Emtek 2021 Multi Point Lock Trim Price Book (effective 2/1/21) Feb Web

User Manual: Emtek 2021 Emtek Multi-Point Lock Trim Price Book (effective 2/1/21) Price Book

Open the PDF directly: View PDF .
Page Count: 76

Download
Open PDF In Browser	View PDF

MULTI POINT LOCK TRIM
PRICE BOOK
Effective February 1, 2021

Photo by: This Old House, Idea Home East Matunuck Project

TABLE OF CONTENTS

EMTEK MULTI POINT LOCK TRIM FOR SWINGING DOORS

CHOOSE TRIMSETS FROM DOOR & LOCK CONFIGURATIONS, AVAILABLE IN BOTH KEYED AND NON-KEYED FUNCTIONS
Door Manufacturers listed under each configuration are for reference only and are subject to change. Some
retrofitting may be necessary. Please carefully measure and identify your hardware using the diagrams and steps
listed below.
> > To determine your Multi Point Lock configuration:
1) Identify the manufacturer of your door and multi-point lock
2) Measure the center-to-center hole spacing between the lever and the cylinder
3) Check the lever position: is it above or below the cylinder?
4) Identify the type of cylinder used in the door: is it American or Euro Profile Cylinder?

PAGE

4-1/2"

4-1/2"

Large Multi Point Entry Set
3-5/8”

3-5/8”

(92mm)

(92mm)

4-1/2"

4-1/2"

American Cylinder Hub Above/Below Handle,
35⁄8” Center-to-Center

16

ref. G-U®

4-1/2"

Large Multi Point Entry Set
3-5/8”

(92mm)

4-1/2"

Euro Cylinder Hub Below Handle,
35⁄8” Center-to-Center
ref. G-U®

21

TABLE OF CONTENTS

PAGE

Door Configuration #1

26

American Cylinder Hub Below Handle, 35⁄8” Center-to-Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen®,
Marvin Integrity®, Paddock Lockmaster™, Superior®

Door Configuration #2

32

American Cylinder Hub Above Handle, 35⁄8” Center-to-Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Door Configuration #3

38

American Cylinder Hub Above Handle, 41⁄8” Center-to-Center
ref. Andersen®

Door Configuration #4

American Cylinder Hub Above Handle, 35⁄8” Center-to-Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom
Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection
(formerly Norco®), Weathershield®

4

44

Door Configuration #5

50

Euro Profile Cylinder Below Handle, 35⁄8” Center-to-Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®,
Loewen®, Paddock Lockmaster™, Peachtree®, Semco®, Sierra
Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®,
Windsor®, Weathershield®

Door Configuration #6

TABLE OF CONTENTS

PAGE

56

American Cylinder Hub Below Handle, 35⁄8” Center-to-Center
ref. Milgard®, Pella®

Door Configuration #7

62

American Cylinder Hub Above Handle, 6” Center-to-Center
ref. Trillenium® (formerly W&F Manufacturing)

15/8"

Door Configuration #8

67

American Cylinder Hub Above Handle, 51/4” Center-to-Center

51/4"
87/8"

ref. Neuma Doors®

Product Index
Order Form
Lifetime Limited Warranty

72
74
75
5

Door Manufacturers listed under each configuration are for reference only and are subject to
change. Some retrofitting may be necessary. Please carefully measure and identify your hardware
using the diagrams and steps listed on pages 3, 4 and 5.

G-U® is a registered trademark of G-U Hardware, Inc. Paddock™ is a registered trademark of Yale® UK. Pella® is a registered
trademark of Pella Corporation. Sierra Pacific Windows® is a registered trademark of Sierra Pacific Industries. Superior® is a
registered trademark of Superior Engineered Products Corporation. Willmar® is a registered trademark of JELD-WEN of Canada Ltd.
Andersen® is a registered trademark of Andersen Corporation. Trillenium® is a registered trademark of Endura Products, Inc. Eagle®
is a registered trademark of Eagle Window and Door, Inc, BiltBest® is a registered trademark of BiltBest Windows and Patio Doors.
Ashland® is a registered trademark of Ashland Products, Inc. Caradco®, JELD-WEN, Norco® and Pozzi® are registered trademarks of
JELD-WEN Inc., Oregon, USA. Integrity® and Marvin® are registered trademarks of Marvin Windows and Doors. Milgard® is a
registered trademark of Milgard Windows, Inc. Therma-Tru® is a registered trademark of Therma-Tru Doors®. HOPPE® is a registered
trademark of HOPPE North America, Inc. Hurd® is a registered trademark of Hurd Millwork Company. Kolbe & Kolbe® is a registered
trademark of Kolbe & Kolbe Millwork Company, Inc. Lincoln® is a registered trademark of Lincoln Wood Products, Inc. Loewen® is
a registered trademark of Loewen Windows. PGT® is a registered trademark of PGT Industries. Peachtree® and Vetter® are
registered trademark of The Peachtree Companies, Inc. Semco® is a registered trademark of Semling-Menke Co. Inc. Weathershield®
is a registered trademark of Weathershield Mfg. Inc. KML by Andersen® is a registered trademark of KML by Andersen. Atrium® is
a registered trademark of Atrium. KFV® is a registered trademark of KFV. Simpson® is a registered trademark of Simpson.
Signature® is a registered trademark of Signature. Crestline® is a registered trademark of Crestline. Windsor® is a registered
trademark of Windsor. Neuma Doors® is a registered trademark of Nan Ya Plastics Corporation. With the exception of Paddock™,
none of the aforementioned companies are affiliated with Emtek Products, Inc.

6

Polished Brass Lifetime (US3)

Unlacquered Brass
(US3NL)*

Satin Brass
(US4)

French Antique
(US7)

Oil Rubbed Bronze
(US10B)

Polished Nickel Lifetime (US14)

Satin Nickel
(US15)

Pewter
(US15A)

Flat Black
(US19)

Medium Bronze
Patina (MB)

Tumbled White
Bronze (TWB)

FINISH OPTIONS

*Unlacquered Brass (US3NL) is a
custom, made-to-order finish. It is available with
an upcharge, per item and requires an additional
2-3 day lead time. This living finish will gracefully
age and evolve in appearance over time. Because
of this characteristic, no finish warranty is offered
on unlacquered brass products.

Polished Chrome
(US26)

Bronze Patina is a living finish that will age
gracefully, revealing the underlying bronze over
time. Because of this characteristic, no finish
warranty is offered on bronze patina products.

Flat Black Bronze
Patina (FB)

Stainless Steel carries a five-year finish

warranty. All stainless steel will require some
periodic cleaning to keep your hardware looking
like new.
Brushed Stainless
Steel (SS)
7

GENERAL INFORMATION

ORDERING AND RETURNS

SHIPPING AND FREIGHT

Placing Orders
You have several options to place an order:
• Email: orders@emtek.com
• Fax: 800-577-5771
• Phone: 800-356-2741, Option 1

Shipping Costs
All orders are FOB shipping point. For shipments to a dealer-specified
commercial address located in the US, Canada and Mexico, EMTEK ships
freight prepaid. For shipments to dealers located outside of North
America, freight will be prepaid by EMTEK to the U.S. location of the
dealer’s freight forwarder. Orders may ship ground service or LTL at our
discretion. Orders shipping to a residential address will automatically
ship via ground service with a 10% surcharge.

Hours of Operation
Monday – Friday: 5:00 AM - 5:00 PM Pacific Time.
Minimum Order Requirements
There are no minimum order quantity requirements.

Shipping Options
Shipments may be expedited for a fee. Unfortunately, a dealer’s
freight account cannot be used to pay for shipping charges.

Payment Terms
Net 30 Days on established credit.
Payment Options
We accept check, Visa, MasterCard, Discover, AMEX, and ACH.
Sales Tax
Sales tax will be charged unless a resale certificate has been provided.
Prices
All prices listed are in US funds. Our prices are subject to change without
prior notice.
Returns
• For your convenience, returns do not require authorization. Returns
can be processed directly from the EMTEK website, www.emtek.com.
• Click on the “Dealer Site” icon on the right side of the bottom half of
the www.emtek.com home page, and then select “Product Returns”.
Fill out the RGA form, and follow the link to generate a UPS call tag
(terms and conditions apply – see the website for details).
• A completed RGA form must accompany all packages for returned
goods.
• Returns are accepted from the EMTEK dealer who originally 		
purchased the product that is being returned. Any refund or credit
would only be made to the original dealer.
• All returned goods are subject to a minimum 25% restocking fee.
• Returns for reasons other than an EMTEK factory or processing error
will be subject to our customary restocking fee with a return freight
charge of $15.00 per label/carton in the United States or $30.00 per
label/carton in Canada or Mexico. This charge will be deducted from
the credit issued for each call tag.
• No freight will be charged if the return is sent prepaid.

