Etiger Digital Technology ES-RC1 Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2387798
Application ID	YetO/RDo6aL4lyMzMl9i6Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.11kB (176382 bits)
Date Submitted	2014-09-14 00:00:00
Date Available	2014-09-15 00:00:00
Creation Date	2014-07-25 14:48:04
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2014-09-12 10:35:31
Document Title	Users Manual
Document Creator	Adobe InDesign CS6 (Macintosh)

Box Content
Usage
1 x Remote Control
1 x User Manual
Key
LED indicator
Arm
Home Mode
Disarm
ES-RC1
www.etiger.com
Register the remote control in the alarm system
Switch to Connection Mode on the control panel. Then press any key on
the remote control. The control panel beeps once: the remote control is
registered. If you hear two beeps, the remote control has already been
connected.
Images, illustrations and text are non-contractual. ETIGER and the ETIGER logo are
registered trademarks and the property of ETIGER.
Copyright © 2014 ETIGER. All rights reserved.
Standards
Operation
Function
Power Supply:
DC 3V (CR2025 button battery x1)
Housing material:
ABS plastic
Arm
Arms the security system
Operation current:
≤7 mA
Disarm
Disarms the security system
Transmission distance:
≤ 80 m (in open area)
Operating conditions:
Temperature: -10°C ~ +55°C
Relative Humidity: ≤80%
(non-condensing)
Panic
Before Using for the First Time
Remote Control
Specifications
Home
Mode
Arms all the sensors but the ones in
zone A. Sensors in zone A will not
trigger the alarm (Home Mode).
Panic
Triggers the alarm regardless the status
of the alarm system. The control panel
dials the stored phone numbers.
Arm
Arms the system silently
Disarm
Disarms the system silently
(in Mute mode)
(in Mute mode)
Radio-frequency:
315MHz (±75KHz)
Dimensions:
57 x 31 x 11 mm
This product bears the selective sorting symbol for waste electrical
and electronic equipment (WEEE). This means that this product must
be handled pursuant to European Directive 2002/96/EC in order to be
recycled or dismantled to minimize its impact on the environment. For
further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due to
the presence of hazardous substances.
This user manual is available in other languages at
www.etiger.com/eu/support
In compliance with European laws.
LED indications
Blinks once
Sends transmitting signal
Low light
Low battery, replace the battery immediately
This product was designed and manufactured in compliance with
Directive 2002/95/EC of the European Parliament and of the Council on
the restriction of use of certain hazardous substances in electrical and
electronic equipment (RoHS Directive - RoHS) and is deemed to comply
with the maximum concentration values set by the European Technical
Adaptation Committee (TAC).
Manufactured in China.
ETIGER EUROPE
Rue de la Loi, 25, 7100 La Louvière, Belgique
service@etiger.com
ES-RC1-UM-ENFR20140725-2.1-W
EN
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2014:07:25 14:48:04+02:00
Metadata Date                   : 2014:09:12 10:35:31+08:00
Modify Date                     : 2014:09:12 10:35:31+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:070a7d08-c1ca-4c45-9f71-4cf67797f55e
Original Document ID            : xmp.did:F77F1174072068119CEEC8AFD7236672
Document ID                     : xmp.id:3100324408206811822ACAB397719C5C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8795D8EF17206811822A902F74DC01A8
Derived From Document ID        : xmp.did:8595D8EF17206811822A902F74DC01A8
Derived From Original Document ID: xmp.did:F77F1174072068119CEEC8AFD7236672
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:07:25 14:48:04+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Page Layout                     : SinglePage
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools