Enterasys Networks N Standalone Nsa Series Users Manual DFEConfig Guide

2015-02-04

• Enterasys Matrix® N Standalone (NSA) Series Configuration Guide
• Notice
  • Enterasys Networks, Inc. Firmware License Agreement
• Contents
  • Figures
  • Tables
• About This Guide
• Introduction
  • 1.1 Matrix Series Features
  • 1.2 Matrix Series CLI Overview
  • 1.3 Device Management Methods
  • 1.4 Getting Help
• Startup and General Configuration
  • 2.1 Startup and General Configuration Summary
    • 2.1.1 Factory Default Settings
    • 2.1.2 CLI “Command Defaults” Descriptions
    • 2.1.3 CLI Command Modes
    • 2.1.4 Using WebView
    • 2.1.5 Process Overview: CLI Startup and General Configuration
    • 2.1.6 Starting and Navigating the Command Line Interface
      • 2.1.6.1 Using a Console Port Connection
      • 2.1.6.2 Logging in with a Default User Account
      • 2.1.6.3 Logging in with Administratively Configured Account
      • 2.1.6.4 Using a Telnet Connection
      • 2.1.6.5 Getting Help with CLI Syntax
      • 2.1.6.6 Using Context-Sensitive Help
      • 2.1.6.7 Performing Keyword Lookups
      • 2.1.6.8 Displaying Scrolling Screens
      • 2.1.6.9 Abbreviating and Completing Commands
      • 2.1.6.10 Using the Spacebar Auto Complete Function
    • 2.1.7 Configuring the Line Editor
      • 2.1.7.1 show line-editor
      • 2.1.7.2 set line-editor
  • 2.2 General Configuration Command Set
    • 2.2.1 Setting User Accounts and Passwords
      • 2.2.1.1 show system login
      • 2.2.1.2 set system login
      • 2.2.1.3 clear system login
      • 2.2.1.4 set password
      • 2.2.1.5 set system password length
      • 2.2.1.6 set system password aging
      • 2.2.1.7 set system password history
      • 2.2.1.8 show system lockout
      • 2.2.1.9 set system lockout
    • 2.2.2 Managing the Management Authentication Notification MIB
      • 2.2.2.1 show mgmt-auth-notify
      • 2.2.2.2 set mgmt-auth-notify
      • 2.2.2.3 clear mgmt-auth-notify
    • 2.2.3 Setting Basic Device Properties
      • 2.2.3.1 show ip address
      • 2.2.3.2 set ip address
      • 2.2.3.3 clear ip address
      • 2.2.3.4 show ip gratuitous-arp
      • 2.2.3.5 set ip gratuitous-arp
      • 2.2.3.6 clear ip gratuitous-arp
      • 2.2.3.7 show system
      • 2.2.3.8 show system hardware
      • 2.2.3.9 show system utilization
      • 2.2.3.10 set system utilization threshold
      • 2.2.3.11 clear system utilization
      • 2.2.3.12 show time
      • 2.2.3.13 set time
      • 2.2.3.14 show summertime
      • 2.2.3.15 set summertime
      • 2.2.3.16 set summertime date
      • 2.2.3.17 set summertime recurring
      • 2.2.3.18 clear summertime
      • 2.2.3.19 set prompt
      • 2.2.3.20 set cli completion
      • 2.2.3.21 loop
      • 2.2.3.22 show banner motd
      • 2.2.3.23 set banner motd
      • 2.2.3.24 clear banner motd
      • 2.2.3.25 show version
      • 2.2.3.26 set system name
      • 2.2.3.27 set system location
      • 2.2.3.28 set system contact
      • 2.2.3.29 set width
      • 2.2.3.30 set length
      • 2.2.3.31 show logout
      • 2.2.3.32 set logout
      • 2.2.3.33 show physical alias
      • 2.2.3.34 set physical alias
      • 2.2.3.35 clear physical alias
      • 2.2.3.36 show physical assetid
      • 2.2.3.37 set physical assetid
      • 2.2.3.38 clear physical assetid
    • 2.2.4 Activating Licensed Features
      • 2.2.4.1 set license
      • 2.2.4.2 show license
      • 2.2.4.3 clear license
    • 2.2.5 Downloading a New Firmware Image
      • 2.2.5.1 Downloading from an FTP or TFTP Server
      • 2.2.5.2 Downloading via the Serial Port
    • 2.2.6 Reviewing and Selecting a Boot Firmware Image
      • 2.2.6.1 show boot system
      • 2.2.6.2 set boot system
    • 2.2.7 Starting and Configuring Telnet
      • 2.2.7.1 show telnet
      • 2.2.7.2 set telnet
      • 2.2.7.3 telnet
      • 2.2.7.4 show router telnet
      • 2.2.7.5 set router telnet
      • 2.2.7.6 clear router telnet
    • 2.2.8 Managing Configuration and Image Files
      • 2.2.8.1 dir
      • 2.2.8.2 show file
      • 2.2.8.3 show config
      • 2.2.8.4 configure
      • 2.2.8.5 copy
      • 2.2.8.6 delete
      • 2.2.8.7 script
    • 2.2.9 Enabling or Disabling the Path MTU Discovery Protocol
      • 2.2.9.1 show mtu
      • 2.2.9.2 set mtu
      • 2.2.9.3 clear mtu
    • 2.2.10 Pausing, Clearing and Closing the CLI
      • 2.2.10.1 wait
      • 2.2.10.2 cls (clear screen)
      • 2.2.10.3 exit | quit
    • 2.2.11 Resetting the Device
      • 2.2.11.1 show reset
      • 2.2.11.2 reset
      • 2.2.11.3 reset at
      • 2.2.11.4 reset in
      • 2.2.11.5 clear config
    • 2.2.12 Gathering Technical Support Information
      • 2.2.12.1 show support
  • 2.3 Preparing the Device for Router Mode
    • 2.3.1 Pre-Routing Configuration Tasks
    • 2.3.2 Reviewing and Configuring Routing
      • 2.3.2.1 show router
      • 2.3.2.2 set router
      • 2.3.2.3 clear router
      • 2.3.2.4 router
    • 2.3.3 Enabling Router Configuration Modes
• Configuring Discovery Protocols
  • 3.1 Overview
  • 3.2 Discovery Protocols Command Set
    • 3.2.1 Displaying Neighbors
      • 3.2.1.1 show neighbors
    • 3.2.2 Enterasys Discovery Protocol
      • 3.2.2.1 show cdp
      • 3.2.2.2 set cdp state
