Essence Security ES700IPD Indoor photo detector User Manual Microsoft PowerPoint ESS700IPD datasheetx
Essence Security International ltd. Indoor photo detector Microsoft PowerPoint ESS700IPD datasheetx
User manual
11 Indoor Photo Detector ES700IPD Detect and view events as they happen Product Specifications The perfect combination of motion detection and image capture functionality. It features: • A compact, indoor detector and photo verification device • Once armed, the ES700IPD captures a photo images upon PIR detection • Can be also triggered by a user request • Compressed stream of photos are sent via RF to the control unit, and from there to a designated recipient (security service provider, email account, etc.) • Full-color JPEG photos sent through the network to monitoring service or user email • Walk through mode when combined with a Magnet Switch • Wireless and battery-operated for easy, maintenance-free installation Lifestyle “Plug-&-Play” state-of-the-art Wireless security system: • User-friendly • Utilizes cutting-edge technology • Bidirectional RF wireless communication • Battery operated • Easy to install • Nonintrusive, state-of-the-art design NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Security International Ltd.) could void the user’s authority to operate the equipment. WARNING! To comply with FCC RF exposure compliance requirements, the device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. COMMUNICATION: • Bi-directional: End-to-End Bi-Directional ESI protocol • Advanced radio supervision algorithm • Up to 700 meters RF range (open air) • Modulation and Frequency: BFSK , 868.3 MHz for Europe or 916.5 MHz for USA • Encoding: 32-bit ID, over 4 billion combinations SECURITY: • Unique electronic serial number • Tamper alarm when tilted IMAGE CAPTURE: • Captured full-color JPEG photos (up to 5 frames/second) • Selectable Quality & Resolution: from 320x240 to640x480 • Illumination (for image capture in darkness/low-light): Super-bright white LED CAMERA: • VGA (640 x 480) pixel color CMOS camera • Shooting Angle (diagonal): 67° • Shooting Range: 10m / 32.8 ft. at daylight POWER: • Uses 3 standard AA Alkaline batteries, • Battery life of 3 years • DC-jack for an optional external power supply ADDITIONAL INFORMATION: • Detection Type: Passive Infrared • Insect Immunity: Sealed Optics • Pet Immune option SIZE and WEIGHT: • Dimensions: 123x60x60 mm / 4.9x2.4x2.4 In. (LxWxD) • Weight: 160 gr. / 0.35 lb. (batteries: 50 gr. / 0.11 lb.) ENVIRONMENT: • Operating Ambient Temperature range: -10°C ~ 55°C / 14°F ~ 131°F • Humidity: up to 95%, non condensing CERTIFICATION: • CE: CE mark, EMC/EMI according to ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996, EU Directive 1999/5/EC for R&TTE • Radio: ETSI EN 300 220-3, ETSI EN 300 220-1, CEPT/ERC Recommendation 7003, EN 50131-5-3:2005 + A1:2008 • Safety: EN/IEC60950-1, TUV : UL 60950-1 • Security & Alarm systems: EN 50131-1:2006 + A1:2009 Class-II Grade-2, EN 50131-2-2:2008 Class-II Grade-2, EN50131-6:2008 Type-C • Reliability (Mech. & Environmental conditions): EN 50130-5:1999 &IEC 60068 This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Certifications and approvals: For more information, go to: www.essence-grp.com © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : hadasma Create Date : 2014:01:08 11:22:10+01:00 Modify Date : 2014:01:13 16:25:15+02:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : hadasma Title : Microsoft PowerPoint - ESS700IPD datasheet.pptx Creator Tool : Microsoft PowerPoint - ESS700IPD datasheet.pptx Metadata Date : 2014:01:13 16:25:15+02:00 Producer : doPDF Ver 7.1 Build 327 (Windows 7 (Service Pack 1) - Version: 6.1.7601 (Platform: x64)) Document ID : uuid:2552db02-3a12-4fe3-98d8-6feaa9a1751e Instance ID : uuid:401e5b0f-f6d0-4fbb-b049-7c773a34c44d Page Layout : OneColumn Page Mode : UseNone Page Count : 1EXIF Metadata provided by EXIF.tools