Entrust 506241001 RFID Module User Manual

Entrust Datacard Corporation RFID Module

Contents

User Manual

                                                                                                                                                  Instructions:  79613879  Datacard RFID MODULE 506241 INSTRUCTIONS    1.  The 506241 module is powered by 5.0 vdc  limited power circuit.  2.  It is recommended that a  NSP Semiconductor series CLRC66 controller be  used to monitor the 506241 RFID module  3.  The 506241 module must be mounted in the Datacard device in a vertical position with the antenna down, as shown below.  4.  The 506241 module is to be installed in the Datacard device no more than 10 CM from the supply roll containing the RFID tag.

Navigation menu