EpiCom SER-8189D CDMA 1X EV-DO USB Modem with WLAN User Manual FCC SER 8189

EpiCom Co., Ltd. CDMA 1X EV-DO USB Modem with WLAN FCC SER 8189

User Manual

EPIVALLEY SER-8189 QSG Thank you for purchasing EpiValley SER-8189. Note. - This manu al briefly the preparation, the pr ocess f or installing and saf ety precautions for using SER-8189 router. - You are recommended to read the manual before using the SER-8189. Table of Contents CareandMaintenance‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2Part1.GettingtoknowtheSER‐81891.1PackageContents‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐31.2ConsistsofSER‐8189.‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3Part2.SettinguptheSER‐81892.1Chargingthebattery‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐32.2BatteryTips‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐42.3ExtendingBatteryLife‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐42.4UsingaLANcable‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5Part3.UsingtheSER‐81893.1ConnectingtheSER‐8189‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5.3.2OpeningtheBrowserInterface‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐63.3DeviceActivation(Winodws)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐63.4DeviceActivation(Mac)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐7Part4.TechnicalSpecifications,RegulatoryandSafety‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐84.1LEDOverview‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐84.2TechnicalSpecification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐94.3SafeInformation‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐94.4.Trademarks‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10
24.5Copyright‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10 Care and Maintenance It is normal that your wireless device gets hot when you use it. - Use y our wir eless device and ac cessories with car e and in clean environment. - Keep the wireless device from a fire or a lit cigarette. - Protect your device and accessories from water and vapor and keep them dry. - Do not drop, throw or bend your device. - Clean your device with a piece of damp and soft antistatic cloth. - Do not use any chemical agents (such as alcohol and benzene), chemical detergent, or powder to clean it. - Do not leave your device and accessories in a place with a considerably low or high temperature. - Use only accessories of the wireless device approved by the manufacturer. - Contact the authorized service center for any abnormity of the device or accessories. - Do not dismantle the device or accessories. Otherwise, the device and accessories are not covered by the warranty. Part 1. Getting to know the SER-8189 1.1 Package Contents - EpiValley SER-8189 Mobile Hotspot Router - QSG (Quick Start Guide) - AC-DC Travel Adaptor - Carrying Pouch - Li-ion 1,350mAh battery - RJ45 slot rubber cover - RJ45 Cable(500mm) 1.2 Consists of SER-8189 Power/Reset Button Micro USB port RJ45 LAN Port
3 Part 2. Setting up the SER-8189 2.1 Charging the battery 1. The battery compartment is located on the bottom of the device. Slide open the battery compartment door by f irmly pressing in t he direction of the arrows. 2. Insert the battery by lining up the g old contact points on the battery with the gold contact points in the battery compartment. Then press down gently until the battery is seated. 3. Replace the battery co ver and slide i t closed while pr essing gently until it Air holes
4locks into place. 4. Connect the micro USB end of the A C-DC adapter to the micr o USB port of the device. Note • You must have a fully charged battery the first time you use the SER-8189. • After the first use, you may use the device while it is connected to the AC- DC adapter. • When usin g battery p ower, the dev ice lasts up to 2.5 h ours (when connected to a single device only). • The battery will discharge mor e r apidly as addition al devices ac cess the SER-8189. 2.2 Battery Tips Warning Use only EpiValley approved or EpiValley Wireless approved batteries and chargers with your device. The failure to use a EpiValley approved or EpiValley Wireless-approved battery and charger may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. Battery life depends on th e network, signal strength, temperature, features, and accessories you use. _ If y ou connect your device to y our computer using a USB data cable, the battery will charge. However, the device will not function as a wireless access point while connected to your computer. _ It normally takes at least 3 h ours to fully charge the battery with an AC - DC adapter. _ New batteries or batteries stored for a long time may take more time to charge. _ When charging your battery, keep it near room temperature. _ Never expose batteries to temperatures below 32°F (0°C) or abo ve 113 °F (45 °C). Nev er leav e th e device in an unat tended vehicle due to uncontrollable temperatures that may be outside the desired temperature for this device.
5 _ It is n ormal f or batteri es to gr adually wear down and r equire longer charging times. If y ou notice a chang e in y our bat tery lif e, it is pr obably time to purchase a new battery. 2.3 Extending Battery Life When you are not using the device, push the power button lightly. Then the WiFi LED indicator turns off and SER-8189 turns to Standby mode. If you want to connect WiFi networ k again, push th e power button lightly again. A blue WiFi LED of indicates that SER-8189 is ready to connect. 2.4 Using a LAN cable (RJ45) If you want to connec t to RJ45 LAN cable to the S ER-8189, plug the cable to the RJ45 slot located between Micro USB port and power button. Part 3. Using the SER-8189 3.1 Connecting the SER-8189 When you press the power button: _ The SER-8189 comes on and the power LED lights up. _ A solid green power LED of indicates that the device is charged over 40%. 1. Turn on the SER-8189 ensure your WiFi is enabled on y our PC or laptop . You can view y our available wireless networks by going thr ough the contr ol panel, network connections or system tray (lower rig ht hand c orner of y our screen).