Delivery Location

Type of Service

Commercial Address

Next Day

16%

Commercial Address

Second Day

6%

Residential Address

Next Day

25%

Residential Address

Second Day

20%

Residential Address

Three Day

15%

Residential Address

Ground (Default Service)

10%

Surcharge %*

*Multiplied by invoice value
Order Lead Time
EMTEK assembles all products to order in our Southern California facility.
Orders typically ship within two to three business days once an order is
released to the factory.
DEALER INFORMATION PORTAL
Online Account Access and Web Shop
We are pleased to offer you access to your EMTEK account information and
place new orders through the ASSA ABLOY dealer information portal. Through
the dealer portal you can access information about your account at any time.
You can:
•
•
•
•
•

Check on the status of orders
View both order and sales history
View and print order acknowledgments, invoices, statements and credits
Track shipments
Place a new order via the Emtek Web Shop

To register for the ASSA ABLOY dealer portal or to make changes to access
rights, we require the approval from your company’s owner, CEO, President,
or other corporate officer. To get started, Click on the “Dealer Site” icon on the
bottom half of the www.emtek.com home page, and then select “Forms &
Instructions”. Please complete the “Dealer Portal Access Rights Form” and
email to: Connect.emtek@assaabloy.com. Should you have any questions,
please contact Customer Service.
8

Sample Program
Samples are gladly provided at no charge to authorized dealers, under the
following conditions:
•
•
•
•

½ Door Lock Dummy (max 2)
½ Pair of Hinges (max 2)
Cabinet Knob or Pull (max 3)
Door Accessory (max 1)

A shipping and handling fee of $2.50 per sample will be applied to your order
($2.50 for one sample, $5.00 for two samples, $7.50 for three samples, etc.)
Sample Order Exceptions
• Samples must be different product codes.
• Samples do not include active door hardware sets, 8” or larger cabinet pulls,
door pulls, appliance pulls, electronic locks, entry sets, bath hardware or
door accessories over $75 list.
Placing a Sample Order
• Send orders to samples@emtek.com or place by fax, phone, or mail.
• Write “NO CHARGE SAMPLE” on the order.
• Standard shipment upgrade charges will apply for expedited freight 		
requests.
• Orders for sample products must be placed separately and not combined
with other products.
• EMTEK does not require samples to be returned.
No Restocking Fee Charged for Sample Orders with Exceptions
• Send orders to samples@emtek.com or place by fax, phone, or mail.
• Write “DEALER SAMPLE” on the order.
• Keep the samples you want and return the samples you don’t.
• Contact Customer Service for Return Authorization in advance to ensure a
restock fee is not applied to the return.
• Product must be returned in its original condition.
• Return freight charge of $15.00 per label/carton in the United States or
$30.00 per label/carton in Canada or Mexico. This charge will be deducted
from the credit issued for each call tag.
• No freight will be charged if the return is sent prepaid.
NO CHARGE DISPLAY PROGRAM
Display Program
EMTEK offers a variety of quality, well-crafted displays. We take great pride in the
quality of our displays, which are hand-built in our Southern California facility by
our talented craftsmen.

Minimum Advertised Price Policy
Effective February 6, 2017
EMTEK has determined that in order to better compete against
existing competitors it must exercise a greater degree of
control over the distribution of its products. Therefore, all sales
of EMTEK products will be subject to this Policy. This Policy has
been unilaterally adopted and will be enforced strictly and
uniformly.
Although resellers remain free to establish their own resale
prices, to the extent that any customer elects to advertise
products of EMTEK in any manner, that is in print, in electronic
media, on its website, etc., and provides price information for
such products, that price information must be no less than List
Price less 20%, this is the Minimum Advertised Price (MAP).
Advertisements and offers to sell that do not include a
particular price, but require further action that implies a price
that is lower than the Minimum Advertised Price violate the
MAP Policy. Examples of such unauthorized advertisements
include “drop in cart” pricing, “add to cart” pricing, “click to
see” pricing, and discount coupon pricing. Also prohibited are
advertisements that indicate that discounts may be available
when a customer takes specific action that goes beyond
buying the product, such as “special price option” or “name
your price.”

GENERAL INFORMATION

NO CHARGE SAMPLE PROGRAM

To assure fair business practices, we will strictly enforce this
policy. Violations of this MAP Policy will include termination of
our business relationship with a customer. On the first offense
there will be a written notice counseling any customer that
disregards this policy. Any customer who violates the policy a
second time, within one year of receiving a written notice of a
first violation, will be terminated.
EMTEK will not discuss any conditions of acceptance related to
this Policy, as it is non-negotiable and will not be altered for
any dealer. In addition, EMTEK neither solicits, nor will it
accept, any assurance of compliance with this Policy. Nothing
in this Policy shall constitute an agreement between EMTEK
and any reseller that the reseller will comply with this Policy.

• Click on the “Dealer Site” icon on the right side of the bottom half of the
www.emtek.com home page, and then select “Displays”.
• Browse our online catalog using the navigation system on the left column to
view by function, style, or material.
Placing a Display Order
Please contact your local sales representative for ordering information.
Product for use on Displays in your Showroom
Thank you for considering EMTEK products for use on door displays and kitchen/
bath vignettes installed in your showroom. Please contact your local sales
representative for ordering information.
9

LEVER OPTIONS

SELECT BRASS

L-Square Faceted
(LS.FA)

L-Square Hammered
(LS.HA)

L-Square Knurled
(LS.KN)

L-Square Tribeca
(LS.TR)

L-Square Straight Knurled
(LS.SK)

L-Square White Marble
(LS.MRWH)

T-Bar Faceted
(TA.FA)*

T-Bar Hammered
(TA.HA)*

T-Bar Knurled
(TA.KN)*

T-Bar Tribeca
(TA.TR)*

T-Bar Straight Knurled
(TA.SK)*

T-Bar White Marble
(TA.MRWH)*

R-Bar Faceted
(RA.FA)

R-Bar Hammered
(RA.HA)

R-Bar Knurled
(RA.KN)

R-Bar Tribeca
(RA.TR)

R-Bar Straight Knurled
(RA.SK)

R-Bar White Marble
(RA.MRWH)

Athena Lever
(ATN)

Helios Lever
(HLO)

Hermes Lever
(HER)

Luzern Lever
(LU)

Poseidon Lever
(POS)

Stuttgart Lever
(STU)

Argos Lever
(AG)

Aston Lever
(AST)

Basel Lever
(BA)

Breslin Lever
(BRL)

Dumont Lever
(DT)

Freestone Lever
(FRL)*

Geneva Lever
(GV)*

Hercules Lever
(HEC)

Mercury Lever
(MC)

Myles Lever
(MYL)*

Sion Lever
(SIO)

Spencer Lever
(SPN)

DESIGNER

CLASSIC

MODERN BRASS

Triton Lever
(TRT)

DESIGNER

CLASSIC

SOLID BRASS

Cortina Lever
(C)

Milano Lever
(M)

Merrimack Lever
(ME)

Turino Lever
(T)

Coventry Lever
(CV)

Elan Lever
(EN)

Ribbon & Reed Lever
(RBL)

Rope Lever
(RL)

Santa Fe Lever
(SF)

Rustic Lever
(R)

Wembley Lever
(WM)

ARTS & CRAFTS BRASS

Arts & Crafts Lever
(AC)

10

Hammered Lever
(HM)

* Note: You will need to ensure the necessary opening/closing clearance when
using certain lever designs. Dimensions from the center of the stem to the
end of the lever overhang have been provided: T-Bar 3/4”, Geneva 11/8”, Myles 3/4”,
Freestone 1”, Yuma 11/8”.

SANDCAST BRONZE

Bryce Lever
(BR)

Cimarron Lever
(CR)

Cody Lever
(CD)

Mariposa Lever
(MA)

Montrose Lever
(MT)

Teton Lever
(TT)

Yuma Lever
(YM)*

Napoli Lever
(NA)

Octagon Lever
(OCL)

Padua Lever
(PD)

Athena Lever
(AT)

Cologne Lever
(CO)

Dresden Lever
(DD)

Helios Lever
(HL)

Kiel Lever
(KL)

Poseidon Lever
(PO)

Stuttgart Lever
(STT)

Durango Lever
(D)

Lariat Lever
(LR)

Hercules Lever
(HS)

Hermes Lever
(HES)

LEVER OPTIONS

Aurora Lever
(AR)

LOST WAX CAST BRONZE

Medici Lever
(MDI)

STAINLESS STEEL

Determining handing for door hardware is different than determining handing for carpentry (ordering and
hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the
diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the
diagram below and if you have any questions, call Customer Service at (800) 356-2741, Option 1.

