EpiCom SXP-2080 CDMA 2000 1x WLL Terminal User Manual R2NSXP 2080
EpiCom Co., Ltd. CDMA 2000 1x WLL Terminal R2NSXP 2080
EpiCom >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 728611 |
| Application ID | +d7qpFkJ+IhzVr53y+R4WQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 25.95kB (324401 bits) |
| Date Submitted | 2006-11-15 00:00:00 |
| Date Available | 2006-12-30 00:00:00 |
| Creation Date | 2006-11-09 22:10:27 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2006-11-09 22:10:27 |
| Document Title | Microsoft Word - User manual_R2NSXP-2080.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Harveysung |
02/15/06 Draft by Daniel Yu
SXP-2080 CDMA 1XRTT
FIXED WIRELESS PHONE
800 MHz CDMA
TECHNICAL MANUAL
CDMA FWP SXP-2080
Technical & User Manual
Before installing your SXP-2080, carefully remove the contents from the shipping carton and check
for evidence of shipping damage. If damage is found, contact your Authorized Sungil Distributor or
shipping agent immediately.
SAFE OPERATION INSTRUCTIONS
IMPORTANT! Before installing or operating this product, read the SAFETY AND GENERAL INFORMATION
section of this guide.
9 Install the unit indoors.
9 Install the unit on a hard, flat surface for proper ventilation.
9 Do not expose the unit to rain or moisture
9 Do not place the unit on or close to sources of heat.
IMPORTANT NOTICES
TERMS AND CONDITIONS FOR USE OF SXP-2080 PRODUCTS ("Product")
These Terms and Conditions are a legal contract between you and Sungil Corporation for the title to and use of
the Product.
BY RETAINING AND USING THE PRODUCT AFTER RECEIPT OF IT, YOU AGREE TO THE TERMS AND
CONDITIONS INCLUDING WARRANTY DISCLAIMERS, LIMITATIONS OF LIABILITY AND
INDEMNIFICATION PROVISIONS BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS,
DO NOT USE THE PRODUCT AND IMMEDIATELY RETURN THE UNUSED PRODUCT FOR A COMPLETE
REFUND. You agree to accept sole responsibility for any misuse of the Product by you; and, in addition, any
negligent or illegal act or omission of your or your agents, contractors, servants, employees, or other users of
the Product so long as the Product was obtained from you, in the use and operation of the Product.
Sungil Telecom Ltd.
Corporate Headquarters
321 Gongdan-dong, Gumi City, Kyongbuk
730-030, Korea
Sales and Technical Support
Tel: +82-31-714-0038 · Fax: +82-31-714-9174
E-mail: sales@sungiltel.com · http://www.sungiltel.com
2006 Sungil Telecom Co. Ltd., All Rights Reserved
CDMA FWP SXP-2080
Technical & User Manual
Emergency Battery Backup
Each Subscriber SXP-280 Unit comes with a standard internal battery inside, and can be replaced at your
local After-Service Centers.
SXP-2080 OPERATION
SXP-2080’s UI (User Interface) operation is driven by Soft Key which is designated at ① and ② in below
picture. ① And ② Keys have different functions linked with what Main LCD displays. For an example, If LCD
has IDLE screen,① key has Menu key to get into the main menu by pressing it and ② key is not used. After
you got into the specific menu, ① key is changed to OK key which is able to confirm something in menu and ②
key is changed to CLR key to exit current menu item.
Navigation Key Operation
⑤ And ⑥ keys it is basically used at navigation keys from standby condition, and it is used with each function
of ‘Dialed Numbers’ and ‘Volume control’ item.
If it presses as the lower picture the ⑤key from standby condition and you can show to the dialed numbers.
CDMA FWP SXP-2080
Technical & User Manual
Press the up navigation key in standby
condition, you can show to the dialed
numbers
And it presses as the lower picture the ⑥key from standby condition and we can adjust the speaker,key beep
or earpiece volume on which it depend the condition of hook on/off.
Press the down navigation key in standby
state, you can control to the volume depend
on hook on/off.
