Ericsson LG LSP710 CDMA Fixed Wireless Terminal User Manual LSP 710 EN 090416

Download:
Mirror Download [FCC.gov]
Document ID	1107388
Application ID	4HwM3CgfK9ndVdcWuwmB5A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.73kB (1046682 bits)
Date Submitted	2009-05-07 00:00:00
Date Available	2009-06-21 00:00:00
Creation Date	2009-04-16 14:04:27
Producing Software	Acrobat Distiller 5.0.5 for Macintosh
Document Lastmod	2009-04-27 18:01:13
Document Title	LSP-710 EN_090416
Document Creator	QuarkXPress3.3k: AdobePS 8.7.3 (301)
Document Author:	hs

LSP-710 EN_090416 2009.4.16 2:3 PM 페이지1
LSP-710
USER GUIDE
Please read this manual carefully before operating your set.
Retain it for future reference.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지2
Highlights
Highlights
Congratulations on your subscription to the LSP-710
Fixed Wireless phone. This phone has been designed
to operate on the IS-2000 Air Protocol over the
800MHz band. And the phone has the advanced user
interface similar to mobile phone. It has greatly
enhanced voice clarity and provides various advanced
features.
Key phone features:
ᶀ
Wide view, Graphic, Backlit Display
ᶀ
Polyphonic Ring tones: A choice of 15 melodies
and 5 bell sounds available
ᶀ
Large Phonebook with 500 entries
ᶀ
Speed Dialling for upto 99 numbers
ᶀ
3 Way call conferencing
ᶀ
Enhanced SMS features - Group SMS.
ᶀ
Hands free Speaker Phone
ᶀ
Receiver Off-Hook tone
ᶀ
Adjustable Ringer Volume, Earpiece Volume, Key
Volume, Speaker Volume
ᶀ
A Menu driven interface with prompts for easy
operations
ᶀ
Serial port for Diagnostic.
ᶀ
Organiser: Scheduler, Alarm, Memo, Calculator,
World Clock with DST, Stopwatch
ᶀ
Fast charging battery
ᶀ
Voice Service
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지3
CONTENTS
4. Menu Tree
19
1.1
1.2
1.3
1.4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
23
25
30
32
35
36
42
Safety Instruction
Optimal Phone Performance
Care and Service
Safety Information
2. Introduction
2.1
2.2
2.3
2.4
Front View of the Phone
LCD Display
Installation
Installation Steps
10
11
14
3. Basic Operations
15
3.1
3.2
3.3
3.4
3.5
3.6
3.7
15
15
15
16
16
16
17
Making a Call
Redialing Last Number
3 way call conferencing
Volume Control
Receiving a Call
Lock Mode
Entering and Editing Information
Names
Messages
Call History
Sound
Display
Settings
Organiser
5. Speaker Phone
6. Troubleshooting
7. General Information
45
46
47
7.1 Main Unit
7.2 AC/DC Adapter
7.3 Battery
47
47
48
CONTENTS
1. Important Information
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지4
1. Important Information
quality and damage the phone.
Important Information
1.1 Safety Instruction
ᶀ
RF energy may affect improperly installed or
inadequately shielded personal medical devices
such as pace-makers or hospital monitors. Consult
the manufacturer of any personal medical devices
to determine whether they are adequately shielded
from external RF energy. Turn your phone OFF in
health care centers if any regulations posted in the
area instruct you to do so. Hospitals or health care
centers may be using equipment that may be
sensitive to external RF energy.
ᶀ
If this phone causes harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
WARNING / CAUTION
To reduce the risk of fire or electric shock, do not
expose this phone to rain or moisture. Do not use this
phone in swimming pools or other water bodies.
1.2 Optimal Phone Performance
ᶀ
ᶀ
ᶀ
Do not hold the antenna when operating the
phone, or operate the phone when someone is
within four inches (ten centimeters) of the antenna.
Both cases affect the call quality and may cause the
phone to operate at a higher power level than
required.
For the best call quality, keep the antenna free from
obstructions and position the antenna upright.
Do not use the phone if the antenna is damaged.
Replace the damaged antenna immediately by a
qualified technician. Use only a manufacturerapproved antenna. Non-approved antennas,
modifications or attachments may impair call
- Reorient or relocate the receiving antenna
- Place the radio or television farther away from the
phone.
- Connect the equipment to an outlet on a circuit
different from that to which the phone is
presently connected.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지5
1. Important Information
1.3 Care and Service
ᶀ
Use battery, antenna and AC/DC power adapter
provided by LG-Nortel . Using parts made by any
other manufacturer may invalidate the warranty.
Before cleaning, always unplug the phone from the
wall outlet and remove the antenna (or disconnect the
antenna cable). Do not use liquid or aerosol cleaners;
use a damp cloth for cleaning.
ᶀ
Only authorized personnel should service the
phone and its accessories. Faulty installation or
service can be dangerous and may invalidate the
warranty.
If the phone doesn’t work, do not attempt to
disassemble it; contact the phone service agent for
assistance.
ᶀ
Do not use the phone in any designated “cellular
phone use” area.
If any of the following conditions exist, unplug the
phone from the wall plug, remove the battery and call
the qualified engineer.
ᶀ
Avoid using the phone in high temperature or
humidity.
ᶀ
Avoid spilling any liquid on the phone. If the phone
gets wet, turn the power off immediately. If the
phone doesn’t work, please contact the service
provider immediately.
ᶀ
Avoid shock or impact.
ᶀ
We recommend you to charge the backup battery
before initial use. The backup battery may be
discharged during delivery.
Important Information
- Consult the Authorized LG-Nortel Dealer for
assistance of an experienced radio/TV technician.
- The power supply cord is damaged or frayed.
- Liquid has spilled into the phone.
- The phone has been exposed to rain or water.
- The phone has been dropped or damaged.
- The phone does not function normally even after
following the operating instructions.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지6
1. Important Information
Important Information
CAUTION
1.4 Safety Information
ᶀ
WARNING
ᶀ
For safety, use only an adapter
approved by LG-Nortel .
ᶀ
LG-Nortel does not bear
responsibility for any faults that
may arise due to non-conformation
to this guide. Example: LSP-710
Do not use the phone with a car
battery. It may cause electric
shock, fire, breakdown or
transformation.
Avoid using the phone in high
temperature or humidity. Avoid
spilling any liquid on this phone.
If the phone gets wet, Switch off
phone and turn off AC power
supply.
Keep the phone dry.
Submersion, humidity, and
liquids contain minerals that
may corrode internal electronic
circuits.
(LG-Nortel Power Adapter
Source: DC 5V / 1A)
ᶀ
ᶀ
Do not, in any way, cause a
short-circuit. It may start a fire
or the phone may explode
causing injury.
ᶀ
ᶀ
Do not create a sudden impact
on the battery by throwing it. Do
not dispose off batteries by
putting them in a fire. They may
explode or catch fire due to the
electrolyte within.
Do not store or use the phone
in dusty or dirty areas as this
can damage the moving parts.
ᶀ
Do not store the phone in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and
warp or melt certain plastics.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지7
1. Important Information
ᶀ
Do not attempt to open it. Nonexpert handling of the device
could damage it. It may cause
fire, electric shock and
breakdown. Consult your
authorized LG-Nortel dealer for
assistance.
ᶀ
Do not drop, knock or shake the
phone. Rough handling may
break the internal circuit boards.
ᶀ
Do not use harsh chemicals,
cleaning solvents or strong
detergents to clean the phone.
Wipe it with a soft cloth that has
been slightly dampened in a mild
soap and water solution.
ᶀ
Do not paint the phone. Paint
can clog the device’s moving
parts and prevent proper
functioning.
ᶀ
During lightning, do not touch
the power plug or the phone
line. It may result in an electric
shock or death.
ᶀ
Do not install the phone under
direct sunlight or on an uneven
surface.
ᶀ
Before using the plug, check the
available power voltage.
Inaccurate power voltage may
cause fire and damage.
Important Information
ᶀ
Do not store the phone in cold
areas. When the phone warms
upto its normal operating
temperature, moisture can form
inside the phone, which can
damage the internal electronic
circuit boards.
Example: LSP-710 Input
Voltage: 100 ~ 240V.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지8
1. Important Information
Important Information
ᶀ
Do not plug many power cords
into one outlet.
It may cause fire or electric
shock.
ᶀ
Do not remodel the power cord
or disassemble it.
If the power cord or plug is
impaired, do not use it.
It may cause fire or electric shock
ᶀ
Do not install the phone in an illventilated place.
It may cause fire or a breakdown.
ᶀ
Do not touch the plug with wet
hands. When disconnecting the
power cord of any accessory,
grasp and pull out the plug itself
and not the cord. It may cause
fire or electric shock.
ᶀ
Do not put heavy objects on the
power cord. Do not bend the
power cord too much. It may
cause fire or electric shock.
ᶀ
Use only an LG-Nortel approved
battery and adapter. If not, it
may cause an explosion or result
in a short-circuit. LG-Nortel
does not bear any responsibility
for the damage.
ᶀ
When you disconnect the power
cord of any accessory, grasp and
pull the plug itself and not the
cord. It may cause the adapter to
breakdown.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지9
2. Introduction
ῡ Soft key 1 : Activates Menu state
‫ڹ‬
② Dial/Flash : Activates Dial or Flash state, make it possible to
redial from call history
‫ڻ ں‬
‫ۃ‬
Introduction
2.1 Front View of the Phone
③ Soft key 2 : Searches phone number list
④(
▲) : Moves to SMS Menu, Moves up in the Menu
⑤(
▼) : Selects Melody/Bell setting Menu, Moves down
in the Menu
‫ھ‬
‫ڼ‬
‫ڽ‬
‫ڿ‬
⑥ END : Deactivates a state - End or Power ON/OFF
⑦ Clear : Deletes the last digit, Moves previous Menu, My Menu
⑧(
) : Activates hands free speaker phone function
⑨ ‘*’ : Input dial ‘*’, Makes a phone switch between the ‘Light
mode’ & the ‘Previous set mode’ after long-press
⑩ ‘#’ : Input dial ‘#’, Makes a phone lock after long-press
⑪ MIC
⑫ Attached Antenna
‫ہ‬
‫ۂ‬
‫ۀ‬
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지10
2. Introduction
Introduction
2.2 LCD Display
The LCD shows icons on the top of the LCD screen.
Different indicators appear based on the phone's operating mode.
Icon
Operating Condition
RSSI indicator: Indicates the signal strength in the service area.
No service: The phone is not receiving any system signal.
Roaming Service
Bell (Light :
).
In use: Displayed when a call is in progress or the phone is in off-hook state
Alarm: Displayed when alarm time is set
Text message: Displayed when a text message is received
Voice message: Displayed when voice message are received
Text and Voice message: Displayed when text and voice messages are received.
Lock mode
Battery charge level: Indicates charged battery level
Charge complete (Others :
10
, Only outlet (No battery) )
No AC power & Battery ON. But in low battery state
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지11
2. Introduction
2.3 Installation
CDMA Fixed Wireless Phone.
Main Phone
Dipole Antenna
AC/DC Power Adapter
User Guide
Introduction
You should follow each step carefully as shown below in order to guarantee the proper operation of
11
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지12
2. Introduction
STEP I. Check Components
Introduction
ᶀ
ᶀ
ᶀ
The following components are supplied for Fixed
Wireless Phone.
1. LSP-710 Main Phone with Handset
-1EA-
STEP III. Connect Components
(Please refer to “Installation Steps” in 2.4)
2. Dipole Antenna
-1EA-
ᶀ
3. AC/DC Power Adapter
-1EA-
4. User Guide
-1EA-
Connect the antenna to the TNC antenna
connector located at the top of the phone. If you
have placed the phone on a flat surface, position
the antenna upright.
ᶀ
Connect the curl cord of the handset to the RJ-11
port located on the bottom side of the phone.
ᶀ
Connect the AC/DC Adapter cable to the DC input
port located at the top of the phone.
Please make sure that these components are
present before you begin to install the phone. If
any of the components are missing or damaged,
contact your service provider immediately.
STEP II. Place the Terminal
ᶀ
Place the phone on the stable flat surface area
(desk, table, etc.). Serious damage may result if the
phone is dropped. Do not place the phone within
1 meter of heaters or radiators.
This phone is designed for desktop usage. Avoid
the direct exposure to sunlight and dampness.
12
Read the Safety Information located in the first
part of this document before you place the phone.
- If it is correct, you will be saw “Under Charge” on
the LCD.
- If it is not correct(Booting fails or you don’t see
“Under Charge” on the LCD), you will have to
reconnect the adapter.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지13
2. Introduction
ᶀ
STEP IV. Check the LCD Display
ᶀ
After you follow the installation instruction step I
to step III, please check the LCD for normal
operation.
