EnGenius Technologies EAP1750H Dual Band AC1750 Access Point User Manual

EnGenius Technologies Dual Band AC1750 Access Point

User Manual.pdf

User ManualBusiness SolutionsDual Band N1750 Indoor Access PointCeiling Mount DesignEAP1750Hversion 1.0
2IMPORTANTTo install this Access Point please refer to the Quick Installation Guide included in the product packaging.
3Chapter 1 Product Overview................................................... 4 Key Features/Introduction........................................................... 5 System Requirements / Package Contents .............................. 6 Applications...................................................................................... 7 TechnicalSpecications...............................................................8 Physical Interface........................................................................... 9Chapter 2 Before You Begin .................................................. 10 Considerations for Wireless Installation............................. 11 Computer Settings..................................................................... 12 Hardware Installation................................................................. 15 Mounting the EAP1750H............................................................. 16Chapter 3 Conguring Your Access Point.......................... 18 Default Settings............................................................................ 19Chapter 4 Building a Wireless Network............................. 20 Access Point Mode....................................................................... 21 WDS AP Mode............................................................................... 22 WDS Bridge Mode........................................................................ 23Chapter 5 Overview............................................................... 24 Overview........................................................................................... 25 Connections.................................................................................... 26Chapter 6 Network ................................................................. 27 OperationMode/Basic...................................................................28 IP Settings/SpanningTree Settings...................................... 29Chapter 7 Wireless ............................................................... 31 Wireless Network........................................................................ 31 Wireless Security......................................................................... 34 Wireless MAC Filtering............................................................ 40 Wireless Advanced ..................................................................... 41 WPS (Wi-Fi Protected Setup)................................................. 42 WDS Link Settings....................................................................... 43Chapter 8 Management........................................................ 44 Administration.............................................................................. 45 Management VLAN Settings................................................. 46 Wireless Trafc Shaping......................................................... 47 SNMPSettings...............................................................................48 Backup/Restore.......................................................................... 50 Auto Reboot Settings................................................................ 51 Firmware Upgrade/Time Settings............................................ 52 System Log/Tools.......................................................................... 54 Ping Test Parameters/Traceroute Parameters.................. 55 Speed Test Parameters/LED Control.........................................56 Device Display/Reset...................................................................57Appendix ................................................................................. 58 FCC Interference Statement.................................................. 59 IC Interference Statement.................................................... 60 CE Interference Statement...................................................... 62Table of Contents
4Chapter 1 Product Overview
5Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2013 EnGenius Technologies, Inc. All rights reserved.Key Features• High transmit power, enabling long range connectivity• SupportsIEEE802.11ac/b/g/nwirelessstandardswithupto450 Mbps data rate on 2.4GHz and 1300Mbps data rate on 5GHz• Six internal 5dBi Omni-Directional MIMO antennas• Can be monitored after deployment with EnGenius EZ Controller™ software for Windows (Free online download)• Can be used with included power adapter or via PoE with PoE  802.3at-capableSwitchesorInjectors• Dual Band/Three Stream• Band Steering shifts dual band clients to 5 GHz for better throughput performance• Secured Guest NetworkIntroduction The EAP1750H is a high-powered, long-range, Dual-band concurrent Wireless 802.11ac/b/g/n Access Point withthree major functional modes. It is designed to operatein numerous environments; from large homes, small and medium-sized businesses, multiple-oor ofces, hotels,and other venues, to larger enterprise deployments. Its high-powered, long-range characteristics make it a cost-Introductioncan be used with802.3atcapable switches or injectorseffective alternative to ordinary Access Points that don’t have the range and reach to connect to a growing number of wireless users who wish to connect to a large home or business network.