Power On/Off Operation
③ Power key is using to turn it on/off when a battery is used as power source. If AC power supplies to the
product, a power key is not required but in case of battery mode, you should turn it on and off with this
power key.
1) AC power thru the adapter.
If you press ③ Power key for around 2 seconds under AC power mode, The phone inform you of a
message,“Can’t turn off on AC state”.
2) Battery power without the adapter
If you press ③ Power key for around 2 seconds in a while a phone is working, The message of “Press Ok Key
for Tuning Off!” will display and then If you press OK soft key , the phone will turn it off. Otherwise, you can turn
it on by same method with turned-off phone.
Signal Strength Indicator
RSSI (Receive Signal Strength Indicator) –
This product’s RSSI indicator is located at left side on LCD. RSSI Level expresses current signal strength in 3
bars. If you are in no service area, Just base station icon displays and there is no level in RSSI indicator.
CDMA FWP SXP-2080
Technical & User Manual
RSSI Indicator
Battery Indicator
Battery Strength Indicator
This product’s battery level indicator is located at right side on LCD. Battery Level expresses battery levels with
3 bars. In case of low battery, Just battery icon displays and there is no level in battery indicator.
When a battery level is low level, “Low Battery Warning!” displays and warning tone sounds and a phone will
get into shutdown mode.
Over Voltage Protection
This product’s rated voltage is 5V but if you use over 5V, “Over Voltage! Check Power” message displays and
warning beep tone sounds continuously until you take off this unrated voltage power.
Basic Phone Function
Placing a Call
1) Pick up the handset and listen for a dial tone.
2) Dial the phone number.
Receiving a Call
When your telephone rings, pick up the handset and begin talking.
NOTE: If you hear an incoming call while picking up the handset, you can receive the call by hanging up (placing the
handset on the cradle) immediately. This will cause the phone to start ringing.
Ending a Call
Hang up the phone (place the handset onto the cradle).and Press the speaker key.
Make a Call
You can see “Call” soft key while you are dialing the phone number. You can immediately make call when you press button
located at blue circle as below picture.
CDMA FWP SXP-2080
Technical & User Manual
Speed Dial
Speed Dial allows you to use the Speed Dialing feature.
You can press the desired number for 2 seconds; gently press the number button longer.
Then the phone makes a previously programmed and stored a phone number.
Speed Dial can be also used for two digits numbers like “12” and “79”.
For example, if the a number is stored at Speed Dial “15”, then press “1” first, and press “5”
for 2 seconds ( a bit longer).
Redial
Press the navigation up key, the phone will show all dialed calls from call history register. If you choose to call the number
other than your most recent call, then you can use.
Emergency Dial
You can place emergency call from your emergency number list even if your phone is locked. For more details see others
menu, Emergency Numbers.
User Care Dial
You can place usercarecall from your emergency number list even if your phone is locked. For more details see others menu,
usercare Numbers.
Function used during a call
1) Mute
This feature allows you to mute the caller during a call. It is useful when you do not want your caller to listen to what you
have to say for that muted period.
2) Phone Book
During a call, you can access your Phone Book for a search and view your list of stored entries.
3) Message
During a call, you can access your message (SMS) for write and view your list of stored entries.
Important Tones and Alerts
Normal Dial Tone - When cellular service is available, the receiver emits a standard (steady) dial tone.
No Service Tone - A fast beeping tone indicates that no cellular service is available.
Outgoing Call Restriction - A slower beeping is an indication that calls may be received, but not made, from this
particular phone.
SUPPLEMENTARY FEATURES (NETWORK DEPENDENT)
Call Waiting
Call Waiting enables you to be alerted to an incoming call while you are already on a call. You have
the option of responding to the second call while putting the first call on hold. You can also disable
the call waiting option during a particular call. Contact your service provider to activate Call Waiting.
Three-Way Calling
Three-Way Calling enables you to set up a three-way conversation with two other different-numbered users. Contact your
service provider to activate Three-Way Calling. To use Three-Way calling, use the following steps:
1. Call 1st party
2. While in call with 1st party, dial the number of the 2nd party
3. Press hook switch (or Flash Softkey button)
4. When connected to 2nd party, press the hook switch (or the Flash Softkey button) again to connect all parties.
Call Forwarding
Call Forwarding enables you to forward all your incoming calls to another phone number, even if your telephone is turned
off. You can continue to make calls from your telephone when Call Forwarding is activated. Contact your service provider
to activate Call Forwarding.
