Evervictory Electronic TR1073ZE1050D Automotive LCD Monitor with DVD Player User Manual Manual
Evervictory Electronic Company Limited Automotive LCD Monitor with DVD Player Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 874587 |
| Application ID | KpV8iQZF958I4ZNtsyGyrA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.05kB (813144 bits) |
| Date Submitted | 2007-12-02 00:00:00 |
| Date Available | 2007-12-02 00:00:00 |
| Creation Date | 2007-10-29 08:12:50 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2007-11-28 15:54:41 |
| Document Title | Manual |
| Document Creator | Acrobat PDFMaker 7.0 for Word |
| Document Author: | tan |
10.2” TFT LCD Monitor with DVD Player TR-1073 User manual Please read it carefully before you operate this player Welcome Thank you for buying the Roof Mount LCD Monitor with DVD player. Please read this manual carefully before using the Roof Mount LCD Monitor with DVD player in order to get the most out of all the features and functions. Keep this manual in a safe place, as it can be a valuable tool in helping you to understand all the features and functions. Contents Safety information.........................................................................1 DVD player features .....................................................................3 Setting up your DVD player ..........................................................7 Using your DVD player .................................................................10 Troubleshooting ............................................................................13 Specification..................................................................................14 Maintaining ...................................................................................15 Operation flow………………………………………………………….16 Safety information Do not operate the unit in any way other than described within this manual. Failure to follow the instructions within the manual will invalidate your warranty. SAFETY FIRST! Do not install the display where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including airbags, or (iii) impair the driver’s ability to safely operate the vehicle. When using the system, make sure you are firmly secured by your seat belt to ensure you do not accidentally hit your head on the screen during sudden braking or other incidents. If you are ever in an accident, injuries can be more severe if the seat belt is not properly buckled. Do not attempt to install or service your display by yourself. Installation or servicing of the display by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. Be careful not to drain the car battery while using the unit with the car engine stopped. To avoid draining the battery, it is suggested that the vehicle engine always is running while using the unit. Do not disassemble or alter the unit in any way. Failure to do so can cause damage to the unit and invalid the warranty. Never clean the surface of the screen with chemical solvent or corrosive detergent, which may cause permanent damage to the TFT LCD screen. Avoid installing the unit wherever is under direct sunlight or near hot air vent. Please note that the normal working temperature of the unit is between -5℃ to +50℃. If the internal temperature of the vehicle is extremely high, a short cooling down period is necessary before operating the unit. W If the temperature inside the car is very low and the monitor is used soon after switching on the heater, moisture may form on the panel of the unit. Turn off the unit immediately! Failure to do so may cause the internal components to short. Allow the unit to rest for about one hour to allow the condensation to disappear before continue operation. In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark. It is not a malfunction. The unit will work normally once it reaches its operating temperature. Do not drop or hit the LCD panel with a hard object, as it may cause permanent damage to the LCD panel. Should LCD panel break, avoid touching glass and fluid. If do, please clean it with plenty of water and ask for medical attention immediately. Due to different