IN-SWING
DOOR

LEFT
(LH)

IN-SWING
DOOR

RIGHT
(RH)

OUT-SWING
DOOR

OUT-SWING
DOOR

LEFT
(LH)

RIGHT
(RH)

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE

11

L-Square Faceted
(LS.FA)

L-Square Hammered
(LS.HA)

L-Square Knurled
(LS.KN)

L-Square Tribeca
(LS.TR)

L-Square Straight Knurled
(LS.SK)

L-Square White Marble
(LS.MRWH)

T-Bar Faceted
(TA.FA)*

T-Bar Hammered
(TA.HA)*

T-Bar Knurled
(TA.KN)*

T-Bar Tribeca
(TA.TR)*

T-Bar Straight Knurled
(TA.SK)*

T-Bar White Marble
(TA.MRWH)*

R-Bar Faceted
(RA.FA)

R-Bar Hammered
(RA.HA)

R-Bar Knurled
(RA.KN)

R-Bar Tribeca
(RA.TR)

R-Bar Straight Knurled
(RA.SK)

R-Bar White Marble
(RA.MRWH)

Athena Lever
(ATN)

Helios Lever
(HLO)

Hermes Lever
(HER)

Luzern Lever
(LU)

Poseidon Lever
(POS)

Stuttgart Lever
(STU)

Argos Lever
(AG)

Aston Lever
(AST)

Basel Lever
(BA)

Breslin Lever
(BRL)

Dumont Lever
(DT)

Freestone Lever
(FRL)*

Geneva Lever
(GV)*

Hercules Lever
(HEC)

Mercury Lever
(MC)

Myles Lever
(MYL)*

Sion Lever
(SIO)

Spencer Lever
(SPN)

CLASSIC

MODERN BRASS

DESIGNER

LEVER FINISH AVAILABILITY CHART

SELECT BRASS

Triton Lever
(TRT)

DESIGNER

CLASSIC

SOLID BRASS

Cortina Lever
(C)

Milano Lever
(M)

Merrimack Lever
(ME)

Turino Lever
(T)

Coventry Lever
(CV)

Elan Lever
(EN)

Ribbon & Reed Lever
(RBL)

Rope Lever
(RL)

Santa Fe Lever
(SF)

Rustic Lever
(R)

Wembley Lever
(WM)

ARTS & CRAFTS BRASS

Arts & Crafts Lever
(AC)

US3
Lifetime

12

US4

* Note: You will need to ensure the necessary opening/closing clearance when
using certain lever designs. Dimensions from the center of the stem to the
end of the lever overhang have been provided: T-Bar 3/4”, Geneva 11/8”, Myles 3/4”,
Freestone 1”, Yuma 11/8”.

Hammered Lever
(HM)

US7

US10B

US14
Lifetime

US15

US15A

US19

US26

US3NL*

*Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully
age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products.

SELECT
Brass
Levers

L-Square Faceted (LS.FA)
L-Square Hammered (LS.HA)
L-Square Knurled (LS.KN)
L-Square Tribeca (LS.TR)
L-Square Straight Knurled (LS.SK)
L-Square White Marble (LS.MRWH)
T-Bar Faceted (TA.FA)
T-Bar Hammered (TA.HA)
T-Bar Knurled (TA.KN)
T-Bar Tribeca (TA.TR)
T-Bar Straight Knurled (TA.SK)
T-Bar White Marble (TA.MRWH)
R-Bar Faceted (RA.FA)
R-Bar Hammered (RA.HA)
R-Bar Knurled (RA.KN)

US4

US7

US10B

US14
Lifetime

US15

US15A

US19

US26 US3NL*

LEVER FINISH AVAILABILITY CHART

US3
Lifetime

R-Bar Tribeca (RA.TR)
R-Bar Straight Knurled (RA.SK)

Modern
Classic
Brass
Levers

R-Bar White Marble (RA.MRWH)
Athena Lever (ATN)
Helios Lever (HLO)
Hermes Lever (HER)
Luzern Lever (LU)
Poseidon Lever (POS)

Modern
Designer
Brass
Levers

Stuttgart Lever (STU)
Argos Lever (AG)
Aston Lever (AST)
Basel Lever (BA)
Breslin Lever (BRL)
Dumont Lever (DT)
Freestone Lever (FRL)
Geneva Lever (GV)
Hercules Lever (HEC)
Mercury Lever (MC)
Myles Lever (MYL)
Sion Lever (SIO)
Spencer Lever (SPN)
Triton Lever (TRT)

Classic Cortina Lever (C)
Brass Milano Lever (M)
Levers

Merrimack Lever (ME)
Turino Lever (T)

Designer Coventry Lever (CV)
Brass Elan Lever (EN)
Levers

Ribbon & Reed Lever (RBL)
Rope Lever (RL)
Rustic Lever (R)
Santa Fe Lever (SF)
Wembley Lever (WM)

Arts & Arts & Crafts Lever (AC)
Crafts Hammered Lever (HM)

13

LEVER FINISH AVAILABILITY CHART

SANDCAST BRONZE

Aurora Lever
(AR)

Mariposa Lever
(MA)

Bryce Lever
(BR)

Montrose Lever
(MT)

Cimarron Lever
(CR)

Teton Lever
(TT)

Cody Lever
(CD)

Durango Lever
(D)

Lariat Lever
(LR)

Hercules Lever
(HS)

Hermes Lever
(HES)

Yuma Lever
(YM)

LOST WAX CAST BRONZE

Medici Lever
(MDI)

Napoli Lever
(NA)

Octagon Lever
(OCL)

Padua Lever
(PD)

STAINLESS STEEL

FB*

Athena Lever
(AT)

Cologne Lever
(CO)

Dresden Lever
(DD)

Kiel Lever
(KL)

Poseidon Lever
(PO)

Stuttgart Lever
(STT)

MB*

TWB*

Helios Lever
(HL)

SS**

*Bronze Patina is a living finish that will age gracefully, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.
**Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.
14

MB*

TWB*

FB*

MB*

Sandcast Aurora Lever (AR)
Bronze Levers
Bryce Lever (BR)

Cimarron Lever (CR)
Cody Lever (CD)
Durango Lever (D)
Lariat Lever (LR)
Mariposa Lever (MA)
Montrose Lever (MT)
Teton Lever (TT)
Yuma Lever (YM)

LEVER FINISH AVAILABILITY CHART

FB*

Lost Wax Cast Medici Lever (MDI)
Bronze Levers
Napoli Lever (NA)

Octagon Lever (OCL)
Padua Lever (PD)

SS**

Stainless Steel Athena Lever (AT)
Levers

Cologne Lever (CO)
Dresden Lever (DD)
Helios Lever (HL)
Hercules Lever (HS)
Hermes Lever (HES)
Kiel Lever (KL)
Poseidon Lever (PO)
Stuttgart Lever (STT)

15

LARGE MULTI POINT
ENTRY SETS

Each Multi Point Lock Trim now includes the Spring Assist function which
returns the lever to the neutral position and eliminates sagging handles.

American Cylinder Hub, Above / Below Handle
35⁄8” Center to Center
4-1/2"

23/8” Minimum Backset Required

2-3/8”
(60 mm)
minimum
backset

3-5/8”

(92mm)

4-1/2"

Brass Modern Rectangular

Brass Modern Rectangular

American Cylinder Above Handle
21⁄2” x 171⁄2” Keyed

BRASS PLATES, MODERN RECTANGULAR STYLE

Product Code

Sets with 2.5” x 17.5” Plates
Keyed with American Cylinder, Hub ABOVE Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1R21

Non-Keyed Passage

1L1R22

Non-Keyed American Style Thumbturn Inside

1L1R23

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1R24

American Cylinder Below Handle
21⁄2” x 171⁄2” Keyed

Lever Style (LH/RH)

Finish

List Price

See Page 10 for Brass
& Modern Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

$438.00

1L1R25

Keyed with American Cylinder, Hub BELOW Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1R11

Non-Keyed Passage

1L1R12

Non-Keyed American Style Thumbturn Inside

1L1R13

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1R14
1L1R15

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
16

*Unlacquered Brass (US3NL)
finish available for a $50 List Price
upcharge per item.

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

Ref. G-U®

LARGE MULTI POINT ENTRY SETS

4-1/2"

2-3/8”
(60 mm)
minimum
backset

3-5/8”

(92mm)

4-1/2"

Brass Melrose

Brass Melrose

American Cylinder Above Handle
27/8” x 171/2” Keyed

BRASS PLATES, MELROSE STYLE

Product Code

Sets with 2.9” x 17.5” Plates
Keyed with American Cylinder, Hub ABOVE Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1M21

Non-Keyed Passage

1L1M22

Non-Keyed American Style Thumbturn Inside

1L1M23

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1M24

Keyed with American Cylinder, Hub BELOW Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

American Cylinder Below Handle
27/8” x 171/2” Keyed

Lever Style (LH/RH)

Finish

List Price

See Page 10 for Brass
& Modern Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

$438.00

1L1M25
1L1M11
1L1M12
1L1M13
1L1M14
1L1M15

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

*Unlacquered Brass (US3NL)
finish available for a $50 List Price
upcharge per item.

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
17

LARGE MULTI POINT
ENTRY SETS

Each Multi Point Lock Trim now includes the Spring Assist function which
returns the lever to the neutral position and eliminates sagging handles.