Caller ID
Caller ID notifies you who is calling by displaying the caller's number on the telephone's display when an incoming call
comes through with a ring. This feature is available only with a telephone that has an LCD display on it. Contact your
service provider to activate Caller ID.
CDMA FWP SXP-2080
Technical & User Manual
Menu Tree
Press the “Menu” softkey button.
Menu key operation in IDLE state.
1. Phone book
1. Find
1. All
2. Name
3. Number
2. Add
3. Call Info
2. Message
4. My Phone Number
1. Write
2. Inbox ( 0/ 0 )
3. Outbox ( 0 )
4. Voice Mail ( 0 )
5. Erase Msgs
6. Msg Settings
3. Profile
1. Security (0000)
2. Display
3. Hotline
4. Sound
4. Auto Time Out
5. Call Time Display
1. Ring Tone
2. Vol Control
1. Dialed
2. Received
3. Missed
4. Erase
5. Duration
1. Inbox (0/0)
2. Outbox (0)
3. All Msgs
1. Msg Lock
2. Msg Alert
3. Voice Mail No
4. Auto Delete
1. New Code
2. Restrict
3. Reset Phone
4. Auto Lock
5. Voice Privacy
1. Greeting
2. Date&Time
1. SetUp
2. TimeSet
1. Ringer Vol
2. Key Vol
3. Earpiece Vol
4. Speaker Vol
3. DTMF Tone
4. SVC Alert
5.Stop Watch
6.Alarm
0. Hidden Menu
1. Alarm Set
2. Alarm Tone
3. Snooze Time
1. System Info
2. Audible Tone
3. Others
1. Debug Screen
2. Test Call
1. Emergency
2, User Care Number
3. Mirroring
Menu key On Conversation
0. Security
1. Voice Privacy
2. DTMF Tone
1. Mute
2. PhoneBook
3. Message
CDMA FWP SXP-2080
Technical & User Manual
Explain on Menu Tree
0. Hidden Menu
1. System Info
1. Debug Screen
If you choose the debug screen, you can show to the information of RSSI, Ec/Io,Rx/Tx Power.
Ex) S 14846 (S:System ID) C 0283 (C:Channel)
N 00001(N:Network ID)
R 100 (R:RSSI / dBm) E 05 (E:Ec/Io)
PN 122
Tx -73 (Tx power dBm)
1. System Info
In the Test call mode, you can call as below.
1. new 8k Markov,
2. new 13k Markov,
3. 8k loopback,
4. 13k loopback
5. SO54 Markov,
6. SO55 loopback
2. Test Call
2. Audible Tone
There is 4-type of dial tone type for country.
1. Korea
2. Latin America
3. East Europe
4. China / Siria
5. Nicaragua
6.
India
3. Others Menu (Lock Code : 175930 )
1. Emergency #(Number)
The emergency number can input maximum by 3 and limited area in country.
1.
2.
3.
4.
Press the ‘Edit’ Softkey
Enter the emergency number
Press the navigation key, You can show the other number of emergency.
Press the ‘Save’ softkey. And Saving the emergency number.
3. Others Menu (Lock Code : 175930 )
2. User Care #(Number)
The usercare number can input maximum by 3 and limited area in country.
1.
2.
3.
4.
Press the ‘Edit’ Softkey
Enter the user care number
Press the navigation key, You can show the other number of user care.
Press the ‘Save’ softkey. And Saving the user care number.
3. Others Menu (Lock Code : 175930 )
3. Mirroring
In the Mirroring menu, you can backup/restore system configuration of phone.
1. Press the navigation key you can show the option of mirroring that kind of ‘Do mirroring’ or ‘Do Restore’
2. It choose the item (Do Mirroring or Do Restore)
3. Press the ‘Ok’ softkey, Runing the mirroring function
CDMA FWP SXP-2080
Technical & User Manual
1. Phone Book Menu
The Phone Book allows you to store frequently used phone numbers and the associated names in your personal directory to
make it easy for you to make a call without remembering or entering the phone number. You can store up to 99 entries. Each
entry can contain up to 32 digits (numbers), with an associated name of up to 14 characters.
