EpiCom SER-8189D CDMA 1X EV-DO USB Modem with WLAN User Manual FCC SER 8189
EpiCom Co., Ltd. CDMA 1X EV-DO USB Modem with WLAN FCC SER 8189
EpiCom >
User Manual
EPIVALLEY SER-8189 QSG
Thank you for purchasing EpiValley SER-8189.
Note.
- This manu al briefly the preparation, the pr ocess f or installing and saf ety
precautions for using SER-8189 router.
- You are recommended to read the manual before using the SER-8189.
Table of Contents
CareandMaintenance‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2
Part1.GettingtoknowtheSER‐8189
1.1PackageContents‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3
1.2ConsistsofSER‐8189.‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3
Part2.SettinguptheSER‐8189
2.1Chargingthebattery‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3
2.2BatteryTips‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4
2.3ExtendingBatteryLife‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4
2.4UsingaLANcable‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5
Part3.UsingtheSER‐8189
3.1ConnectingtheSER‐8189‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5.
3.2OpeningtheBrowserInterface‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐6
3.3DeviceActivation(Winodws)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐6
3.4DeviceActivation(Mac)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐7
Part4.TechnicalSpecifications,RegulatoryandSafety
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐8
4.1LEDOverview‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐8
4.2TechnicalSpecification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐9
4.3SafeInformation‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐9
4.4.Trademarks‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10
2
4.5Copyright‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10
Care and Maintenance
It is normal that your wireless device gets hot when you use it.
- Use y our wir eless device and ac cessories with car e and in clean
environment.
- Keep the wireless device from a fire or a lit cigarette.
- Protect your device and accessories from water and vapor and keep them
dry.
- Do not drop, throw or bend your device.
- Clean your device with a piece of damp and soft antistatic cloth.
- Do not use any chemical agents (such as alcohol and benzene), chemical
detergent, or powder to clean it.
- Do not leave your device and accessories in a place with a considerably
low or high temperature.
- Use only accessories of the wireless device approved by the manufacturer.
- Contact the authorized service center for any abnormity of the device or
accessories.
- Do not dismantle the device or accessories. Otherwise, the device and
accessories are not covered by the warranty.
Part 1. Getting to know the SER-8189
1.1 Package Contents
- EpiValley SER-8189 Mobile Hotspot Router
- QSG (Quick Start Guide)
- AC-DC Travel Adaptor
- Carrying Pouch
- Li-ion 1,350mAh battery
- RJ45 slot rubber cover
- RJ45 Cable(500mm)
1.2 Consists of SER-8189
Power/Reset Button
Micro USB port
RJ45 LAN Port
3
Part 2. Setting up the SER-8189
2.1 Charging the battery
1. The battery compartment is located on the bottom of the device.
Slide open the battery compartment door by f irmly pressing in t he direction
of the arrows.
2. Insert the battery by lining up the g old contact points on the battery with
the gold contact points in the battery compartment. Then press down gently
until the battery is seated.
3. Replace the battery co ver and slide i t closed while pr essing gently until it
Air holes
4
locks into place.
4. Connect the micro USB end of the A C-DC adapter to the micr o USB port
of the device.
Note
• You must have a fully charged battery the first time you use the SER-8189.
• After the first use, you may use the device while it is connected to the AC-
DC adapter.
• When usin g battery p ower, the dev ice lasts up to 2.5 h ours (when
connected to a single device only).
• The battery will discharge mor e r apidly as addition al devices ac cess the
SER-8189.
2.2 Battery Tips
Warning
Use only EpiValley approved or EpiValley Wireless approved batteries
and chargers with your device.
The failure to use a EpiValley approved or EpiValley Wireless-approved
battery and charger may increase the risk that your device will
overheat, catch fire, or explode, resulting in serious bodily injury,
death, or property damage.
Battery life depends on th e network, signal strength, temperature, features,
and accessories you use.
_ If y ou connect your device to y our computer using a USB data cable, the
battery will charge. However, the device will not function as a wireless access
point while connected to your computer.
_ It normally takes at least 3 h ours to fully charge the battery with an AC -
DC adapter.
_ New batteries or batteries stored for a long time may take more time to
charge.
_ When charging your battery, keep it near room temperature.
_ Never expose batteries to temperatures below 32°F
(0°C) or abo ve 113 °F (45 °C). Nev er leav e th e device in an unat tended
vehicle due to uncontrollable temperatures that may be outside
the desired temperature for this device.
5
_ It is n ormal f or batteri es to gr adually wear down and r equire longer
charging times. If y ou notice a chang e in y our bat tery lif e, it is pr obably
time to purchase a new battery.
2.3 Extending Battery Life
When you are not using the device, push the power button lightly.
Then the WiFi LED indicator turns off and SER-8189 turns to Standby mode.
If you want to connect WiFi networ k again, push th e power button lightly
again. A blue WiFi LED of indicates that SER-8189 is ready to connect.
2.4 Using a LAN cable (RJ45)
If you want to connec t to RJ45 LAN cable to the S ER-8189, plug the cable
to the RJ45 slot located between Micro USB port and power button.
Part 3. Using the SER-8189
3.1 Connecting the SER-8189
When you press the power button:
_ The SER-8189 comes on and the power LED lights up.
_ A solid green power LED of indicates that the device is charged over 40%.
1. Turn on the SER-8189 ensure your WiFi is enabled on y our PC or laptop .
You can view y our available wireless networks by going thr ough the contr ol
panel, network connections or system tray (lower rig ht hand c orner of y our
screen).
6
2. Select “EPIVALLEY_SER-8189 XXXX” as your wireless network.
Note.