      • 3.2.2.3 set cdp auth
      • 3.2.2.4 set cdp interval
      • 3.2.2.5 set cdp hold-time
      • 3.2.2.6 clear cdp
    • 3.2.3 Cisco Discovery Protocol
      • 3.2.3.1 show ciscodp
      • 3.2.3.2 show ciscodp port info
      • 3.2.3.3 set ciscodp status
      • 3.2.3.4 set ciscodp timer
      • 3.2.3.5 set ciscodp holdtime
      • 3.2.3.6 set ciscodp port
      • 3.2.3.7 clear ciscodp
    • 3.2.4 Link Layer Discovery Protocol and LLDP-MED
      • 3.2.4.1 show lldp
      • 3.2.4.2 show lldp port status
      • 3.2.4.3 show lldp port trap
      • 3.2.4.4 show lldp port tx-tlv
      • 3.2.4.5 show lldp port location-info
      • 3.2.4.6 show lldp port local-info
      • 3.2.4.7 show lldp port remote-info
      • 3.2.4.8 show lldp port network-policy
      • 3.2.4.9 set lldp tx-interval
      • 3.2.4.10 set lldp hold-multiplier
      • 3.2.4.11 set lldp trap-interval
      • 3.2.4.12 set lldp med-fast-repeat
      • 3.2.4.13 set lldp port status
      • 3.2.4.14 set lldp port trap
      • 3.2.4.15 set lldp port med-trap
      • 3.2.4.16 set lldp port location-info
      • 3.2.4.17 set lldp port tx-tlv
      • 3.2.4.18 set lldp port network-policy
      • 3.2.4.19 clear lldp
      • 3.2.4.20 clear lldp port status
      • 3.2.4.21 clear lldp port trap
      • 3.2.4.22 clear lldp port med-trap
      • 3.2.4.23 clear lldp port location-info
      • 3.2.4.24 clear lldp port network-policy
      • 3.2.4.25 clear lldp port tx-tlv
• Port Configuration
  • 4.1 Port Configuration Summary
    • 4.1.1 Port String Syntax Used in the CLI
  • 4.2 Process Overview: Port Configuration
  • 4.3 Port Configuration Command Set
    • 4.3.1 Setting Console Port Properties
      • 4.3.1.1 show console
      • 4.3.1.2 clear console
      • 4.3.1.3 show console baud
      • 4.3.1.4 set console baud
      • 4.3.1.5 clear console baud
      • 4.3.1.6 show console flowcontrol
      • 4.3.1.7 set console flowcontrol
      • 4.3.1.8 clear console flowcontrol
      • 4.3.1.9 show console bits
      • 4.3.1.10 set console bits
      • 4.3.1.11 clear console bits
      • 4.3.1.12 show console stopbits
      • 4.3.1.13 set console stopbits
      • 4.3.1.14 clear console stopbits
      • 4.3.1.15 show console parity
      • 4.3.1.16 set console parity
      • 4.3.1.17 clear console parity
    • 4.3.2 Reviewing Port Status
      • 4.3.2.1 show port
      • 4.3.2.2 show port status
      • 4.3.2.3 show port counters
      • 4.3.2.4 show port operstatuscause
      • 4.3.2.5 clear port operstatuscause
    • 4.3.3 Disabling / Enabling and Naming Ports
      • 4.3.3.1 set port disable
      • 4.3.3.2 set port enable
      • 4.3.3.3 show port alias
      • 4.3.3.4 set port alias
      • 4.3.3.5 show forcelinkdown
      • 4.3.3.6 set forcelinkdown
      • 4.3.3.7 clear forcelinkdown
    • 4.3.4 Setting Speed and Duplex Mode
      • 4.3.4.1 show port speed
      • 4.3.4.2 set port speed
      • 4.3.4.3 show port duplex
      • 4.3.4.4 set port duplex
    • 4.3.5 Enabling / Disabling Jumbo Frame Support
      • 4.3.5.1 show port jumbo
      • 4.3.5.2 set port jumbo
      • 4.3.5.3 clear port jumbo
    • 4.3.6 Setting Auto-Negotiation and Advertised Ability
      • 4.3.6.1 show port negotiation
      • 4.3.6.2 set port negotiation
      • 4.3.6.3 show port mdix
      • 4.3.6.4 set port mdix
      • 4.3.6.5 clear port mdix
      • 4.3.6.6 show port advertise
      • 4.3.6.7 set port advertise
      • 4.3.6.8 clear port advertise
    • 4.3.7 Setting Flow Control
      • 4.3.7.1 show port flowcontrol
      • 4.3.7.2 set port flowcontrol
    • 4.3.8 Configuring Link Traps and Link Flap Detection
      • 4.3.8.1 show port trap
      • 4.3.8.2 set port trap
      • 4.3.8.3 show linkflap
      • 4.3.8.4 set linkflap globalstate
      • 4.3.8.5 set linkflap
      • 4.3.8.6 set linkflap interval
      • 4.3.8.7 set linkflap action
      • 4.3.8.8 clear linkflap action
      • 4.3.8.9 set linkflap threshold
      • 4.3.8.10 set linkflap downtime
      • 4.3.8.11 clear linkflap down
      • 4.3.8.12 clear linkflap
    • 4.3.9 Configuring Broadcast Suppression
      • 4.3.9.1 show port broadcast
      • 4.3.9.2 set port broadcast
      • 4.3.9.3 clear port broadcast
  • 4.4 Configuring Port Mirroring
    • 4.4.1 Supported Mirrors
    • 4.4.2 IDS Mirroring Considerations
    • 4.4.3 Active Destination Port Configurations
    • 4.4.4 Setting Port Mirroring
      • 4.4.4.1 show port mirroring
      • 4.4.4.2 set port mirroring
      • 4.4.4.3 clear port mirroring
  • 4.5 Configuring LACP
    • 4.5.1 LACP Operation
    • 4.5.2 LACP Terminology
    • 4.5.3 Matrix Series Usage Considerations
    • 4.5.4 Configuring Link Aggregation
      • 4.5.4.1 show lacp
      • 4.5.4.2 set lacp
      • 4.5.4.3 clear lacp state
      • 4.5.4.4 set lacp asyspri
      • 4.5.4.5 set lacp aadminkey
      • 4.5.4.6 clear lacp
      • 4.5.4.7 set lacp static
      • 4.5.4.8 clear lacp static
      • 4.5.4.9 show lacp singleportlag
      • 4.5.4.10 set singleportlag
      • 4.5.4.11 clear singleportlag
      • 4.5.4.12 show port lacp
      • 4.5.4.13 set port lacp
      • 4.5.4.14 clear port lacp
      • 4.5.4.15 show lacp flowRegeneration
      • 4.5.4.16 set lacp flowRegeneration
      • 4.5.4.17 clear lacp flowRegeneration