6The EAP1750H supports the 2.4 GHz frequency band under the802.11b/g/nmodewhileatthesametimeprovidinga5GHzbandforcommunicatingortransferringlesinalesscongested network frequency band.The EAP1750H also delivers up to 15x faster wireless speeds compared to legacy 802.11a/b/g wireless devices. Eventhough the EAP1750H has been designed and engineered for heavy trafc and demanding business environments,inlargerhousingenvironmentsasitcanefcientlyextendthe wireless range of an existing home router. This makes it especially ideal in architecturally-challenging structures, providing whole home connectivity.To protect sensitive data during wireless transmissions, the EAP1750H offers different encryption settings for wireless transmissions, including industry standard WPA and WPA2 encryption. The EAP1750H also includes MAC addresslteringtoallownetworkadministratorstooffernetwork access only to known computers and other devices based on their MAC addresses.System RequirementsThe following are the Minimum System Requirements in ordercongurethedevice: • Computer with an Ethernet interface or wireless network capability • WindowsOS(XP,Vista,7,8),MacOS,orLinux-basedoperating systems • Web-BrowsingApplication(i.e.:InternetExplorer,Firefox,  Chrome, Safari, or another similar browser application)Package ContentsThe EAP1750H package contains the following items (all itemsmustbeinpackagetoissuearefund): • EAP1750H Access Point • Power Adapter • RJ-45 Ethernet Cable • Quick Installation Guide • Ceiling and Wall Mount Screw kit
7ApplicationsWireless LAN (WLAN) products are easy to install and highlyefcient.Thefollowinglistdescribessomeofthemany applications made possible through the power and exibilityofWLANs:• Difcult-to-Wire Environments: There are many situations where wires cannot be installed, deployed easily, or cannot be hidden from view. Older buildings, sites with multiple buildings, and/or areas that make the installation of a Ethernet-based LAN impossible, impractical or expensive are sites where WLAN can be a network solution.• Temporary Workgroups: Create temporary workgroups/networks in more open areas within a building; auditoriums, amphitheaters classrooms, ballrooms, arenas, exhibition centers, or temporary ofceswhereonewantseitherapermanentortemporaryWirelessLAN established.• The Ability to Access Real-Time Information: Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can access real-time information while dealing with patients, serving customers, and/or processing information.• Frequently Changing Environments: Set up networks in environments that change frequently (i.e.: Show Rooms,Exhibits, etc.).• Small Ofce and Home Ofce (SOHO) Networks: SOHO users require a cost-effective, easy, and quick installation of a small network.• Wireless Extensions to Existing Ethernet-based Networks: Devices like the EAP1750H enable network administrators, installers, and end-users to extend the range and reach of an existing Ethernet-based network.• Training/Educational Facilities: Training sites at corporations or students at universities use wireless connectivity to exchange information between peers and easily access information for learning purposes.
8SecurityWEP(64/128bit)WPA/WPA2 (TKIP/AES)Hidden ESSIDMACaddressltering,upto50eldsL2 Isolation802.1XAuthenticator(MD5/TLS/TTLS/PEAP)Guest NetworkQoS (Quality of Service)WMM (Wireless Multimedia)Physical/Environment ConditionsOperating: Temperature:32°Fto104°F(0°Cto40°C) Humidity(Non-condensing):90%orlessStorage: Temperature:-4°Fto140°F(-20°Cto60°C) Humidity(Non-condensing):90%orlessStandard:IEEE802.11b/g/non2.4GHzIEEE802.11ac/a/non5GHzIEEE802.3atAntennaSix Internal 5 dBi Omni-Directional AntennasPhysical Interface1 x 10/100/1000 Gigabit Ethernet Port1 x Reset Button1 x Power ConnectorLED IndicatorPowerWPSWLAN (Wireless Connection)LANPower RequirementsExternal Power AdapterDC IN, 12V/2AOperation ModesAccess PointWDS APWDS BridgeTechnical Specications
9Physical InterfaceDimensions and WeightsDiameter:6.36”Height:2.17” 1 Reset Button: Press and hold for over 10 seconds to reset to factory default settings. 2 LED Indicators: LED lights for WPS, WLAN 5G, WLAN 2.4G, Ethernet port, and Power 3 LAN Port (802.3at PoE): Ethernet port for RJ-45 cable. 4 Power Connector: 12V DC IN for Power. 5 Ceiling (Wall) Mount Hole: Using the provided hardware, the EAP1750H can be attached to a ceiling or wall. 6 Kensington Security Slot: To protect your EAP1750H, use the Kensington Security Slot to attach a cable lock. 3 41 256
10Chapter 2 Before You Begin
11This section will guide you through the installation process. Placement of the EnGenius EAP1750H is essential to maximize the Access Point’s performance. Avoid placing the EAP1750H in an enclosed space such as a closet, cabinet, or stairwell.Considerations for Wireless InstallationThe operating distance of all wireless devices can often not be pre-determined due to a number of unknown obstacles in the environment in which the device is deployed. Obstacles such as the number, thickness, andlocationofwalls,ceilings,orotherobjectsthattheEAP1750H’s wireless signals must pass through can weaken the signal. Here are some key guidelines for allowing the EAP1750H to have an optimal wireless range during setup.• Keep the number of walls and/or ceilings between the EAP1750H and other network devices to a minimum. Each wall and/or ceiling can reduce the signal strength, resulting in a lower overall signal strength.• Building materials make a difference. A solid metal door and/or aluminum stubs may have a signicant negative effect on thesignal strength of the EAP1750H. Locate your wireless devices carefully so the signal can pass through drywall and/or open doorways. Materials such as glass, steel, metal, concrete, water (example:shtanks),mirrors,lecabinets,and/orbrickcanalsodiminish wireless signal strength.• Interference from your other electrical devices and/or appliances that generate RF noise can also diminish the EAP1750H’s signal strength. The most common types of devices are microwaves or cordless phones.Before You Begin
12Windows XP/Windows 7InordertousetheEAP1750H,youmustrstconguretheTCP/IPv4 connection of your Windows OS computer system. 1. Click the Start button and open the Control Panel.2a. In Windows XP, click on Network Connections. 2b. In Windows 7, click View Network Status and Tasks in the Network and Internet section, then select Change Adapter Settings. 3. Right click on Local Area Connection and select Properties.Computer SettingsWindows XP Windows 7
134. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.5. Select Use the following IP address and enter an IP address that is different from the EAP1750H and Subnet mask, then click OK.Note: Ensure that the IP address and Subnet mask are on the same subnet as the device.Forexample:EAP1750HIPaddress:192.168.1.1 PCIPaddress:192.168.1.2–192.168.1.255 PCSubnetmask:255.255.255.0
14Apple Mac OS X1. Go to System Preferences (it can be opened in the Applications folder or by electing it in the Apple Menu).2. Select Network in the Internet & Network section.3. Highlight Ethernet.4. In Congure IPv4, select Manually.5. Enter an IP address that is different from the EAP1750H and Subnet mask, then click OK.Note: Ensure that the IP address and Subnet mask are on the same subnet as the device.Forexample:EAP1750HIPaddress:192.168.1.1 PCIPaddress:192.168.1.2–192.168.1.255 PCSubnetmask:255.255.255.06. Click Applywhennished.
151. Ensure that the computer in use has an Ethernet Controller port (RJ-45 Ethernet Port). For more information, verify with your computer’s user manual.2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the EAP1750H and the other end to the RJ-45 port of the computer. Ensure that the cable is securely connected to both the EAP1750H and the computer.3. Connect the Power Adapter DC connector to the DC-IN port of the EAP1750H and the Power Adapter to an available electrical outlet. Once both connections are secure,verifythefollowing: a) Ensure that the POWER light is on (it will be orange). b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will be blue for 2.4G, and green for 5G). c) Ensure that the LAN (Computer/EAP1750H Connection) light is on (it will be blue). d) Once all three lights are on, proceed to set up the Access Point using the computer.Thisdiagramdepictsthehardwareconguration.Hardware InstallationEthernetPCPowerOutletAC/DC Cable
16Using the provided hardware, the EAP1750H can be attached to a ceiling or wall.To attach the EAP1750H to a ceiling or wall using the mounting bracket:1. Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit.2. Insert the provided short screws into the bottom cover of the EAP1750H. Leave enough of the screws exposed to ensure that the unit can be attached to the mounting bracket.If extra space is required, use the provided spacers and long screws from the T-Rail mounting hardware kit to increase the space between the unit and the mounting bracket.3. Mount the EAP1750H on the mounting bracket by rotating the unit clockwise about 90 degrees to secure it in place.Mounting the EAP1750HWallMounting ScrewLock the EAP1750H by revolvingMounting BracketP2.6*12 ScrewP3.5*32 Screw
17Attaching the EAP1750H to a ceiling using the provided T-Rail connectors:1. Attach the T-Rail connectors to the bottom cover of the EAP1750H using the provided short screws.Note: Two sizes of T-Rail connectors are included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in(1.43cm). If extra space is required to accommodate drop ceiling tiles, use the provided spacers and long screws. 2. Line up the connected T-Rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps into place.Note: To protect your EAP1750H, use the Kensington Security Slot to attach a cable lock (cable lock is not included).P2.6*10 ScrewClipT-RailClip ClipsSpacerP2.6*25 Screw
18Chapter 3 Conguring Your Access Point
19This section will show you how to congure the deviceusingtheweb-basedcongurationinterface.Default SettingsPlease use your Ethernet port or wireless network adapter to connect the Access Point.IP Address 192.168.1.1Username/Password admin/admin Web Conguration1. Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address http://192.168.1.1.Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct IP Address.2. Thedefaultusernameandpasswordare:admin. Once you have entered the correct username and password, click the Login button to open the web-based congurationpage.3. If successful, you will be logged in and see the EAP1750H User Menu.Conguring Your Access Point