1. Phone Book
1. Find
In this menu, you can search Phone Book for an entry using a name, entry number, and group name. Example, by
“Name”: This option allows you to find an entry by entering a person’s name.
1. Phone Book
2. Add
You can also add any numbers from Call History or create an entry to Phone Book.
Simply press type your entry and press ‘Save’ softkey at the end. With each entry
created, you will be asked to put a name, a number, a speed dialing, and a
distinctive Ring Tone to each entry
1. Phone Book
3. Call Info
You can use the Call History menu to:
1. View and dial the most recent calls you dialled, received, or missed.
2. Erase the numbers in the call log memory
3. View the time duration of calls
I.
II.
III.
IV.
V.
Dialed
The phone stores up to 20 of the most recent calls you dialed, When you access this menu, a list of the
dialed calls displays
Recceived
This option lets you view up to 20 of the most recent calls you received, (along with Caller ID) if you are
subscribed to the Caller Line Identification service. Contact service provider for more information about
this service. When you access this menu, a list of the incoming calls displays.
Missed
If Caller Line Identification is available, your phone keeps a list of the most recent 20 incoming calls that
you failed to answer.
Erase
This feature erases all call logs from Dialled/Received/Missed
Duration
Note: This feature is not intended to be used for billing purposes.
The following options are available:
- Last Call Time
This information shows about the last call, such as the duration of the call,
the other person’s phone number and the date and time when the call was made.
- All Dialled
This information shows the number of all calls you have made and the total
duration of the calls since the time counter was last set to zero by using ‘Clr Air Time’
1. Phone Book
4. My Phone No# (Number)
Enter this menu to check your phone number (MIN)
2. Message Menu
Your phone can send and receive text messages. It can also receive voice mail notifications. When the phone receives a
message, an alert sounds and a text notification displays along with the name and phone number of the sender, if available.
The ‘Message icon’ remains on the screen at standby time until you read the new text messages or you listen to the new
voice mail messages. Messages are received even when your phone is in Lock mode.
2. Message
1. Write
You can create a text message of up to 160 characters and send it to other mobile phones and FWP’s
1. Enter the send phone number
2. Enter the text message
3. When you finish entering text. Press the ‘OK’ softkey
4. Select your Message Priority from Normal, Emergency, or Urgent and then press the ‘Ok’ softkey.
5. Select whether you want Delivery ACK (Delivery Acknowledgement) for your message and then press the ‘Ok’
softkey.
Select the option (Send, Send&Save) and then press the ‘OK’ softkey to send the message.
CDMA FWP SXP-2080
Technical & User Manual
2. Message
1. InBox ( 0 / 0 )
When you receive a text message, the message indicator appeared on the LCD screen at standby time. While
reading the message, scroll down to the navigation key to view the list of message options, then press appropriate
keys to choose the desired option
In box sub’s menu
1.
2.
3.
4.
Reply
Use this feature to reply your message.
Forward
Use this feature to forward your message. Enter the number for forwarding, and then confirm the message
you are sending, or edit your message. ‘Ok” softjey to send the message.
Store Number
Use this feature to save the number on your display. With Caller ID feature, the phone will take user’s
number into the Phone Book. You can edit your number here, as well as
Erase
Erase the message from your Inbox.
Read Messages Later
Your Inbox will show how many messages are unread out of total messages in Inbox. For example, if there are 3
unread messages in Inbox among 17 messages, then Inbox will show “Inbox (3/17)”
2. Message
2.OutBox ( 0 )
Your Outbox stores your sent messages to your friends and associates. It also stores all of your unsent messages if
messages were not sent at the time due to Network Failures. All sent messages can be found here in Outbox
2. Message
3.VoiceMail ( 0 )
When there is a voice mail, there will be an alert. An alert window displays the number of messages on the system,
and the time it is received. Press Send to call the caller who left the voice mail or Press Msg to view the Voice Mail
System Center number. Press Send to connect to Voice Mail System Center
2. Message
4.Erase Msgs
Erase your Messages in your Inbox, Outbox or erase all messages. You can select first and press STR to erase your
messages.