      • 4.5.4.18 show lacp outportAlgorithm
      • 4.5.4.19 set lacp outportAlgorithm
      • 4.5.4.20 clear lacp outportAlgorithm
• SNMP Configuration
  • 5.1 SNMP Configuration Summary
    • 5.1.1 SNMPv1 and SNMPv2c
    • 5.1.2 SNMPv3
    • 5.1.3 About SNMP Security Models and Levels
    • 5.1.4 Using SNMP Contexts to Access Specific MIBs or Routing Modules
  • 5.2 Process Overview: SNMP Configuration
  • 5.3 SNMP Configuration Command Set
    • 5.3.1 Reviewing SNMP Statistics
      • 5.3.1.1 show snmp engineid
      • 5.3.1.2 show snmp counters
    • 5.3.2 Configuring SNMP Users, Groups and Communities
      • 5.3.2.1 show snmp user
      • 5.3.2.2 set snmp user
      • 5.3.2.3 clear snmp user
      • 5.3.2.4 show snmp group
      • 5.3.2.5 set snmp group
      • 5.3.2.6 clear snmp group
      • 5.3.2.7 show snmp community
      • 5.3.2.8 set snmp community
      • 5.3.2.9 clear snmp community
    • 5.3.3 Configuring SNMP Access Rights
      • 5.3.3.1 show snmp access
      • 5.3.3.2 set snmp access
      • 5.3.3.3 clear snmp access
    • 5.3.4 Configuring SNMP MIB Views
      • 5.3.4.1 show snmp view
      • 5.3.4.2 show snmp context
      • 5.3.4.3 set snmp view
      • 5.3.4.4 clear snmp view
    • 5.3.5 Configuring SNMP Target Parameters
      • 5.3.5.1 show snmp targetparams
      • 5.3.5.2 set snmp targetparams
      • 5.3.5.3 clear snmp targetparams
    • 5.3.6 Configuring SNMP Target Addresses
      • 5.3.6.1 show snmp targetaddr
      • 5.3.6.2 set snmp targetaddr
      • 5.3.6.3 clear snmp targetaddr
    • 5.3.7 Configuring SNMP Notification Parameters
      • 5.3.7.1 show snmp notify
      • 5.3.7.2 set snmp notify
      • 5.3.7.3 clear snmp notify
      • 5.3.7.4 show snmp notifyfilter
      • 5.3.7.5 set snmp notifyfilter
      • 5.3.7.6 clear snmp notifyfilter
      • 5.3.7.7 show snmp notifyprofile
      • 5.3.7.8 set snmp notifyprofile
      • 5.3.7.9 clear snmp notifyprofile
    • 5.3.8 Creating a Basic SNMP Trap Configuration
• Spanning Tree Configuration
  • 6.1 Spanning Tree Configuration Summary
    • 6.1.1 Overview: Single, Rapid and Multiple Spanning Tree Protocols
    • 6.1.2 Spanning Tree Features
    • 6.1.3 Loop Protect
    • 6.1.4 Process Overview: Spanning Tree Configuration
  • 6.2 Spanning Tree Configuration Command Set
    • 6.2.1 Configuring Spanning Tree Bridge Parameters
      • 6.2.1.1 show spantree stats
      • 6.2.1.2 show spantree version
      • 6.2.1.3 set spantree version
      • 6.2.1.4 clear spantree version
      • 6.2.1.5 show spantree stpmode
      • 6.2.1.6 set spantree stpmode
      • 6.2.1.7 clear spantree stpmode
      • 6.2.1.8 show spantree maxconfigurablestps
      • 6.2.1.9 set spantree maxconfigurablestps
      • 6.2.1.10 clear spantree maxconfigurablestps
      • 6.2.1.11 show spantree mstilist
      • 6.2.1.12 set spantree msti
      • 6.2.1.13 clear spantree msti
      • 6.2.1.14 show spantree mstmap
      • 6.2.1.15 set spantree mstmap
      • 6.2.1.16 clear spantree mstmap
      • 6.2.1.17 show spantree vlanlist
      • 6.2.1.18 show spantree mstcfgid
      • 6.2.1.19 set spantree mstcfgid
      • 6.2.1.20 clear spantree mstcfgid
      • 6.2.1.21 show spantree bridgeprioritymode
      • 6.2.1.22 set spantree bridgeprioritymode
      • 6.2.1.23 clear spantree bridgeprioritymode
      • 6.2.1.24 show spantree priority
      • 6.2.1.25 set spantree priority
      • 6.2.1.26 clear spantree priority
      • 6.2.1.27 show spantree bridgehellomode
      • 6.2.1.28 set spantree bridgehellomode
      • 6.2.1.29 clear spantree bridgehellomode
      • 6.2.1.30 show spantree hello
      • 6.2.1.31 set spantree hello
      • 6.2.1.32 clear spantree hello
      • 6.2.1.33 show spantree maxage
      • 6.2.1.34 set spantree maxage
      • 6.2.1.35 clear spantree maxage
      • 6.2.1.36 show spantree fwddelay
      • 6.2.1.37 set spantree fwddelay
      • 6.2.1.38 clear spantree fwddelay
      • 6.2.1.39 show spantree autoedge
      • 6.2.1.40 set spantree autoedge
      • 6.2.1.41 clear spantree autoedge
      • 6.2.1.42 show spantree legacypathcost
      • 6.2.1.43 set spantree legacypathcost
      • 6.2.1.44 clear spantree legacypathcost
      • 6.2.1.45 show spantree tctrapsuppress
      • 6.2.1.46 set spantree tctrapsuppress
      • 6.2.1.47 clear spantree tctrapsuppress
      • 6.2.1.48 show spantree txholdcount
      • 6.2.1.49 set spantree txholdcount
      • 6.2.1.50 clear spantree txholdcount
      • 6.2.1.51 show spantree maxhops
      • 6.2.1.52 set spantree maxhops
      • 6.2.1.53 clear spantree maxhops
      • 6.2.1.54 show spantree spanguard
      • 6.2.1.55 set spantree spanguard
      • 6.2.1.56 clear spantree spanguard
      • 6.2.1.57 show spantree spanguardtimeout
      • 6.2.1.58 set spantree spanguardtimeout
      • 6.2.1.59 clear spantree spanguardtimeout
      • 6.2.1.60 show spantree spanguardlock
      • 6.2.1.61 clear / set spantree spanguardlock
      • 6.2.1.62 show spantree spanguardtrapenable
      • 6.2.1.63 set spantree spanguardtrapenable
      • 6.2.1.64 clear spantree spanguardtrap enable
      • 6.2.1.65 show spantree backuproot
      • 6.2.1.66 set spantree backuproot
      • 6.2.1.67 clear spantree backuproot
      • 6.2.1.68 show spantree backuproottrapendable