ᶀ
If you do not see the status of service, please
repeat the 4th instruction of step III.
1. Keep away from electrical appliances such as TV,
computer, radio etc.
2. Keep the phone in a high and central location
without any obstructions.
3. Raise the integral antenna of the phone to get
maximum strength as shown in the figure.
Introduction
Please observe the following to get better voice
quality.
Then confirm the status of phone to get the proper
signal strength from the service operator system.
13
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지14
2. Introduction
Introduction
2.4 Installation Steps
Please follow the procedure below to install the phone properly.
Connect basehandset to the
handset connector.
Connect the antenna to the
TNC connector (Turn right).
Connect the AC
power supply.
14
Press END button to
operate initially.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지15
3. Basic Operations
1. Pick up the handset or press
You can make a call as follows.
2. Listen for dial tone.
1. Pick up the handset or press
button.
2. Listen for dial tone.
3. Enter the phone number with area code if
needed.
4. Wait for the Auto Dial Time-out or Press
D i a l / F l a s h button.
5. The call is connected and you may start
conversation.
6. To disconnect the call, replace the handset or
press
button.
આ When the user presses the D i a l / F l a s h button
after dialing any desired number, the phone makes
a call immediately.
3.2 Redialing Last Number
You can make a redial to last number, shown in All
Calls.
button.
3. Press D i a l / F l a s h button.
4. The call is connected and you may start
conversation.
5. To disconnect the call, replace the handset or
press
button.
Basic Operations
3.1 Making a Call
આ You can also dial any of the last 60
(Dialled+Received+Missed+In Call Memo) numbers
stored in All Calls.
3.3 3 way call conferencing
You can start tripartite conversation.
1. Enter the phone number of the 2nd party phone
while you are in telephonic conversation with 1st
party.
2. Press D i a l / F l a s h button.
This service should be provided by your service
provider.
15
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지16
3. Basic Operations
Basic Operations
3.4 Volume Control
1. Press U p / D o w n button of navigation while in
a call, to adjust Earpiece volume.
* Also, you can lock your phone manually and change
your default password as explained [4.6.4 page
no.39]
Under Lock Mode
3.5 Receiving a Call
When the bell rings or backlight blinks in Light mode,
you can receive a call as follows
1. Pick up the handset or press the
you need to modify the lock code, you may modify it
using the new lock code within the security set Menu.
button.
2. Start a conversation.
3. To disconnect the call, replace the handset or
press the
button.
1. Press ‘#’ button for some time.
The phone is now locked.
2. To unlock, press Unlock button(Soft Key 2).
●●●●●●
Dial/Flash
Soft Key 1
●●●●●●
Soft Key 2
3. Enter unlock code. (Default “0000”)
3.6 Lock Mode
Protects your phone from unauthorized use. Once the
phone is locked, it is in restricted mode, until the lock
code is entered. This will allow you to receive phone
calls and still make only emergency calls. The lock
code/password on your phone is “0000” by default. If
16
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지17
3. Basic Operations
You can edit the phonebook, Short Messages,
Scheduler and Banner using various text input mode.
Key Functions
Soft key 2 : Press to scroll and select a mode through
menus.
- You can scroll through the modes using Soft key 2 in
the following
Shift key : Used to change the letter case. In
Abc Mode, it switches 3-types of letter case such as
Abc, ABC, abc.
. key : In Abc mode, press to insert sentence
mark ( . , - ? ! ‘ @ : 1 )
SPACE key : Press to complete a word or insert
a space.
- Clear key : Press to delete a single space or
character. Press and hold to delete entire words.
Input Mode
Text Input provides six modes for entering text,
numbers, special characters, and punctuation.
- A b c M o d e : Use Abc mode to input text in English.
If you want an instant input of numbers in Abc mode
without converting to 123 mode, press the button
until number is displayed In Abc mode.
- 1 2 3 M o d e : Type numbers using one keystroke
per number. To change to 123 mode in a text entry
field, press Soft key 2 until 123 mode is displayed.
Basic Operations
3.7 Entering and Editing
Information
- S y m b o l s M o d e : Insert special characters,
punctuation. You may use any of the special
characters. When the special characters are
displayed, you can select the number corresponding
to the character that you want to input. To search
more symbols, press Soft key 1 N e x t or
U p / D o w n key button.
- S m i l e y s M o d e : Insert smileys in your text. When
the smileys are displayed, you can select the number
corresponding to the smileys that you want to
input. To search more smileys, press Soft key
1 N e x t or U p / D o w n key button.
- T e m p l a t e s : You can use predefined message in
the phone memory immediately. This mode is very
useful for save your time.
17
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지18
3. Basic Operations
Initial Cap(Abc)
Basic Operations
Only the first letter is capitalized.
Caps Lock(ABC)
All subsequent letters are capitalized.
Lowercase(abc)
All subsequent letters are lowercase.
Examples Using ABC Text input
Typing In ABC(Multi-tap) Mode
For example, to type “MANUAL”, follow these steps:
1. Press: Soft key 2 to change letter case Abc
mode.
2. Press: Shift key to change to ABC Caps Lock
mode.
