Entone Technologies 99-970201-00 WiFi Dongle User Manual
Entone Technologies (HK) Limited WiFi Dongle
user manual
Kamai 500 Dual-band Wi-Fi Adapter Quick Start Guide Installation 1. Connect the Wi-Fi Adapter to USB port on Kamai 500 Set-Top-Box. 2. Powering up the Kamai. 3. Configure the Kamai to use Wireless Network.* NOTE: Contact your service provider for more details and instructions about the wireless network configuration. What’s Included Kamai 500 Dual-band Wi-Fi Adapter Added Range and Performance For added range and performance, you can turn up the antenna for increased Wi-Fi performance. Quick Start Guide WARNING: The Kamai 500 Dual-band Wi-Fi Adapter should not be installed in Desktop/Notebook Computer. PC/Laptop will not recognized this device when connected to USB port. COPYRIGHT ©2013 Entone, Inc. All rights reserved. Entone,Kamai and “connecting the home” are registered trademarks of Entone, Inc. All other trademarks or registered trademarks belong to their respective owners. P/N: 99-709704-00 - V1.1 NOTE: You may adjust the angle of the antenna for the best performance. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. • FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. •This device will not permit operations on channels 116-128 for 11na and 120-128 for 11a which overlap the 5600 -5650MHz band. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Declaration of Conformity (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communication Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to a different circuit from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. To prevent fire or shock hazard, do not expose this product to rain or moisture. To reduce the risk of electric shock, DO NOT remove the cover or back. No user serviceable parts are inside. For servicing refer to qualified personnel. To ensure proper use of this product, please read this manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location. Declaration of Conformity
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51 Create Date : 2013:07:22 17:11:40+08:00 Metadata Date : 2013:07:22 17:13:33+08:00 Modify Date : 2013:07:22 17:13:33+08:00 Creator Tool : Adobe InDesign CS5.5 (7.5) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 10894 bytes, use -b option to extract), (Binary data 8780 bytes, use -b option to extract) Instance ID : uuid:93ada889-91ef-4459-9270-87d473c3a9b5 Document ID : xmp.did:ED5AEA6A83EEE211B5FFCC992AE38834 Original Document ID : xmp.did:ED5AEA6A83EEE211B5FFCC992AE38834 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved History Instance ID : xmp.iid:ED5AEA6A83EEE211B5FFCC992AE38834, xmp.iid:F35AEA6A83EEE211B5FFCC992AE38834, xmp.iid:F45AEA6A83EEE211B5FFCC992AE38834, xmp.iid:711CDAD990EEE211B5FFCC992AE38834, xmp.iid:721CDAD990EEE211B5FFCC992AE38834, xmp.iid:54E312A4AEF2E211AF64AA8817F2BADC History When : 2013:07:17 09:55:44+08:00, 2013:07:17 11:24:50+08:00, 2013:07:17 11:24:50+08:00, 2013:07:17 11:27:47+08:00, 2013:07:17 11:30:56+08:00, 2013:07:22 17:11:06+08:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 703 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 2 Creator : Adobe InDesign CS5.5 (7.5)EXIF Metadata provided by EXIF.tools