Evervictory Electronic COOLER445 Cooler Amplified BT speaker System User Manual x

Download:
Mirror Download [FCC.gov]
Document ID	3158056
Application ID	fpT5wf6hd+rVy9wpac4upg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.32kB (104016 bits)
Date Submitted	2016-10-08 00:00:00
Date Available	2016-10-08 00:00:00
Creation Date	2016-09-26 10:28:43
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2016-09-26 10:28:43
Document Title	Microsoft Word - User Manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	brown

Cooler Amplified BT
speaker System
COOLER‐445
Included Accessories:
DC Cigarette Lighter Adapter (5m)
Connect the supplied power cable
before continuing
Power ON
Press the Power Button (2)
Power OFF
Hold the Power button for 5 seconds and
release
Adjusting Volume
Press Volume Up ③ to increase the
volume
Press Volume Down ① to decrease the
volume
Source Switching
Press the Power (2) button to switch
between Bluetooth and Aux input
(!) If an Aux device is connected, the
source will switch to Aux.
Output Modes
Press and hold buttons (2) and (3) to
switch between loud and super loud
Output Mode
Loud
Super Loud
LED ON
Battery Indicator
Shows the current DC power status.
(!) The LEDs will blink Red when the
connected DC Power supply is low
Bluetooth Pairing
Bluetooth is discoverable when PWD‐CB1
is powered ON.
Search for Alpine PWD­CB1 using a
Bluetooth compatible device. Once
connection is established, the Bluetooth
and Indicator Bar will be ON
Source
Audio and DC inputs are waterproof
when the cover is securely closed.
Bluetooth and
Battery Indicator
LED
Color
Audio Input (1)
Blinking
Blue
Connect an audio device using a 3.5mm
stereo headphone adapter.
ON
Blue
Audio Output (2)
ON
Green
Bluetooth
Pairing
mode
Bluetooth
Paired
Aux Input
Source Switching
Press the Power (2) button to switch
between Bluetooth and Aux input.
Use a 3.5mm Stereo M/M plug to connect
two PWD‐CB1 together.
(!) Connecting headphone will cause
damage to hearing and may damage the
amplifier
DC Power In (3)
Connect the supplied cigarette lighter
power cable.
(!) Caution: keep clear from any liquids or
objects
Important Safety Instructions
1. Read Instructions – All safety and
operation instructions should be
read before the product is used
2. Retain Instructions – The safety
and operating instructions should
be retained for future reference
3. Heed Warnings‐ All warning on the
product and in the operating
instructions should be adhered to.
4. Follow supplied operational
instructions.
5. Disconnect any power sources
before cleaning.
6. Clean using a mixture of dish soap
and a light abrasive brush on the
cooler.
7. Do not use a pressurized water
source to clean.
8. Only use Alpine recommended
accessories, failure to do so may
cause injury, or damage to the
product.
9. Keep the PWD‐CB1 in a well
ventilated area to ensure reliable
operation and to prevent
overheating.
10. Place cooler on a stable surface to
avoid bodily injury or damage to
the cooler.
11. Do not alter the power cord in any
way form or fashion.
12. Route the power supply cords so
they will not be compressed,
pinched or bent. Secure the cord if
necessary.
13. Do not overload any outlets or DC
supplies as this will result in an
increased risk of fire and/or
electric shock.
14. Use recommended rated fuses only.
This equipment has been tested and found to comply
with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
changes or modifications not expressly approved by
the party responsible for compliance could
void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : brown
Create Date                     : 2016:09:26 10:28:43+08:00
Modify Date                     : 2016:09:26 10:28:43+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.docx
Creator                         : brown
Document ID                     : uuid:acad5741-236d-4e95-a96f-725801bd41fc
Instance ID                     : uuid:63224d4e-750c-4c35-b0fd-779156e5017f
Page Count                      : 3

EXIF Metadata provided by EXIF.tools