      • 6.2.1.69 set spantree backuproottrapenable
      • 6.2.1.70 clear spantree backuproottrapenable
      • 6.2.1.71 show spantree newroottrapendable
      • 6.2.1.72 set spantree newroottrapenable
      • 6.2.1.73 clear spantree newroottrapenable
      • 6.2.1.74 clear spantree default
      • 6.2.1.75 show spantree debug
      • 6.2.1.76 clear spantree debug
    • 6.2.2 Configuring Spanning Tree Port Parameters
      • 6.2.2.1 show spantree portenable
      • 6.2.2.2 set spantree portenable
      • 6.2.2.3 clear spantree portenable
      • 6.2.2.4 show spantree portadmin
      • 6.2.2.5 set spantree portadmin
      • 6.2.2.6 clear spantree portadmin
      • 6.2.2.7 set spantree protomigration
      • 6.2.2.8 show spantree portstate
      • 6.2.2.9 show spantree blockedports
      • 6.2.2.10 show spantree portpri
      • 6.2.2.11 set spantree portpri
      • 6.2.2.12 clear spantree portpri
      • 6.2.2.13 set spantree porthello
      • 6.2.2.14 clear spantree porthello
      • 6.2.2.15 show spantree portcost
      • 6.2.2.16 show spantree adminpathcost
      • 6.2.2.17 set spantree adminpathcost
      • 6.2.2.18 clear spantree adminpathcost
      • 6.2.2.19 show spantree adminedge
      • 6.2.2.20 set spantree adminedge
      • 6.2.2.21 clear spantree adminedge
      • 6.2.2.22 show spantree operedge
      • 6.2.2.23 show spantree adminpoint
      • 6.2.2.24 show spantree operpoint
      • 6.2.2.25 set spantree adminpoint
      • 6.2.2.26 clear spantree adminpoint
    • 6.2.3 Configuring Spanning Tree Loop Protect Features
      • 6.2.3.1 set spantree lp
      • 6.2.3.2 show spantree lp
      • 6.2.3.3 clear spantree lp
      • 6.2.3.4 show spantree lplock
      • 6.2.3.5 clear spantree lplock
      • 6.2.3.6 set spantree lpcapablepartner
      • 6.2.3.7 show spantree lpcapablepartner
      • 6.2.3.8 clear spantree lpcapablepartner
      • 6.2.3.9 set spantree lpthreshold
      • 6.2.3.10 show spantree lpthreshold
      • 6.2.3.11 clear spantree lpthreshold
      • 6.2.3.12 set spantree lpwindow
      • 6.2.3.13 show spantree lpwindow
      • 6.2.3.14 clear spantree lpwindow
      • 6.2.3.15 set spantree lptrapenable
      • 6.2.3.16 show spantree lptrapenable
      • 6.2.3.17 clear spantree lptrapenable
      • 6.2.3.18 set spantree disputedbpduthreshold
      • 6.2.3.19 show spantree disputedbpduthreshold
      • 6.2.3.20 clear spantree disputedbpduthreshold
      • 6.2.3.21 show spantree nonforwardingreason
• 802.1Q VLAN Configuration
  • 7.1 VLAN Configuration Summary
    • 7.1.1 Port Assignment Scheme
    • 7.1.2 Port String Syntax Used in the CLI
  • 7.2 Process Overview: 802.1Q VLAN Configuration
  • 7.3 VLAN Configuration Command Set
    • 7.3.1 Reviewing Existing VLANs
      • 7.3.1.1 show vlan
    • 7.3.2 Creating and Naming Static VLANs
      • 7.3.2.1 set vlan
      • 7.3.2.2 set vlan name
      • 7.3.2.3 clear vlan
      • 7.3.2.4 clear vlan name
    • 7.3.3 Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
      • 7.3.3.1 show port vlan
      • 7.3.3.2 set port vlan
      • 7.3.3.3 clear port vlan
      • 7.3.3.4 show vlan interface
      • 7.3.3.5 set vlan interface
      • 7.3.3.6 clear vlan interface
      • 7.3.3.7 show port ingress filter
      • 7.3.3.8 set port ingress filter
      • 7.3.3.9 show port discard
      • 7.3.3.10 set port discard
      • 7.3.3.11 clear port discard
    • 7.3.4 Configuring the VLAN Egress List
      • 7.3.4.1 show port egress
      • 7.3.4.2 set vlan egress
      • 7.3.4.3 clear vlan egress
      • 7.3.4.4 show vlan dynamic egress
      • 7.3.4.5 set vlan dynamicegress
    • 7.3.5 Creating a Secure Management VLAN
    • 7.3.6 Enabling/Disabling GVRP
      • 7.3.6.1 show gvrp
      • 7.3.6.2 show garp timer
      • 7.3.6.3 set gvrp
      • 7.3.6.4 clear gvrp
      • 7.3.6.5 set garp timer
      • 7.3.6.6 clear garp timer
• Policy Classification Configuration
  • 8.1 Policy Classification Configuration Summary
  • 8.2 Process Overview: Policy Classification Configuration
  • 8.3 Policy Classification Configuration Command Set
    • 8.3.1 Configuring Policy Profiles
      • 8.3.1.1 show policy profile
      • 8.3.1.2 set policy profile
      • 8.3.1.3 clear policy profile
      • 8.3.1.4 show policy invalid
      • 8.3.1.5 set policy invalid action
      • 8.3.1.6 clear policy invalid action
      • 8.3.1.7 set port tci overwrite
      • 8.3.1.8 show policy accounting
      • 8.3.1.9 set policy accounting
      • 8.3.1.10 clear policy accounting
      • 8.3.1.11 show policy syslog
      • 8.3.1.12 set policy syslog
      • 8.3.1.13 clear policy syslog
      • 8.3.1.14 set policy maptable
      • 8.3.1.15 show policy maptable
      • 8.3.1.16 clear policy maptable
    • 8.3.2 Assigning Classification Rules to Policy Profiles
      • 8.3.2.1 show policy rule
      • 8.3.2.2 show policy capability
      • 8.3.2.3 set policy classify
      • 8.3.2.4 set policy rule
      • 8.3.2.5 clear policy rule
      • 8.3.2.6 clear policy all-rules
      • 8.3.2.7 set policy port
      • 8.3.2.8 show policy allowed-type
      • 8.3.2.9 set policy allowed-type
      • 8.3.2.10 clear policy allowed-type
      • 8.3.2.11 clear policy port-hit
    • 8.3.3 Configuring Policy Class of Service (CoS)
