Etekcity SE9 Bluetooth Headset User Manual 15 SE9 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3105923
Application ID	h2mdqFyY4mCQH+FFdmEHBg==
Document Description	15_SE9 UserMan.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.5kB (143787 bits)
Date Submitted	2016-08-21 00:00:00
Date Available	2016-08-21 00:00:00
Creation Date	2016-08-19 08:32:24
Producing Software	Microsoft Office Word 2007
Document Lastmod	2016-08-19 16:32:45
Document Title	15_SE9 UserMan.pdf
Document Creator	Microsoft Office Word 2007
Document Author:	Administrator

Instruction Manual
Model:SE9
FCC ID:2AB22SE9
Thank you for purchase this product, please read carefully before using.
Charging:
DC 5V 500mA for charging, Red indicator light on, charging start, Blue indicator light on,
charging finished.
ON/OFF:
Power on: Keep pressing the “
“POWER ON” voice prompt.
” button for more than 3 seconds, blue light on and
Power off: Keep pressing the “
“POWER OFF” voice prompt.
” button for more than 3 seconds, red light on and
Bluetooth Mode:
Pair: In the state of POWER OFF, keep pressing the “
” button to the red and blue light
flashing alternately, Pairing mode start. Search for Bluetooth device until find out “E26”,
select it, then the indicator keeps flashing slowly, pair successfully.
(Noted: if the pass code is required, please enter “0000”)
If you want to disconnect the Bluetooth connection and back to code match state, please short
press the “
” and “
” keys at the same time when no music playing.
Noted: 1. When the Bluetooth connection disconnect accidentally, short press the “
button, the Bluetooth will reconnect.
”
2. If you want to reset the connected Bluetooth devices list, please long press the
“
” and “
” keys at the same time.
Music Playing:
Short press “
” button，Play/Pause;
Short press “
” button, Volume decrease; long press “
” button, Previous song;
Short press “
” button, Volume increase; long press “
” button, Next song.
Voice Dial:
When in paired status, long press “
want to call.
” or “
” button, then say the name out you
Noted: Please make sure voice dial function is supported on your smartphone.
Call Mode :
In Bluetooth connected status, double click the “
While calling incoming, short press the“
the“
”button to pick up the call; long press
”button to reject the call.
On talking status, short press the “
“
” button to dial the last call again.
” button to hang up; long press the “
” or
” keys at the same time to mute the microphone, and long press the “
” or
“
” keys at the same time again to resume talking; double click the “
switch the telephone back and forth between the earphone and mobile phone.
” button to
Low Power Warning:
In working status, when the power is low, there will be a voice prompt “Battery low” and the
red indicator light will flash discontinuously
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2016:08:19 08:32:24Z
Creator Tool                    : Microsoft Office Word 2007
Modify Date                     : 2016:08:19 16:32:45+08:00
Metadata Date                   : 2016:08:19 16:32:45+08:00
Format                          : application/pdf
Creator                         : Administrator
Producer                        : Microsoft Office Word 2007
Document ID                     : uuid:0a6f89d9-d1ae-4983-9087-15a195e33ff6
Instance ID                     : uuid:137565a1-98b9-477f-82fb-7a76800802fd
Page Count                      : 3
Language                        : en-US
Author                          : Administrator

EXIF Metadata provided by EXIF.tools