62. Select “EPIVALLEY_SER-8189 XXXX” as your wireless network. Note.Thelast4digits,‘XXXX’oftheSSIDistheendemicnumbersorcombinationofnumbersandletters.YoucanfindthisuniqueSSIDofyourSER‐8189onthelabelattachedinthebacksideoftheSER‐8189.3. Click Connect 4. Open your computer web browser and enter http://10.10.10.254 into the address window and press the Enter key. 3.2 Opening the Browser Interface 1. Open your Web browser and enter http://10.10.10.254/ into the address window. 2. Click Login button on the right top of the br owser. The bel ow pop up message will open to r equire administrative ID & P assword. The def ault ID and Password is admin/admin. Type the administrative ID and password into the Login box and click ok. 3. The Browser Interface screen will open. 3.3 Device Activation (Windows)
7 If your device has not been activated at time of purchase, you must activate now. Before you activate, you need SPC, MDN and MIN from the Carrier providing the service. Click Login button. Then, you will see the pop up sc reen requiring Manual Activation. Activation process consists of 2 steps. ¹ 1st step is to input SPC. Input six ‘000000’ for SPC (the SPC can be unique to the Carri er, c onfirm with y our own Carrier before at tempting to activate) and click Apply. If the Activ ation Code is incorr ect, y ou will be ask ed to try again. If the Activation Code is correct, proceed to the 2nd step. (그림1) ¹ 2nd step is to input MDN and MIN. Input the 10 digit MDN (Mobile Dir ectory Numb er) and MI N (Mobile Identification Number) then click Apply. The MDN an d MIN ar e provided by your carrier. Please contact your carrier for the correct MDN and MIN.  3.4 Device Activation (Mac) 1. Go to Airport Icon at the right upper corner of desktop tap menu and click
8it, Airport on Airport off And make it turn on to search the Wi-Fi networks around your place. Put the cursor on Airport Icon and turn the Airport on as below. (그림4) 2. Choose “Open Network Preferences” on the dr op-down menu and select “EPIVALLEY_SER8189” of your Wi-Fi network and apply it.  Part 4. Technical Specifications, Regulatory and Safety Information 4.1 LED Overview Your device has P ower/Wi-Fi/LAN/CDMA L EDs which pr ovide statu s information about the device and network. LED Color Indicates EpiValley_SER8189
9 1 Power - Power on No Light No power Red Blinking Battery level under 5% Solid Battery level under 20% Orange Solid Battery level under 40% Green Solid Battery level over 40% Power - Power off Orange Solid In charging Green Solid Fully charged No bat tery but connected to AC-DC adapter 2 Wi-Fi No Light Radio Off Blue Solid Radio on 3 LAN No Light Not connected Blue Solid Connected 4. CDMA Red Solid Not connected Green Blinking Activity Solid Connected 4.2 Technical Specification Size (W,D,H) 90mm x 50mm x 15mm (3.54 x 1.97 x 0.59 inch) Weight About 70g (2.47 oz) Memory Flash : 4M Bytes / SDRAM : 16M Bytes RF Band CDMA 800/1900MHz Dual Band Support Wi-Fi 2.4GHz Band Support Data Rate CDMA : 3.1Mbps downlink / 1.8Mbps uplink Wi-Fi : 54Mbps Operating temperature -30°C to 50°C Humidity 5 ~ 95% Storage Temperature -30°C to 50°C Operating time Running time : 2.5Hrs (When fully charged) Standby time : 7.5Hrs LED indicators Power / Wi-Fi / LAN / CDMA Battery and charging Li-ion 1,350mAh, 3.7V, Rechargeable Power AC-DC Power Adaptor 5V/2A
10 Regulatory Information (FCC Statement) FCC Equipment Authorization ID: R2NSER-8189D This device complies with Part 15 of the FCC Rules. Operation is subject to the f ollowing two conditi ons: (1) this device ma y not cau se harmf ul interference, and (2) this device must acc ept an y interference received, including interference that may cause undesired operation. * This d evice should be installed and operated with a minimum d istance of 1 cm between the radiator and your body when using it via USB cable. 4.3 Trademarks EpiValley and the logo are trademarks of EpiValley. EpiValley Co., Ltd, SER-8189, and the EpiValley Co., Ltd logo ar e trademarks of EpiValley Co., Ltd. Windows is a registered trademark of Microsoft Corporation. 4.4 Copyright ⓒ2010 EpiValley. EpiValley and the logo are trademarks of EpiValley. Other marks are the property of their respective owners. WARNING: This equi pment may generate or use radio frequency energy. Changes or mod ifications to this equipment may cau se harmful interference unless the modifications are expressly approv ed in the instruction manual . Th e user coul d lose the authority to operate thi s equipment if an unauthorized change or modification is made. Information to User This equipme nt has been tested and fo und to compl y with the limits for a Class B digital device, pur suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection again st harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency en ergy and, if not installed and u sed in acc ordance with the instructions, may c ause harmful interference to radio c ommunications. However, there is no guarantee that interference will not occur in a particular installation. I f this equipm ent does c ause h armful interference to radio or television reception, which can be deter mined by turning the equipment off and on, th e user is enc ouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenn a.- Increase the separ ation between the equipment and receiver. - Conn ect th e equipment into an outlet on a circuit different fr om th at to which the receiver is connected. - Consult the dealer or an experienced radio/ tv technician for help.

Navigation menu