20Chapter 4 Building a Wireless Network
21 The EAP1750H has the ability to operate in various modes. This chapter describes the operating modes of the EAP1750H.Access Point ModeInAccessPointMode,theEAP1750HbehaveslikeacentralconnectionforstationsorclientsthatsupportIEEE802.11a/b/g/nnetworks.ThestationsandclientsmustbeconguredtousethesameSSID(ServiceSetIdentier)andsecuritypasswordtoassociatewiththeEAP1750H.TheEAP1750Hsupportsuptoeight(8)SSIDsperband(16total)atthesametimeforsecureaccess. EAP 900HAP/APClientClientClient ClientClientClient2.4 GHz 5 GHz
22 WDS AP ModeThe EAP1750H also supports WDS AP mode. This operating mode allows wireless connections to the EAP1750H using WDStechnology.Inthismode,conguretheMACaddressesinbothAccessPointstoenlargethewirelessareabyenablingWDS Link settings. WDS supports up to four (4) AP MAC addresses.EAP1750HWDS APEAP1750HWDS AP2.4 GHz 2.4 GHz5 GHz 5 GHzClientClient ClientClientClientComputerClientComputer
23WDS Bridge ModeInWDSBridgeMode,theEAP1750HcanwirelesslyconnectdifferentLANsbyconguringtheMACaddressandsecuritysettings of each EAP1750H device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to use the EAP1750H to wirelessly connect two wired LANs, as shown in the following gure.WDS Bridge Mode can establish up to four (4) WDS links, creating a star-like network. Note: WDS Bridge Mode does not act as an Access Point because Access Points linked by WDS use the same frequency channel.MoreAccessPointsconnectedtogethermaylowerthroughput.Thiscongurationcanalsobesusceptibleto generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to preventthisfromhappening.YoucanndinformationabouttheSpanningTreeFunctiononpage31.EAP1750HWDS BridgeEAP1750HWDS BridgeEAP1750HWDS BridgeClientComputerClientComputerClientComputer
24Chapter 5 Overview
25OverviewThe Overviewsectioncontainsthefollowingoptions:• Device Status• ConnectionsThefollowingsectionsdescribetheseoptions: Device StatusClicking the Device Status link under the Overview menu shows the status information about the current operating mode. • The Device Status section shows general system information such as Device Name, MAC address, Current Time, Firmware Version, and Management VLAN ID Note: VLAN ID is only applicable in Access Point or WDS AP mode. • The LAN Information section under the Connections link shows the Local Area Network settings such as the LAN IP Address, Subnet mask, Gateway, DNS Address, DHCP Client, and STP status.• The Current 2.4 GHz/5 GHz Wireless Settings section under the Basic link shows wireless information such as Operation Modes, Frequency, and Channel. Since the EAP1750H supports multiple-SSIDs, information about each SSID and security settings are displayed. Note: ProleSettingsisonlyapplicableinAccessPointor WDS AP mode.
26ConnectionsThe EAP1750H automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the Connections link under the Device Status menu. If there is not enough internal memory to log all events, older events are deleted from the log. When powered down or rebooted, the log will be cleared.Click Refresh to refresh the Connections List page.
27Chapter 6 Network
28Operation ModesTheEAP1750Hsupportsthreeoperationmodes:Access Point, WDS AP, and WDS Bridge.Device SettingsTo access operation mode, click the Wireless section under Network in the sidebar. You will see wireless settings customizable options for both the 2.4 GHz and 5 GHz modes.UnderWirelesssettings,youwillsee:Device Name: Enter a name for the device. The name you type will appear in SNMP management. This name is not the SSID and is not broadcast to other devices.Region: Select a Region to conform to local regulations.Operation Mode: Unfold the dropped list to select an operating mode.Band Steering:EnableBandSteeringtosends802.11nclients to the 5 GHz band, where 802.11b/g clientscannotgo,andleavesthe802.11b/gclientsin2.4GHztooperate at their slower rates. Band Steering works within the Access Point by directing 5 GHz-capable clients to that band. *Note:InorderfortheBandSteeringfunctiontoworkproperly, both the 2.4 Ghz and the 5 GHz SSID and security settings must be under the same selection settings.BasicThis page allows you to modify the device’s IP settings.
29IP Network SettingsSelect whether the device IP address will use the static IPaddressspeciedintheIPAddresseldorbeobtainedautomatically when the device connects to a DHCP server.IP Address: The IP Address of this device.IP Subnet Mask: The IP Subnet mask of this device.Gateway: The Default Gateway of this device. Leave it blank if you are unsure of this setting.Primary/Secondary DNS: The primary/secondary DNS address for this device.Click Save toconrmthechanges.Spanning Tree SettingsThis page allows you to modify the Spanning Tree settings. Enabling Spanning Tree protocol will prevent network loops in your LAN network.Spanning Tree Status:EnablesordisablestheSpanningTree function.Hello Time: Specify Bridge Hello Time, in seconds. Thisvalue determines how often the device sends handshake packets to communicate information about the topology throughout the entire Bridged Local Area Network.Max Age: Specify Bridge Max Age, in seconds. If another bridge in the spanning tree does not send a hello packet for a long period of time, it is assumed to be inactive.