      • 8.3.3.1 show cos state
      • 8.3.3.2 set cos state
      • 8.3.3.3 show cos port-type
      • 8.3.3.4 show cos unit
      • 8.3.3.5 show cos port-config
      • 8.3.3.6 set cos port-config irl
      • 8.3.3.7 clear cos port-config irl
      • 8.3.3.8 set cos port-config txq
      • 8.3.3.9 clear cos port-config txq
      • 8.3.3.10 show cos port-resource
      • 8.3.3.11 set cos port-resource irl
      • 8.3.3.12 clear cos port-resource irl
      • 8.3.3.13 set cos port-resource txq
      • 8.3.3.14 clear cos port-resource txq
      • 8.3.3.15 show cos reference
      • 8.3.3.16 set cos reference irl
      • 8.3.3.17 clear cos reference irl
      • 8.3.3.18 set cos reference txq
      • 8.3.3.19 clear cos reference txq
      • 8.3.3.20 show cos settings
      • 8.3.3.21 set cos settings
      • 8.3.3.22 clear cos settings
      • 8.3.3.23 show cos violation irl
      • 8.3.3.24 clear cos violation irl
      • 8.3.3.25 clear cos all-entries
• Port Priority and Rate Limiting Configuration
  • 9.1 Port Priority Configuration Summary
  • 9.2 Process Overview: Port Priority and Rate Limiting Configuration
  • 9.3 Port Priority and Rate Limiting Configuration Command Set
    • 9.3.1 Configuring Port Priority
      • 9.3.1.1 show port priority
      • 9.3.1.2 set port priority
      • 9.3.1.3 clear port priority
    • 9.3.2 Configuring Priority to Transmit Queue Mapping
      • 9.3.2.1 show port priority-queue
      • 9.3.2.2 set port priority-queue
      • 9.3.2.3 clear port priority-queue
    • 9.3.3 Configuring Port Traffic Rate Limiting
      • 9.3.3.1 show port ratelimit
      • 9.3.3.2 set port ratelimit
      • 9.3.3.3 clear port ratelimit
• IGMP Configuration
  • 10.1 About IP Multicast Group Management
  • 10.2 IGMP Configuration Summary
  • 10.3 Process Overview: IGMP Configuration
  • 10.4 IGMP Configuration Command Set
    • 10.4.1 Enabling / Disabling IGMP
      • 10.4.1.1 show igmp enable
      • 10.4.1.2 set igmp enable
      • 10.4.1.3 set igmp disable
    • 10.4.2 Configuring IGMP
      • 10.4.2.1 show igmp query
      • 10.4.2.2 set igmp query-enable
      • 10.4.2.3 set igmp query-disable
      • 10.4.2.4 show igmp grp-full-action
      • 10.4.2.5 set igmp grp-full-action
      • 10.4.2.6 show igmp config
      • 10.4.2.7 set igmp config
      • 10.4.2.8 set igmp delete
      • 10.4.2.9 show igmp groups
      • 10.4.2.10 show igmp static
      • 10.4.2.11 set igmp add-static
      • 10.4.2.12 set igmp remove-static
      • 10.4.2.13 show igmp protocols
      • 10.4.2.14 set igmp protocols
      • 10.4.2.15 clear igmp protocols
      • 10.4.2.16 show igmp vlan
      • 10.4.2.17 show igmp reporters
      • 10.4.2.18 show igmp flow
      • 10.4.2.19 show igmp counters
      • 10.4.2.20 show igmp number-groups
• Logging and Network Management
  • 11.1 Process Overview: Network Management
  • 11.2 Logging And Network Management Command Set
    • 11.2.1 Configuring System Logging
      • 11.2.1.1 show logging all
      • 11.2.1.2 show logging server
      • 11.2.1.3 set logging server
      • 11.2.1.4 clear logging server
      • 11.2.1.5 show logging default
      • 11.2.1.6 set logging default
      • 11.2.1.7 clear logging default
      • 11.2.1.8 show logging application
      • 11.2.1.9 set logging application
      • 11.2.1.10 clear logging application
      • 11.2.1.11 show logging local
      • 11.2.1.12 set logging local
      • 11.2.1.13 clear logging local
      • 11.2.1.14 set logging here
      • 11.2.1.15 clear logging here
      • 11.2.1.16 show logging buffer
    • 11.2.2 Monitoring Network Events and Status
      • 11.2.2.1 history
      • 11.2.2.2 show history
      • 11.2.2.3 set history
      • 11.2.2.4 show netstat
      • 11.2.2.5 ping
      • 11.2.2.6 show users
      • 11.2.2.7 tell
      • 11.2.2.8 disconnect
    • 11.2.3 Configuring SMON
      • 11.2.3.1 show smon priority
      • 11.2.3.2 set smon priority
      • 11.2.3.3 clear smon priority
      • 11.2.3.4 show smon vlan
      • 11.2.3.5 set smon vlan
      • 11.2.3.6 clear smon vlan
    • 11.2.4 Configuring RMON
      • 11.2.4.1 show rmon stats
      • 11.2.4.2 set rmon stats
      • 11.2.4.3 clear rmon stats
      • 11.2.4.4 show rmon history
      • 11.2.4.5 set rmon history
      • 11.2.4.6 clear rmon history
      • 11.2.4.7 show rmon alarm
      • 11.2.4.8 set rmon alarm properties
      • 11.2.4.9 set rmon alarm status
      • 11.2.4.10 clear rmon alarm
      • 11.2.4.11 show rmon event
      • 11.2.4.12 set rmon event properties
      • 11.2.4.13 set rmon event status
      • 11.2.4.14 clear rmon event
      • 11.2.4.15 show rmon host
      • 11.2.4.16 set rmon host properties
      • 11.2.4.17 set rmon host status
      • 11.2.4.18 clear rmon host
      • 11.2.4.19 show rmon topN
      • 11.2.4.20 set rmon topN properties
      • 11.2.4.21 set rmon topN status
      • 11.2.4.22 clear rmon topN
      • 11.2.4.23 show rmon matrix
      • 11.2.4.24 set rmon matrix properties
      • 11.2.4.25 set rmon matrix status
      • 11.2.4.26 clear rmon matrix
      • 11.2.4.27 show rmon channel
      • 11.2.4.28 set rmon channel
      • 11.2.4.29 clear rmon channel
      • 11.2.4.30 show rmon filter
      • 11.2.4.31 set rmon filter