3. Press:
4. Display: MANUAL
18
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지19
4. Menu Tree
Main Menu
Sub-Menu
2. Add
1. Names
2. Messages
Setting Value
Name Search / Number Search
Name / Mobile / Home / Office / General /
E-mail / Memo / Ring
3. Speed Dial
Options / Erase
4. Erase All Names
Yes / No
1. Write
Fra / Abc / 123 / Symbols / Smileys / Templates
2. Inbox
View / Erase
3. Outbox
View / Erase
4. Voice Mail
Erase
5. Broadcast box
View / Erase
6. Archive
View / Erase
7. Drafts
View / Erase
8. Templates
View / Add
9. SMS Groups
View / Options
Menu Tree
1. Find
19
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지20
4. Menu Tree
Main Menu
Sub-Menu
Menu Tree
0. Erase Message
*. Message Settings
3. Call History
4. Sound
20
Setting Value
Erase Inbox / Erase Outbox / Erase Broadcast box / Erase Archive /
Erase Drafts / Erase All Messages
Priority / Delivery Ack / Deferred Delivery / Validity Period /
Save Sent Message / Auto Delete Inbox
1. Missed
View / Erase
2. Received
View / Erase
3. Dialled
View / Erase
4. In Call Memo
View / Erase
5. Call Duration
Last Dialled Calls / All Dialled Calls / All Calls / Reset Call Duration
6. Erase History
Erase Missed / Erase Received / Erase Dialled
1. Ring Type
Ring / One-Beep / Light
2. Ring Tone
Bell / Melody
3. Ringer Volume
Option setting (Bar 0 ~ Bar 5)
4. Earpiece Volume
Option setting (Bar 1 ~ Bar 5)
5. Key Volume
Option setting (Bar 0 ~ Bar 5)
6. Speaker Volume
Option setting (Bar 1 ~ Bar 5)
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지21
4. Menu Tree
Main Menu
Sub-Menu
5. Display
Setting Value
Alert Type / Alert Tone / Message Reminder
1. Language
English/Français
2. Wallpaper
Idle Screen / Banner
3. Menu Style
List / Icon
4. Backlight
Off / 10 Secs / 30 Secs / Night Only / Always On
5. Contrast
Option setting (Bar 0 ~ Bar 8)
1. Add to My Menu
Names / Messages / Call History / Sound / Display/
Menu Tree
7. Message Alert
Settings / Organiser
6. Settings
2. Call
Call Forward / VMS Forward / Voice Mail Access Number / Call Timer /
Call Connect Alert / Silent Scratch Pad
3. Phone
Auto Dial Time Out / Phone Info
4. Security
Restrict Call / HotLine / Set NAM / Clear Memory & Reset /
Lock Mode / Emergency Numbers / Change Lock Code /
Reset Phone
21
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지22
4. Menu Tree
Main Menu
Menu Tree
7. Organiser
22
Sub-Menu
Setting Value
1. Scheduler
OK / Add
2. Alarm
Options / View
3. Memo
View/ Add
4. Calculator
OK / Back
5. World Clock
DST / Back
6. Stopwatch
Start
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지23
4. Menu Tree
- Memo:
You may select from four Sub-Menus (Find, Add,
Speed Dial, Erase All Names) for this item. If you press
Soft Key1, Menu is activated.
- Ring:
●●●●●●
Dial/Flash
Soft Key 1
●●●●●●
Soft Key 2
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D
button and to return to the previous screen, press
C l e a r button.
* In this menu, All sorts of the icon have the meaning
as follows:
- Name of person :
4.1.1 Find
To find phone numbers you have stored in the Phone
Book.
1. Press Soft key 1 M e n u + 1 ( N a m e s ) +
1 ( F i n d ) in on-hook state.
2. Select a desired search Menu. N a m e S e a r c h ,
N u m b e r S e a r c h : Enter full or starting of
name (Number), select O K .
3. Select desired item.
- Mobile phone number :
4. To make a call, pick up the handset or press
button.
- Home phone number :
5. To view, press Soft Key 1.
- Office phone number :
O p t i o n s : You can E d i t or E r a s e.
- General phone number :
You can send a message also while number is
highlighted.
- E-mail address :
Menu Tree
4.1 Names
23
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지24
4. Menu Tree
4.1.2 Add
Menu Tree
You can save upto 500 entries in your LSP-710
phonebook.
You can store multiple contact details under a Name:
Mobile Number, Home Number, Office Number,
General Number, E-mail address of the contact.
You can also add any additional details about the
contact like the Person’s birthday , favorite things etc
in Memo.
Lastly, there is an option to assign a Ring tone to a
Name.
1. Press Soft key 1 M e n u + 1 ( N a m e s )
2 ( A d d ) in on-hook state.
2. Enter the information to select a desired item.
1. Press Soft key 1 M e n u + 1 ( N a m e s ) +
3 ( S p e e d D i a l ) + O p t i o n s +1
1( A d d )
in on-hook state.
2. Find your desired phone number.
3. Select O K .
* You can R e p l a c e o r E r a s e a stored item.
4.1.4 Erase All Names
You can delete all Entries in your LSP-710 phone
book.
1. Press Soft key 1 M e n u + 1 ( N a m e s ) +
4 ( E r a s e A l l N a m e s ) in on-hook state.
2. Enter Lock Code. ( Default 0000)
4.1.3 Speed Dial
Speed Dial allows you to make a call faster by just
pressing a corresponding number.
You can save upto 99 entries.
24
3. Press “Yes” or “No”.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지25
4. Menu Tree
Text messaging, page and voice mailbox become
available as soon as the power is on. You may access
the above type of messages using the Messages
) key.
The phone can store upto 50 messages in each Inbox
and Outbox. And the phone can also store upto 50
messages in Archive, 30 messages in Drafts, 30
messages in Templates, 5 SMS Groups with 10
Entries per Group.
- Unread :
- Unread Urgent :
- Read :
- Read Urgent :
- Sent :
- Sent Urgent :
- Unsent :
- Unsent Urgent :
Menu Tree
* In the list of Inbox or Outbox , all sorts of the icon
have the meaning as follows:
4.2 Messages
If you press Soft Key1, Menu is activated.
●●●●●●
Soft Key 1
Dial/Flash
●●●●●●
Soft Key 2
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D
button and to return to the previous screen, press
C l e a r button.
To access messages, Press Soft key 1 M e n u +
2 ( M e s s a g e s ) in on-hook state.
4.2.1 Write
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
1 ( W r i t e ) in on-hook state.
2. Write message.
Refer to the 3.7 (page 16) Entering and Editing
Information about text input.
3. Select O K .
25
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지26
4. Menu Tree
4. Enter phone number or press O p t i o n s .
Menu Tree
O p t i o n s : can select F i n d , S M S G r o u p s .
5. Select options as following.
Priority: Allows you to give priority to Message as
N o r m a l or U r g e n t .
Delivery Ack: This function allows you to know
whether the Messages have been successfully
transmitted to the recipient. If you want to
activatethis function, set to O n or O f f .
Deferred Delivery : This function allows you to
reserve when the message is sent.
You may select from seven options( I m m e d i a t e /
After 30 Minutes / After 1 Hour /
After 2 Hours / After 12 Hours /
After 1 Day / After 2 Days )
Validity Period : This function allows you to define
the period of the valid message until the message
sending is completed.
You may select from seven options( D e f a u l t /
26
30 Minutes / 1 Hour / 2 Hours /
12 Hours / 1 Day / 2 Days )
Save Sent Message: This function allows you to
choose whether the sent message shall be saved or
not. You may select O n or O f f
6. Select S e n d .
4.2.2 Inbox
Received messages are stored here.
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
2 ( I n b o x ) in on-hook state.