Thelast4digits,‘XXXX’oftheSSIDistheendemicnumbersorcombinationof
numbersandletters.YoucanfindthisuniqueSSIDofyourSER‐8189onthelabel
attachedinthebacksideoftheSER‐8189.
3. Click
Connect
4. Open your computer web browser and enter
http://10.10.10.254
into the
address window and press the
Enter
key.
3.2 Opening the Browser Interface
1. Open your Web browser and enter
http://10.10.10.254/
into the address
window.
2. Click
Login
button on the right top of the br owser. The bel ow pop up
message will open to r equire administrative ID & P assword. The def ault ID
and Password is admin/admin.
Type the administrative ID and password into the Login box and click ok.
3. The Browser Interface screen will open.
3.3 Device Activation (Windows)
7
If your device has not been activated at time of purchase, you must activate
now.
Before you activate, you need SPC, MDN and MIN from the Carrier providing
the service.
Click
Login
button. Then, you will see the pop up sc reen requiring Manual
Activation.
Activation process consists of 2 steps.
¹ 1st step is to input SPC. Input six ‘000000’ for SPC (the SPC can be unique
to the Carri er, c onfirm with y our own Carrier before at tempting to
activate) and click
Apply.
If the Activ ation Code is incorr ect, y ou will be ask ed to try again. If the
Activation Code is correct, proceed to the 2nd step.
(그림1)
¹ 2nd step is to input MDN and MIN.
Input the 10 digit MDN (Mobile Dir ectory Numb er) and MI N (Mobile
Identification Number) then click
Apply.
The MDN an d MIN ar e provided by
your carrier. Please contact your carrier for the correct MDN and MIN.
3.4 Device Activation (Mac)
1. Go to Airport Icon at the right upper corner of desktop tap menu and click
8
it,
Airport on Airport off
And make it turn on to search the Wi-Fi networks around your place.
Put the cursor on Airport Icon and turn the Airport on as below.
(그림4)
2. Choose “Open Network Preferences” on the dr op-down menu and select
“EPIVALLEY_SER8189” of your Wi-Fi network and apply it.
Part 4. Technical Specifications,
Regulatory and Safety Information
4.1 LED Overview
Your device has P ower/Wi-Fi/LAN/CDMA L EDs which pr ovide statu s
information about the device and network.
LED Color Indicates
EpiValley_SER8189
9
1
Power
- Power on
No Light No power
Red
Blinking Battery level under 5%
Solid Battery level under 20%
Orange Solid Battery level under 40%
Green Solid Battery level over 40%
Power
- Power off
Orange Solid In charging
Green Solid
Fully charged
No bat tery but connected to
AC-DC adapter
2 Wi-Fi
No Light Radio Off
Blue Solid Radio on
3 LAN
No Light Not connected
Blue Solid Connected
4. CDMA
Red Solid Not connected
Green
Blinking Activity
Solid Connected
4.2 Technical Specification
Size (W,D,H) 90mm x 50mm x 15mm (3.54 x 1.97 x 0.59 inch)
Weight About 70g (2.47 oz)
Memory Flash : 4M Bytes / SDRAM : 16M Bytes
RF Band
CDMA 800/1900MHz Dual Band Support
Wi-Fi 2.4GHz Band Support
Data Rate
CDMA : 3.1Mbps downlink / 1.8Mbps uplink
Wi-Fi : 54Mbps
Operating temperature -30°C to 50°C
Humidity 5 ~ 95%
Storage Temperature -30°C to 50°C
Operating time
Running time : 2.5Hrs (When fully charged)
Standby time : 7.5Hrs
LED indicators Power / Wi-Fi / LAN / CDMA
Battery and charging Li-ion 1,350mAh, 3.7V, Rechargeable
Power AC-DC Power Adaptor 5V/2A
10
Regulatory Information (FCC Statement)
FCC Equipment Authorization ID: R2NSER-8189D
This device complies with Part 15 of the FCC Rules. Operation is subject to
the f ollowing two conditi ons: (1) this device ma y not cau se harmf ul
interference, and (2) this device must acc ept an y interference received,
including interference that may cause undesired operation.
* This d evice should be installed and operated with a minimum d istance of
1 cm between the radiator and your body when using it via USB cable.
4.3 Trademarks
EpiValley and the logo are trademarks of EpiValley.
EpiValley Co., Ltd, SER-8189, and the EpiValley Co., Ltd logo ar e trademarks
of EpiValley Co., Ltd.
Windows is a registered trademark of Microsoft Corporation.
4.4 Copyright
ⓒ2010 EpiValley. EpiValley and the logo are trademarks of EpiValley.
Other marks are the property of their respective owners.
WARNING: This equi pment may generate or use radio frequency
energy. Changes or mod ifications to this equipment may cau se harmful
interference unless the modifications are expressly approv ed in the
instruction manual . Th e user coul d lose the authority to operate thi s
equipment if an unauthorized change or modification is made.
Information to User
This equipme nt has been tested and fo und to compl y with the limits for a
Class B digital device, pur suant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection again st harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency en ergy and, if not installed and u sed in acc ordance with the
instructions, may c ause harmful interference to radio c ommunications.
However, there is no guarantee that interference will not occur in a particular
installation. I f this equipm ent does c ause h armful interference to radio or
television reception, which can be deter mined by turning the equipment off
and on, th e user is enc ouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenn a.- Increase the separ ation
between the equipment and receiver.
- Conn ect th e equipment into an outlet on a circuit different fr om th at to
which the receiver is connected.
- Consult the dealer or an experienced radio/ tv technician for help.