      • 11.2.4.32 clear rmon filter
      • 11.2.4.33 show rmon capture
      • 11.2.4.34 set rmon capture
      • 11.2.4.35 clear rmon capture
    • 11.2.5 Managing Switch Network Addresses and Routes
      • 11.2.5.1 show arp
      • 11.2.5.2 set arp
      • 11.2.5.3 clear arp
      • 11.2.5.4 show rad
      • 11.2.5.5 set rad
      • 11.2.5.6 show ip route
      • 11.2.5.7 traceroute
      • 11.2.5.8 set ip route
      • 11.2.5.9 clear ip route
      • 11.2.5.10 show port mac
      • 11.2.5.11 show mac
      • 11.2.5.12 set mac
      • 11.2.5.13 clear mac
      • 11.2.5.14 show newaddrtraps
      • 11.2.5.15 set newaddrtraps
      • 11.2.5.16 show movedaddrtrap
      • 11.2.5.17 set movedaddrtrap
    • 11.2.6 Configuring Simple Network Time Protocol (SNTP)
      • 11.2.6.1 show sntp
      • 11.2.6.2 set sntp client
      • 11.2.6.3 clear sntp client
      • 11.2.6.4 set sntp server
      • 11.2.6.5 clear sntp server
      • 11.2.6.6 set sntp broadcastdelay
      • 11.2.6.7 clear sntp broadcast delay
      • 11.2.6.8 set sntp poll-interval
      • 11.2.6.9 clear sntp poll-interval
      • 11.2.6.10 set sntp poll-retry
      • 11.2.6.11 clear sntp poll-retry
      • 11.2.6.12 set sntp poll-timeout
      • 11.2.6.13 clear sntp poll-timeout
      • 11.2.6.14 show timezone
      • 11.2.6.15 set timezone
      • 11.2.6.16 clear timezone
    • 11.2.7 Configuring Node Aliases
      • 11.2.7.1 show nodealias
      • 11.2.7.2 show nodealias mac
      • 11.2.7.3 show nodealias protocol
      • 11.2.7.4 show nodealias config
      • 11.2.7.5 set nodealias
      • 11.2.7.6 set nodealias maxentries
      • 11.2.7.7 clear nodealias
      • 11.2.7.8 clear nodealias config
    • 11.2.8 Configuring NetFlow
      • 11.2.8.1 show netflow
      • 11.2.8.2 set netflow cache
      • 11.2.8.3 clear netflow cache
      • 11.2.8.4 set netflow export-destination
      • 11.2.8.5 clear netflow export-destination
      • 11.2.8.6 set netflow export-interval
      • 11.2.8.7 clear netflow export-interval
      • 11.2.8.8 set netflow port
      • 11.2.8.9 clear netflow port
      • 11.2.8.10 set netflow export-version
      • 11.2.8.11 clear netflow export-version
      • 11.2.8.12 set netflow template
      • 11.2.8.13 clear netflow template
• IP Configuration
  • 12.1 Process Overview: Internet Protocol (IP) Configuration
  • 12.2 IP Configuration Command Set
    • 12.2.1 Configuring Routing Interface Settings
      • 12.2.1.1 show interface
      • 12.2.1.2 interface
      • 12.2.1.3 ip ecm-forwarding-algorithm
      • 12.2.1.4 show ip interface
      • 12.2.1.5 ip address
      • 12.2.1.6 no shutdown
    • 12.2.2 Managing Router Configuration Files
      • 12.2.2.1 show running-config
      • 12.2.2.2 write
      • 12.2.2.3 no ip routing
    • 12.2.3 Performing a Basic Router Configuration
      • 12.2.3.1 Using Router-Only Config Files
      • 12.2.3.2 Displaying or Writing the Current Config to a File
      • 12.2.3.3 Configuring the Router
    • 12.2.4 Reviewing and Configuring the ARP Table
      • 12.2.4.1 show ip arp
      • 12.2.4.2 arp
      • 12.2.4.3 ip gratuitous-arp
      • 12.2.4.4 ip gratuitous-arp-learning
      • 12.2.4.5 ip proxy-arp
      • 12.2.4.6 ip mac-address
      • 12.2.4.7 arp timeout
      • 12.2.4.8 clear arp-cache
    • 12.2.5 Configuring Broadcast Settings
      • 12.2.5.1 ip directed-broadcast
      • 12.2.5.2 ip forward-protocol
      • 12.2.5.3 ip helper-address
    • 12.2.6 Reviewing IP Traffic and Configuring Routes
      • 12.2.6.1 show ip protocols
      • 12.2.6.2 show ip traffic
      • 12.2.6.3 clear ip stats
      • 12.2.6.4 show ip route
      • 12.2.6.5 ip route
      • 12.2.6.6 ip icmp
      • 12.2.6.7 ping
      • 12.2.6.8 traceroute
    • 12.2.7 Configuring PIM
      • 12.2.7.1 ip pim sparse mode
      • 12.2.7.2 ip pim bsr-candidate
      • 12.2.7.3 ip pim dr-priority
      • 12.2.7.4 ip pim rp-address
      • 12.2.7.5 ip pim rp-candidate
      • 12.2.7.6 show ip pim bsr
      • 12.2.7.7 show ip pim interface
      • 12.2.7.8 show ip pim neighbor
      • 12.2.7.9 show ip pim rp
      • 12.2.7.10 show ip pim rp-hash
      • 12.2.7.11 show ip mroute
      • 12.2.7.12 show ip mforward
      • 12.2.7.13 show ip rpf
    • 12.2.8 Configuring Load Sharing Network Address Translation (LSNAT)
      • 12.2.8.1 show ip slb serverfarms
      • 12.2.8.2 ip slb ftpctrlport
      • 12.2.8.3 ip slb serverfarm
      • 12.2.8.4 real
      • 12.2.8.5 predictor
      • 12.2.8.6 sticky
      • 12.2.8.7 show ip slb reals
      • 12.2.8.8 inservice (real server)
      • 12.2.8.9 faildetect (real server)
      • 12.2.8.10 maxconns
      • 12.2.8.11 weight
      • 12.2.8.12 show ip slb vservers
      • 12.2.8.13 ip slb vserver
      • 12.2.8.14 serverfarm
      • 12.2.8.15 virtual
      • 12.2.8.16 inservice (virtual server)
      • 12.2.8.17 client
      • 12.2.8.18 persistence level
      • 12.2.8.19 allow accessservers
      • 12.2.8.20 ip slb allowaccess_all
      • 12.2.8.21 show ip slb conns
      • 12.2.8.22 show ip slb stats
      • 12.2.8.23 show ip slb sticky
      • 12.2.8.24 clear ip slb
      • 12.2.8.25 show router limits
      • 12.2.8.26 set router limits
      • 12.2.8.27 clear router limits
    • 12.2.9 Configuring Dynamic Host Configuration Protocol (DHCP)