car specifications, please kindly ensue that the display monitor is properly located and not obstructing the air-conditioning vent. Avoid inserting any foreign objects into the slot of the disc Player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. Protect your disc. When you leave the car, be sure to eject the disc from this unit and store it separately away from direct sun light. Heat and humidity may damage the disc and you may not be able to play it again. Use the supplied screws to fix the monitor Metal Mounting Plate. FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject of the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. DOLBY: Manufactured under license from Dobly Laboratories. “Dolby” and the double-D symbol are trademarks of Dobly laboratories. DVD player features This player is a Roof Mount 10.2" TFT-LCD Color Display with DVD player that can be used as a stand-alone display, or can be integrated into a mobile multimedia system. This player has the following features: 10.2" TFT-LCD color monitor (16:9) Roof Mounting Application Pixel (dots): 800RGB(W) x 480(H) Wide Viewing angle (up/down/left/right): 45/55/65/65 NTSC and PAL Compatible Adjustable Color/Contrast/Brightness/Tint Manual Viewing Angle Adjustment W Vertical Adjustable: up/down>1500 Yellow LED Dome Light Automotive Startup Protection Built-in IR Transmitter for IR Wireless Headphone IR Remote Control On Screen Display 2xAV Input 2xAV Output Slot-in DVD mechanism Capability to read: DVD Format /DVD±R/DVD±RW/CD-DA/CD-RW/MP3/VCD/SVCD Audio output-FMT: The unit shall have a built in FM Transmitter and an additional Line Audio Out for FMM, with switched12volt control line FM Transmitter for listening the audio from your car audio system via FM radio receiver (setting frequency: 88.1~107.9MHz) Note: Multi-session CDs and 320kbps WMA files cannot be played on this player. DVD VIDEO FEATURES This unit provides the following functions in addition to high image quality and sound quality of DVD video: Multi-sound Function DVD audio can store up to 8 languages for one film. This allows for the selection of language of ones preference. Multi-angle Function A DVD video that is filmed from multiple angle which allows you choosing to view from different perspectives. Subtitle Function A DVD video can record subtitles for up to 32 languages to choose from. DISC PLAYBACK This DVD player can play the following formats. About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the second session is the Data session. Your personally-created CDs with more than 2 data sessions recorded cannot be played on this DVD Video Player. MP3 Playback This unit can play back CD-R/CD-RW discs on which MP3 music data have been recorded. Region Numbers The DVD Video System assigns a region number to DVD video player and DVD disk by Sales area. The DVD video region number is marked on the disk Jacket as shown below. Ex. DISPLAY 1. Reset button: Press with a pencil or other narrow-tipped tool to rest the player. 2. Dome Light: Provides an interior light for the vehicle. 3. : Press to eject the disc. 4. : Press 5. to play or pause a disc. : Press to move cursor left or skip the previous chapter on DVD or track on CD; 6. ENTER: Press to confirm the items or settings. 7. ▲: Press to move cursor up; Press and hold it to fast reverse playback at 2x, 4x, 8x, 16x and 32x speeds. 8. IR window: Receives IR signals from the remote control and sends IR signals to IR wireless headphone. : Press to move cursor right or skip the next chapter on DVD or track 9. on CD; 10. ▼: Press to move cursor down; Press and hold it to fast forward playback at 2x, 4x, 8x, 16x and 32x speeds 11. SOURCE: Press to switch DVD PLAYER, INTERNAL GAME and EXTERNAL DVD. 12. In the FMT mode, press to turn on or off FM transmit Hint: Please slide the switch of the player back to the FMT position. In the FMM mode, press to switch audio output mode speaker or IR headphone. Hint: Please slide the switch of the player back to the FMM position. 13. Panel open button: Press to open the LCD panel. 14. LCD screen shut off switch: Press to turn off the LCD screen 15. AVX IN: Use to the extra audio or video input. 16. Dome Light switch: Move to the ON/OFF position, then press it to turn the dome light on or off. This function can be operational only when the green wire of the dome light is connected to the door sensor. The dome light will switch off after the car door is closed. Setting up your DVD player PACKAGE CONTENTS Name of parts Quantity Player IR remote control with battery AV cable ST4.2x16 screw CM 4x10 screw Metal mounting plate User’s manual Rubber gasket Use only the contents of this package to install and use the DVD player. Use of any accessories not provided with this player may result in damage to the player. Installing your DVD player Note: Do not attempt to install or service your player by yourself. Installation or servicing of the player by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. Wiring and connections To install the player 1. To prevent short circuits, remove the key from the ignition and disconnect the terminal of battery. 2. Attach the metal mounting plate to the roof using the screws. 3. Connect input and output cables. 4. Connect the wire harness in the following order: ground wire, battery wire, ACC wire and door wire. 5. Attach the DVD player to the metal mounting plate using the CM 4x10 screws. 6. Reconnect the terminal of the battery. Cutting the headliner and mounting the bracket. STEP1: LOCATE THE MOUNTING POSITION Using masking tape or chalk, mark the side-to-side centerline of the headliner. Next, mark forward to aft position, which locates the display as far forward as possible, but rearward of the front seats. STEP2: CHECK THE CONTOURS Using the cutout template located in the mounting position from Step 1, check the headliner for contours. Contours in the headliner will require modifications to the trim ring. For extreme contours, you may need to use an optional tall trim ring. Modifying the trim ring to follow the contours is required to avoid problems ranging from no disc eject to poor latch retention. STEP3: CUT THE HEADLINER Once you are satisfied with the location, using the cutout template cut the openings for the cabbies and four mounting screws. You may also need to cut an opening to slide the mounting bracket through the headliner. Notes: Do remember to connect the red wire to the ACC of the ignition switch. Or the battery charge might be drained off prematurely. If the fuse is opened, first make sure that the cables have not caused a short circuit, and then replace the old fuse with a new one of the same ratings. Do not have unconnected cables or terminals touch the metal on the car or any other conducting material. To prevent short circuits, do not remove the caps from unused terminals or from the ends of the unconnected cables. After the display unit is installed, check and make sure the brake lights, blinkers, wiper, etc. on the vehicle are working properly. Insulate unconnected wires with vinyl tape or other similar material. Using your DVD player Adjusting the DVD player To open the DVD player 1. Press Open Button to unlock the LCD panel. OPEN BUTTON 2. Swing the DVD player downward to the desired angle. Caution The LCD display opens to a maximum angle of 120° degrees. Do not attempt to open it further. 120° 10 To close the DVD player Swing the LCD panel upward until you hear the lock click. close CAUTION Make sure that cords and other items do not get caught in the panel when you close it. For your safety, be sure to close the LCD panel when not use it. Using remote control 1. Pull out the battery holder. Follow the arrow 1 slide it to the right toward the battery while at the same time pull the battery holder away from the remote control. 2. Place the battery. Place the new lithium battery with the (+) side up. (The type of battery: Crd2025) 3. Push the holder back. Using the finger to push in the holder back until the locking sound is heard. 