Epson Epsonnet 802 11G Wireless External Print Server User Setup Information C12C824221 (EpsonNet 802.11g Server)

80211b c82422q1

2015-03-28

: Epson Epson-Epsonnet-802-11G-Wireless-External-Print-Server-User-Setup-Information-665709 epson-epsonnet-802-11g-wireless-external-print-server-user-setup-information-665709 epson pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadEpson Epson-Epsonnet-802-11G-Wireless-External-Print-Server-User-Setup-Information- C12C824221 (EpsonNet 802.11g Wireless External Print Server) - User Setup Information Epson-epsonnet-802-11g-wireless-external-print-server-user-setup-information
Open PDF In BrowserView PDF
R4CB860
Setup

Proof Sign-off:
KOW N.Mizuno H.Tomizawa
T.Takahashi
NOC Lee

EpsonNet 802.11g Wireless Ext. Print Server

Setup

Rev. E

SETUP.FM
10/15/04

A3 size

English
4052667-00
xxx

Notes
Notes contain important information and
useful tips on the operation of your product.

Package Contents
Your network interface package includes the following items:
❏
❏
❏
❏

Wireless network interface
AC adapter (A261H) and power cord
USB cable
Software CD-ROM

You need to prepare the following items:
❏

Epson device (such as printer or all-in-one) with USB port. (See the
Reference Guide for information on the supported devices.)
Access point (required for Infrastructure mode only)
Computer with USB port

❏
❏
Note:
❏ To get to the access point via a wireless network, you need to install an 802.11b/g WLAN compliant network interface card on your
computer.
❏ The term “network interface” refers to the EpsonNet 802.11g Wireless Ext. Print Server in this guide.
❏ The network interface supports the following operating systems: Windows XP/Me/98 SE/2003/2000 and Mac OS X 10.2 or later/9.1 or later.
❏ See the manual shipped with your printer or all-in-one for the supported operating system of your printer or all-in-one.

For Windows

For Macintosh

If you are going to use the network interface with all-in-one, see
the back side of this sheet.
Otherwise, follow the steps below to install the Reference Guide
on your computer to see the setup instructions.
1. Insert the Software CD-ROM in the CD-ROM drive.

Follow the steps below to install the Reference Guide on your
computer to see the setup instructions.
1. Insert the Software CD-ROM in the CD-ROM drive.

2. Double-click the EPSON CD-ROM icon.
3. Double-click the appropriate OS icon in the EPSON folder.
2. From the Welcome screen, click Next.

4. From the Welcome screen, click Next.
3. Read the license agreement, and then click Agree.

5. Read the license agreement, and then click Agree.
4. Select Install Network Utility.

6. Select Install Network Utility.
5. Click the Install button located next to Reference Guide.

7. Click the Install button located next to Reference Guide.
6. To view the Reference Guide, double-click the
EpsonNet
Reference Guide icon on the desktop. See “How To” in the
Reference Guide for detailed information.
You can also access the Reference Guide via the Start
menu. To do so, click Start, point to All Programs (Windows
XP/Server 2003) or Programs (Windows Me/98/2000), and
then select EPSON. Click EpsonNet Reference Guide.

8. To view the Reference Guide, double-click the EpsonNet
Reference Guide icon on the desktop.
See “How To” in the Reference Guide for detailed
information.

Continue to the next page...

4052667
1-F

Rev.0
BK

Proof Sign-off:
KOW N.Mizuno H.Tomizawa
T.Takahashi
NOC Lee

R4CB860
Setup
SETUP.FM
10/15/04

Rev. E
A3 size

For EPSON STYLUS PHOTO RX500/600 and EPSON STYLUS CX4600/
6400/6600 Users (Windows Users Only)
Follow the steps below to set up the all-in-one for use on a
wireless network.
Make sure the all-in-one is set up and the software for the all-inone is installed on your computer before taking the steps below.
See the manual shipped with the all-in-one for detailed
instructions.

8. The “Found New Hardware Wizard” appears to prompt you
to install the USB driver. Select the Install from a list or specific
location radio button and then click Next.
Note for Windows XP Service Pack 2 Users:
If the following screen appears, select the No, not this time radio
button, and then click Next.

Note:
❏ If EpsonNet WinAssist is installed on your computer, uninstall it
before following the steps below.
❏ It is a good idea to write down the SSID and WEP Key or WPA
Personal password before taking the steps below.
❏ Windows Server 2003 is not supported.

1. Insert the Software CD-ROM in the CD-ROM drive.
2. From the Welcome screen, click Next.
3. Read the license agreement, and then click Agree.
4. Select Connect the Wireless Print Server.

5. Connect the network interface and the all-in-one with a USB
cable. Finally, turn on the all-in-one.

Select the Search for the best driver in these locations radio button
and then select the Search removable media check box. Finally,
click Next.
When the operation is completed, click Finish.
Note:
These screens may be different depending on the operating
system.

9. Click Next.

Note:
Be sure to use the USB cable that comes with the network
interface. If the all-in-one has a built-in USB cable, use it to connect
to the network interface.

10. Select the model of the all-in-one.

6. Connect the square connector on the USB cable to the USB
upstream connector on the network interface, and then
connect the other end to the USB port on the computer.

11. Click Install. Follow the on-screen instructions to make the
wireless settings and TCP/IP settings and install the drivers.
Note for Windows XP Service Pack 2 users:
If the following screens appear, click the Unblock button.

12. Pull out the USB cable from your computer and the network
interface.
7. Connect the power cord to the AC adapter, and then plug
the AC adapter into the network interface's DC-IN
connector. Finally, plug the power cord into a properly
grounded wall outlet.

13. Now you can use the all-in-one on the wireless network.

Copyright© 2004 by Seiko Epson Corporation, Nagano, Japan.
Printed in XXXXXX XX.XX-XX

4052667
1-B

Rev.0
BK
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:10:15 01:16:12Z
Title                           : C12C824221 (EpsonNet 802.11g Wireless External Print Server) - User Setup Information
Subject                         : This document contains information regarding the initial setup and installation for this product.
Modify Date                     : 2007:02:26 07:32:51-08:00
Page Count                      : 2
Page Mode                       : UseOutlines
Page Layout                     : SinglePage
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:ff26721d-6cf9-4c3d-b467-6161a48a420c
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2005:02:01 08:36:35-08:00
Document ID                     : uuid:7ffd1245-3e76-4a09-9701-4c9a09e9d3b8
Format                          : application/pdf
EXIF Metadata provided by EXIF.tools

Navigation menu