      • 12.2.9.1 ip dhcp server
      • 12.2.9.2 ip local pool
      • 12.2.9.3 exclude
      • 12.2.9.4 ip dhcp ping packets
      • 12.2.9.5 ip dhcp ping timeout
      • 12.2.9.6 ip dhcp pool
      • 12.2.9.7 domain-name
      • 12.2.9.8 dns-server
      • 12.2.9.9 netbios-name-server
      • 12.2.9.10 netbios-node-type
      • 12.2.9.11 default-router
      • 12.2.9.12 bootfile
      • 12.2.9.13 next-server
      • 12.2.9.14 option
      • 12.2.9.15 lease
      • 12.2.9.16 host
      • 12.2.9.17 client-class
      • 12.2.9.18 client-identifier
      • 12.2.9.19 client-name
      • 12.2.9.20 hardware-address
      • 12.2.9.21 show ip dhcp binding
      • 12.2.9.22 clear ip dhcp binding
      • 12.2.9.23 show ip dhcp server statistics
      • 12.2.9.24 clear ip dhcp server statistics
• Routing Protocol Configuration
  • 13.1 Process Overview: Routing Protocol Configuration
  • 13.2 Routing Protocol Configuration Command Set
    • 13.2.1 Activating Advanced Routing Features
    • 13.2.2 Configuring RIP
      • 13.2.2.1 router rip
      • 13.2.2.2 network
      • 13.2.2.3 neighbor
      • 13.2.2.4 distance
      • 13.2.2.5 ip rip offset
      • 13.2.2.6 timers
      • 13.2.2.7 ip rip send version
      • 13.2.2.8 ip rip receive version
      • 13.2.2.9 key chain
      • 13.2.2.10 key
      • 13.2.2.11 key-string
      • 13.2.2.12 accept-lifetime
      • 13.2.2.13 send-lifetime
      • 13.2.2.14 ip rip authentication keychain
      • 13.2.2.15 ip rip authentication mode
      • 13.2.2.16 no auto-summary
      • 13.2.2.17 ip rip disable-triggered-updates
      • 13.2.2.18 ip split-horizon poison
      • 13.2.2.19 passive-interface
      • 13.2.2.20 receive-interface
      • 13.2.2.21 distribute-list
      • 13.2.2.22 redistribute
    • 13.2.3 Configuring OSPF
      • 13.2.3.1 router ospf
      • 13.2.3.2 network
      • 13.2.3.3 router id
      • 13.2.3.4 ip ospf cost
      • 13.2.3.5 ip ospf priority
      • 13.2.3.6 timers spf
      • 13.2.3.7 ip ospf retransmit-interval
      • 13.2.3.8 ip ospf transmit-delay
      • 13.2.3.9 ip ospf hello-interval
      • 13.2.3.10 ip ospf dead-interval
      • 13.2.3.11 ip ospf authentication-key
      • 13.2.3.12 ip ospf message digest key md5
      • 13.2.3.13 distance ospf
      • 13.2.3.14 area range
      • 13.2.3.15 area authentication
      • 13.2.3.16 area stub
      • 13.2.3.17 area default cost
      • 13.2.3.18 area nssa
      • 13.2.3.19 area virtual-link
      • 13.2.3.20 passive-interface
      • 13.2.3.21 redistribute
      • 13.2.3.22 database-overflow
      • 13.2.3.23 show ip ospf
      • 13.2.3.24 show ip ospf database
      • 13.2.3.25 show ip ospf border-routers
      • 13.2.3.26 show ip ospf interface
      • 13.2.3.27 show ip ospf neighbor
      • 13.2.3.28 show ip ospf virtual-links
      • 13.2.3.29 clear ip ospf process
      • 13.2.3.30 debug ip ospf
      • 13.2.3.31 rfc1583compatible
    • 13.2.4 Configuring DVMRP
      • 13.2.4.1 ip dvmrp
      • 13.2.4.2 ip dvmrp metric
      • 13.2.4.3 show ip dvmrp route
    • 13.2.5 Configuring IRDP
      • 13.2.5.1 ip irdp
      • 13.2.5.2 ip irdp maxadvertinterval
      • 13.2.5.3 ip irdp minadvertinterval
      • 13.2.5.4 ip irdp holdtime
      • 13.2.5.5 ip irdp preference
      • 13.2.5.6 ip irdp address
      • 13.2.5.7 no ip irdp multicast
      • 13.2.5.8 show ip irdp
    • 13.2.6 Configuring VRRP
      • 13.2.6.1 router vrrp
      • 13.2.6.2 create
      • 13.2.6.3 address
      • 13.2.6.4 priority
      • 13.2.6.5 master-icmp-reply
      • 13.2.6.6 advertise-interval
      • 13.2.6.7 critical-ip
      • 13.2.6.8 preempt
      • 13.2.6.9 preempt-delay
      • 13.2.6.10 enable
      • 13.2.6.11 ip vrrp authentication-key
      • 13.2.6.12 ip vrrp message-digest-key
      • 13.2.6.13 show ip vrrp
• Security Configuration
  • 14.1 Overview of Security Methods
    • 14.1.1 RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment
  • 14.2 Process Overview: Security Configuration
  • 14.3 Security Configuration Command Set
    • 14.3.1 Setting the Authentication Login Method
      • 14.3.1.1 show authentication login
      • 14.3.1.2 set authentication login
      • 14.3.1.3 clear authentication login
    • 14.3.2 Configuring RADIUS
      • 14.3.2.1 show radius
      • 14.3.2.2 set radius
      • 14.3.2.3 clear radius
      • 14.3.2.4 show radius accounting
      • 14.3.2.5 set radius accounting
      • 14.3.2.6 clear radius accounting
    • 14.3.3 Configuring RFC 3580
      • 14.3.3.1 show vlanauthorization
      • 14.3.3.2 set vlanauthorization
      • 14.3.3.3 clear vlanauthorization
    • 14.3.4 Configuring TACACS+
      • 14.3.4.1 show tacacs
      • 14.3.4.2 set tacacs
      • 14.3.4.3 show tacacs server
      • 14.3.4.4 set tacacs server
      • 14.3.4.5 clear tacacs server
      • 14.3.4.6 show tacacs session
      • 14.3.4.7 set tacacs session
      • 14.3.4.8 clear tacacs session
      • 14.3.4.9 show tacacs command
      • 14.3.4.10 set tacacs command
      • 14.3.4.11 show tacacs singleconnect
      • 14.3.4.12 set tacacs singleconnect
    • 14.3.5 Configuring 802.1X Authentication
      • 14.3.5.1 show dot1x
      • 14.3.5.2 show dot1x auth-config
      • 14.3.5.3 set dot1x
