user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1323381 |
| Application ID | 1GaOK5i6Zrv4ihRDQel5+g== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 148.44kB (1855516 bits) |
| Date Submitted | 2010-08-06 00:00:00 |
| Date Available | 2010-08-09 00:00:00 |
| Creation Date | 2010-08-03 09:42:45 |
| Producing Software | Acrobat Distiller 8.2.3 (Windows) |
| Document Lastmod | 2010-08-03 09:42:54 |
| Document Title | user manual |
| Document Creator | Acrobat PDFMaker 8.1 for Word |
| Document Author: | Rubén |
AW000309 RM30 Radio Module User Manual THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. AW000309‐2 RM30 Radio Module User Manual Table of Contents Introduction ................................................................................................................................................3 Key Features ...................................................................................................................................................3 Mechanical Specifications .......................................................................................................................... 3 Dimensions .....................................................................................................................................................3 Connector Specifications ............................................................................................................................ 4 3.1 16‐pin Connector Specifications (J1) .................................................................................................. 4 3. 2 10‐pin Connector Specifications (J2) .................................................................................................. 4 3. 3 2‐ pin FM RDS antenna connector (J4) ............................................................................................... 5 3. 4 3‐pin Opt Out connector (J8) .............................................................................................................. 5 Power Supply ..............................................................................................................................................6 ZigBee Radio Interface Specifications......................................................................................................... 6 4.1 Introduction ........................................................................................................................................6 4.2 General Specifications ........................................................................................................................ 6 4.3 ZigBee Radio Transmitter Specifications ............................................................................................ 6 4.4 ZigBee Radio Receiver Specifications ................................................................................................. 7 4.5 ZigBee Antenna Specifications ........................................................................................................... 7 5.0 Regulatory Requirements (FCC and IC) .................................................................................................. 8 5.1 RF Exposure Warning.......................................................................................................................... 8 5.2 Labelling Requirements ...................................................................................................................... 8 THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 2 AW000309‐2 RM30 Radio Module User Manual Introduction This document is the User Manual for the Energate RM30 Radio Module. This Radio Module can be integrated into any number of products that require wireless connectivity. Key Features • Includes two radio subsystems which can be independently populated: a ZigBee Transceiver and a FM RDS (Radio Data System) Receiver • ZigBee transceiver utilizes Ember EM357 ZigBee System‐on‐a‐Chip (SoC) • ZigBee RF Performance − Frequency: 2405‐2480MHz (ZigBee Ch11 to 26) − Data Rate: 250kb/s − Transmit Power: 100mW (Typical) − Receiver Sensitivity: ‐102dBm (Typical) for PER=1% • Two UART channels (one per RF Subsystem) • Supply Voltage: +3.3 VDC (Typical) • Operating Temperature a. ZigBee transceiver: ‐40 to 85 °C b. FM RDS receiver: ‐10 to 75 °C • ZigBee PCB Mount Chip Antenna: +1.5dBi (Peak Gain) • FM RDS antenna: connector for external 50 ohm antenna or external short wire antenna. Mechanical Specifications Dimensions Parameter Length Width Thickness Typical dimension 80.0 44.0 13.0 Units Notes mm mm mm Total thickness Including the 10‐pin connector THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 3 AW000309‐2 RM30 Radio Module User Manual Connector Specifications 3.1 16-pin Connector Specifications (J1) The Energate RM30 Radio Module has a 16‐pin connector Samtec CLP‐108‐02‐L‐D BE. The mating connector is the Samtec ASP‐146581‐01 Below is the pin‐out of this connector. Pin 10 11 12 13 14 15 16 3. 2 Signal VSW VSW GND GND VMOD VMOD RM_AUX MASTER RESET RM_RX1 RM1_EN RM_TX1 RM0_EN RM_PRG RM_TX0 RM_RST RM_RX0 Comment Unregulated power supply input (not used in the RM30) Unregulated power supply input (not used in the RM30) +3.3V supply to the RM30. +3.3V supply to the RM30. Access to the reset input of RM1 (ZigBee) through an option resistor Reset input to both radio modules through option resistors Serial UART input to RM1 (ZigBee) Ember 357 PB5 Serial UART output from RM1 (ZigBee) Interrupt output from RM0 (FM RDS) Ember 357 PA6 Serial UART output from RM0 (FM RDS) Reset terminal of RM0 (FM RDS) Serial UART input to RM0 (FM RDS) 10-pin Connector Specifications (J2) The Energate RM30 Radio Module has a 10‐pin connector Harwin M22‐045024V1005. The mating connector is the Harwin M22‐7131042 Below is the pin‐out of this connector. THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 4 AW000309‐2 Pin 10 3. 