2. To erase message, select E r a s e .
3. To view desired message, select V i e w .
4. You may select from five options (1. E r a s e
2. R e p l y 3. Forward 4. Move To Archive
5. Save Number ).
* For example, the meaning of (2/3) in Inbox is that 2
out of 3 messages are unread.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지27
4. Menu Tree
4.2.3 Outbox
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
Menu Tree
All your successfully sent messages are saved here.
2. Pick up the handset or press
button to
make a call back your voice mailbox if the number
of the voice mailbox is provided by the telecom
service company’s system.
3 ( O u t b o x ) in on-hook state.
2. To erase message, select E r a s e .
4.2.5 Broadcast box
3. To view desired message, select V i e w .
Message box for advertisement
4. You may select from four options (1. E r a s e
2. Resend 3. Forward 4. Move To Archive ).
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
5 ( B r o a d c a s t b o x ) in on-hook state.
2. To erase all messages, Select E r a s e .
4.2.4 Voice Mail
3. To view desired message, Select V i e w .
Voice mail notifications indicate the number of new
voice mail messages in your mailbox.
4. You may select option.
Only the most recent voice mail notification will be
stored in your phone;
4.2.6 Archive
previous message will be overwritten.
Archive allows you to store your messages in a
different folder.
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
4 ( V o i c e M a i l ) in on-hook state.
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
6 ( A r c h i v e ) in on-hook state.
27
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지28
4. Menu Tree
2. To erase message, select E r a s e .
Menu Tree
3. To view desired message, select V i e w .
4. You may select options
(II n b o x : 1. E r a s e 2. R e p l y 3. Forward
4. S a v e N u m b e r O u t b o x : 1. E r a s e 2.
R e s e n d 3. F o r w a r d )
4.2.7 Drafts
A Draft is a function enabling you to store messages
to be sent in Future. A total of upto 30 messages may
be saved in Draft. These include failed messages,
incomplete/unsent messages saved by the user and
also messages which automatically get saved when a
user is interrupted by a call while composing a
message.
The most recent data is saved at the top of list.
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
7 ( D r a f t s ) in on-hook state.
2. To erase message, select E r a s e .
28
3. To view desired message, select V i e w .
4. You may select from two options (1. E r a s e
2. S e n d ).
4.2.8 Templates
There are 10 predefined phrases included in the
Templates.
You may add up 20 templates more. A total of 30
templates may be saved.
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
8 ( T e m p l a t e s ) in on-hook state.
2. If you select the message, View/Add appears on
the screen.
View: There are two options: Erase and Edit.
Add : You may add new template Messages to
the Templates list.
4.2.9 SMS Groups
Five SMS Groups are available in your phone. You can
add upto ten members in each group. You can also
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지29
4. Menu Tree
rename the group name.
9 ( S M S G r o u p s ) in on-hook state.
2. Select desired group
View : There are five options (1. Send 2. Send to
all 3. Replace 4. Erase Member 5. Erase Group)
or add new member.
Options : There are four options (1. Send
2. Rename 3. Erase Group 4. Erase All).
4.2.11 Message Settings
Priority
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
Menu Tree
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
*( M e s s a g e S e t t i n g s ) + 1 ( P r i o r i t y ) in
on-hook state.
2. You may select from two options (1. N o r m a l
2. U r g e n t ).
Delivery Ack
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
4.2.10 Erase Message
*( M e s s a g e S e t t i n g s ) + 2 ( D e l i v e r y A c k )
You may erase message with various options from
Inbox, Outbox, Broadcast box, Archive, or Drafts. You
may Erase All Messages by selecting single option All
Messages.
in on- hook state.
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
0 ( E r a s e M e s s a g e ) in on-hook state.
2. Select desired option to erase.
3. Press O K button.
2. Select O n or O f f .
Deferred Delivery
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
*( M e s s a g e S e t t i n g s ) +
3 ( D e f e r r e d D e l i v e r y ) in on-hook state.
2. Select one of the following.
29
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지30
4. Menu Tree
1. I m m e d i a t e 2. A f t e r 3 0 M i n u t e s
Menu Tree
3. A f t e r 1 H o u r 4. A f t e r 2 H o u r s
Auto Delete Inbox
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
5. A f t e r 1 2 H o u r s 6. A f t e r 1 D a y
*( M e s s a g e S e t t i n g s ) +
7. A f t e r 2 D a y s
6 ( A u t o D e l e t e I n b o x ) in on-hook state.
Validity Period
2. Select O n or O f f .
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
*( M e s s a g e S e t t i n g s ) +
4.3 Call History
4 ( V a l i d i t y P e r i o d ) in on-hook state.
If you press Soft Key1, Menu is activated.
2. Select desired time.
●●●●●●
Dial/Flash
●●●●●●
1. D e f a u l t 2. 3 0 M i n u t e s 3. 1 H o u r
4. 2 H o u r s 5. 1 2 H o u r s 6. 1 D a y
7. 2 D a y s
Save Sent Message
1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) +
*( M e s s a g e S e t t i n g s ) +
5 ( S a v e S e n t M e s s a g e ) in on-hook state.
2. Select O n or o f f .
30
Soft Key 1
Soft Key 2
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D
button and to return to the previous screen, press
C l e a r button.
The phone can store upto 60 Received Call, 60
Dialled Call, 60 Missed Call and 5 In Call Memo in Call
History.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지31
4. Menu Tree
4.3.2 Received
- Received :
1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) +
2 ( R e c e i v e d ) in on-hook state.
- Dialled :
2. To erase received calls, select E r a s e .
- Missed :
3. To view desired item, select V i e w .
- In Call Memo :
4. You may select from three options (1. E r a s e
2. S e n d M e s s a g e 3. S a v e N u m b e r ).
- 3 Way Call :
4.3.1 Missed
1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) +
1 ( M i s s e d ) in on-hook state.
Menu Tree
* In the list of All Calls, All sorts of the icon have the
meaning as follows:
4.3.3 Dialled
1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) +
3 ( D i a l l e d ) in on-hook state.
2. To erase missed call, select E r a s e .
2. To erase dialled numbers, select E r a s e .
3. To view desired item, select V i e w .
3. To view desired item, select V i e w .
4. You may select from three options (1. E r a s e
2. S e n d M e s s a g e 3. S a v e N u m b e r ).
4. You may select from three options (1. E r a s e
2. S e n d M e s s a g e 3. S a v e N u m b e r ).
31
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지32
4. Menu Tree
Menu Tree
4.3.4 In Call Memo
4.3.6 Erase History
“In Call Memo” allows you to make quick notes
(numbers only) while call is in progress. While in call,
press Soft key 1(Menu), and then select 2 to type in
‘In Call Memo’.