American Cylinder Hub, Above / Below Handle
35⁄8” Center to Center
4-1/2"

23/8” Minimum Backset Required

2-3/8”
(60 mm)
minimum
backset

3-5/8”

(92mm)

4-1/2"

Sandcast Bronze Arched

Sandcast Bronze Arched

3” x 171/2” Keyed

3” x 171/2” Keyed

American Cylinder Above Handle

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Sets with 3” x 17.5” Plates
Keyed with American Cylinder, Hub ABOVE Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1A21

Non-Keyed Passage

1L1A22

Non-Keyed American Style Thumbturn Inside

1L1A23

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1A24

American Cylinder Below Handle

Lever Style (LH/RH)

Finish

List Price

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

$563.00

1L1A25

Keyed with American Cylinder, Hub BELOW Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1A11

Non-Keyed Passage

1L1A12

Non-Keyed American Style Thumbturn Inside

1L1A13

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1A14
1L1A15

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
18

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

Specification Sheet for Trim and Cylinder Styles

LARGE MULTI POINT ENTRY SETS

Cylinder Tailpiece

4-1/2"

2-3/8”
(60 mm)
minimum
backset

Steel
Spindle

3-5/8”

(92mm)

Rosette
Screws

4-1/2"

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/8”

Standard Components:
• Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2” Rosette Screws

Extended Components:
• Long Single Cylinder Tailpiece
• 5” Steel Spindle
• 2 1/2” Rosette Screws

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/8”

Standard Components:
• Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 5” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

emtek.com 800.356.2741

Dimples drilled in plug
in this position

19

LARGE MULTI POINT ENTRY SETS

Each Multi Point Lock Trim now includes the Spring Assist function which
Specification Sheet
for Components
andneutral
Door Thickness
returns
the lever to the
position and eliminates sagging handles.

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
American Cylinder Above Handle

1/2”

American Cylinder Below Handle

12-1/2”

3-5/8”

3-5/8”

1/2”

12-1/2”

Non-Keyed with Cylinder Plugs, Passage (for Semi-Active Door)
American Cylinder Above Handle

American Cylinder Below Handle

Cylinder Plug

Non-Keyed with Cylinder Plug, American Style Thumbturn Inside (for Active Door)
American Cylinder Above Handle

American Cylinder Below Handle

Non-Keyed with Cylinder Plugs, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
American Cylinder Above Handle

American Cylinder Below Handle

Fixed
Fixed

Dummy Pair with Cylinder Plugs (for Non-Active Door)
American Cylinder Above Handle

American Cylinder Below Handle

Fixed
Fixed

20

Fixed

Fixed

emtek.com 800.356.2741

LARGE MULTI POINT
ENTRY SETS

Each Multi Point Lock Trim now includes the Spring Assist function which
returns the lever to the neutral position and eliminates sagging handles.

Euro Cylinder Hub, Below Handle
35⁄8” Center to Center
4-1/2"

23/8” Minimum Backset Required

2-3/8”
(60 mm)
minimum
backset

3-5/8”

(92mm)

4-1/2"

Brass Modern Rectangular
Euro Cylinder Below Handle
21⁄2” x 171⁄2” Keyed

BRASS PLATES, MODERN RECTANGULAR STYLE

Product Code

Sets with 2.5” x 17.5” Plates
Keyed with Euro Cylinder, Hub BELOW Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1R51

Non-Keyed Passage

1L1R52

Non-Keyed Euro Style Thumbturn Inside

1L1R53

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1R54

Lever Style (LH/RH)

Finish

List Price

See Page 10 for Brass
& Modern Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

$438.00

1L1R55

*Unlacquered Brass (US3NL)
finish available for a $50 List Price
upcharge per item.

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
To order: Product Code + Lever Style + Handing + Finish Code

Weiser® keyway not available with Euro cylinder.
21

LARGE MULTI POINT
ENTRY SETS

Each Multi Point Lock Trim now includes the Spring Assist function which
returns the lever to the neutral position and eliminates sagging handles.

Euro Cylinder Hub, Below Handle
35⁄8” Center to Center
4-1/2"

23/8” Minimum Backset Required

2-3/8”
(60 mm)
minimum
backset
3-5/8”

(92mm)

4-1/2"

Brass Melrose

Euro Cylinder Below Handle
27/8” x 171/2” Keyed

BRASS PLATES, MELROSE STYLE

Product Code

Sets with 2.9” x 17.5” Plates
Keyed with Euro Cylinder, Hub BELOW Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1M51

Non-Keyed Passage

1L1M52

Non-Keyed Euro Style Thumbturn Inside

1L1M53

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1M54

Lever Style (LH/RH)

Finish

List Price

See Page 10 for Brass
& Modern Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

$438.00

1L1M55

*Unlacquered Brass (US3NL)
finish available for a $50 List Price
upcharge per item.

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
22

Weiser® keyway not available with Euro cylinder.
To order: Product Code + Lever Style + Handing + Finish Code

Ref. G-U®

LARGE MULTI POINT ENTRY SETS

4-1/2"

2-3/8”
(60 mm)
minimum
backset
3-5/8”

(92mm)

4-1/2"

Sandcast Bronze Arched
Euro Cylinder Below Handle

3” x 171/2” Keyed

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Sets with 3” x 17.5” Plates
Keyed with Euro Cylinder, Hub BELOW Handle
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

1L1A51

Non-Keyed Passage

1L1A52

Non-Keyed Euro Style Thumbturn Inside

1L1A53

Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1L1A54

Lever Style (LH/RH)

Finish

List Price

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

$563.00

1L1A55

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser® keyway not available with Euro cylinder.
23

LARGE MULTI POINT ENTRY SETS

Each Multi Point Lock Trim now includes the Spring Assist function which
Specification Sheet
for Components
andneutral
Door Thickness
returns
the lever to the
position and eliminates sagging handles.

Full Euro Profile Cylinder

4-1/2"

Full Euro Profile Cylinder

Steel
Spindle
Cylinder
Screw

Half Euro Profile Cylinder

2-3/8”
(60 mm)
minimum
backset
3-5/8”

CY4-ERSGL32

CY4-ERHLF19TT

(92mm)

CY4-ERSGL35

CY4-ERHLF21TT

4-1/2"

Rosette
Screws

Keyed Plates with Euro Profile Cylinder
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/8”

• 3 5/32” (3.16”) Euro Profile Cylinder
• 4 1/2” Steel Spindle
• 2” Rosette Screws

• 3 17/32” (3.54”) Euro Profile Cylinder
• 5” Steel Spindle
• 2 1/2” & 3” Screws

Non-Keyed Plates with Euro Profile Half Cylinder
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/8”

• 1 31/32” (1.98”) Euro Profile Cylinder
• 4 1/2” Steel Spindle
• 2” Rosette Screws

• 2 5/32” (2.15”) Euro Profile Cylinder
• 5” Steel Spindle
• 2 1/2” & 3” Screws

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/8”

• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks

24

emtek.com 800.356.2741

Specification Sheet for Trim and Cylinder Styles

LARGE MULTI POINT ENTRY SETS

Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)
Euro Cylinder Below Handle

1/2”

3-5/8”

12-1/2”

Non-Keyed with Cylinder Plugs, Passage (for Semi-Active Door)
Euro Cylinder Below Handle
Cylinder Plug

Non-Keyed with Cylinder Plug, Euro Profile Style Thumbturn Inside (for Active Door)
Euro Cylinder Below Handle

Non-Keyed with Cylinder Plugs, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Euro Cylinder Below Handle

Fixed

Dummy Pair with Cylinder Plugs (for Non-Active Door)
Euro Cylinder Below Handle

Fixed

emtek.com 800.356.2741

Fixed

25

DOOR CONFIGURATION

#1
American Cylinder Hub Below Handle
35⁄8” Center-to-Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen®
Marvin Integrity®, Paddock Lockmaster™, Superior®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

Brass Concord

2” x 101⁄2” Keyed
Cortina Levers

11⁄2” x 11” Non-Keyed
Rustic Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1171

See Page 10 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1172
1173
1174
1175

List Price

$244.00

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1181
1182
1183
1184
1185

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
26

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.
Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

DOOR CONFIGURATION #1

Brass Modern

Brass Modern

11⁄2” x 11” Non-Keyed
Luzern Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

11A1

See Page 10 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Triton Levers

11A2
11A3
11A4
11A5

List Price

$244.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

11B1
11B2
11B3
11B4
11B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

Stainless Steel

11⁄2” x 11” Non-Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

11A1

2” x 10” Keyed
Dresden Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

List Price

$244.00

11A2
11A3
11A4
11A5

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

11B1
11B2
11B3
11B4
11B5

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
27

DOOR CONFIGURATION

#1
American Cylinder Hub Below Handle
35⁄8” Center-to-Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen®
Marvin Integrity®, Paddock Lockmaster™, Superior®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast
Arched

Sandcast
Arched

11⁄2” x 11” Non-Keyed
Cimarron Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1111

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Durango Levers

List Price

$272.00

1112
1113
1114
1115

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1121
1122
1123
1124
1125

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
28

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

DOOR CONFIGURATION #1

Sandcast
Rectangular

Sandcast
Rectangular

11⁄2” x 11” Non-Keyed
Cody Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1151

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Montrose Levers

List Price

$272.00

1152
1153
1154
1155

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1161
1162
1163
1164
1165

Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Non-Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Lever Style (LH/RH)

Finish

1131

See Page 11 for
Lost Wax Cast
Bronze Lever
Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

Sets with 11⁄2” x 111⁄8” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 101⁄2” Keyed
Medici Levers

List Price

$272.00

1132
1133
1134
1135

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1141
1142
1143
1144
1145

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
29

DOOR CONFIGURATION #1

Specification Sheet for Components and Door Thickness

Door Configuration # 1 American Cylinder Below Handle 3 5/8" Center-to-Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

30

Dimples drilled in plug
in this position

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #1

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1111, 1131, 1151, 1171, 11A1

Product Codes 1121, 1141, 1161, 1181, 11B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1112, 1132, 1152, 1172, 11A2

Product Codes 1122, 1142, 1162, 1182, 11B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
Product Codes 1113, 1133, 1153, 1173, 11A3

Product Codes 1123, 1143, 1163, 1183, 11B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Plates, Product Codes 1114, 1134, 1154, 1174, 11A4

Fixed

Product Codes 1124, 1144, 1164, 1184, 11B4

Fixed

Dummy Pair (for Non-Active Door)
Plates, Product Codes 1115, 1135, 1155, 1175, 11A5

Fixed

emtek.com 800.356.2741

Fixed

Product Codes 1125, 1145, 1165, 1185, 11B5

Fixed

Fixed

31

DOOR CONFIGURATION

#2
American Cylinder Hub Above Handle
35⁄8” Center-to-Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

Brass Concord

11⁄2” x 11” Non-Keyed
Turino Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1271

See Page 10 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 101⁄2” Non-Keyed
Santa Fe Levers

1272
1273
1274
1275

List Price

$244.00

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1281
1282
1283
1284
1285

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
32

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.
Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

DOOR CONFIGURATION #2

Brass Modern

Brass Modern

11⁄2” x 11” Non-Keyed
Helios Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

12A1

See Page 10 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Non-Keyed
Hercules Levers

12A2
12A3
12A4
12A5

List Price

$244.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

12B1
12B2
12B3
12B4
12B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

Stainless Steel

11⁄2” x 11” Keyed
Poseidon Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

12A1

2” x 10” Non-Keyed
Hermes Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

List Price

$244.00

12A2
12A3
12A4
12A5

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

12B1
12B2
12B3
12B4
12B5

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
33

DOOR CONFIGURATION

#2
American Cylinder Hub Above Handle
35⁄8” Center-to-Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

Sandcast Arched

11/2” x 11” Keyed
Durango Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1211

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Teton Levers

List Price

$272.00

1212
1213
1214
1215

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1221
1222
1223
1224
1225

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
34

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

DOOR CONFIGURATION #2

Sandcast Rectangular

Sandcast Rectangular

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1251

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Montrose Levers

List Price

$272.00

1252
1253
1254
1255

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1261
1262
1263
1264
1265

Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Non-Keyed
Napoli Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Lever Style (LH/RH)

Finish

1231

See Page 11 for
Lost Wax Cast
Bronze Lever
Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

Sets with 11⁄2” x 111⁄8” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 101⁄2” Non-Keyed
Padua Levers

List Price

$272.00

1232
1233
1234
1235

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1241
1242
1243
1244
1245

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
35

DOOR CONFIGURATION #2

Specification Sheet for Components and Door Thickness

Door Configuration #2 American Cylinder Above Handle 3 5/8" Center-to-Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

36

Dimples drilled in plug
in this position

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #2

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1211, 1231, 1251, 1271, 12A1

Product Codes 1221, 1241, 1261, 1281, 12B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1212, 1232, 1252, 1272, 12A2

Product Codes 1222, 1242, 1262, 1282, 12B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
Product Codes 1213, 1233, 1253, 1273, 12A3

Product Codes 1223, 1243, 1263, 1283, 12B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Product Codes 1214, 1234, 1254, 1274, 12A4

Fixed

Product Codes 1224, 1244, 1264, 1284, 12B4

Fixed

Dummy Pair (for Non-Active Door)
Product Codes 1215, 1235, 1255, 1275, 12A5

Fixed

emtek.com 800.356.2741

Fixed

Product Codes 1225, 1245, 1265, 1285, 12B5

Fixed

Fixed

37

DOOR CONFIGURATION

#3
American Cylinder Hub Above Handle
41⁄8” Center-to-Center
ref. Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

Brass Concord

11⁄2” x 11” Keyed
Wembley Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1371

See Page 10 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 101⁄2” Non-Keyed
Rope Levers

1372
1373
1374
1375

List Price

$244.00

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1381
1382
1383
1384
1385

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
38

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.
Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Andersen®

DOOR CONFIGURATION #3

Brass Modern

Brass Modern

11⁄2” x 11” Keyed
R-Bar. Straight Knurled Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

13A1

See Page 10 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Helios Levers

13A2
13A3
13A4
13A5

List Price

$244.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

13B1
13B2
13B3
13B4
13B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

Stainless Steel

11⁄2” x 11” Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

13A1

2” x 10” Non-Keyed
Dresden Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

List Price

$244.00

13A2
13A3
13A4
13A5

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

13B1
13B2
13B3
13B4
13B5

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
39

DOOR CONFIGURATION

#3
American Cylinder Hub Above Handle
41⁄8” Center-to-Center
ref. Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

Sandcast Arched

11⁄2” x 11” Keyed
Durango Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1311

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Non-Keyed
Cody Levers

List Price

$272.00

1312
1313
1314
1315

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1321
1322
1323
1324
1325

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
40

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Andersen®

DOOR CONFIGURATION #3

Sandcast Rectangular

Sandcast Rectangular

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1351

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Montrose Levers

List Price

$272.00

1352
1353
1354
1355

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1361
1362
1363
1364
1365

Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Keyed
Medici Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Sets with 11⁄2” x 111⁄8” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1331

2” x 101⁄2” Non-Keyed
Padua Levers

Lever Style (LH/RH)

Finish

See Page 11 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$272.00

1332
1333
1334
1335

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1341
1342
1343
1344
1345

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
41

DOOR CONFIGURATION #3

Specification Sheet for Components and Door Thickness

Door Configuration #3 American Cylinder Above Handle 4 1/8" Center-to-Center
Cylinder Tailpiece
Includes Configuration #3
Special Mounting Hardware

Steel
Spindle

Rosette Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Configuration #3 Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Configuration #3 Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

42

Dimples drilled in plug
in this position

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #3

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Andersen®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1311, 1331, 1351, 1371, 13A1

Product Codes 1321, 1341, 1361, 1381, 13B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1312, 1332, 1352, 1372, 13A2

Product Codes 1322, 1342, 1362, 1382, 13B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
Product Codes 1313, 1333, 1353, 1373, 13A3

Product Codes 1323, 1343, 1363, 1383, 13B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Product Codes 1314, 1334, 1354, 1374, 13A4

Product Codes 1324, 1344, 1364, 1384, 13B4

Fixed

Fixed

Dummy Pair (for Non-Active Door)
Product Codes 1315, 1335, 1355, 1375, 13A5

Fixed

emtek.com 800.356.2741

Fixed

Product Codes 1325, 1345, 1365, 1385, 13B5

Fixed

Fixed

43

DOOR CONFIGURATION

#4
American Cylinder Hub Above Handle
35⁄8” Center-to-Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN®
Jeldwen® Custom Collection (formerly Pozzi®)
Marvin®, PGT®, Premium Collection (formerly Norco®)
Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.
See Configuration #1 for Marvin Integrity® Doors

Brass Concord

Brass Concord

11⁄2” x 11” Keyed
Coventry Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1471

See Page 10 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 101⁄2” Non-Keyed
Santa Fe Levers

1472
1473
1474
1475

List Price

$244.00

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1481
1482
1483
1484
1485

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
44

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.
Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield®

DOOR CONFIGURATION #4

Brass Modern

Brass Modern

11⁄2” x 11” Keyed
R-Bar. Straight Knurled Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

14A1

See Page 10 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Non-Keyed
Hercules Levers

14A2
14A3
14A4
14A5

List Price

$244.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

14B1
14B2
14B3
14B4
14B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

Stainless Steel

11⁄2” x 11” Keyed
Stuttgart Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

14A1

2” x 10” Non-Keyed
Hermes Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

List Price

$244.00

14A2
14A3
14A4
14A5

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

14B1
14B2
14B3
14B4
14B5

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
45

DOOR CONFIGURATION

#4
American Cylinder Hub Above Handle
35⁄8” Center-to-Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN®
Jeldwen® Custom Collection (formerly Pozzi®)
Marvin®, PGT®, Premium Collection (formerly Norco®)
Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.
See Configuration #1 for Marvin Integrity® Doors

Sandcast Arched

Sandcast Arched

11⁄2” x 11” Keyed
Montrose Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1411

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Non-Keyed
Cody Levers

List Price

$272.00

1412
1413
1414
1415

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1421
1422
1423
1424
1425

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
46

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield®

DOOR CONFIGURATION #4

Sandcast Rectangular

Sandcast Rectangular

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1451

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Teton Levers

List Price

$272.00

1452
1453
1454
1455

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1461
1462
1463
1464
1465

Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Non-Keyed
Napoli Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Sets with 11⁄2” x 111⁄8” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1431

2” x 101⁄2” Keyed
Napoli Levers

Lever Style (LH/RH)

Finish

See Page 11 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$272.00

1432
1433
1434
1435

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1441
1442
1443
1444
1445

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
47

DOOR CONFIGURATION #4

Specification Sheet for Components and Door Thickness

Door Configuration #4 American Cylinder Above Handle 3 5/8" Center-to-Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

48

Dimples drilled in plug
in this position

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #4

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1411, 1431, 1451, 1471, 14A1

Product Codes 1421, 1441, 1461, 1481, 14B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1412, 1432, 1452, 1472, 14A2

Product Codes 1422, 1442, 1462, 1482, 14B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
Product Codes 1413, 1433, 1453, 1473, 14A3

Product Codes 1423, 1443, 1463, 1483, 14B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Product Codes 1414, 1434, 1454, 1474, 14A4

Product Codes 1424, 1444, 1464, 1484, 14B4

Fixed

Fixed

Dummy Pair (for Non-Active Door)
Product Codes 1415, 1435, 1455, 1475, 14A5

Fixed

emtek.com 800.356.2741

Fixed

Product Codes 1425, 1445, 1465, 1485, 14B5

Fixed

Fixed

49

DOOR CONFIGURATION

#5
Euro Profile Cylinder Below Handle
35⁄8” Center-to-Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®
Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®
Semco®, Sierra Pacific®, Signature®, Simpson®
Therma-Tru®, Vetter®, Willmar®, Windsor®
Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

Brass Concord

11⁄2” x 11” Keyed
Turino Levers

BRASS PLATES, CONCORD STYLE

Product Code

Sets with 11⁄2” x 11” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1571

2” x 101⁄2” Keyed
Rustic Levers

Lever Style (LH/RH)

Finish

See Page 10 for Brass
& Modern Brass
Lever Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

1572
1573
1574
1575

List Price

$244.00

Sets with 2” x 101⁄2” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1581
1582
1583
1584
1585

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
50

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Weiser® keyway not available for Configuration 5, Euro cylinder.
To order: Product Code + Lever Style + Handing + Finish Code

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®
Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

DOOR CONFIGURATION #5

Brass Modern

Brass Modern

11⁄2” x 11” Keyed
Hermes Levers

BRASS PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
15A1

Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Triton Levers

Lever Style (LH/RH)

Finish

See Page 10 for Brass
& Modern Brass
Lever Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

15A2
15A3
15A4
15A5

List Price

$244.00

Sets with 2” x 10” Plates
15B1

Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

15B2
15B3
15B4
15B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

Stainless Steel

11⁄2” x 11” Keyed
Stuttgart Levers

STAINLESS STEEL PLATES, MODERN STYLE

2” x 10” Non-Keyed
Hercules Levers

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

15A1

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

List Price

$244.00

15A2
15A3
15A4
15A5

Sets with 2” x 10” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

15B1
15B2
15B3
15B4
15B5

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser® keyway not available for Configuration 5, Euro cylinder.
51

DOOR CONFIGURATION

#5
Euro Profile Cylinder Below Handle
35⁄8” Center-to-Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®
Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®
Semco®, Sierra Pacific®, Signature®, Simpson®
Therma-Tru®, Vetter®, Willmar®, Windsor®
Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

Sandcast Arched

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1511

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Durango Levers

List Price

$272.00

1512
1513
1514
1515

Sets with 2” x 10” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1521
1522
1523
1524
1525

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
52

Weiser® keyway not available for Configuration 5, Euro cylinder.
To order: Product Code + Lever Style + Handing + Finish Code

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®
Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

DOOR CONFIGURATION #5

Sandcast Rectangular

Sandcast Rectangular

11⁄2” x 11” Keyed
Teton Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1551

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Non-Keyed
Montrose Levers

List Price

$272.00

1552
1553
1554
1555

Sets with 2” x 10” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1561
1562
1563
1564
1565

Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Sets with 11⁄2” x 111⁄8” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1531

2” x 101⁄2” Keyed
Padua Levers

Lever Style (LH/RH)

Finish

See Page 11 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$272.00

1532
1533
1534
1535

Sets with 2” x 101⁄2” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1541
1542
1543
1544
1545

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser® keyway not available for Configuration 5, Euro cylinder.
53

DOOR CONFIGURATION #5
Door Configuration #5
Euro Profile Cylinder Below Handle
3 5/8" Center-to-Center

Specification Sheet for Components and Door Thickness
Full Euro Profile Cylinder

Half Euro Profile Cylinder

CY4-ERSGL25

CY4-ERHLF16TT

CY4-ERSGL32

CY4-ERHLF19TT

CY4-ERSGL35

CY4-ERHLF21TT

Full Euro Profile Cylinder

Steel
Spindle

Cylinder
Screw
Rosette
Screws

Keyed Plates with Euro Profile Cylinder
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 21/2”

Extended Door Thickness: Over 21/2”to 23/4”

Standard Components:
• 2 9/16” Euro Profile Cylinder
• 3 3/4” Steel Spindle
• 1 1/2” Rosette Screws

Extended Components:
• 3 5/32” Euro Profile Cylinder
• 4 1/2” Steel Spindle
• 2” Rosette Screws

Extended Components:
• 3 17/32” Euro Profile Cylinder
• 5” Steel Spindle
• 3” Rosette Screws

Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 21/2”

Extended Door Thickness: Over 21/2”to 23/4”

Standard Components:
• 1 21/32” Euro Profile Half-Cylinder
• 3 3/4” Steel Spindle
• 1 1/2” Rosette Screws

Extended Components:
• 1 31/32” Euro Profile Half-Cylinder
• 4 1/2” Steel Spindle
• 2” Rosette Screws

Extended Components:
• 2 5/32” Euro Profile Half-Cylinder
• 5” Steel Spindle
• 3” Rosette Screws

Non-Keyed Plates with Euro Profile Half Cylinder

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks

54

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #5

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®,
Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)
Product Codes 1511, 1531, 1551, 1571, 15A1

Plates, Product Codes 1521, 1541, 1561, 1581, 15B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1512, 1532, 1552, 1572, 15A2

Product Codes 1522, 1542, 1562, 1582, 15B2

Non-Keyed, Euro Profile Style Thumbturn Inside (for Active Door)
Product Codes 1513, 1533, 1553, 1573, 15A3

Product Codes 1523, 1543, 1563, 1583, 15B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Product Codes 1514, 1534, 1554, 1574, 15A4

Product Codes 1524, 1544, 1564, 1584, 15B4

Fixed

Fixed

Dummy Pair (for Non-Active Door)
Product Codes 1515, 1535, 1555, 1575, 15A5

Fixed

emtek.com 800.356.2741

Fixed

Product Codes 1525, 1545, 1565, 1585, 15B5

Fixed

Fixed

55

DOOR CONFIGURATION

#6
American Cylinder Hub Below Handle
35⁄8” Center-to-Center
ref. Milgard®, Pella®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

Brass Concord

11⁄2” x 11” Keyed
Cortina Levers

BRASS PLATES, CONCORD STYLE

Product Code

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1671

2” x 101⁄2” Non-Keyed
Santa Fe Levers

Lever Style (LH/RH)

Finish

See Page 10 for Brass
& Modern Brass
Lever Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

1672
1673
1674
1675

List Price

$244.00

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1681
1682
1683
1684
1685

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
56

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.
Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Milgard®, Pella®

DOOR CONFIGURATION #6

Brass Modern

Brass Modern

11⁄2” x 11” Non-Keyed
Hercules Levers

BRASS PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

16A1

2” x 10” Non-Keyed
Luzern Levers

Lever Style (LH/RH)

Finish

See Page 10 for Brass
& Modern Brass
Lever Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

16A2
16A3
16A4
16A5

List Price

$244.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

16B1
16B2
16B3
16B4
16B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

Stainless Steel

11⁄2” x 11” Non-Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

16A1

2” x 10” Non-Keyed
Hercules Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

List Price

$244.00

16A2
16A3
16A4
16A5

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

16B1
16B2
16B3
16B4
16B5

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
57

DOOR CONFIGURATION

#6
American Cylinder Hub Below Handle
35⁄8” Center-to-Center
ref. Milgard®, Pella®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

Sandcast Arched

11⁄2” x 11” Non-Keyed
Teton Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1611

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Durango Levers

List Price

$272.00

1612
1613
1614
1615

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1621
1622
1623
1624
1625

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
58

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Milgard®, Pella®

DOOR CONFIGURATION #6

Sandcast Rectangular

Sandcast Rectangular

11⁄2” x 11” Non-Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1651

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Montrose Levers

List Price

$272.00

1652
1653
1654
1655

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1661
1662
1663
1664
1665
Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Sets with 11⁄2” x 111⁄8” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1631

2” x 101⁄2” Non-Keyed
Napoli Levers

Lever Style (LH/RH)

Finish

See Page 11 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$272.00

1632
1633
1634
1635

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1641
1642
1643
1644
1645

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
59

DOOR CONFIGURATION #6

Specification Sheet for Components and Door Thickness

Door Configuration #6 American Cylinder Below Handle 3 5/8" Center-to-Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

60

Dimples drilled in plug
in this position

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #6

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Milgard®, Pella®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1611, 1631, 1651, 1671, 16A1

Product Codes 1621, 1641, 1661, 1681, 16B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1612, 1632, 1652, 1672, 16A2

Product Codes 1622, 1642, 1662, 1682, 16B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
Product Codes 1613, 1633, 1653, 1673, 16A3

Product Codes 1623, 1643, 1663, 1683, 16B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Product Codes 1614, 1634, 1654, 1674, 16A4

Product Codes 1624, 1644, 1664, 1684, 16B4

Fixed

Fixed

Dummy Pair (for Non-Active Door)
Product Codes 1615, 1635, 1655, 1675, 16A5

Fixed

emtek.com 800.356.2741

Fixed

Product Codes 1625, 1645, 1665, 1685, 16B5

Fixed

Fixed

61

DOOR CONFIGURATION

#7
American Cylinder Hub Above Handle
6” Center-to-Center
ref. Trillenium® (formerly W&F Manufacturing)

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Modern

Brass Modern

2” x 10” Keyed
Poseidon Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

List Price

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Polished Nickel - Lifetime (US14)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

$244.00

17B1

See Page 10 for
Brass & Modern
Brass Lever
Options.

