Emerson Liebert Intellislot Web 485 Design Installation And Maintenance Guide 29105

: Emerson Emerson-Liebert-Intellislot-Web-485-Design-Installation-And-Maintenance-Guide-165182 emerson-liebert-intellislot-web-485-design-installation-and-maintenance-guide-165182 emerson pdf

Open the PDF directly: View PDF .
Page Count: 2

1

LIEBERT INTELLISLOT® WEB/485 CARD WITH ADAPTER

Product Specification/Installation Sheet

Description

The IntelliSlot Web/485 Card with Adapter

provides 10/100baseT Ethernet Network and

Modbus connectivity for your Emerson Network

Power equipment.

Operating status is monitored and alarms are

communicated via the network, using SNMP

and/or HTTP protocols and over RS-485 using

the Modbus protocol.

Additional Features

Compatibility With Other Emerson Network Power Products

Overall and Mounting Dimensions

• SNMP v1, v2c with MIB-II support

• HTTP/HTTPS 1.1

• Telnet

• BootP, DHCP per RFC2131

• Secure Sockets (SSL)

• Remote firmware updates via HTTP

Precision Cooling Unit (Controller*) *Controller Codes Large UPS

• Liebert Challenger™ 3000 (L00, L15,

LSM, LAM)

• Liebert DataMate™ (L0B)

• Liebert Deluxe System/3™ (L10, L15,

LSM, LAM)

• Liebert Himod™ (LAM)

• Liebert Industrial Cooling Series™

(L10, LSM, LAM)

• Liebert Mini-Mate™ (L0B)

• Liebert Mini-Mate2™ (MM2)

• Liebert Mini-Mate2 8 Ton (L8T)

• Hiross™ Microface IGMnet

• PEC/Atlas™ (CEMS100/LECS15)

L00:

L0B:

L10:

L15:

LSM:

LAM:

Level 00

Level 0B

Level 10

Level 15

Standard

Microprocessor

Advanced

Microprocessor

• Liebert Npower™

• Liebert Series 300™

• Liebert Series 600™/610™ (Single Module)

• Liebert Series 610 System Control Cabinet

(Multi-Module)

• Hiross 7200 (EMEA)

• Hiross HiPulse™ (EMEA)

Power Management

• Liebert Datawave®

• Liebert FPC™

• Liebert Precision Power Center™

• Liebert Static Transfer Switches:

STS™, STS2-3 pole, STS2/PDU

Six holes, each

0.156" diameter

3.2"

(81.3mm)

2.8"

(71.1mm)

7" (177.8mm)

4"

(101.6mm)

2.4"

(61mm)

3.4"

(86.4mm)

0.4" (10.2mm)

0.2" (5mm)

0.6" (15.3mm)

0.8" (20.3mm)

2

© 2007 Liebert Corporation

All rights reserved throughout the world. Specifications subject

to change without notice.

® Liebert and the Liebert logo are registered trademarks of

Liebert Corporation. All names referred to are trademarks or

registered trademarks of their respective owners.

SL-29105_REV02_10-07

Liebert Corporation

1050 Dearborn Drive

P.O. Box 29186

Columbus, OH 43229

Telephone: 1-800-877-9222

Facsimile: 1-614-841-6022

www.liebert.com

Customer Wiring

Specifications

Wiring Specifications

Power

Requirements

AC Inputs 18 - 24 VAC; 50/60 Hz

DC Inputs 12 - 36VDC

Power Consumption 6VA maximum

Dimensions - W x D x H: in. (mm) 7 x 4 x 1.5 (178 x 102 x 38)

Weight Net - oz. (kg) 7 (0.2)

Shipping - lb. (kg) 1.3 (0.6)

Ambient Operating Environment, °F (°C) 32 to 104 (0 to 40); 10% to 90% RH (non-condensing)

Ambient Storage Temperature, °F (°C) -4 to 140 (-20 to 60)

Protection SELV Isolated User Connections, Watchdog Timer Circuitry

Communication

Ports

Service Terminal (RS-232) DB9F, DTE

Unit Input

Communications

TB1, 2-Position Terminal Block

P1, 20-PIN Vertical Header with Ejection Latches (for some UPS models)

Modbus (RS-485) TB2, 2-Position Terminal Block

Ethernet Communications RJ45

Connection Supported Wire Types Maximum Wire Length

TB1 (RS-422) 18-22 AWG Stranded & Shielded; 18 AWG* recommended

Non Plenum - Belden 9461; Plenum - Belden 88761 1000 ft. (300m)

TB2 (RS-485) 18-22 AWG Stranded & Shielded; 18 AWG* recommended

Non Plenum - Belden 9461; Plenum - Belden 88761 3000 ft. (915m)

TB3 (Power Input) 18-22 AWG Stranded & Shielded; 18 AWG* recommended

Non Plenum - Belden 8770; Plenum - Belden 88770 20 ft. (6m)

DB9F Connector DTE Null Modem Cable 50 ft. (15m)

RJ45 Connector Standard Category 5 Cable 328 ft. (100m)

Input power

(input to TB3)

Pin 1(+)

Pin 2(-)

Pin 3 (NC)

Network port

for NMS and

Web access

DTE serial port

for configuration

(requires null-modem

connection)

IGMnet or Liebert SiteScan® Comms

from unit (input to TB1 or P1)

Refer to user manual for details

Modbus output

for BMS

(output from TB2)

TB1: Pin 1 (+), Pin 2 (-)

TB2: Pin 1 (+), Pin 2 (-)