      • 14.3.5.4 set dot1x auth-config
      • 14.3.5.5 clear dot1x auth-config
    • 14.3.6 Configuring Port Web Authentication (PWA)
      • 14.3.6.1 show pwa
      • 14.3.6.2 set pwa
      • 14.3.6.3 set pwa hostname
      • 14.3.6.4 clear pwa hostname
      • 14.3.6.5 show pwa banner
      • 14.3.6.6 set pwa banner
      • 14.3.6.7 clear pwa banner
      • 14.3.6.8 set pwa displaylogo
      • 14.3.6.9 set pwa redirecttime
      • 14.3.6.10 set pwa ipaddress
      • 14.3.6.11 set pwa protocol
      • 14.3.6.12 set pwa enhancedmode
      • 14.3.6.13 set pwa guestname
      • 14.3.6.14 clear pwa guestname
      • 14.3.6.15 set pwa guestpassword
      • 14.3.6.16 set pwa gueststatus
      • 14.3.6.17 set pwa initialize
      • 14.3.6.18 set pwa quietperiod
      • 14.3.6.19 set pwa maxrequests
      • 14.3.6.20 set pwa portcontrol
      • 14.3.6.21 show pwa session
    • 14.3.7 Configuring MAC Authentication
      • 14.3.7.1 show macauthentication
      • 14.3.7.2 show macauthentication session
      • 14.3.7.3 set macauthentication
      • 14.3.7.4 set macauthentication password
      • 14.3.7.5 clear macauthentication password
      • 14.3.7.6 set macauthentication significant-bits
      • 14.3.7.7 clear macauthentication significant-bits
      • 14.3.7.8 set macauthentication port
      • 14.3.7.9 set macauthentication authallocated
      • 14.3.7.10 clear macauthentication authallocated
      • 14.3.7.11 set macauthentication portinitialize
      • 14.3.7.12 set macauthentication macinitialize
      • 14.3.7.13 set macauthentication reauthentication
      • 14.3.7.14 set macauthentication portreauthenticate
      • 14.3.7.15 set macauthentication macreauthenticate
      • 14.3.7.16 set macauthentication reauthperiod
      • 14.3.7.17 clear macauthentication reauthperiod
      • 14.3.7.18 set macauthentication quietperiod
      • 14.3.7.19 clear macauthentication quietperiod
    • 14.3.8 Configuring Convergence End Points (CEP) Phone Detection
      • 14.3.8.1 show cep connections
      • 14.3.8.2 show cep detection
      • 14.3.8.3 show cep policy
      • 14.3.8.4 show cep port
      • 14.3.8.5 set cep
      • 14.3.8.6 set cep port
      • 14.3.8.7 set cep policy
      • 14.3.8.8 set cep detection-id
      • 14.3.8.9 set cep detection-id type
      • 14.3.8.10 set cep detection-id address
      • 14.3.8.11 set cep detection-id protocol
      • 14.3.8.12 set cep detection-id porthigh | portlow
      • 14.3.8.13 set cep initialize
      • 14.3.8.14 clear cep
    • 14.3.9 Configuring MAC Locking
      • 14.3.9.1 show maclock
      • 14.3.9.2 show maclock stations
      • 14.3.9.3 set maclock enable
      • 14.3.9.4 set maclock disable
      • 14.3.9.5 set maclock
      • 14.3.9.6 set maclock firstarrival
      • 14.3.9.7 set maclock move
      • 14.3.9.8 clear maclock firstarrival
      • 14.3.9.9 set maclock static
      • 14.3.9.10 clear maclock static
      • 14.3.9.11 set maclock trap
      • 14.3.9.12 clear maclock
    • 14.3.10 Configuring Multiple Authentication
      • 14.3.10.1 set multiauth mode
      • 14.3.10.2 clear multiauth mode
      • 14.3.10.3 set multiauth precedence
      • 14.3.10.4 clear multiauth precedence
      • 14.3.10.5 show multiauth port
      • 14.3.10.6 set multiauth port
      • 14.3.10.7 clear multiauth port
      • 14.3.10.8 show multiauth station
      • 14.3.10.9 clear multiauth station
      • 14.3.10.10 show multiauth session
      • 14.3.10.11 show multiauth idle-timeout
      • 14.3.10.12 set multiauth idle-timeout
      • 14.3.10.13 clear multiauth idle-timeout
      • 14.3.10.14 show multiauth session-timeout
      • 14.3.10.15 set multiauth session-timeout
      • 14.3.10.16 clear multiauth session-timeout
    • 14.3.11 Configuring Secure Shell (SSH)
      • 14.3.11.1 show ssh state
      • 14.3.11.2 set ssh
      • 14.3.11.3 set ssh hostkey
      • 14.3.11.4 show router ssh
      • 14.3.11.5 set router ssh
      • 14.3.11.6 clear router ssh
    • 14.3.12 Configuring Access Lists
      • 14.3.12.1 show access-lists
      • 14.3.12.2 access-list (standard)
      • 14.3.12.3 access-list (extended)
      • 14.3.12.4 ip access-group
    • 14.3.13 Configuring Policy-Based Routing
      • 14.3.13.1 show route-map
      • 14.3.13.2 route-map
      • 14.3.13.3 match ip address
      • 14.3.13.4 set next hop
      • 14.3.13.5 show ip policy
      • 14.3.13.6 ip policy route-map
      • 14.3.13.7 ip policy priority
      • 14.3.13.8 ip policy load-policy
      • 14.3.13.9 ip policy pinger
    • 14.3.14 Configuring Denial of Service (DoS) Prevention
      • 14.3.14.1 show hostdos
      • 14.3.14.2 hostdos
      • 14.3.14.3 clear hostdos-counters
    • 14.3.15 Configuring Flow Setup Throttling (FST)
      • 14.3.15.1 show flowlimit
      • 14.3.15.2 set flowlimit
      • 14.3.15.3 set flowlimit limit
      • 14.3.15.4 clear flowlimit limit
      • 14.3.15.5 set flowlimit action
      • 14.3.15.6 clear flowlimit action
      • 14.3.15.7 show flowlimit class
      • 14.3.15.8 set flowlimit port
      • 14.3.15.9 clear flowlimit port class
      • 14.3.15.10 set flowlimit shutdown
      • 14.3.15.11 set flowlimit notification
      • 14.3.15.12 clear flowlimit notification interval
      • 14.3.15.13 clear flowlimit stats
• Index