METRIC
KNOB
Sets
with
2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

2” x 10” Non-Keyed
Hercules Levers

17B3

Dummy Pair

17B5

Non-Keyed American Style T-Turn Inside, Fixed Handles

17B6

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
62

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Trillenium® (formerly W&F Manufacturing)

DOOR CONFIGURATION #7

Stainless Steel

Stainless Steel

2” x 10” Keyed
Stuttgart Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

17B1

2” x 10” Non-Keyed
Hercules Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

17B5

Non-Keyed American Style T-Turn Inside, Fixed Handles

17B6

Sandcast Rectangular

Sandcast Rectangular

2” x 10” Keyed
Lariat Levers

Product Code

METRIC
KNOB
Sets
with
2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

1761

2” x 10” Non-Keyed
Lariat Levers

Lever Style (LH/RH)

Finish

1765

Non-Keyed American Style T-Turn Inside, Fixed Handles

1766

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sandcast Arched

Product Code

METRIC
KNOB
Sets
with
2” x 10” Plates
1721

2” x 10” Non-Keyed
Cody Levers

Lever Style (LH/RH)

Finish

See Page 11 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

List Price

$272.00

1723

Dummy Pair

1725

Non-Keyed American Style T-Turn Inside, Fixed Handles

1726

emtek.com 800.356.2741

$272.00

Sandcast Arched

2” x 10” Keyed
Montrose Levers

Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

List Price

1763

Dummy Pair

SANDCAST BRONZE PLATES, ARCHED STYLE

$244.00

17B3

Dummy Pair

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

List Price

63

DOOR CONFIGURATION

#7
American Cylinder Hub Above Handle
6” Center-to-Center
ref. Trillenium® (formerly W&F Manufacturing)

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Bronze Tuscany

Bronze Tuscany

2” x 101⁄2” Keyed
Padua Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Lever Style (LH/RH)

Finish

1741

See Page 11 for
Lost Wax Cast
Bronze Lever
Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

METRIC
KNOB
Sets
with
2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

2” x 101⁄2” Non-Keyed
Napoli Levers

$272.00

1743

Dummy Pair

1745

Non-Keyed American Style T-Turn Inside, Fixed Handles

1746

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
64

List Price

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Trillenium® (formerly W&F Manufacturing)

DOOR CONFIGURATION #7

Door Configuration #7 American Cylinder Above Handle 6" Center-to-Center
Cylinder Tailpiece

Steel Spindles
(Half-Spindle)

Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 2” Steel Spindles (Half-spindle)
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 2” Steel Spindles (Half-spindle)
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

emtek.com 800.356.2741

Dimples drilled in plug
in this position

65

DOOR CONFIGURATION #7

Specification Sheet for Components and Door Thickness

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Trillenium® (formerly W&F Manufacturing)

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1721, 1741,1761, 17B1

Non-Keyed, American Style T-Turn Inside (Active Door)
Product Codes 1723, 1743, 1763, 17B3

Dummy Pair (for Non-Active Door)
Product Codes 1725, 1745, 1765, 17B5

Non-Keyed, Fixed Handles, American Style T-Turn Inside (for Semi-Active Door)
Product Codes 1726, 1746, 1766, 17B6

66

Decorative Multi Point Lock Trim for Swinging Patio Doors

DOOR CONFIGURATION

#8
1 5/8"

American Cylinder Hub Above Handle
51/4” Center to Center

5 1/4"

ref. Neuma Doors®

8 7/8"

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Stainless Steel

Stainless Steel

11⁄2” x 11” Non-Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

18A1

2” x 10” Keyed
Dresden Levers

Lever Style (LH/RH)

Finish

List Price

See Page 11 for
Stainless Steel
Lever Options.

Brushed Stainless Steel (SS)

$244.00

18A2
18A3
18A4

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

18B1
18B2
18B3
18B4

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
67

DOOR CONFIGURATION

#8
1 5/8"

American Cylinder Hub Above Handle
51/4” Center to Center

5 1/4"

ref. Neuma Doors®

8 7/8"

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Rectangular

Sandcast Rectangular

11⁄2” x 11” Non-Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

List Price

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

$272.00

1851

See Page 11 for
Sandcast Bronze
Lever Options.

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

2” x 10” Keyed
Teton Levers

1852
1853
1854

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

1861
1862
1863
1864

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
68

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Neuma Door®

DOOR CONFIGURATION #8

Sandcast Arched

Sandcast Arched

11⁄2” x 11” Non-Keyed
Cimarron Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

List Price

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

$272.00

1811

See Page 11 for
Sandcast Bronze
Lever Options.

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

2” x 10” Keyed
Durango Levers

1812
1813
1814

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

1821
1822
1823
1824

Bronze Tuscany

Bronze Tuscany

11⁄2” x 111⁄8” Non-Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Lever Style (LH/RH)

Finish

List Price

Flat Black Bronze (FB)
Medium Bronze (MB)

$272.00

1831

See Page 11 for
Lost Wax Cast
Bronze Lever
Options.

Sets with 11⁄2” x 111⁄8” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

2” x 101⁄2” Keyed
Medici Levers

1832
1833
1834

Sets with 2” x 101⁄2” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside

1841
1842
1843
1844

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
emtek.com 800.356.2741

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
69

DOOR CONFIGURATION #8

Specification Sheet for Components and Door Thickness

Door Configuration #8 American Cylinder Above Handle 5 1/4” Center to Center
Cylinder Tailpiece

1 5/8"

5 1/4"

Steel
Spindle

8 7/8"

Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Charge for Re-Keying - $2.00 (NET) per cylinder
• Keying to Code
- Order by indicating “Key Code XXXXX “ next to applicable locks
• Keying Alike
- Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted
- If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks
Charge for Construction Keying - $3.00 (NET) per cylinder
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder
• Lost ball system
• Last four pin locations drilled for lost ball application
• Master key pins used for code variability
• Construction keys and owner keys sent separately
• Order by indicating “Construction Keyed, House #_” next to applicable locks
Construction devices used on one or
more of last four positions

70

Dimples drilled in plug
in this position

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #8

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Neuma Doors®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Product Codes 1811, 1831, 1851, 18A1

Product Codes 1821, 1841, 1861, 18B1

Non-Keyed, Passage (for Semi-Active Door)
Product Codes 1812, 1832, 1852, 18A2

Product Codes 1822, 1842, 1862, 18B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
Product Codes 1813, 1833, 1853, 18A3

Product Codes 1823, 1843, 1863, 18B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Product Codes 1814, 1834, 1854, 18A4

Fixed

emtek.com 800.356.2741

Product Codes 1824, 1844, 1864, 18B4

Fixed

71

PRODUCT INDEX

72

PRODUCT
CODE

PAGE

PRODUCT
CODE

PAGE

PRODUCT
CODE

PAGE

PRODUCT
CODE

PAGE

1L1A11
1L1A12
1L1A13
1L1A14
1L1A15
1L1A21
1L1A22
1L1A23
1L1A24
1L1A25
1L1A51
1L1A52
1L1A53
1L1A54
1L1A55
1L1M11
1L1M12
1L1M13
1L1M14
1L1M15
1L1M21
1L1M22
1L1M23
1L1M24
1L1M25
1L1M51
1L1M52
1L1M53
1L1M54
1L1M55
1L1R11
1L1R12
1L1R13
1L1R14
1L1R15
1L1R21
1L1R22
1L1R23
1L1R24
1L1R25
1L1R51
1L1R52
1L1R53
1L1R54
1L1R55
11A1		
11A2		
11A3		
11A4		
11A5		
11B1		

18
18
18
18
18
18
18
18
18
18
23
23
23
23
23
17
17
17
17
17
17
17
17
17
17
22
22
22
22
22
16
16
16
16
16
16
16
16
16
16
21
21
21
21
21
27, 31
27, 31
27, 31
27, 31
27, 31
27, 31

11B2		
11B3		
11B4		
11B5		
12A1		
12A2		
12A3		
12A4		
12A5		
12B1		
12B2		
12B3		
12B4		
12B5		
13A1		
13A2		
13A3		
13A4		
13A5		
13B1		
13B2		
13B3		
13B4		
13B5		
14A1		
14A2		
14A3		
14A4		
14A5		
14B1		
14B2		
14B3		
14B4		
14B5		
15A1		
15A2		
15A3		
15A4		
15A5		
15B1		
15B2		
15B3		
15B4		
15B5		
16A1		
16A2		
16A3		
16A4		
16A5		
16B1		
16B2		