You may erase all history from three options (1.
Erase Missed 2. Erase Received 3. Erase Dialled )
To retrieve an In Call Memo :
1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) +
4 ( I n C a l l M e m o ) in on-hook state.
2. To erase in call memo, select E r a s e .
1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) +
6 ( E r a s e H i s t o r y ) in on-hook state.
2. To select history that you want to erase, press
OK .
When you press the D i a l / F l a s h button, All Calls
are displayed.
3. To view desired item, select V i e w .
4. You may select from three options (1. E r a s e
2. S e n d M e s s a g e 3. S a v e N u m b e r ).
4.3.5 Call Duration
1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) +
5 ( C a l l D u r a t i o n ) in on-hook state.
32
2. You may select from four options
(1. Last Dialled Calls 2. All Dialled Calls
3. All Calls 4. Reset Call Duration ).
4.4 Sound
Sound lets you choose your phone’s sound settings
to your environment.
Sound Menu contains settings for your phone’s Ring
Type, Ring Tone, Ringer Volume, Earpiece Volume,
Key Volume, Speaker Volume, and Message Alert.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지33
4. Menu Tree
2. There are two modes (1. Bell 2. Melody ).
Dial/Flash
You may select one ring sound among the 5 Bells
or 15 Melodies.
●●●●●●
Soft Key 1
●●●●●●
Soft Key 2
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D
button and to return to the previous screen, press
C l e a r button.
Menu Tree
If you press Soft Key1, Menu is activated.
4.4.3 Ringer Volume
You may select a volume level of ringer sound among
the 0 ~ 5 steps.
When you select 0 level, ringer sound become mute.
4.4.1 Ring Type
You may select the call alert option.
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
1 ( R i n g T y p e ) in on-hook state.
2. There are three modes (1. Ring 2. One-Beep
3. Light ).
4.4.2 Ring Tone
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
2 ( R i n g T o n e ) in on-hook state.
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
3 ( R i n g e r V o l u m e ) in on-hook state.
2. Select the desired volume level by using the
navigation key and press O K .
4.4.4 Earpiece Volume
You may select a volume level of handset earpiece
sound among the 1 ~ 5 steps.
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
4 ( E a r p i e c e V o l u m e ) in on-hook state.
33
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지34
4. Menu Tree
Menu Tree
2. Select the desired volume level by using the
navigation key and press O K .
4.4.5 Key Volume
You may select a volume level of key tone sound
among the 0 ~ 5 steps.
When you select 0 level, key tone sound become
mute.
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
5 ( K e y V o l u m e ) in on-hook state.
2. Select the desired volume level by using the
navigation key and press O K .
2. Select the desired volume level by using the
navigation key and press O K .
4.4.7 Message Alert
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
7 ( M e s s a g e A l e r t ) in on-hook state.
2. Select desired item (1. Alert Type 2. Alert Tone
3. Message Reminder )
Alert Type: 1. O f f 2. R i n g 3. O n e - B e e p
4. L i g h t
Alert Tone: 1. Effect 1 2. Effect 2 3. Effect 3
4. Effect 4 5. Effect 5
4.4.6 Speaker Volume
Message Reminder: 1. O f f 2. O n c e
You may select a volume level of speaker phone sound
among the 1 ~ 5 steps.
3. E v e r y 2 M i n u t e s 4. E v e r y 5 M i n u t e s
1. Press Soft key 1 M e n u + 4 ( S o u n d ) +
6 ( S p e a k e r V o l u m e ) in on-hook state.
34
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지35
4. Menu Tree
4.5.2 Wallpaper
You can personalize your phone’s display by selection
of various display settings like Language, Wallpaper,
Menu Style, Backlight and Contrast.
It allows you to customize the LCD screen display in
the standby mode / idle state.
If you press Soft Key1, Menu is activated
●●●●●●
Dial/Flash
Soft Key 1
●●●●●●
Soft Key 2
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D
button and to return to the previous screen, press
C l e a r button.
4.5.1 Language
1. Press Soft key 1 M e n u + 5 ( D i s p l a y ) +
1 ( L a n g u a g e ) in on-hook state.
2. Select between English or Francais and press.
1. Press Soft key 1 M e n u + 5 ( D i s p l a y ) +
Menu Tree
4.5 Display
2 ( W a l l p a p e r ) in on-hook state
2. Select 1 ( I d l e S c r e e n ) or 2 ( B a n n e r ).
Idle Screen
Allows you to choose among given LCD screen
display option during idle state.
The Idle Screen has 6 options( Clock1 , Clock2 ,
Mushroom , Castle , Beach , Sea ), So you
may choose the one of those screens.
Banner
Enter the string of characters you want to be
displayed.
Banner is presented during idle mode along with
selected wallpaper.
35
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지36
4. Menu Tree
Menu Tree
In the “clock 2” idle screen option, banner will not
displayed.
4.5.3 Menu Style
Allows you to select the Menu style.
1. Press Soft key 1 M e n u + 5 ( D i s p l a y )
3 ( M e n u S t y l e ) in on-hook state
+3
2. Select 1 ( L i s t ) or 2 ( I c o n ) and press O K .
4.5.4 Backlight
Allows you to choose the settings of the LCD and
keypad backlight.
1. Press Soft key 1 M e n u + 5 ( D i s p l a y )
4 ( B a c k l i g h t ) in on-hook state.
+4
2. Select among O f f / 1 0 S e c s / 3 0 S e c s /
Night Only / Always On
* If you want to turn on the backlights from 6 PM to 6
AM, select Night Only.
36
4.5.5 Contrast
Allows you to select the contrast setting using the
scale of brightest to darkest.
You may select a contrast level of LCD among the
0 ~ 8 steps.
1. Press Soft key 1 M e n u + 5 ( D i s p l a y ) +
5 ( C o n t r a s t ) in on-hook state.
2. Select the desired contrast level by using the
navigation keys and press O K .
4.6 Settings
If you press Soft Key1, Menu is activated.
●●●●●●
Dial/Flash
Soft Key 1
●●●●●●
Soft Key 2
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D
button and to return to the previous screen, press
C l e a r button.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지37
4. Menu Tree
4.6.1 Add to My Menu
To add to My Menu
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
1 ( A d d t o M y M e n u ) in on-hook state.
2 ( C a l l ) + 1 ( C a l l F o r w a r d ) in on-hook
state.
2. Select from Immediate / When Busy /
N o R e p l y / Not Reachable / D i sabl e A l l .