2. Message
Msg Lock
5.Msg Settings
This feature protects accessing Message Menu. You can enable the Message Lock by entering a Message Lock Code
when prompted.
Msg Alert
This feature turns Message Alert Window On or Off. Message Alert Window is displayed when you receive a message
to the phone, displaying time, and CID with an alert. You may use this feature to turn your alert off. Message Alert is
turned on as a factory default
Voice Center
In this feature you will find your operator’s voice mail center number programmed. Press Send to access your Voice
Mail Box on the network.
Auto Delete
This feature will automatically delete the oldest item as your Inbox is full. This useful feature will eliminate the oldest
item in your Inbox, as the new message comes in. Press STR to turn this feature on. Auto Delete feature is off as
factory default
CDMA FWP SXP-2080
10
Technical & User Manual
3. Profile Menu
3. Profile
1.Security – 1. New Code
Your phone prompts you for a four-digit security code for certain features and commands. Access is granted only after
correct security code has been entered successfully. The default security code is “0000”. It is recommended that you
can change this code at once, write it down, and store it in a safe place away from your phone. Change your Code to
New Code
1.
2.
3.
4.
Press ‘Menu’ and ‘Security’, then to new code
Enter the existing (or default) security code and press ‘Ok’ softkey
Enter the new four-digit security code and press ‘Ok’ softkey
Reenter the new four-digit security code and press ‘Ok’ softkey
3. Profile
1.Security – 2. Restrict – 1.Dialed Num#
This feature allows you to restrict dialed calls. You can restrict all calls or create a custom list of numbers to restrict
1. Press ‘Menu’ and select profile, security and restrict
2. Select form dialed Number
3. Select the option ( Cancel or Restrict ) with your navigation Up/Down keys, and press…
3. Profile
1.Security – 2. Restrict – 2.Received Num#
This feature allows you to restrict received calls. You can restrict all calls or create a custom list of numbers to restrict
1. Press ‘Menu’ and select profile, security and restrict
2. Select form Received Number
3. Select the option ( Cancel or Restrict ) with your navigation Up/Down keys, and press…
3. Profile
1.Security – 3.Reset Phone
This feature is useful when the user wants to reset the phone to a factory default. Resetting the phone will not erase
Phone Book, Call History, Inbox and Outbox
3. Profile
1.Security – 4.Auto Lock
This feature protects your phone from unauthorized outgoing calls or unthorized access to information stored in the
phone. When phone lock is activated, phone locked is displayed each time you turn your phone On/Off. After
pressing either contacts or Menu, you must enter your lock code. Once your lock code has been accepted, your
phone will function normally
1.
2.
Press ‘Menu’ and select profile, security and auto lock
Select the option ( Never, on power up, now, always ) with your navigation Up/Down keys, and press…
3. Profile
1.Security – 5.Voice Privacy
This feature protects the conversation between callers. If you have requested Enhanced Voice Privacy Mode to your
operator, and that your operator supports this Voice Privacy mode, the phone will encode the conversation and protect
the contents. You can choose from the modes “Standard” or “Enhanced”,
Factory Default will come as “Standard”.
3. Profile
2.Display – 1.Greeting
In this feature, you can personalize your Banner Setting. Please enter texts to show Banner on display when the
phone is in idle mode. You can put text up to 14 characters
1.
2.
Press ‘Menu’ and select profile, display and greeting
Press the ‘Edit’ softkey, you can modify and create the greeting message
3. Profile
2.Display – 2.Date/Time
This feature allows the user to choose different formats of time to be displayed on the idle screen
Data Time display can be chosen from
1. AM/ PM Type
2. 24 Hours Type
3. Day of Week Type
4. No Time&Date
Factory Default is the ‘Day of Week’ type
CDMA FWP SXP-2080
11
Technical & User Manual
3. Profile
3.Hotline – 1.SetUp
This feature is used when there is an emergency situation that has to be made within specific time frame. Hotline,
when it is turned on, will automatically call the designated Hotline Number within previously selected Hotline Time.
When the phone is on Off-Hook for selected Hotline Time, then the phone will call Hotline
This feature automatically dials a specific number at hotline time.
1. Press the ‘Menu’ and select profile, hotline and SetUp.
2. Select the option On or Off with your navigation Up/Down keys, and press…
3. if you choose the option to ‘On’, and input a dial number for emergency.
4. if you choose the option to ‘Off’, the feature disabled at standby state.
5. Factory default is ‘Off’
3. Profile
3.Hotline – 2.TimeSet
This feature sets the time of Hotline waiting time from Off-Hook to Hotline Dialing. Range is from 0~15 seconds of
waiting time. For example, if the phone is set at “0” seconds waiting time, the phone will automatically call the Hotline
Number.
3. Profile
4.Auto Time Out
After an user entered numeric digits for dialing, the phone will automatically call the number that was entered for
certain period of time. For example, if a user enters a phone number and waits for 4 seconds, without pressing ‘Call’
softkey then the phone will automatically time out, and call the entered number. Choose from 1 – 10 seconds for Auto
Timeout.
Factory Default is at 4 seconds
3. Profile
5.Call Time Display
This feature show to the call time on conversation, if it disabled the option to ‘Off’, it did not show to the call time on
conversation state.
1. Press the ‘Menu’ and select profile and CallTimeDisp
2. Select the option On or Off with your navigation Up/Down keys, and press…
3. Factory default is ‘On’
3. Profile
6.Setting – 1.Version
This feature show to the version of S/W, H/W and PRL ID,
1. Press the ‘Menu’ and select profile, Setting and vesion
2. First you can show to the S/W Version
3. Press the ‘More’ softkey and you can show to the H/W revision and PRL ID
Ex) S/W:
H/W:
PRL:
PBINDT1NR0013N
0.3 Î Board Revision
- no info Æ it’s mean not exist the PRL, if it exist the PRL data, you can show to the PRL id.
4. Sound Menu
You can use the Sound menu to customize various sound settings, such as ringer volume, type, and tone, DTMF length.
4. Sound
1.Ring Tone
This menu allows you to set the unique ring tone for any incoming calls that are not set from Phone Book. This Ring
Tone is the primary default Ring Tone of the phone.
1.
2.
3.
Press the ‘Menu’ and sound and Ring Tone
Select the polyphony bell in the list of follows.
Poli Bell 1 - 10
Can Can,Willianmtel,Carnen
Trumpet,Turkey, Waltz of Sprin
Trout, Minuet, Heart of Woman,
Prelude, Waltz of Puppy, Mozart Minuet,
Elysee, Triump, Canon,
Factory default is Poli Bell 1
CDMA FWP SXP-2080
12
Technical & User Manual
4. Sound
2.Vol Control
This menu allows you to adjust the volume of the phone. There are total of 5 volume levels, from silent, 1, 2, 3, and 4.
Each level is indicated by graphic bars, displaying each level of increment.
1. Press the ‘Menu’ and sound and Vol Control
1. Ringer: allows you to adjust the ringer volume for incoming calls, alerts, and alarm.
2. Speaker: allows you to adjust the volume for speaker
3. Earpiece: allows you to adjust the volume for handset
4. Key: allows you to adjust the volume of key tones.
4. Sound
3.DTMF Tone
This menu allows you to choose between a short and long DTMF tone. For example, a short DTMF tone will sound
and stop shortly, even if the key is pressed after the beep, whereas a long DTMF tone will continue to sound
1.
2.
3.
Press the ‘Menu’ and sound and DTMF tone
Select the option short or Long with your navigation Up/Down keys, and press…
Factory default is ‘Short’
4. Sound
4.SVC Alert
Your phone gives audible alerts (beeps) when the phone enters Service Network, from an area where there’s no
network service by your local Service Operator
1.
2.
3.
Press the ‘Menu’ and sound and SVC tone
Select the option On or Off with your navigation Up/Down keys, and press…
Factory default is ‘Off’
5. Stopwatch Menu
6. Stopwatch
Using this feature, you can use the phone as a stopwatch, The stopwatch provide the softkey of Start, Restart, and
Stop.
