EverPro Technologies FH2M HDMI2.0 Active Optical Cable User Manual 1

EverPro Technologies Company Ltd. HDMI2.0 Active Optical Cable 1

FIBBR F-H2M Product Introduction

1 FIBBR 4K UHD HDMI Cable PURE-Series F-H2M
2 CONTENTS 1 DESCRIPTION .......................................................................................................................... 3 2 FEATURE .................................................................................................................................. 3 3 INSTRUCTIONS ........................................................................................................................ 4 4 SPECIFICATION ........................................................................................................................ 4 5 APPLICATION ........................................................................................................................... 6 6 FIBER SPECIFICATION .............................................................................................................. 7 7 FIBER PERFORMANCE ............................................................................................................. 7
3 1 Description FIBBR Ultra series product is a HDMI active optical cable (AOC) with high performance, low power consumption and low cost. Using optical fiber to replace copper wire as the high-speed signal transmission medium, H2C can perfectly transmit 4k UHD image up to more than 50 meters. Compared with the traditional copper wire, H2C AOC is much longer, sof ter, more slim, with better signal quality and perfect EMI/EMC feature. Compared with other HDMI optical fiber transmission solution, H2C AOC is easy to use, has perfect compatibility, and no external power supply needed. 2 Feature 1) No electro-magnetic radiation, safe for everyone in the family. 2) Slim and flexible cable for wide range of applications. 3) High resistance against surrounding electro-magnetic interference. 4) Connect-Light enables easy cable installation. “Display” side lighting：When “Source” connection is ready and player is power on, the “Display” side lighting LED is on. When “Display” connection is ready, the lighting LED is automatically off.
4 3 Instructions 4 Specification Cable Length Catalog 1.5M～50M Interface HDMI type A pluggable - HDMI type A pluggable Speed 18Gbps Support 4k 60Hz UHD display Power No external power needed
5 Power Consumption 250mW Mechanical / Condition Cable diameter 4.6 mm Bend Radius 20mm Tensile Performance 100N Crush 200N Operating and Storage Temp -40 - 70°C
6 5 Application 1) Home Theater 2) High definition Video Meeting System 3) Medical Video System 4) High definition Video Surveillance System 5) Digital Signage and TV Wall
7 6 Fiber Specification No. Item Specification Comment 1：Sub-cable Fiber Fiber Bandwidth≥400MHz.km@850nm Cladding Diameter: 124.8±0.7um Cladding non-circularity: ≤0.8% Core/Cladding concentricity: ≤1um 4 core fiber, blue/orange/green/brown Coating White PVC coating Sub cable diameter: 0.95-1.0mm 2：Sub-Copper wire Twisted copper Twisted structure Coating PVC coating 7 copper wires: blue/orange/green/brown/grey/white/black Diameter: 0.72-0.74mm 3 Kevlar 4*1610dtex 4 Out coating Black POHF-0602 or Black KPW-5890 Out diameter: 3.75±0.1mm Thickness: 0.55±0.05mm Fiber attenuation ≤3.5dB/km@850nm Fiber Coating Printing EP HDMI V4 E235264 (UL) 80℃ VW-1 A1b POHF-cable No XXXXm Braided Coating PET, out diameter: 4.6±0.10mm 7 Fiber Performance
8 NOTE:  λ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu