Euro Communication EquipementS BTD3 BTD3 User Manual BTD3 manual

Euro Communication Equipement SAS BTD3 BTD3 manual

Manual

SuperTooth DISCO 3The portable Bluetooth A2DP stereo speakerwith 2 speakers on the front that you’ll be blown away by 12 Watt of high &outstanding quality audio!
Product DescriptionThe SuperTooth DISCO 3 is a portable wireless stereo speaker able to streammusic from any Bluetooth A2DP device, including iPhone, iPad – or even iPodTouch. It is equally compatible with other phones, Computers, and MP3 playersthat support Bluetooth A2DP.The SuperTooth DISCO 3 comes with 3.5mm stereo jack cable for the devicesthat do not support Bluetooth A2DPProduct OverviewExternal Controls Back ViewChargingCharging via Usb Cable1. Connect the Usb Cable to the DC 5V Usb Input found at the back of theSuperTooth DISCO 3 then connect the other end of the Usb Cable to yourComputer.2. The Charge Indicator will steady red while charging. When Charge Indicatorgoes green the charging is complete.2
Turning the SuperTooth DISCO 3 On and OffPower On: Press and hold the On/Off button for 2 seconds. A power on beepheard on speaker.Note: At first time use, turning on the SuperTooth DISCO 3 willautomatically go to pairing mode (ready to be pair).Power Off: Press and hold the On/Off button for 3 seconds. A power off beepheard on speaker.Pairing the Supertooth Disco 3 with your Bluetooth A2DPphone/devicePair the SuperTooth DISCO 3 to your phone/device to create the link or audioconnection between the two. Pairing should be done at first connection to aphone/device.Important: Make sure that your phone/device supports A2DP* (Advanced AudioDistribution Profile) and the last paired device is not visible before proceeding.Note: Any other device previously paired with the SuperTooth DISCO 3 must beturned off or its Bluetooth must be disabled before proceeding.1. From Off, Press and hold the On/Off button for 6 seconds until thePlay/Paused button blinks red fast. This indicates that the SuperTooth DISCO3 is ready to be pair.2. While the SuperTooth DISCO 3 is in pairing mode, access the Bluetoothmenu of your phone/device. Turn on its Bluetooth function then execute aBluetooth search to find the SuperTooth DISCO 3. (See your phone/device’smanual).3. When the phone/device displays the list of Bluetooth devices, select STDISCO3.4. When the phone/device asks for the password/pin code, enter 0000 andpress OK.5. Pairing is successful if the red LED indicator turns off (connected/standbymode).6. The SuperTooth DISCO 3 is now ready to use with your phone/device.*A2DP (Advanced Audio Distribution Profile) is a technology enabling to stream stereo sound from an audio source(phone, COMPUTER or laptop) to a stereo speaker or headset via Bluetooth. To do so both devices must support thisprofile.Using the SuperTooth DISCO 3 with your Bluetooth A2DPphone/device3
IMPORTANT: The SuperTooth DISCO 3 needs to be “paired” with yourphone/device first. Please refer to Pairing the SuperTooth DISCO 3 with yourPhone/Device.Streaming Music from an A2DP Phone/Device1. Go to your phone/device’s music player and play a track by pressing “Play”on your player or the Play/paused button on the Disco 3 for 1 second. If theSuperTooth DISCO 3 is connected, the music will be heard directly in thespeaker. See your phone/device’s manual if needed.2. Audio is now on the SuperTooth DISCO 3. At this point, the orangebackground LED turns steady indicating that phone/device isconnected/streaming with the SuperTooth DISCO 3.3. When connected, you will be able to control the music using the buttons onthe SuperTooth DISCO 3 (please refer to SuperTooth DISCO 3 ButtonFunctions for streaming A2DP music).Reconnecting the SuperTooth Disco 3 with a Bluetooth A2DP phone/devicealready pairedWhen you turn it On, the Disco 3 reconnects automatically with the latest paireddevice. When you leave the Bluetooth operating range, with the Disco 3 TurnedON, it disconnects. When you come back into the Bluetooth operating range,press Play / Paused Button