 Ordering Information When ordering, please specify . . . Application Throttling or on-off Type of Application Reducing or relief Controlled Fluid Include chemical analysis of fluid if possible Specific gravity Fluid Temperature Minimum Inlet Pressures Normal Maximum Minimum flowing Normal flowing Pressure Drops Maximum flowing Maximum at shutoff Minimum controlled Normal Flow Maximum Maximum Permissible Noise Level, if Critical Shutoff Classification Required Line Size, Schedule, and End Connection Type Valve, Actuator, and Accessories From this or other product flier, select your choice wherever a choice is offered. If you cannot find the selection you need, contact your nearest sales office. Note Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end user. 26 Product Flier PF51.1:E July 2008 easy-e Valves 27 Product Flier easy-e Valves PF51.1:E July 2008 Sales Offices For the name and location of your nearest sales office, refer to www.emersonprocess.com/Fisher/support/contactus/index.html or contact our headquarters: Europe Emerson Process Management Prince Regent House Chatham Maritime Kent ME4 4QZ United Kingdom T +44 (0)16 34 89 58 00 F +44 (0)16 34 89 58 42 Middle East and Africa Emerson Process Management P.O. Box 17 003 Jebel Ali Free Zone Dubai United Arab Emirates T +(971) 4 883 5235 F +(971) 4 883 5312 Russia Emerson Process Management Malaya Trubetskaya Street 8 - 11th Floor 119881 Moscow T (7) 095 232 69 68 F (7) 095 245 86 85 Latin America Emerson Process Management Av. Hollingsworth 325 Iporanga Sorocaba, SP CEP 18.087-105 Brazil T +(55)(15)3238-3788 F +(55)(15)3238-3300 Asia Pacific Emerson Process Management Asia Pacific Pte Ltd 1 Pandan Crescent Singapore 128461 Singapore T +(65) 6777 8211 F +(65) 6777 8010 Japan Nippon Fisher Co. Ltd. Shinagawa NF Building 4th Floor, 1-2-5 HigashiShinagawa ShinagawaKu, Tokyo, 140-0002 Japan T (81)-3-5769-6900 F (81)-3-5769-6901 North America Emerson Process Management 301 S. 1st Avenue Marshalltown IA 50158 USA T (641) 754-3011 F (641) 754-2830 Fisher, easye, Cavitrol, ENVIRO-SEAL, FIELDVUE, ValveLink, and Whisper Trim are marks owned by one of the companies in the Emerson Process Management business division of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. HART is a mark owned by the HART Communications Foundation. FOUNDATION fieldbus is a mark owned by the Fieldbus Foundation. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Emerson Process Management Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Chatham, Kent ME4 4QZ UK Dubai, United Arab Emirates Singapore 128461 Singapore www.Fisher.com EFisher 28 Controls International LLC 1997, 2008; All Rights Reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 28 XMP Toolkit : XMP toolkit 3.0-28, framework 1.6 About : uuid:14d052c7-1e42-4920-884b-5467386563e7 Producer : Acrobat Distiller 9.3.2 (Windows) Create Date : 2010:06:10 15:38:35-05:00 Modify Date : 2010:06:14 08:40:44-05:00 Metadata Date : 2010:06:14 08:40:44-05:00 Document ID : uuid:04270981-868c-4464-acff-3c7e8baadf2e Instance ID : uuid:14d052c7-1e42-4920-884b-5467386563e7 Format : application/pdf Title : untitledEXIF Metadata provided by EXIF.tools