6. Alarm Menu
6. Alarm
1.Alarm Set
This menu allows you to set up to an alarm to ring at a specific time. To set an alarm
1.
2.
3.
4.
5.
6.
7.
Press the ‘Menu’ and Alarm and Alarm Set
Select the option On or Off with your navigation Up/Down keys, and press…
if it set the ‘On’, you can choose the alarm repeat type
Select the alarm repeat type ‘One tine’ or Always’ with your navigation Up/Down keys, and press..
Select the alarm duration 1~10 minute
Select the alarm time, ex) 12:23 (The time is 24 Hour type. )
If alarm setting option set to ‘Off’, the alarm feature disabled.
6. Alarm
The below list for available ring tone list.
1.
2.
2.Alarm Tone
Press the ‘Menu’ and Alarm and Alarm Tone
You choose using by the navigation up/down key..
Can Can,Willianmtel,Carnen
Trumpet,Turkey, Waltz of Sprin
Trout, Minuet, Heart of Woman,
Prelude, Waltz of Puppy, Mozart Minuet,
Elysee, Triump, Canon,
6. Alarm
3.Snooze Time
Happen to the alarm ring. To stop the alarm when it rings, press any key to stop the alarm. If you press speakerphone
key to stop the alarm.
CDMA FWP SXP-2080
13
Technical & User Manual
AKey Input Menu
A Key
“À75259#147À359#”
- Press the ‘À75259#147À359#” key
- You can show to the message ( Press [Akey] to continue), and press the ‘Akey” softkey
- Entering the input mode to AKey.
- In the A Key menu, you can make sure that A key is valid.
- Input 26 digits of A key what you want to valid.
- When you finished input, press ‘Ok’.
- If the A key is valid, you can show to the success message
- If the Akey is invalied, you can retry input to the AKey.
Ex)
26 digits (20 digits + 6 digits checksum)
Service (NA Mode) Menu
NA Mode
“47À869#À75259#”
- Press the “47À869#À75259#” key
- User must input the security lock code for accessing the NA Menu (000000)
CATEGORY
ITEM
DESCRIPTION
01. ESN
(Electronic Serial Number)
02. CAI Ver
(Common Air Interface)
03.SO
(Service Option)
1. General
Read Only
Read Only
EVRC
(Enhanced Variable Rate Codec)
MSM6000 Chip just supported the
EVRC.
04. SCM
(Station Control Mark)
05. LOCK CODE
Read Only
06. SLOT MODE
07. SLOT CYCLE INDEX
08. RC (Radio Configuration)
For CDG2 Testing
09. SPC CHANG
10. SPC VALUE
01. Current NAM
02. Setup NAM
You can selection the NAM1 or NAM2
02. NAM 1
03. NAM 2
01. NAM 1
or
02. NAM 2
01. MCC
(Mobile Country Code)
* 3 digit
02. MNC
(Mobile Network Code)
* 2 digit
03.MIN
CDMA FWP SXP-2080
*10 digit
14
Technical & User Manual
04.PHONE NO#
(Directory Number) * 10 digit
05. ACCOLC
(ACCess OverLoad Class)
0~ 15
01. Primary CH System A
06.PRIMARY CH.
02. Primary CH System B
01. Secondary CH System A
07.SECOND CH.
02. Secondary CH System B
08. ACQ SID
09. LOCK SID
10.H-S/NID Ena
CDMA HOME SID Enable
Yes or No
Home SID1~20
11. HOME SID/NID
Home NID1~20
LOCK Home SID1~20
12.SID/NID LOCK
LOCK Home NID1~20
13. CDMAPREF SYSTEM
14. PRL ENABLE
15. PRL ID
16. OTAPA ENABLE
17. MOB_TERM_HOME
18. MOB_TERM_FOR_SID
19. MOB_TERM_FOR_NID
CDMA FWP SXP-2080
15
Technical & User Manual
WARNING!
