Entone Technologies 50-0010-CL-WF Dual-band Wi-Fi User Manual

Entone Technologies (HK) Limited Dual-band Wi-Fi

user manual

Product Specification 50-0010-CL-WF IEEE802.11 a/b/g/n 3T3R USB Module Version: 1.0 Date: Aug, 01, 2013
Release History DATE REV Description of Change 2013/08/01 1.0 Initial release
50-0010-CL-WF IEEE802.11a/b/g/n 3T3R USB Module 1. Introduction 50-0010-CL-WF is an integrated the Celeno CLR250 single-chip 2.4GHz / 5GHz IEEE802.11a/b/g/n 3T3R MAC/Baseband/Radio with USB2.0 interface. 50-0010-CL-WF fully complies with IEEE802.11n and IEEE802.11a/b/g/n feature rich wireless connectivity at high standards, delivers reliable, cost-effective, throughput from an extended distance. 2. Features Interoperable with IEEE802.11a/b/g/n WLAN. Reverse direction grant data flow and frame aggregation. Support 195Mbps for 20MHz and 450Mbps for 40MHz channel operations. Wireless multimedia enhancements quality of service support (QoS). Legacy and high throughput modes. Multiple BSSID support. WEP 64/128, WPA, WPA2, TKIP, and AES software encryption. USB2.0 compliant. Low power with advanced power management. Operating systems – Windows XP 32/64,Vista 32/64, Linux, Macintosh. 3. General Specifications Product Specification Model Name 50-0010-CL-WFWLAN Standard IEEE 802.11a/b/g/n, 3T3RHost interface USB2.0 compatible Major Chipset Celeno CLR250 Dimensions Minimum Typical Maximum UnitLength 81 mmWidth 20 mmAntenna Connector 3 Path ipex connector Operating Condition Minimum Typical Maximum Unit Voltage DC 3.15 3.3 3.45 VTemperature -10 70 °CStorage temperature -20 70 °CHumidity Non-Operating 580 %
Electrical Specification Frequency Range 2412 – 2462MHz / 5180 - 5825Modulation BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, and CCK Data Rate 802.11b CCK Mode 11, 5.5, 2, 1 Mbps802.11g OFDM Mode 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n HT20 Mode GI 800ns 6.5 ~195 Mbps MCS 0 ~ MCS 23 802.11n HT20 Mode GI 400ns 7.2 ~216 Mbps MCS 0 ~ MCS 23 802.11n HT40 Mode GI 800ns 13.5 ~ 405Mbps MCS 0 ~ MCS 23 802.11n HT40 Mode GI 400ns 15 ~ 450Mbps MCS 0 ~ MCS 23 Output Tx power 2.4GHz 11b 17dbm +/-1.5dbm 2.4GHz 11g/n 14dbm +/-1.5dbm 5 GHz LOW Band 11dbm +/-1.5dbm 5 GHz Mid Band 10dbm +/-1.5dbm 5 GHz Hi Band 8dbm +/-1.5dbm Rx Sensitivity 2.4GHz 11b < -85dbm 2.4GHz 11g < -73dbm 2.4GHz 11n mcs7 < -70dbm 5 GHz a/n mcs7 < -70dbm Security WEP 64/128, WPA, WPA2, TKIP, and AES software encryption Operating System Compatibility Windows XP 32/64 Windows Vista 32/64 Windows 7 32/64 Linux Ubuntu 4. Mechanical Dimensions The I-PEX connecter is on the top side of the PCB.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: S4A50-0010-CL-WF ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. Verification, Doc) of the host device to be addressed by the integrator/manufacturer. This module must be installed by Entone Technologies (HK) Limited. and XAVi Technologies Corporation, who will retains full control over the final installation of the device into its products, and therefore can assure the compliance of the end product to the tested results.
List of approved antennas No. Ant. Cat. Ant. Type Gain (dBi) 5GHz External PIFA 4.2 4.9 3.6 2.4G External PIFA 4.2 4.2 4.2

Navigation menu