“Disable All” deactivates all the activated call
forwarding options.
3. Select E n a b l e or D i s a b l e and press O K .
1) Search desired item in Add to My Menu.
VMS Forwad
2) Select A d d .
“VMS Forward” lets you forward all your incoming
calls to Voice Mail connection.
2. To delete My Menu, press C l e a r button:
1) Search desired item in My Menu.
2) Select E r a s e using soft key 2.
Menu Tree
Allows you to: 1) Make you own menu. 2) Access
your favorite menu quickly by customizing My Menu.
By pressing the Clear button in idle condition, user
will go to ‘My Menu’ option and can access or erase.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
2 ( C a l l ) + 2 ( VMS Forward ) in on-hook
state.
4.6.2 Call
Call Forward
“Call Forward” lets you forward all your incoming calls
to another number.
2. Select from Immediate / When Busy /
N o R e p l y / Not Reachable .
3. Select E n a b l e or D i s a b l e and press O K .
37
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지38
4. Menu Tree
Menu Tree
* Contact your service provider for more information
on Call Forward and VMS Forward.
Voice Mail Access Number
When you want to access your Voice mail, you are
required dialing Voice Mail Access Number.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
2( C a l l ) + 3( Voice Mail Access Number )
in on-hook state.
Call Timer
While a call is in progress, you can see the elapsed
time of the active call if you set Call Timer to be
Enable.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
2 ( C a l l ) + 5 ( C a l l C o n n e c t A l e r t ) in
on-hook state.
2. Select O n or O f f and press O K .
Silent Scratch Pad
Silent Scratch Pad (if set on) may stop a receiver
from hearing DTMF key sound of taking notes while
talking over the phone.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
2 ( C a l l ) + 6 ( S i l e n t S c r a t c h P a d ) in
on-hook state.
2. Select O n or O f f and press O K .
2 ( C a l l ) + 4 ( C a l l T i m e r ) in on-hook
state.
2. Select E n a b l e or D i s a b l e and press O K .
Call Connect Alert
This function will alert you when the call connection
has been established.
38
4.6.3 Phone
Auto Dial Time Out
Allows you to place a call automatically after the last
digit of the phone number is dialled.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지39
4. Menu Tree
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
3 ( P h o n e ) + 1 ( A u t o D i a l T i m e O u t ) in
3( P h o n e ) + 2( P h o n e I n f o ) +
on-hook state.
2 ( V e r s i o n ) in on-hook state.
Menu Tree
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
2. Select desired time and press O K .
You may select one of the seven options ( Off /
2 Secs / 3 Secs / 4 Secs / 5 Secs / 7 Secs /
10 Secs )
Phone Info
Memory Usage
Displays the Phone’s Memory Usage (Names,
Messages, Scheduler, Memo)
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s )
4.6.4 Security
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
4 ( S e c u r i t y ) in on-hook state.
2. Enter Lock Code. (Default “0000”)
Lock Mode
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
4 ( S e c u r i t y ) + 1 ( L o c k M o d e ) in on-hook
state.
3 ( P h o n e )+2
2( Phone Info )
+3
2. Select desired options and press O K .
+ 1 ( M e m o r y U s a g e ) in on-hook state.
You may select one of lock mode options.( Off /
Power On / Lock Now )
Version
Displays the Phone Software version, PRL version,
Hardware version.
O f f : means that the phone is never locked (Lock
mode can be used).
When locked, you can receive incoming calls or
39
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지40
4. Menu Tree
make only emergency calls.
Menu Tree
P o w e r O n : means that the phone is always
locked whenever it is turned on although you have
unlocked before.
L o c k N o w : means that the phone is locked
immediately.
(In idle state press “Key #” for a long time, The
phone is locked immediatly.)
N o t e : To unlock the phone, press Unlock button
(soft key2)
Enter 4-digit lock code (Default “0000”)
Emergency Numbers
Emergency Number can store upto three Numbers.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
4( S e c u r i t y ) + 2( E m e r g e n c y N u m b e r s )
in on-hook state.
2. To edit a number, press E d i t .
Change Lock Code
Change Lock Code allows you to enter a new four-
40
digit lock code.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
4( S e c u r i t y ) + 3( C h a n g e L o c k C o d e )
in on-hook state.
2. Enter current lock code.
3. Enter new four-digit lock code.
4. For confirmation, it will ask you to enter the new
lock code again.
Restrict Call
You can restrict your outgoing calls including numbers
/ numbers beginning with specified digit in the
Restrict list.
For example: If ‘9’ is stored in the Restrict list, all
number beginning with ‘9’ cannot be called. However
if ‘92’ is stored in Permit List, you can call numbers
beginning with ‘92’ successfully.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
4 ( S e c u r i t y ) + 4 ( R e s t r i c t C a l l ) in
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지41
4. Menu Tree
on-hook state.
3. If O n is selected,
⍥ Enter the numbers / starting digit of specific
numbers to be restricted in the Restrict list.
⍥ Enter the number / starting digits of the
numbers to be allowed in the Permit list.
4. To add new list, press A d d .
5. To erase (or edit) the existing list, press V i e w
+ Options
If you have selected ‘Enable’ and enter the HotLine
Number and Time, HotLine functions as follows:
When you pick up the handset or press
button ,
the phone automatically dials the HotLine Number
that you have already saved if any number is not
dialed for duration specified in HotLine Time.
Set NAM
This option is presently not available. Please contact
your service provider for further information. Use
NAM 1 only.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
HotLine
4 ( S e c u r i t y ) + 6 ( S e t N A M ) in on-hook
HotLine automatically calls to registered number by
passing setup time in off-hook state.
state.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
4 ( S e c u r i t y ) + 5 ( H o t L i n e ) in on-hook
state.
2. Select E n a b l e or D i s a b l e and press O K .
3. Enable is selected, enter Number and Time.
Menu Tree
2. Select O n or O f f and press O K .
2. Select N A M 1 or N A M 2 and press O K .
Clear Memory & Reset
Erase all data and return to factory setting. Be
cautious since any erased information is not
recoverable.
1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) +
41
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지42
4. Menu Tree
4( S e c u r i t y ) + 7( C l e a r M e m o r y & R e s e t )
Menu Tree
in on-hook state.
To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
To return to the initial screen, press E N D button.
And to return to the previous screen, press C l e a r
button.
2. Enter lock code.
3. To Clear Memory and Erase all data, select
Yes .
Reset Phone
Return to factory setting. But User data is not erased.
