Ewig Macao Commercial Offshore 693230 Remote Thermometer User Manual 8

Download:
Mirror Download [FCC.gov]
Document ID	511146
Application ID	E37CUcQcj86IuOBdnoYqEA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	141.71kB (1771336 bits)
Date Submitted	2005-02-01 00:00:00
Date Available	2005-02-01 00:00:00
Creation Date	2005-01-25 21:46:08
Producing Software	pdfFactory v1.57 (Windows Me Chinese(Taiwan))
Document Lastmod	0000-00-00 00:00:00
Document Title	列印未命名 (8 頁)
Document Creator	pdfFactory http://www.pdffactory.com
Document Author:	cee3

INSTRUCTION MANUAL
MODEL ET-7 4 TURKEY FRYER REMOTE THERMOMETER
Introduction
Congratulations on your purchase of the model # ET—74 Turkey Fryer Remote Thermometer, a
programmable radio frequency turkey fryer oil thermometer. You will now be able to remotely
monitor the temperature of the oil in your outdoor turkey fryer from anywhere in your home or
up to 150 feet away in your backyard. The remote thermometer will alert you if the oil
temperature has fallen to low or gotten to high. It will also display the average oil temperature of
the oil during your cooking process
Components
1. l - receiver unit
2, 1 - transmitter unit
34 1 - detachable 16” long stainless steel probe sensor with clip
4. 4 - AAA batteries
Receiver Features
FRONT BACK
REMOTE RECEIVER
AVJEMP YIMER Q 0
8503 Bill}
Battery Compartment
LCD (Liquid Crystal Display] — Displays all icons, temperature and time.
CLIP — Removable clip allows you to be mobile. Clip the receiver unit to belt.
BATTERY COMPARTMENT — Holds 2 AAA batteries
STAND — Swings out and allows you to stand the receiver on tabletop.
Buttons
1. HR — Press to set hour. Press 85 hold for 2 seconds, the hours will increase 10 hours per
second.
2. MIN — Press to set minutes. Press 81. hold for 2 seconds, the minutes will increase 10 minutes
per second.
3. START / STOP — Press to start or stop the timer countdown or count up
44 HI — Press to display the maximum oil alert temperature. Press av. hold for 2 seconds, the
temperature value will flash
5. L0 — Press to display the minimum oil alert temperature. Press &, hold for 2 seconds, the
temperature value will flash.
6. ON/OFF — Tums receiver on and off.
Transmitter Features
FRONT BACK
we no «umsc
hunnnuunmw momma-um
REMOVE mANswnER
Made In cum
pawn Panalng
§
BATTERY COMPARTMENT — holds 2 AAA batteries.
1 PROBE — plug in for stainless steel probe sensor
Buttons
1. TX — transmit manually, terminates the auto registration process. Press and hold for 2
seconds to register the radio frequency with the receiver.
2. ON / OFF — on normal operation with full function. Off turns transmitter off.
Receiver LCD
m. Nlnepam smi. mm
mm". /
\ TEMP
W £35 ham;
{mam . ..
_—___ cow
Av. mm ms" 9 <— ”me
mafia I.” 7: 5:89“...
Installing batteries
Open the battery compartment of receiver and insert the two “AAA” batteries Open the battery
compartment of transmitter and insert the two “AAA" batteries.
The Turkey Fryer Remote Thermometer needs the receiver to register the radio frequency signal
from the transmitter.
Registering Receiver & Transmitter
1. Remove the battery compartment door of the transmitter
2. Plug the stainless steel probe sensor into the PROBE plug in of the transmitter.
3. Turn the Receiver on by sliding switch on the rear of the receiver from OFF to ON.
4. Turn Transmitter on by sliding switch on the the rear of the transmitter from OFF to ON.
This needs to be done within 60 seconds of turning on the receiver in order for the receiver to
register the signal from the transmitter. If it doesn't beep within 5~10 seconds slide switch OFF
wait a few seconds and then switch back ON. Pressing and holding the TX button for 2 seconds
will do the same thing as turning transmitter OFF and then back ON.
5. Registration is complete when the unit beeps and the probe temperature appears where the “
—-“ was flashing.
6. Replace the transmitter battery door.
7. Snap the probe sensor mounting bracket onto the back of the transmitter.
Setting HI (Maximum) Oil Alert Temperature
1. Press HI to display the maximum oil alert temperature. The value will only be displayed for a
few seconds. Note: The default value from the factory is 370° F.
2. While the value is displayed press 85 hold HI for 2 seconds, the temperature value will flash.
3. Press HI to increase the alert temperature or press L0 to decrease it. Note: The temperature
range is 140°F — 410°F
4. Once your desired HI alert temperature is reached don’t push any buttons until the flashing
value disappears.
Note: Press HI to read (confirm) your set maximum alert temperature
Setting L0 (Minimum) Oil Alert Temperature
1. Press L0 to display the minimum oil alert temperature. The value will only be displayed for a
few seconds. The default value from the factory is 330° F.
2. While the value is displayed press 85 hold LO for 2 seconds, the temperature value will flash.
3. Press HI to increase the alert temperature or press L0 to decrease it. Note: The temperature
range is 32°F — 392°F
4. Once your desired LO alert temperature is reached don’t push any buttons until the flashing
value disappears.
Note: Press L0 to read (confirm) your set minimum alert temperature.