30Forward Delay: Specifes Bridge Forward Delay, in seconds. Forwarding Delay Time is the time spent in each of the Listening and Learning states before the Forwarding state is entered. This delay is provided so that when a new bridgecomesontoabusynetwork,itanalyzesdatatrafcbeforeparticipating.Priority: Specify the Priority Number. A smaller number has greater priority.Save: Click Savetoconrmthechanges.
31Chapter 7 2.4GHz & 5GHz Wireless
32This page displays the current status of the Wireless settings of the EAP1750H.Access Point/WDS AP mode: Wireless Mode: Supports 802.11b/g/n mixed mode in2.4GHzand802.11ac/a/nmixedmodein5GHz.Channel HT Mode: The default channel bandwidth is 20/ 40MHzin2.4GHz and 20/40/80MHz in 5GHz. The largerthe channel, the better the transmission quality and speed.Extension Channel: Select Upper or Lower channel. Your selection may affect the Auto Channel function.Channel/Frequency: Select the channel and frequency appropriate for your country’s regulation.Auto: Check the option to enable the Auto-Channel feature.RTS/CTS Threshold:Speciesthethresholdpackagesizefor RTC/CTS. A small number causes RTS/CTS packets to be sent more often and consumes more bandwidth.Client Limits: Limits the total number of clients.Aggregation: Merges data packets into one packet. This option reduces the number of packets, but also increases packet sizes.AP Detection: AP Detection can select the optimal channel to use by scanning nearby areas for Access Points.Current Prole: You can congure up to eight differentSSIDs (4 in WDS AP mode). If multiple client devices will be accessing the network, you can arrange the devices into SSID groups. Click Edittoconguretheproleandcheckwhether you wish to enable extra SSIDs.Save: Click Savetoconrmthechanges.2.4GHz/5 GHz SSID ProleWireless Network
33Under Wireless Settings,youcanedittheSSIDproletotyourneeds.ClickEdit under the SSID you would like to make changes to.SSID:SpeciestheSSIDforthecurrentprole.Suppressed SSID: Check this option to hide the SSID from clients. If checked, the SSID will not appear in the site survey.Station Separation: Click the appropriate button to allow or prevent communication between client devices.Wireless Security: See the Wireless Security section on page 36.Isolation:ChecktheboxtoEnable or Disable the Isolation feature.Save: Click Save to accept the changes.
34The Wireless Security section lets you congure thesecuritymodesforEAP1750H: WEP WPA-PSK WPA2-PSK WPA-PSK Mixed WPA-Enterprise WPA2-Enterprise WPA Mixed Enterprise. It is strongly recommended that you use WPA2-PSK. Click on the Edit button under Wireless Settings next to the SSID to change the security settings. WEP Encryption:Auth Type: Select Open System or Shared Key.Input Type:ASCII:RegularText(Recommended)HEX: Hexadecimal Numbers (For advanced users)Key Length: Select the desired option and ensure thewirelessclientsusethesamesetting.Yourchoicesare:64,128,and152-bitpasswordlengths.Default Key: Select the key you wish to be default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. You must enter a Key Value for the Default Key.Wireless Security
35Encryption Key: Enter the Key Value or values you wish to use. The default is none.WPA-PSK (WPA Pre-Shared Key) Encryption:Encryption:SelecttheWPAencryptiontypeyouwouldliketo use. Please ensure that your wireless clients use the same settings.Passphrase: Wireless clients must use the same Key to associate the device. If using ASCII format, the Key must befrom8to63charactersinlength.IfusingHEXformat,the Key must be 64 HEX characters in length.Group Key Update Interval: Specify how often, in seconds, the Group Key changes. WPA2-PSK Encryption: Encryption:SelecttheWPAencryptiontypeyouwouldlike to use. Please ensure that your wireless clients use the same settings.Passphrase: Wireless clients must use the same Key to associate the device. If using ASCII format, the Key must befrom8to63charactersinlength.IfusingHEXformat,the Key must be 64 HEX characters in length.Group Key Update Interval: Specify how often, in seconds, the Group Key changes.
36WPA-PSK Mixed Encryption: Encryption:SelecttheWPAencryptiontypeyouwouldliketo use. Please ensure that your wireless clients use the same settings.Passphrase: Wireless clients must use the same Key to associate the device. If using ASCII format, the Key must befrom8to63charactersinlength.IfusingHEXformat,the Key must be 64 HEX characters in length.Group Key Update Interval: Specify how often, in seconds, the group key changes.WPA-Enterprise Encryption:Encryption: Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings.Group Key Update Interval: Specify how often, in seconds, the group key changes.Radius Server: Enter the IP address of the Radius server.Radius Port: Enter the port number used for connections to the Radius server.Radius Secret: Enter the secret required to connect to the Radius server.Radius Accounting: Enables or disables the accounting feature.