1. Press Soft key 1 M e n u + 6( S e t t i n g s ) +
4( S e c u r i t y ) + 8 ( R e s e t P h o n e ) in
on-hook state.
4.7.1 Scheduler
Scheduler keep your agenda convenient and easy to
access. Simply store your appointment and your
phone would alert you with a reminder of your
appointment.
7 ( O r g a n i s er )
1. Press Soft key 1 M e n u +7
1 ( S c h e d u l e r ) in on-hook state.
+1
2. Enter lock code.
2. Move cursor to desired day
3. To Reset Phone, select Y e s .
3. Select A d d .
4.7 Organiser
If you press Soft Key1, Menu is activated.
●●●●●●
Dial/Flash
Soft Key 1
42
4. If A d d is selected, you can store new
schedules.
5. If O K is selected,
●●●●●●
Soft Key 2
1) In case of already stored schedule, you may see
stored schedules and select from Options.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지43
4. Menu Tree
2) In the absence of schedule, “There is no data”
message is displayed.
3) You can select option from Off / Daily
/ Once / M o n ~ F r i / M o n ~ S a t /
S a t ~ S u n / Select days
4) Select ring tone and press O K .
Menu Tree
( A d d / E d i t / E r a s e / R i n g / Erase Today
/ Erase Past Day )
Select from Options: Ring / Erase Past Day
4.7.3 Memo
4.7.2 Alarm
Allows user to set alarm time.
You can save 3 Alarms and set the alarm for a period
and specified time.
Memo function allows user to store upto 10 memos.
1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) +
3 ( M e m o ) in on-hook state to add, view or
edit memos.
1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r )
+ 2 ( A l a r m ) in on-hook state.
In case of already stored alarm, you may see stored alarm
and select from Options. ( Add / Edit / Erase )
In the absence of alarm, “There is no data” message
is displayed.
2. To enter new alarm,
1) Press A d d .
2) Enter time and date.
4.7.4 Calculator
Calculates simple mathematical computations.
1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) +
4 ( C a l c u l a t o r ) in on-hook state.
2. Use Navigation Key for the four arithmetical
operations.
left: +
lower: ÷
right: -
upper: X
*:.
# : Clear
43
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지44
4. Menu Tree
Menu Tree
3. Press O K for computing result of the
calculation.
4.7.5 World Clock
It is useful when you need to make a call to another
country, and you are not sure about the time
difference.
1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) +
5 ( W o r l d C l o c k ) in on-hook state.
2. Select the city by pressing navigation button.
4.7.6 Stopwatch
1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) +
6 ( S t o p w a t c h ) in on-hook state.
2. Select S t a r t .
Lap: Saves the lap time.
Stop: Stops the Lap.
44
View: Shows saved time (also stop time).
Reset: Deletes Lap time and returns to initial
screen.
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지45
5. Speaker Phone
Speaker Phone
This function is a convenient feature, which enables
you to make a call using the Speaker Phone (
button in on-hook state.
45
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지46
6. Troubleshooting
Please check the following items before contacting service center.
Troubleshooting
Item
Phone doesn’t operate at all.
Remedy
• Check that the phone is installed correctly.
• Check that the battery is fully charged.
• Check that the power is on.
Because of noise and cross talking,
call status is bad.
Keep away from electrical application such as TV,
When I press button to call, can’t hear the dial tone.
Check that phone cord or power is connected correctly.
Call cannot be received.
Check the current status of Rx call mode settings in data
computer, radio and so on.
settings menu. Voice option should be selected.
Battery fails to charge.
Check that the authorized adaptor (5V/1A) for LSP-710 is
correctly connected to the DC power connector of the phone
and Battery ON/OFF switchis ON.
Bell sound isn’t heard
If bell sound is low, please adjust the volume level and make
sure that Light Mode is not selected.
• The LCD repeats on and off when you plug-in
the adapter while battery switch is off.
• Phone repeats abnormally power-on and
power-off after a few second when you plug-in
the adapter while battery switch is on and
phone is power-off.
• There is no charging display when you plug-in
the adapter while the phone is power on.
46
Check that the adapter is the approved from LG-Nortel.
Adapter should be 5V(DC), 1A
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지47
7. General Information
Item
Tx Frequency
Rx Frequency
Channel Bandwidth
Tx Power
Rx Sensitivity
Size (mm)
Weight (gms)
Operating Temperature
LSP-710
Digital: 824 ~ 849 MHz
Digital: 869 ~ 894 MHz
1.25 MHz
Digital: LOWER: 200mW ~ UPPER:1.0W
-104dBm below (at FER=0.5%)
191X 156X 75 (L X W X H)
652gram
-10 ~ 50。C
General Information
7.1 Main Unit
7.2 AC/DC Adapter
Item
Rated Input Voltage
Operating Input voltage
Rated Input Frequency
Operating Input Frequency
Rated Output Voltage, Current
SMPS Type Description
AC 100 ~ 240V
AC 80 ~ 300V
50 / 60Hz
47 ~ 63Hz
5V(DC), 1A
47
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지48
7. General Information
General Information
48
7.3 Battery
Item
Capacity
Talk time / Standby time
Charging time duration
Description
3.7V Li-ion / 1400mA
4 Hours / 120 Hours
5 Hours (Standby condition)
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지49
LG-Nortel CDMA Fixed Wireless Phone LSP-710
Regulatory Statements to be included in the Users Guide for Sputnik
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
LG-Nortel CDMA Fixed Wireless Phone LSP-710
USA-Federal Communications Commission (FCC)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least
20 cm must be maintained between the antenna of this device and all persons.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Licensed by QUALCOMM Incorporated under one or more of the following Patents:
U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204
U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No. 5,107,225
49
LSP-710 EN_090416 2009.4.16 2:3 PM 페이지50
P/N : MMBB
APR/2009/ISSUE 1.0
PRINTED IN KOREA

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 50
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c7b134c5-98c1-4249-bc30-04b8d4cea762
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Create Date                     : 2009:04:16 14:04:27Z
Modify Date                     : 2009:04:27 18:01:13+09:00
Metadata Date                   : 2009:04:27 18:01:13+09:00
Creator Tool                    : QuarkXPress3.3k: AdobePS 8.7.3 (301)
Document ID                     : uuid:834454e2-2c11-479f-8bfb-59123871ccd7
Format                          : application/pdf
Creator                         : hs
Title                           : LSP-710 EN_090416
Author                          : hs

EXIF Metadata provided by EXIF.tools