27, 31
27, 31
27, 31
27, 31
33, 37
33, 37
33, 37
33, 37
33, 37
33, 37
33, 37
33, 37
33, 37
33, 37
39, 43
39, 43
39, 43
39, 43
39, 43
39, 43
39, 43
39, 43
39, 43
39, 43
45, 49
45, 49
45, 49
45, 49
45, 49
45, 49
45, 49
45, 49
45, 49
45, 49
51, 55
51, 55
51, 55
51, 55
51, 55
51, 55
51, 55
51, 55
51, 55
51, 55
57, 61
57, 61
57, 61
57, 61
57, 61
57, 61
57, 61

16B3		
16B4		
16B5		
17B1		
17B3		
17B5		
17B6		
18A1		
18A2		
18A3		
18A4		
18B1		
18B2		
18B3		
18B4		
1111		
1112		
1113		
1114		
1115		
1121		
1122		
1123		
1124		
1125		
1131		
1132		
1133		
1134		
1135		
1141		
1142		
1143		
1144		
1145		
1151		
1152		
1153		
1154		
1155		
1161		
1162		
1163		
1164		
1165		
1171		
1172		
1173		
1174		
1175		
1181		

57, 61
57, 61
57, 61
62, 63, 66
62, 63, 66
62, 63, 66
62, 63, 66
67, 71
67, 71
67, 71
67, 71
67, 71
67, 71
67, 71
67, 71
28, 31
28, 31
28, 31
28, 31
28, 31
28, 31
28, 31
28, 31
28, 31
28, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
29, 31
26, 31
26, 31
26, 31
26, 31
26, 31
26, 31

1182		
1183		
1184		
1185		
1211		
1212		
1213		
1214		
1215		
1221		
1222		
1223		
1224		
1225		
1231		
1232		
1233		
1234		
1235		
1241		
1242		
1243		
1244		
1245		
1251		
1252		
1253		
1254		
1255		
1261		
1262		
1263		
1264		
1265		
1271		
1272		
1273		
1274		
1275		
1281		
1282		
1283		
1284		
1285		
1311		
1312		
1313		
1314		
1315		
1321		
1322		

26, 31
26, 31
26, 31
26, 31
34, 37
34, 37
34, 37
34, 37
34, 37
34, 37
34, 37
34, 37
34, 37
34, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
35, 37
32, 37
32, 37
32, 37
32, 37
32, 37
32, 37
32, 37
32, 37
32, 37
32, 37
40, 43
40, 43
40, 43
40, 43
40, 43
40, 43
40, 43

PRODUCT INDEX
PRODUCT
CODE

PAGE

PRODUCT
CODE

PAGE

PRODUCT
CODE

PAGE

1323		
1324		
1325		
1331		
1332		
1333		
1334		
1335		
1341		
1342		
1343		
1344		
1345		
1351		
1352		
1353		
1354		
1355		
1361		
1362		
1363		
1364		
1365		
1371		
1372		
1373		
1374		
1375		
1381		
1382		
1383		
1384		
1385		
1411		
1412		
1413		
1414		
1415		
1421		
1422		
1423		
1424		
1425		
1431		
1432		
1433		
1434		
1435		
1441		
1442		
1443		

40, 43
40, 43
40, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
41, 43
38, 43
38, 43
38, 43
38, 43
38, 43
38, 43
38, 43
38, 43
38, 43
38, 43
46, 49
46, 49
46, 49
46, 49
46, 49
46, 49
46, 49
46, 49
46, 49
46, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49

1444		
1445		
1451		
1452		
1453		
1454		
1455		
1461		
1462		
1463		
1464		
1465		
1471		
1472		
1473		
1474		
1475		
1481		
1482		
1483		
1484		
1485		
1511		
1512		
1513		
1514		
1515		
1521		
1522		
1523		
1524		
1525		
1531		
1532		
1533		
1534		
1535		
1541		
1542		
1543		
1544		
1545		
1551		
1552		
1553		
1554		
1555		
1561		
1562		
1563		
1564		

47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
47, 49
44, 49
44, 49
44, 49
44, 49
44, 49
44, 49
44, 49
44, 49
44, 49
44, 49
52, 55
52, 55
52, 55
52, 55
52, 55
52, 55
52, 55
52, 55
52, 55
52, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55
53, 55

1565		
1571		
1572		
1573		
1574		
1575		
1581		
1582		
1583		
1584		
1585		
1611		
1612		
1613		
1614		
1615		
1621		
1622		
1623		
1624		
1625		
1631		
1632		
1633		
1634		
1635		
1641		
1642		
1643		
1644		
1645		
1651		
1652		
1653		
1654		
1655		
1661		
1662		
1663		
1664		
1665		
1671		
1672		
1673		
1674		
1675		
1681		
1682		
1683		
1684		
1685		

53, 55
50, 55
50, 55
50, 55
50, 55
50, 55
50, 55
50, 55
50, 55
50, 55
50, 55
58, 61
58, 61
58, 61
58, 61
58, 61
58, 61
58, 61
58, 61
58, 61
58, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
59, 61
56, 61
56, 61
56, 61
56, 61
56, 61
56, 61
56, 61
56, 61
56, 61
56, 61

PRODUCT
CODE

PAGE

1721		
1723		
1725		
1726		
1741		
1743		
1745		
1746		
1761		
1763		
1765		
1766		
1811		
1812		
1813		
1814		
1821		
1822		
1823		
1824		
1831		
1832		
1833		
1834		
1841		
1842		
1843		
1844		
1851		
1852		
1853		
1854		
1861		
1862		
1863		
1864		

63, 66
63, 66
63, 66
63, 66
64, 66
64, 66
64, 66
64, 66
63, 66
63, 66
63, 66
63, 66
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
69, 71
68, 71
68, 71
68, 71
68, 71
68, 71
68, 71
68, 71
68, 71

73

Multi Point Lock Trim Order Form

Acct#

Order Placed By

Date

Billing Information

Shipping Address

Company Name

Company Name

Address

Address

City

State, Zip

Telephone

State, Zip

Telephone

PO#

QTY

City

Note

Configuration

EMTEK Products, Inc.
15250 E Stafford Street
City of Industry, CA 91744
Tel: 800-356-2741 626-961-0413
Fax: 800-577-5771 626-336-2812
www.emtek.com

Product Code

Lever Style

Handing
(LH/RH)

Finish

Price

Please Fax Order Form to (800) 577-5771
or Email to orders@emtek.com

LIFETIME LIMITED WARRANTY
Subject to the terms and conditions of this warranty, Emtek Products, Inc. (“Company”) extends a lifetime limited warranty* to the
original consumer user (“Original User”) of our product (“Product”) against defects in material and workmanship, as long as the Original User
occupies the residential premises upon which the Product was originally installed.
*Electronic components warranted TWO (2) YEARS

This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on
or after April 2, 2012.
Original User: The Original User will return the defective Product to the retailer from whom it was purchased, accompanied by a statement
of defects and proof of purchase.
What Emtek will do: Upon return of the defective Product to Emtek for inspection, free and clear of all liens and encumbrances and
accompanied by the statement of defects and proof of purchase, Emtek’s sole obligation, at its option, is to either repair or replace the Product,
or refund the original retailer purchase price in exchange for the Product.
THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.
THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE
ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT
INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion
or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific
legal rights and a buyer may also have other rights which may vary from state to state.
WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED
WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II)
SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.
THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA
APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO
ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED;
(VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO
IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK’S EXAMINATION, DO NOT
DISCLOSE TO EMTEK’S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches,
abrasions, or deterioration due to the use of paints, solvents or other chemicals.
Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish
warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and
Unlacquered Brass finishes. All other finishes carry a five year finish warranty.
Warranty claims: Please contact the retailer from whom the defective product was purchased. If assistance is needed, please contact Emtek
Customer Service at:
EMTEK Products, Inc.
Tel: (626) 961-0413

EMTEK Products, Inc.
Tel: 800-356-2741 • 626-961-0413
Fax: 800-577-5771 • 626-336-2812
emtek.com

BX4-3PTPRICEBK-2021

Effective Februar y 1, 2021



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2020:11:15 11:13:27-08:00
Creator                         : Adobe InDesign 15.1 (Macintosh)
Modify Date                     : 2020:12:17 12:59:15-08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c017 91.164464, 2020/06/15-10:20:05
Metadata Date                   : 2020:12:17 12:59:15-08:00
Creator Tool                    : Adobe InDesign 15.1 (Macintosh)
Instance ID                     : uuid:53f0570d-24ee-6741-a7c4-3949aa73b842
Original Document ID            : xmp.did:67373099-a68c-48ea-8833-030dd908acfa
Document ID                     : xmp.id:c4f4b7a8-e4b2-4a21-a90f-462ace8d5b6d
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:584b14d4-15b4-485a-9be4-9319b43de3bc
Derived From Document ID        : xmp.did:5a86c21b-dc52-4498-ba4a-efc7ee2ce76c
Derived From Original Document ID: xmp.did:67373099-a68c-48ea-8833-030dd908acfa
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign 15.1 (Macintosh)
History Changed                 : /
History When                    : 2020:11:15 11:13:27-08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Slug Family                     : Myriad Pro
Slug Version                    : 2.115
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 1830684347
Slug Post Script Name           : MyriadPro-BoldCond
Slug Font Sense 12 Checksum     : 1830684347
Page Count                      : 76

EXIF Metadata provided by EXIF.tools