37Radius Accounting Server: Enter the IP address of theRadius accounting server.Radius Accounting Port: Enter the port number used for connections to the Radius accounting server.Radius Accounting Secret: Enter the secret required to connect to the Radius accounting server.Interim Accounting Interval: Specify how often, in seconds, the accounting data sends. Note: 802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode will automaticallychangefrom802.11nto802.11g.WPA2Enterprise Encryption:Encryption: Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings.Group Key Update Interval: Specify how often, in seconds, the group key changes.Radius Server: Enter the IP address of the Radius server.Radius Port: Enter the port number used for connections to the Radius server.Radius Secret: Enter the secret required to connect to the Radius server.Radius Accounting: Enables or disables the Radius accounting feature.
38Radius Accounting Server: Enter the IP address ofthe Radius accounting server.Radius Accounting Port: Enter the port number used for connections to the Radius accounting server.Radius Accounting Secret: Enter the secret required to connect to the Radius accounting server.Interim Accounting Interval: Specify how often, in seconds, the accounting data sends.Note: 802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode willautomaticallychangefrom802.11nto802.11g.WPA Mixed Enterprise Encryption: Encryption: Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings.Group Key Update Interval: Specify how often, in seconds, the group key changes.Radius Server: Enter the IP address of the Radius server.Radius Port: Enter the port number used for connections to the Radius server.Radius Secret: Enter the secret required to connect to the Radius server.Radius Accounting: Enables or disables the Radius accounting feature.
39Radius Accounting Server: Enter the IP address ofthe Radius accounting server.Radius Accounting Port: Enter the port number used for connections to the Radius accounting server.Radius Accounting Secret: Enter the secret required to connect to the Radius accounting server.Interim Accounting Interval: Specify how often, in seconds, the accounting data sends. Note: 802.11ndoesnotallowWEP/WPA-PSKTKIP/WPA2-PSK TKIP security mode. The connection mode will automatically change from 802.11n to802.11g.
40Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. You can manually add a MAC address to restrict permission to accessEAP1750H.Thedefaultsettingis:Disable Wireless MAC Filter.Note: Only applicable in Access Point and WDS AP mode.ACL (Access Control List) Mode: Determines whether network access is granted or denied to clients whose MAC addresses appear in the MAC address table on this page. Choicesgivenare:Disabled,DenyMACinthelist,orAllowMAC in the list.MAC Address: Enter the MAC address of the wireless client.Add: Click Add to add the MAC address to the MAC Address table.Delete: Deletes the selected entries.Save: Click Save to apply the changes.Wireless MAC Filtering
41This page allows you to congure wireless advancedsettings. It is recommended that the default settings are used unless the user has experience with more advanced networking features. 2.4 GHz/5 GHz Wireless AdvancedData Rate: Select a data rate from the drop-down list. The data rate affects throughput of data in the EAP1750H. The lower the data rate, the lower the throughput, though transmission distance will be lowered as well. Transmit Power: Set the power output of the wireless signal.RTS/CTS Threshold: Specify the threshold package size for RTC/CTS. A smaller number causes RTS/CTS packets to be sent more often and in turn consumes more bandwidth.Distance: Specify the distance between Access Points and clients. Longer distances may drop high-speed connections.Aggregation: Merges data packets into one packet. This option reduces the number of packets, but increases packet sizes.Save: Click Savetoconrmthechanges.Wireless Advanced
42The Wi-Fi Protected Setup (WPS) feature complies with the Wi-Fi Alliance WPS standard and makes it easier to quickly add client devices to an established, security-enabled Wi-Fi network. WPSreducestheuserstepsrequiredtocongureanetworkand supports two methods that are familiar to most consumerstocongureanetworkandenablesecurity.Note: Only applicable in Access Point and WDS AP mode.WPS (Wi-Fi Protected Setup)WPS: Select to Enable or Disable the WPS feature.WPS Current Status: Shows whether the WPS function is Congured or Uncongured. When it is congured, theWPS has been used to authorize a connection between the device and wireless clients.Self Pin Code: The PIN code of this device.SSID: The SSID (wireless network name) used when connecting using WPS.Authentication Mode: Shows the encryption method used by the WPS process.Passphrase Key: This is the passphrase key that is randomly generated during the WPS process. It is required if wireless clients that do not support WPS attempt to connect to the wireless network.WPS via Push Button: Click this button to initialize the WPS feature using the Push Button method.WPS via PIN: Enter the PIN code of the wireless device and click this button to initialize WPS feature using the PIN method.Save:ClickSavetoconrmthechanges.WPS (Wi-Fi Protected Setup)
43Using WDS (Wireless Distribution System) will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefcienttoimplement.Note: Compatibility between different brands and models of Access Points is not guaranteed. It is recommended that the WDS network be created using the same models for maximum compatibility.Also Note: All Access Points in the WDS network must use the same Channel and Security settings.To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS. There can be a maximum of four Access Points.Note: Only applicable in WDS AP and WDS Bridge modes.2.4 GHz/5 GHz WDS Link SettingsSecurity: Select None or AES from the drop-down list.AES Passphrase: Enter the Key Values you wish to use. Other AP(s) must use the same key to establish WDS link.MAC Address: Enter the Access Point’s MAC address to which you want to extend the wireless area.Mode:SelectDisable or Enable from the drop-down list.Save: Click Savetoconrmthechanges.WDS Link Settings
44Chapter8 Management
45This page allows you to change the EAP1750H username and password. By default, the username is admin and the password is admin. The password can contain from 0 to 12 alphanumeric characters and is case sensitive. Username:admin Password:adminAccount SettingNew Name: Enter a new username for logging in to theNew Name entry box.Current Password: Enter the current password for logging in to the Current Password entry box.New Password: Enter the new password for logging in to the New Password entry box.Conrm Password: Re-enter the new password in the ConrmPasswordentryboxforconrmation.Apply: Click Apply to save the changes.Note: it is highly reccomended that you change youpassword to something more unique regukarly for greater security.Administration
46Management VLAN SettingsThis page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software hasbeenconguredsothattheybehaveasiftheywereona separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to one another on the LAN.TocongureVLANtags,youmustrstIsolateandentera VID before enabling VLAN under Management VLAN ID.Note: Only applicable in Access Point and WDS AP mode.Prole Isolation:Restrictclientsfromcommunicatingwithdifferent VIDs by checking the Isolation box for the SSID you wish to select under the Wireless Settings funtion.VLAN ID (VID): SpeciestheVLANtagforeachprole.Management VLAN ID: If your network includes VLANs,you can specify a VLAN ID for packets pass through the Access Point with a tag. Otherwise, select no VLAN tag.Save: Click Savetoconrmthechanges.Note: 1.IfyoureconguretheManagementVLANID,youmaylose your connection to the EAP1750H. Verify that the DHCPserversupports thereconguredVLANID,thenreconnect to the EAP1750H using the new IP address. SNMP SettingsThis page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for Simple Network Management Protocol (SNMP). This is a networking
47Wireless Trafc ShapingTrafc Shaping regulates the ow of packets leaving aninterface to deliver improved Quality of Service. To edit WirelessTrafcShaping,clickEdit for the SSID you would liketocongureunderWirelessSettings.Enable Trafc Shaping:selectthisoptionfromthedrop-downboxtoenableWirelessTrafcShaping.Download Limit: Speciesthewirelesstransmissionspeedused for downloading.Upload Limit: Species the wireless transmission speedused for uploading.Save: Click Savetoconrmthechanges.
48management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the network. Upon receiving these messages, SNMP compatible devices (called agents) returns the data stored in their Management Information Bases. To congureSNMPSettings,clickundertheAdvanced tab on the side bar under Management.Status:EnablesorDisablestheSNMPfeature.Contact: Speciesthecontactdetailsofthedevice.Location: Speciesthelocationofthedevice.Port:Displaystheportnumber.Community Name (Read Only): Species the passwordfor the SNMP community for read only access.Community Name (Read/Write):Species the passwordfor the SNMP community with read/write access.Trap Destination Address: Species the port and IPaddress of the computer that will receive the SNMP traps.Trap Destination Community Name: Species thepassword for the SNMP trap community.SNMPv3 Status: Enables or Disables the SNMPv3 feature.User Name: Species the username for the SNMPv3.featureAuth Protocol: Select the Authentication Protocol type:MDS or SHA.Auth Key: Specify the Authentication Key for authentication.Backup/RestoreThis page allows you to save the current device configurations. When you save the configurations, you can also reload the saved configurations into the device through the Restore Saved Settings from a file
49Priv Protocol:SelectthePrivacyProtocoltype:DES.Priv Key: Speciestheprivacykeyforprivacy.Engine ID: SpeciestheEngineIDforSNMPv3.Save: Click Save to apply the changes.