11 4.Aim the IR Remote Control directly at the DVD player, then press any button. Note Use the remote control only inside the vehicle Use the IR Remote Control no further than five feet( 3 meter) from the sensor. Direct sunlight or very bright light reduces sensitivity to the remote signal commands. Be sure the player is not located in direct sunlight. Any obstruction between the remote sensor and remote control may disrupt reception. Replacing the battery If the remote control does not function, or if the operating range becomes reduced, replace the old battery with new one. Note 12 Dispose used battery properly. Do not misuse battery by shorting the positive + and - negative terminal or put into fire which may cause the battery to explode. Battery and battery holder can be a choking hazard. Keep the remote control away from young children. Troubleshooting If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the unit on and off. If the unit does not respond, press the reset switch on the Front Panel. Problem Cause Disc inserted incorrectly Player does not play disc Disc format is not supported Disc is dirty or scratched The player suddenly stopped working Player error or the screen went black Solution Reinsert the disc with the label side up(facing the ceiling). Check the disc format. Clean or replace the disc. Try turning the player off and on. If the player still doesn’t respond, press the reset button. Insert the key into the ignition and turn it to Player doesn’t ACC/Accessory. turn on Wait for about one hour or Condensation in the player until condensation evaporates. Battery needs replacing Replace the battery. Clean the player’s and the Dirty IR window on the Player operates remote control’s IR Player or remote control erratically windows. Check and tighten all Loose connections connections. Picture Skips Disc is dirty or scratched Clean or replace the disc . Occasions The car ignition (or ACC/Accessory) is off Blur picture on the screen. Interfered by short-distanced strong interference. (E.g. high voltage wire, transformation station or aircraft etc…) Move the vehicle away from the interference. 13 Problem Cause Solution 1. This is the characteristics of LCD display in low temperature, it will restore to normal brightness after starting the display for few minutes. 2.Adjust the brightness setting. The picture on the screen is dark. 1. The equipment locates at a low temperature area. 2. Brightness is set too low. No sound can be heard from the IR wireless headphones. 1. Headphones are not 1.Turn on the headphones. turn on. 2. The battery in the 2.Replace or recharge the headphone is low. batteries. 3. There is object blocking 3.Remove the blocking the transmitting module object or move back to the receiving area. or beyond the effective receiving area. Specification Design and specifications are subject to change without notice. Power Source Vehicle battery (DC +10V ~ +16V) Operating Voltage DC +14V Mechanism Manual Open / Close Display Angle Vertical Adjustable: Up/Down>150° Pixel 800RGB(W)x480(H) Viewing angle(up/down/left/right) 45/55/65/65 Operating current <2000mA(Typical VDD=14V) Dome Light 2W Operation Temperature -5℃ to +50℃ Storage Temperature -20°C to +70°C 14 Maintaining Handling discs To keep a disc clean, do not touch the play side (non-label side) of the disc. Do not attach paper or tape to the disc. Keep the disc away from direct sunlight or heat source. Store the disc in a disc case after playback. Cleaning discs Before playback, wipe the disc outwards from the center with clean cloth. LCD Panel Maintenance Wipe off any dust gently with a soft, dry cloth. The surface is easily scratched; do not rub it with hard objects. Do not use any chemical solvent, cleaning agent or corrosive detergent to clean away dirt on the surface of the screen. 15 z-Series CPM/Remote Control Reference Table DVD PLAYER INTERNAL GAME Ejects the Disc Play or pause playback of the internal Does nothing. DVD PLAYER In Menu Mode: Navigation UP In Playback Mode: Fast Forward through all In FMT/FMM control mode: toggles steps for each button press. In FMT/FMM between FMM/FMT On and Headphones control mode: toggles between Only. In picture tuning mode: FMM/FMT On and Headphones Only. In Navigates option settings. picture tuning mode: Navigates option EJECT PLAY/PAUSE UP settings. PRESS & HOLD Bring up FMT or FMM control OSD and FOR 2 SECONDS function. CPM BUTTONS In Menu Mode: Navigation DOWN. In Playback Mode: Fast Rewind through all In picture tuning mode: Navigates option settings. steps for each button press. In picture tuning mode: Navigates option settings. LEFT In Menu Mode: Navigation LEFT In Playback Mode: Fast Rewind. In FMT mode: Changes stations downward. In picture tuning mode: Decreases option levels. In Menu Mode: Navigation RIGHT In Playback Mode: Fast Forward In FMT mode: Changes stations upward. In picture tuning mode: Increases option levels. RIGHT ENTER ** In Menu Mode: Menu Action Confirmation. In Playback Mode: Does Nothing. In FMT/FMM control mode: clears OSD and exists function. SOURCE DOMELIGHT 1st Press 2nd Press PLAY CHAPTER BACK FAST REWIND FAST FORWARD CHAPTER NEXT SPEAKER EXT FMM: Off EXT FMM: On RES MUTE EJECT SOURCE UP REMOTE BUTTONS ENTER RIGHT SETUP DOWN DISC MENU DAY/NIGHT Single Press Press & Hold for 2 seconds. SUBTITLE In FMT/FMM control mode: clears OSD In FMT/FMM control mode: clears OSD and exists function. and exists function. INTERNAL GAME Power OFF system to Standby Mode Power ON system. AUXILIARY 1 Pause or Step playback of the internal Does nothing. Does nothing. DVD PLAYER MPEG pre-stop. Does nothing. Does nothing. MPEG stop. Does nothing. Does nothing. Start or Resume playback of the internal Does nothing. Does nothing. DVD PLAYER Chapter back to previous chapter Does nothing. Does nothing. Fast Rewind through all available FR Does nothing. Does nothing. steps for every press. Fast Forward through all available FR Does nothing. hi Does nothing. hi steps for every press. Chapter forward to the next chapter Does nothing. Does nothing. Display "Speaker Sound on FM xxx.x" or "Headphone Sound Only" Display "Speaker Sound Enabled" or "Headphone Sound Only" Toggles throught the DVD surround Does nothing. Does nothing. settings. Mute or Un-Mute audio and display correct OSD. Ejects the Disc Change source to INTERNAL GAME Change source to AUXILIARY 1 Change source to DVD PLAYER In picture tuning mode: Navigates option settings. In picture tuning mode: Navigates option settings. Does nothing. Does nothing. Does nothing. Does nothing. In picture tuning mode: Decrease option levels. In FMT control mode: Scrolls down through FMT stations. In picture tuning mode: Decrease option levels. In FMT control mode: Scrolls down through FMT stations. In FMT/FMM control mode: clears OSD In FMT/FMM control mode: clears OSD and exists function. and exists function. In Menu Mode: Navigation RIGHT In In picture tuning mode: Increase option In picture tuning mode: Increase option picture tuning mode: Increase option levels. In FMT control mode: Scrolls up levels. In FMT control mode: Scrolls up levels. In FMT control mode: Scrolls up through FMT stations. through FMT stations. through FMT stations Toggle between the WIDE ZOOM (16:9), STANDARD (4:3), and WIDE (16:9) display modes for each press. Bring up picture adjustment settings menu. Access the DVD PLAYER mpeg setup Does nothing. Does nothing. menu. In Menu Mode: Navigation DOWN. In In picture tuning mode: Navigates In picture tuning mode: Navigates picture tuning mode: Navigates option option settings. option settings. settings. Acces the DVD's main or root menu. Does nothing. Does nothing. Toggle back and forth between the DAY-TIME and NIGHT-TIME brightness level settings. Used for entry of backdoor commands, parental codes and chapter/track direct entry selection. Does nothing. Toggle dome light ON and OFF. DOMELIGHT In FMT mode: Changes stations upward. In FMT mode: Changes stations upward. In picture tuning mode: Increases In picture tuning mode: Increases option levels. option levels. DVD PLAYER Enable and scroll through with every press, the available disc zoom modes of the MPEG. In Menu Mode: Navigation LEFT In picture tuning mode: Decrease option levels. In FMT control mode: Scrolls down through FMT stations In Menu Mode: Menu Action Confirmation. In Playback Mode: Does Nothing. In FMT/FMM control mode: clears OSD and exists function. LEFT In FMT mode: Changes stations downward. In picture tuning