Everspring Industry Co C125U 2.4G Wireless Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	313268
Application ID	YeqJX885FTb61DR84H0CZA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.28kB (90998 bits)
Date Submitted	2003-03-26 00:00:00
Date Available	2003-03-26 00:00:00
Creation Date	2003-03-11 01:22:36
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2003-03-11 01:22:55
Document Title	User Manual
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

. H ME
cl25U/Cl27u 2.4G WIRELESS CAMERA KIT
Installation and Operating Manual
INTRODUCTION
The 2.46 Wireless Camera is designed to provide safety,
security, convenience to your home and business. At home.
it sees and hears baby's room, gamge, or any other room
from somewhere else in me house. In business. it monitors
entry/exit ways, reception area, storage-rooms. warehouses
from one central location. It is so user-friendly that you can
complete the installation in a few minutes.
The components included in the 2.4G Wireless Camera KIL
0 1 x Camera Unit build in 2.4G transmitter With
pre»wired 2M power cord
1 x AN Receiver Unit build in 2.46 receiver
1 x 7.5V 200mA AC adapter (tor camera unit)
1 x 12V 500mA AC adapter liar Receiver unit)
3-teet SCART to RCA (European) or RCA to RCA
(USA) cable
- Fixing and Owner’s manual
CAUTION
0 Do not attempt to ogn the sealed camera case: as this
will destroy its weather resistance propertis and void
the system‘s warranty.
0 Dlsconnect the systegLAIlwlays disconnect the system
from your mains power supply during installation.
0 Keep a light source during nighttime. The amen cannot
work In total darkness. Please bear In mind the camera's
viewing area must be illumlmted with a suitable light
source.
a Avglg m camgra miming dlrfl at a is!!! source. When
Installing the camera outdoor. you should ensure that
the semen lens will r—“x \ fl
not become dusty ..
easily, and the camera
does not point {0 I
directly at ‘ght
source lea. direct
lighting, or sun light), as the picture quality will be
Impaired. Additionally, the camera must be positioned so
that it will not point directly into the sun (sunrise or
sunset) or any bright light, as this may cause damage to
the salmon. The best viewing angle is achieved at
greater heighs leg. 2.5 to 3m) with the camera pointing
down. Also,
avoid viewi 9
areas wh re halt
the area i ‘
bright sunlight
and the other
hall is dark.
o Test beiore you
mountin our camera rrnanentl . it is recommended
that before mounting your camera permanently, you
temporarily connect your system to your television or
monitor. You can then test your system and determine
the best position for your camera.
0 Do not over ti hten the camera. Your camera is lully
adjustable both horizontally and vertically via a ball and
socket joint. which is secured with a tension screw.
The tension screw can be locked into position using the
Allen key supplied once your installation is complete.
Do not over tighten as this may stop you from loosening
the screw to make any slight adjustment in the future.
Retain the Allen key for future use.
i Your camera has been designed to prevent
condensation when installed outside or in damp
conditions. For this to work correctly the camera
should be left connected to the main power supply and
switched on permanently.
INSTALLATION
Step 1: Install the camera:
Having tested your camera and being familiar with the
temporary test set, you can assess the best location for the
camera. Ideally you will need one person to hold the
camera and another person to look at your television when
adjusting the position.
i.
You can mount the camera on the wall or ceiling according to
your need.
a. Connect the 7.5VDC ZDOmA power adapter with the /'
camera by plugging the power jack into the jack of-
prewired power cold from camera.
b. Use the fixing template provided to mark the position at
the two fixing holes (on the wall or on the ceiling.) Drill
two 4mmdlameter holes at the marked iocattonl, fully
insert the plastic wall plugs supplied, then thread a
supplied screw into each plug. letting the heads extand
about 5 mm from the wall,
Anlmna
‘lensien
Sclrw
Comma
[Ins
Van-col
Adluslmem
c. Must the antenna to 90" horizontally. And take off the
plastic cover on the right side of the camera bracket.
6. Adjust the Channel Switch knob on the right side of the
camela bracket to set up a channel (channel 1.23.4). And
remember which channel you selected.
e. Put the plastic cover back to the right side of the camera
bracket.
6. Plug power adapter into your main power supply. You'll
see the red LED indicator is illuminated permanently while
power is connected from the tram end of Camera.
Step 2: Install the receiver
Euro ean Version 77 American Version
5 iPl 7 7
car ug Iv VIDEO(Y&”OW)
AuDlDlWhlle)
..,., . ViDEO(VeIIow) 7— 7 vim OlvelIUWi
Adapter "
lzovlsohzlAmericanl
" 1
AUDIOlWhlIe) a, AUDlOiwmle) 7....
Adapler
. 230V150HxiEnlopean)
. 240VISOHZlSothAIll£ani
on i “6" Channel “G”
anrle , , .
Selecl Antenna SEMEI i Anlenila
7 7 77 Receiver 7 77 77 4 7 77 7 7 7 7 '7Receiver7’ 77 7 7
Connect your Receiver unit directly to your TV via SCART Connect your Receiver unit direclly to your TV via RCA to
to RCA cable package provided. RCA cable package provided.
1. Plug the Scart plug inlo your TV Scart socket.
2. Plug the olher end, yellow (video), while (audio) into lhe
corresponding RCA connectors on lhe receiver. And connectors (video and audio inputsi on the TV or
switch on your TV. monitor
3, Connect lhe Receiver unil with the power adaplor, and 2. Plug lhe yellow (video) and while (audio) RCA
1. Plug lhe yellow (video) and while (audio) RCA
connectors into lhe corresponding colored RCA
then plug the power adaptor into your main power connectors into the corresponding RCA connectors
supply. You’ll see lhe Power LED ol lhe Receiver umt will on lhe receiver.
be ON. 3. Connect the Receiver with the power adaptor, and then
4. Adjust the antenna or the receiver lo 90“ horizontally. plug lhe power adaplor into your main power supply.
Also adjust Channel Switch at the channel you select on You'll see the Power LED of the Receiver unit will be ON.
Camera. 4. Adjust the antenna of the receiver to 90° horizontally.
5. To view the picture. simply select the AUXILIARY or AV Also adjust Channel Switch at the same channel you
channel on the TV. This may be identified as AV or AUX select tor Camera,
or EXT, but Is sometimes daslgnalgd by the symbol 5.10 vtew the picture. simply switch the TV channel to the
Q external audio/video channel, 9.9. AV1, 2 or 3, depending
__7_ __ _7_ _____ _ __ on which channniyoll connect. |
It In doubt, refer to your television instruction manual, Your television is now ready and you will watch whatever your
camera sees and nears on your television screen
PLEASE NOTE: Ii you hear a loud howling noise it is because the camera is in the same room as the television, the
camera‘s sensitive microphone will cause audio teedback. To avoid this, turn your television volume down or adjust
the camera to a more appropriate angle/position.
SPECIFICATIONS
03127 CC125
Black 6 White Colour
CCIRIEIA PALINTSC
240 320
CCIR: 352 x 288 CCIR EIA: 320 x 240 EIA PAL: 528 x 582 NTSC: 510 x 492
_ ”E to 116000 Sec. Up to 1115000 Sec. __7
i=3,6mm F=2.0 i=4.3mm F=2.D
62“ , Diagonal 76° . Diagonal
0.5 Lux @F1.4 < 3 Lux @F1.2
>46dB >4BdB
Camera Angle Left & Right 87: 2°
Up 2" Down 45“
Microphone Built-in
2.4(377ch_annel - 7 7 7 777z7473quu434MHz/2453Mliz12411Ml-lzzllmKHz
Power Adaptor (American) ACIZoV/DCISV, 200mA (without Regulator)
(European) _ ACZJQKIDCISV, ZOOmA (without Regulator)7
Ftéceiver We are", CA113
Power Adapter input 120V160H1(Americant ZJOVIstIHz (European) 240Vi§0HxiSnulh Atrican)
Power Adagter 70ulgul7 '7 7 77 127VDC $00mA '
" Specifications are subject to change and improvemenl without notice - (C) 2002 Everspring Industry C0 , All Rights Reserved
(G 0678® NL/DK/CH/S/B/L/D
Id
-9M
U pward Fixed Drawing
6M
$ $
Backward Fixed Drawing
CC125 Drill Hole Draw
INC125UEVSPEA
.. A..,‘.......~.,,w_¢m:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:03:11 01:22:55+08:00
Create Date                     : 2003:03:11 01:22:36+08:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 3
Mod Date                        : 2003:03:11 01:22:55+08:00
Creation Date                   : 2003:03:11 01:22:36+08:00
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Metadata Date                   : 2003:03:11 01:22:55+08:00

EXIF Metadata provided by EXIF.tools