50folder. If extreme problems occur, or if you have set the EAP1750H incorrectly, you can use the Factory Default button in the Revert to Factory Default Settings section to restore all the configurations of the EAP1750H to the original default settings. To Configure the Backup/Restore Settings, click Firmware under the Systems Manager tab.Factory SettingsBackup Settings: To restore settings that have been previously backed up, click Export, select the file, and click Restore.Restore New Setting:Choosethefileyouwishrestorefor settings and click Import.Reset to Default: Click the Reset button to restore the EAP1750H to its factory default settings.User SettingsBack Up Setting as Default: Click Backup to backup the user settings you would like to the device’s memory for the default settings.Restore to User Default: Click Restore to restore user settings to the factory standard settings.Auto Reboot SettingsYou can specify how often you would like to reboot the EAP1750H. To configure the Auto Reboot settings,
51click the Wi-Fi Scheduler tab on the side bar under Management.Auto Reboot Setting: Enables or disables the AutoReboot function.Frequency of Auto Reboot: Specifies the time andfrequency in rebooting the EAP1750H by Min, Hour, Day and/or Week. Click Save to apply the changes.Firmware UpgradeThis page allows you to upgrade the Firmware of the EAP1750H.
52To Perform the Firmware Upgrade:1. Click the Choose File button and navigate the OS File SystemtothelocationoftheFirmwareupgradele.2. Selecttheupgradele.ThenameofthelewillappearintheUpgradeFileeld.3. Click the Upload button to commence the Firmware upgrade.Note: The device is unavailable during the upgrade process and must restart when the upgrade is completed. Any connections to or through the device will be lost.Date and Time Settings This page allows you to set the internal clock of the EAP1750H. To access the Date and Time settings, click Time Zone under the Management tab on the side bar.Manually Set Date and Time: Manually specify the date and time.Synchronize with PC: Click to Synchronize the EAP1750H with the computer’s internal clock.Automatically Get Date and Time: Enter the IP address of an NTP server or use the default NTP server to have the internal clock set automatically.Time Zone: Choose the time zone you would like to use from the drop-down list.Enable Daylight Savings:Checktheboxtoenableordisable daylight savings time for ther EAP1750H. Next, enter the dates that correspond to the present year’s daylight savings time.
53Click Apply to save the changes.would like to remote to.Log Server IP Address: Enter the IP address of the log server.Apply: Click Apply to save the changes.
54System LogThis page allows you to setup the System Log and local log functions of the EAP1750H. Click Log under the Systems Manager tab to open up the System Log page.Status: Enables or disables the System Log function.Log Type: Select the Log Type mode you would like to use.Remote Log: Enables or disables the Remote Log feature. If enabled, enter the IP address of the Log youToolsThis page allows you to analyze the connection quality of the EAP1750H and trace the routing table to a target in the network.
55Ping Test Parameters Target IP/Domain Name: Enter the IP address you would like to search.Ping Packet Size: Enter the packet size of each ping.Number of Pings: Enter the number of times you wish to ping. Start Ping: Click Start Ping to begin pinging target device (via IP).Traceroute ParametersTarget IP/Domain Name: Enter an IP address or domain name you wish to trace.Start: Click Start to begin the trace route operation.Stop: Halts the traceroute test.
56Speed Test ParametersTarget IP/Domain Name: Enter an IP address or domain name you wish to run a Speed Test for.Time Period/Check Interval: Enter the time inseconds that you would like the test to run for and in how many intervals.Start:StartstheSpeedTest.LED ControlThispageallowsyoutocontroltheLEDcontrolfunctions:Power status, LAN interface, 2.4G/5G WLAN interface and WPS. Click Apply to save the settings after selecting your choices from the drop-down boxes.
57Device DiscoveryUnder Device Discovery, you can choose for the EAP1750H to Automatically scan for local devices to connect to. Click Scan to begin the process.ResetIn some circumstances, you may be required to force the device to reboot. Click on Reboot the Device to reboot the EAP1750H.
58Appendix
59Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.IMPORTANT NOTE: Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30 cm between the radiator & your body.Appendix A
60Industry Canada StatementThis device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.Avertissement:(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.Appendix B - IC Interference Statement
61FOR MOBILE DEVICE USAGE Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30cm between the radiator & your body.Pour l’utilisation de dispositifs mobiles) Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 30cm de distance entre la source de rayonnement et votre corps.
62Europe – EU Declaration of ConformityThis device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: • EN60950-1 Safety of Information Technology Equipment • EN50385 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic elds (0 Hz - 300 GHz) • EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive • EN 301 893 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive • EN 301 489-1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements • EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specic conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipmentAppendix C - CE Interference Statement
63This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG bendet.Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
64Français [French] Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas 1999/ 5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm d-Dirrettiva 1999/5/EC.Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.Português [Portuguese] [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Navigation menu