for 1 second to reconnect the latest paired device.The Disco 3 beeps twice which means it reconnects to the phone.SuperTooth DISCO 3 Button Functions (for Bluetooth connections only)The following functions can be controlled using the buttons on the SuperToothDISCO 3.To do so, your phone/device must support AVRCP* (Audio/Video RemoteControl Profile), a technology enabling to control functions directly from theSuperTooth DISCO 3.For streaming A2DP MusicTo play a track, press the Play/Pause Button on the speaker for 1 second.To pause a track, press the Play/Pause Button on the speaker for 1 second.To skip to the next track, press the Forward Button on the speaker for 1second.To skip to the previous track, press the Backward Button on the speaker for1 second.To fast-forward a track at a specific point, press and hold the ForwardButton on the speaker then release to resume.To rewind a track at a specific point, press and hold the Backward Button onthe speaker then release to resume.4
To increase the volume level, press the Volume Up Button on the speakerfor 1 second or hold the button until reached the desired volume level.To decrease the volume level, press the Volume Down Button on thespeaker for 1 second or hold the button until reached the desired volumelevel.* Audio/Video Remote Control Profile is a Bluetooth profile that allows Bluetooth devices to control media playback onremote devices.Using the SuperTooth DISCO 3 with a non Bluetooth A2DP Mp3PlayerYou can connect directly an MP3 player via Stereo Line Input situated at theback of the Supertooth Disco 3.Connecting directly with a non Bluetooth A2DP MP3 player with theSuperTooth DISCO 31. Plug the audio cable into the Stereo Line Input found at the back of theSuperTooth DISCO 3 and the other end to the output of your music player.2. Press play on your music player to stream music directly to the SuperToothDISCO 3.3. Non Bluetooth devices won’t support Play / Pause / Previous / NextCommands from the Disco 2. Please use the buttons of your Mp3 playerdirectly.Clear settings or ResetTo clear the pairing settings of the speakerTurn the speaker to pairing mode (from off, press and hold the On/Off button for6 seconds until the red LED indicator blinks fast) then press and hold thePlay/Pause button for over 5 seconds until a beep heard. Pairing List is nowerased.To hardware reset the speakerPress and hold the On/Off button for about 30-35 seconds, then the speaker willturn off. This means that you successfully hardware reset the SuperTooth DISCO3.SuperTooth DISCO 3 SpecificationsBluetooth Compliance: Bluetooth version 4.0 specifications5
Supported Bluetooth Profiles: A2DP (Advanced Audio Distribution Profile) /Stereo music streaming / AVRCP (Audio/Video Remote Control Profile)Operating Range: 10 meters Bluetooth standardFrequency: 2.4 GHZBattery and Power:Music Playing Time (high volume level): 3 to 4 hoursMusic Playing Time (medium volume): upto 15 hoursStand-by time: upto 2000hoursCharging Time: 3 hours Battery Type: Lithium-Ion Power pack batteryAudio Features:Dual High efficiency speakers + bass reflex12 Watt RMS powerCompatible with any Bluetooth phone, computer or MP3 playerJack 3.5 auxiliary input for non Bluetooth A2DP MP3 players, iPods orcomputersWireless Play/Previous/Next/Pause/Stop/Volume control (AVRCP standard)aptX High quality Bluetooth audio codecSpecial Features:Low Battery/ Charging indicatorIlluminated controlsCan charge from the computer USBSize and weight:Height: 180 mmWidth: 108 mmDepth: 70 mmWeight: 546 gAccessories: 3.5 mm stereo jack cable and USB cable6
FCC/IC statements :Federal Communications Commission (FCC) StatementIndustry Canada (IC) Statement15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s)Operation is subject to the following two conditions :1)This device may not cause interference and2)This device must accept any interference, including interference that may cause undesired operation of the device.FCC/IC RF Radiation Exposure Statement :This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.End users must follow the specific operating instructions for satisfying RF exposure compliance. Thistransmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Euro-CB isunder license. Other trademarks and trade names are those of their respective owners.EnglishEnglishHerebyHereby, , EUROEURO COMMUNICATIONCOMMUNICATION EQUIPEMENTSEQUIPEMENTS, , representedrepresented byby XavierXavier MARCHANTMARCHANT, , CEOCEO, , declaresdeclares thatthat thethe SUPERTOOTHSUPERTOOTH BTD3BTD3, , MODELMODEL BT BTD3D3, , isis inin compliancecompliance withwith thethe essentialessential requirementsrequirements andand otherother relevantrelevant provisionsprovisions ofof DirectiveDirective 1999/5/ 1999/5/ECEC ofof thethe EuropeanEuropean ParliamentParliament andand ofof thethe CouncilCouncil ofof 9 9 MarchMarch 1999 1999 onon radioradio equipmentequipment andand telecommunicationstelecommunications terminalterminal equipmentequipment andand thethe mutualmutual recognitionrecognition ofof theirtheir conformityconformity..ForFor thethe wholewhole declarationdeclaration pleaseplease visitvisit ::httphttp ://:// wwwwww .. SuperToothSuperTooth .net/.net/ downloaddownload EuroEuro CommunicationCommunication EquipementsEquipements SasSasRouteRoute dede FoixFoix DD11711711 500 11 500 NEBIASNEBIASFRANCEFRANCE7
Déclarations FCC / IC : Commission Federale des Communications (FCC) Déclaration Industrie Canada (IC) 15,21 Vous êtes averti que les changements modications non expressément approuvés par la partie responsable de la conformité pourraient annuler l'autorité de l'utilisateur d'exploiter cet équipement. 15.105 (b) Cet équipement a été testé et jugé conforme aux limites pour un appareil numérique de classe B, conformément à la partie 15 des règles de la FCC / IC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé conformément aux instructions,peut causer des interférences nuisibles aux communications radio. Cependant, il n'existe aucune garantie que ces interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en éteignant et rallumant l'équipement, l'utilisateur est encouragé à essayer de corriger l'interférence par une ou plusieurs des mesures suivantes:- Réorienter ou déplacer l'antenne réceptrice.- Augmenter distance entre l'équipement et le récepteur.- Brancher l'équipement dans une sortie sur un circuit différents-de celui sur lequel est branché le récepteur. Consulter le revendeur ou un technicien radio / TV qualifié.Cet appareil est conforme a la partie 15 des regles FCC et aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'opération est soumise aux deux conditions suivantes: 1) Cet appareil ne peut causer d'interférences et 2) Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. FCC / IC Déclaration d'exposition aux radiations RF: Cet équipement est conforme aux normes FCC / IC limites d'exposition aux radiations dans un environnement non contrôlé. Les utilisateurs doivent suivre les instructions de fonctionnement spéciques dela conformité d'exposition aux RF. Cet émetteur ne doit pas être co-localisés ou fonctionnant en conjonctionavec une autre antenne ou transmetteur.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Euro-CB isunder license. Other trademarks and trade names are those of their respective owners.Français :Par la présente, Euro Communication Equipements, représentée par Xavier Marchant, Président Directeur Général, déclare que l'appareil SUPERTOOTHSUPERTOOTH BTD3BTD3, , MODELMODEL BT BTD3D3, , est conforme aux exigences essentielles de la directive 1995/5/EC du Parlement Européen et du Conseil du 9 Mars 1999 concernant leséquipements hertziens et les équipements terminaux de télécommunications et la reconnaissance mutuelle de leur conformité.PourPour lala déclarationdéclaration complètecomplète visitezvisitez ::httphttp ://:// wwwwww .. SuperToothSuperTooth .net/.net/ downloaddownload EuroEuro CommunicationCommunication EquipementsEquipements SasSasRouteRoute dede FoixFoix DD11711711 500 11 500 NEBIASNEBIASFRANCEFRANCE8

Navigation menu