3 Signal VMOD RM_TX1 RM_RX1 REFLASH A NC NC REFLASH B NC NC GND RM30 Radio Module User Manual Comment +3.3V supply to the RM30. Serial UART output from the Radio Module Serial UART input to the Radio Module Ember 357 PC1 Ember 357 PB4 2- pin FM RDS antenna connector (J4) The external FM RDS antenna is connected to a 2‐pin Hirose DF13‐2P‐1.25H(50) connector. The mating connector is the Hirose DF13‐2S‐1.25C receptacle with two Hirose DF13‐2630SC FA contacts. Below is the pin‐out of this connector. Pin 3. 4 Signal GND ANT Comment FM Antenna 3-pin Opt Out connector (J8) This connector is used to connect an optional Opt Out switch. The connector mounted on the RM30 PCB is the 3‐pin Hirose DF13‐3P‐1.25H(50) connector. The mating connector is the Hirose DF13‐3S‐1.25C receptacle with three Hirose DF13‐2630SC FA contacts. Below is the pin‐out of this connector. Pin Signal GND NOPTOUT GND Comment Opt Out (Active low) input THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 5 AW000309‐2 RM30 Radio Module User Manual Power Supply Parameter Voltage ZigBee transceiver input current FM RDS receiver input current Min 3.1 Current, Tx Typ 3.3 170 Max 3.5 Current, Rx 41 mA LED On 51 mA LED Off 39 mA ZigBee Radio Interface Specifications 4.1 Introduction Units mA Notes Conditions: 1) Pout=+20dBm (100mW) 2) Vcc=+3.3V Conditions: Vcc=+3.3V The following section describes the radio specifications for the ZigBee subsystem of the RM30 Radio Module. The design utilizes an Ember EM357 ZigBee System‐on‐a‐chip (SoC) to provide wireless connectivity using the IEEE 802.14.5a protocol. The EM357 is connected to an external Front End which includes a RF power amplifier and a Low Noise Amplifier. The Power Amplifier boosts the transmitted RF signal power to 100mW (Typ) and the Low Noise Amplifier improves the Receiver Sensitivity to a typical value of ‐102 dBm. 4.2 General Specifications Parameter Operating Frequency RF data rate Ambient operating Temperature Regulatory Compliance 4.3 Min 2405 ‐40 Typ 250 +24 Max 2483.5 +85 Units MHz kb/s °C FCC Part15 (Sub C) Industry Canada RS‐210 (Issue7) Notes ZigBee Transceiver Full modular approval. ZigBee Radio Transmitter Specifications − The RF transmitter power is +20dBm (100mW) for the Channels 11 through 25. Due to requirements specified in FCC Regulations (Part 15, Restricted Frequency Bands), the RF transmit power is reduced to +4dBm (2.5mW) for Channel 26 (2480 MHz). THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 6 AW000309‐2 RM30 Radio Module User Manual Parameter Transmit Output Power (2405‐2475MHz, Ch11‐Ch25) Transmit frequency offset (‐40°CC to +85°CC) 4.4 Typ 20 ‐40 Max Units dBm Notes 100mW (Typ) 40 ppm As measured with a CW tone at the transmitter output. Max Units dBm ZigBee Radio Receiver Specifications Parameter Receiver maximum input signal (PER=1%) Receiver sensitivity (PER=1%) 4.5 Min Min Typ ‐102 Notes dBm ZigBee Antenna Specifications The antenna used on the RM30 is a chip antenna with these specifications: Parameter Antenna Gain (Peak) Antenna Gain (Average) Radiation Efficiency (Average) Min Typ 1.5 ‐2.3 70 Max Units dBi dBi Notes NOTE: When integrating the Energate RM30 Radio Module into other products, only the antenna provided on the Radio Module can be used. If any other antenna is used, this is a violation of FCC and Industry Canada regulations. THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 7 AW000309‐2 RM30 Radio Module User Manual 5.0 Regulatory Requirements (FCC and IC) The Energate RM30 Radio Module device complies with FCC (Part 15) and Industry Canada (RS‐210) regulatory requirements. Operation of the RM30 is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. The Energate RM30 Radio Module can be integrated into a variety of different products. With this in mind, the RM30 has obtained Full Modular Approval from both the FCC and IC. This approval means that the RM30 is designed in such a way that it is a self‐contained entity. The RM30 can then be attached to ANY product without any further testing by the FCC or IC for (radio) regulatory compliance in the 2400‐ 2483.5MHz band. 5.1 RF Exposure Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device must be installed in accordance with the provided instructions and must be operated with minimum 20 cm spacing between the antennas and any person’s body during wireless mode of operation. Further, this transmitter must not be collocated and operated in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 5.2 Labelling Requirements When integrating the Energate RM30 Radio Module into other products, the following requirements must be met: 1. Use only the antenna provided. 2. Operate the module according to the specifications listed in this User Manual. 3. Include a label clearly visible on the exterior of the end product which states: Contains FCC ID: WUR‐RM30 IC ID: 8022A‐RM30 NOTE: It is mandatory that end users of the Energate RM30 consult all FCC and IC documentation for use of a product with modular approval, and ensure any products comply with all listed guidelines and additional testing that may be required. THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO, USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. Page 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Creator Tool : Acrobat PDFMaker 8.1 for Word Modify Date : 2010:08:03 09:42:54-04:00 Create Date : 2010:08:03 09:42:45-04:00 Metadata Date : 2010:08:03 09:42:54-04:00 Producer : Acrobat Distiller 8.2.3 (Windows) Format : application/pdf Creator : Rubén Title : Document ID : uuid:0c5796dd-591f-4a65-a1c0-2cb227d92b70 Instance ID : uuid:0966788b-a00d-4af4-8ae4-39c873e5e304 Source Modified : D:20100803131310 Page Count : 8 Page Layout : OneColumn Author : RubénEXIF Metadata provided by EXIF.tools