Only Authorized Service Personnel should remove the cover of your SXP-2080. For further assistance, contact
your Authorized Sungil Representative. Please have your unit’s model and serial number ready. The duration
of your calls and operate your phone in the most power-efficient manner.
Temperature Environment
Operating Temperature: From -20°C to +60°C ; Up to 95% relative humidity (non-condensing).
Storage Temperature: From -25°C to +75°C; Up to 95% relative humidity (non-condensing).
Antenna Care and Replacement
Do not use the SXP-2080 with a damaged antenna. If a damaged antenna comes into contact with the skin, a
minor burn may result. Have your antenna replaced by a qualified technician immediately.
Use only a manufacturer-approved antenna. Unauthorized antennas, modifications, or attachments could
damage the SXP-2080 .
Driving
Check the laws and regulations on the use of cellular products in the areas where you drive. Some jurisdictions
prohibit your using a cellular device while driving a vehicle. Even if your jurisdiction does not have such a law,
we strongly suggest that, for safety reasons, the driver use extreme caution when operating the cellular device
while the vehicle is in motion. Always obey the law.
Exposure to electronic Devices
Most modern electronic equipment is shielded from RF energy. However, RF energy from cellular devices may
affect inadequately shielded electronic equipment.
RF energy may affect improperly installed or inadequately shielded electronic operating and entertainment
systems in motor vehicles. Check with the manufacturer or its representative to determine
if these systems are adequately shielded from external RF energy. You should also check with the
manufacturer of any equipment that has been added to your vehicle.
Consult the manufacturer of any personal medical devices (such as pacemakers, hearing aids, etc.) to
determine if they are adequately shielded from external RF energy.
Turn your SXP-2080 OFF in health care facilities when any regulations posted in the areas instruct you to do
so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Aircraft
Turn OFF your SXP-2080 before boarding any aircraft.
• Use it on the ground only with crew permission.
• Do not use it in the air.
To prevent possible interference with aircraft systems, U.S. Federal Aviation Administration (FAA) regulations
require you to have permission from a crew member to use your cellular phone (or any other cellular product)
while the plane is on the ground. To prevent interference with aircraft systems,
FCC regulations prohibit using your cellular device while the plane is in the air.
Children
Do not allow children to play with your SXP-2080 to prevent damage to the unit.
Blasting Areas
Construction crews often use remote control RF devices to activate off explosives. Therefore, to avoid
interfering with blasting operations, turn your SXP-2080 OFF when in a "blasting area" or in areas posted:
"Turn off two-way radio."
CDMA FWP SXP-2080
16
Technical & User Manual
RF EXPOSURE INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.S.Government. These
limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent scientific organizations through periodic and
thorough evaluate on of scientific studies. The standards include a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6 W/kg.*Tests for SAR are conducted with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed
to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are
to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement
for safe exposure.
The tests are performed in positions and locations as required by the FCC. The highest SAR value for this model phone is
1.17 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet
the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov / oet / fcc id after
searching on FCC ID : R2NSXP-2080.
Additional information on Specific Absorption Rates (SAR)can be found on the Cellular Telecommunications &Internet
Association (CTIA) web-site at http://phonefacts.net.*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6watts/kg (W/kg)averaged over one gram of tissue. The standard incorporates a substantial margin of
safety to give additional protection for the public and to account for any agitations in measurements.
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC
96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by
FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and
international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
Near-Body Operation
To maintain compliance with FCC RF exposure requirements, maintain a 2.5cm(0.98 inch), separation distance between the
user's body and the phone, including the antenna, whether extended or retracted.
WARNING! Read this information before use
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
CDMA FWP SXP-2080
17
Technical & User Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 17 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6dfba5e7-5ae9-47fe-b424-a823e910b9c3 Producer : Acrobat Distiller 6.0 (Windows) Modify Date : 2006:11:09 22:10:27+09:00 Create Date : 2006:11:09 22:10:27+09:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:d3b4dcd2-203b-4e5f-95c4-57ccea946a34 Format : application/pdf Title : Microsoft Word - User manual_R2NSXP-2080.doc Creator : Harveysung Author : HarveysungEXIF Metadata provided by EXIF.tools