mode: Decreases option levels. Change source to DVD PLAYER DVD info display: Title Remain, Chapter Elapsed, Chapter Remain, etc. DISC ZOOM In FMT mode: Changes stations downward. In picture tuning mode: Decreases option levels. Used for entry of backdoor commands, parental codes and chapter/track direct entry selection. Enables and toggles through the DVD's subtitle features. Does nothing. Does nothing. Used for entry of backdoor commands, parental codes and chapter/track direct entry selection. INFO In picture tuning mode: Navigates option settings. Change source to AUXILIARY 1 Toggle dome light ON and OFF. In Menu Mode: Navigation UP. In picture tuning mode: Navigates option settings. INFO DISPLAY RES Bring up FMT or FMM control OSD and function. Change source to INTERNAL GAME Pod is OFF Pod is ON PAUSE STOP In FMT/FMM control mode: toggles between FMM/FMT On and Headphones Only. In picture tuning mode: Navigates option settings. SOURCE DOWN POWER Bring up FMT or FMM control OSD and function. AUXILIARY 1 Does nothing. Does nothing. ++ DISPLAY SETUP DISC MENU SUB TITLE In this mode: CPM UP, DOWN, LEFT, and RIGHT buttons perform the same funciton as REMOTE UP, DOWN, LEFT and RIGHT buttons. Press and Hold of the Left or Right buttons during picture tuning mode scrolls quickly through the setting parameters. RIGHT/LEFT Changes each SETTING VALUE RIGHT/LEFT Changes each SETTING VALUE RIGHT/LEFT Changes each SETTING VALUE RIGHT/LEFT Changes each SETTING VALUE Clear menu after 5 seconds of no activity Clear menu after 5 seconds of no activity Clear menu after 5 seconds of no activity DOWN note: Clear menu after 5 seconds of no activity DOWN note: DOWN note: DOWN note: UP DISPLAY UP DISPLAY UP DISPLAY UP DISPLAY DISPLAY PRESS & HOLD 2 SECONDS NO SWITCH set to Internal FMT ? Press & Hold CPM UP Button for 2 seconds YES Mute Button Clear OSD after 5 seconds Speaker Button switch to 16:9 mode note: DISPLAY MODE: WIDE note: CPM DOME LIGHT Turn DOME LIGHT On or Off note: enable FMT+5V Recall last saved station. Day/Night Button CPM SOURCE INTERNAL GAME button DAY-NIGHT CPM SOURCE note: note: note: note: MUTE note: Turn OFF FMM+12V note: Clear OSD after 5 seconds of inactivity or ENTER press Headphones Headphone OnlyOnly IF EXTERNAL FMM IS ENABLED BY SWITCH note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound on FM 107.9 Speaker Sound on FM 107.9 Press L/R Key to Adjust Speaker Sound on FM 87.7 Press L/R Key to Adjust IF INTERNAL FMT IS ENABLED BY SWITCH note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press MUTE SPEAKER CPM UP CPM UP CPM UP button NO SIGNAL CPM SOURCE note: Turn ON FMM+12V note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound Speaker Sound Enabled note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound 107.7 Speaker Sound on on FMFM 107.7 Press L/R Key to Adjust Speaker Sound 87.9 Speaker Sound on on FMFM 87.9 Press L/R Key to Adjust note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press note: UN-MUTE all audio CPM UP CPM UP change brightness setting, clear OSD after 5 seconds Day-time Brightness DAY MODE switch to 4:3 mode Clear OSD after 5 seconds DISPLAY MODE: STANDARD Change source to AUXILIARY 1 Clear OSD after 5 seconds Display and flash at 1 second intervals, the osd "NO SIGNAL" if no video signal is detected. AUXILIARY 1 change brightness setting, clear OSD after 5 seconds note: NIGHT MODE switch to 16:9 zoom mode Clear OSD after 5 seconds DISPLAY MODE: ZOOM Change source to INTERNAL GAME Clear OSD after 5 seconds note: MUTE all audio note: note: note: note: note: INTERNAL GAME 1. Screen is redeployed after stowing. 2. Source Change. 3. ACC Cycle Clear MUTE osd and UN-MUTE all audio when: Change source to DVD PLAYER Clear OSD after 5 seconds DVD PLAYER CPM UP CPM UP The CPM ENTER button performs the same function as the REMOTE ENTER button. CPM UP performs the sames function as the REMOTE SPEAKER button. In this mode: note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound 107.5 Speaker Sound on on FMFM 107.5 Press L/R Key to Adjust Speaker Sound 88.1 Speaker Sound on on FMFM 88.1 Press L/R Key to Adjust note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press note: note: DVD PLAYER Display OSD of the current surround mode. MPEG function. CPM EJECT note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound Speaker Sound on on FMFM 107.3107.3 Press L/R Key to Adjust Speaker Sound 88.3 Speaker Sound on on FMFM 88.3 Press L/R Key to Adjust note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press WIDE Eject DISC Powers the unit OFF or ON while ACC is True. Default power up state is ON on ACC cycle. CPM UP CPM UP Navigate and select options on the DVD root menu. DVD ROOT MENU Toggles between the available DVD zoom magnification settings. DVD In Play Mode Toggles through the available subtitles. Clear OSD and exit function after 5 seconds of inactivity. note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound Speaker Sound on on FMFM 107.1107.1 Press L/R Key to Adjust Speaker Sound 88.5 Speaker Sound on on FMFM 88.5 Press L/R Key to Adjust note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Set MPEG surround mode: WIDE and display OSD note: Surround: WIDE Surround: WIDE CPM UP CPM UP Clear OSD and exit function after 5 seconds of inactivity. Set MPEG surround mode: LIVE and display OSD note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound 106.9 Speaker Sound on on FMFM 106.9 Press L/R Key to Adjust Speaker Sound 88.7 Speaker Sound on on FMFM 88.7 Press L/R Key to Adjust note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press note: note: Surround: LIVE Surround: LIVE CPM UP, DOWN, LEFT, RIGHT, & ENTER buttons perform the same function as the REMOTE buttons. In menu mode: Navigate, select, and set parameters for the DVD Player. DVD PLAYER SETUP MENU Toggles through the available DVD info displays: Time Remain, Chapter Elapsed, Chapter Remain, etc. note: DVD PLAYER CONTROL FUNCTIONS Z8/Z10 Button Function and OSD Flow Diagram CPM UP CPM UP Clear OSD and exit function after 5 seconds of inactivity. Set MPEG surround mode: CONCERT and display OSD note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press Speaker Sound 106.7 Speaker Sound on on FMFM 106.7 Press L/R Key to Adjust Speaker Sound 88.9 Speaker Sound on on FMFM 88.9 Press L/R Key to Adjust note: Turn ON FMT+5V, if not already ON note: Clear OSD after 5 seconds of inactivity or ENTER press note: note: Surround: CONCERT Surround: CONCERT Control DVD playback, navigate chapters, fast forward and rewind. DVD In Play Mode DVD In Play Mode Direct chapter selection. CPM UP CPM UP note: note: SETUP SOURCE note: note: RES DISC MENU INFO ++ Headphones Headphone OnlyOnly Clear OSD and exit function after 5 seconds of inactivity. SUB TITLE DISPLAY Set MPEG surround mode: OFF and display OSD Surround: OFF Surround: OFF CPM LEFT, RIGHT and ENTER buttons perform the same function as REMOTE LEFT, RIGHT and ENTER. CPM UP performs the sames function as the REMOTE SPEAKER button. In FMT control mode: note: Turn OFF FMT+5V note: Clear OSD after 5 seconds of inactivity orENTER press note: Turn ON FMT+5V note: Clear OSD after 5 seconds of inactivity orENTER press note: Recall & set last station and display OSD Clear OSD and exit function after 5 seconds of inactivity. Set MPEG surround mode: CHURCH and display OSD Surround: CHURCH Surround: CHURCH CPM LEFT button performs Chapter Back. CPM RIGHT button performs Chapter Next. CPM DOWN button performs Fast Rewind. CPM UP button performs Fast Forward. CPM PP (PLAY/PAUSE) button toggles between Pause and Play . In playback mode: Evervictory Electronic Company Limited Page 46 All-In-One DVD Overhead System FCC ID:TZ8TR1073ZE1050D NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Source Modified : D:20071029000822 Create Date : 2007:10:29 08:12:50+08:00 Creator Tool : Acrobat PDFMaker 7.0 for Word Modify Date : 2007:11:28 15:54:41+08:00 Metadata Date : 2007:11:28 15:54:41+08:00 Document ID : uuid:15f05341-004b-4e3a-9c85-95617ba89800 Instance ID : uuid:09058598-43f4-4145-8e07-3184e74e7f1c Version ID : 53 Format : application/pdf Title : Creator : tan Subject : Headline : Has XFA : No Page Count : 19 Page Layout : OneColumn Author : tanEXIF Metadata provided by EXIF.tools