Turn on the temperature alerts
Press HI & LO together to activate the HI 85 LO temperature alerts.. An alarm icon will appear
beneath TEMP in the upper left hand corner of LCD.
Note: The receiver will beep and the alarm icon and probe temperature display will flash if:
the actual oil temperature has exceeded your maximum oil temperature setting
the actual oil temperature has fallen below your minimum oil temperature setting
Note: The minimum oil temperature alert is not activated until the actual oil temperature goes
above the minimum temperature setting.
Example: If you set the minimum oil temperature for 330 “F and press the HI 81. LO together to
turn on the warning alert and your actual oil temperature is below 330 °F the unit will NOT beep
or flash. It assumes your oil is not up to temperature. Once the actual oil temperature goes over
330 °F the minimum oil alert is activated. If it falls below 330 GF after that it will beep Sn flash.
Using the Timer
Count down
1. Press HR or MIN to put hours or minutes on the timer. Press START/ STOP button to start
countdown. The “1” will blink for every second.
2. To stop the countdovsm process , press START/ STOP button. The “0” becomes solid.
3. Press HR 85 MIN together to clear the setting back to 0:00.
Note: The minimum setting for the timer is I minute. The maximum setting is 9 hours 59
minutes. When the countdown reaches “0:00” the timer starts counting up and it will beep for
30 seconds. The “0:00” and “i" will blink. Press the START/ STOP button to stop beeping.
Count up
1. Press START/ STOP button to start count up. The "t” will blink for every second.
2. To stop the count up process, press START/ STOP button. The “0” becomes solid.
3. Press HR 85 LO together to clear the setting back to 0:00.
When the count up reaches 10 hours the display will turn to 0:00, the unit beeps and “i” will
blink for 30 seconds.
Change “C to °F or °F to “C
Press and hold HI 85 LO together for 2 seconds.
Procedure for typical use with an outdoor turkey fryer:
The following typical example will go through the steps to use your Turkey Fryer Remote
Thermometer to cook a 12 lb turkey for 45 minutes at 350 °F. Also to have it alert you when
your initial oil temperature is up to temperature (370 “Fj and if the oil temperature falls below
340 °F or goes above 360 °F during the cooking process.
Set up your turkey fryer.
Follow the registration procedure for the turkey fryer remote thermometer.
Clip the transmitter probe to the turkey fryer pot so that the probe tip is immersed in oil but not
touching the inside of the pot and so the bottom of the transmitter is at least 1” above the rim of
the pot.
DO NOT immerse the transmitter in oill
Press HI to display the maximum oil alert temperature.
While the value is displayed press 85 hold Hl for 2 seconds, the temperature value will flash.
Press HI to increase the alert temperature or press L0 to decrease it so 370 °F is displayed.
Once 370 °F is reached don’t push any buttons until the flashing 370 °F disappears.
Quickly press Hl to read (confirm) 370 °F HIGH alert temperature.
Press L0 to display the minimum oil alert temperature.
While the value is displayed press 8; hold LO for 2 seconds, the temperature value will flash.
Press HI to increase the alert temperature or press L0 to decrease it so 340 °F is displayed.
Once 340 °F is reached don’t push any buttons until the flashing 340 °F disappears.
Quickly press L0 to read (confirm) 340 °F LOW alert temperature.
Press HI & LO together to turn on the alert temperatures.
Heat up the oil and monitor the oil temperature with the receiver. The receiver will beep and
flash when the oil temperature has reached 370 °F.
Press HI 85 Lo together to turn off the alert temperatures
Press HI to display the maximum oil alert temperature set at 370 “F.
While the value is displayed press & hold HI for 2 seconds, the 370 °Fwi11 flash.
Press L0 to decrease it so 360 °F is displayed.
Once 360 °F is reached don‘t push any buttons until the flashing 360 °F disappears.
Quickly press HI to read (confirm) 360 °F HIGH alert temperature.
Press MIN repeatedly to put 45 minutes on the timer.
It is now time to start the cooking process. Carefully lower your 12 lb prepared turkey into the
turkey fryer. The oil temperature should drop immediately.
Press START/ STOP to start the 45 minute countdown timer.
Press HI 85 LO together to tum on the alert temperatures.
The turkey fryer remote thermometer should be displaying the actual oil temperature in upper
right hand corner, the average oil temperature in lower left hand corner and the countdown
timer in the lower right hand corner of LCD.
It is now monitoring the actual oil temperature and will alert you if the oil drops below 340 °F or
goes above 360 °F. It will also monitor the average oil temperature during the 45 minute cooking
process.
When timer counts down the 45 minutes the receiver will beep and flash for 30 seconds unless
you press START/ STOP to turn it off. It with then continue to count up and continue to
compute the average oil temperature.
If the actual oil temperature falls below 340 °F or goes above 360 °F the unit will flash and beep
until the oil temperature is brought back into range between 340 °F - 360 °F or until HI &, LO
are pressed together to shut off the alert temperatures.
Once turkey is cooked you can remove from turkey fryer. Shut down heat to oil and allow to cool
down before attempting to remove the transmitter and probe from the pot.
Helpful Hints
If the receiver displays LLL or HHH instead of the probe temperature, wait for probe to reach
room temperature. If LLL or HHH is still displayed it is likely the internal probe has shorted out
either through moisture or heat damage.
If you lose the signal from the transmitter the receiver will display “---“ instead of the oil
temperature You may be too far from the transmitter. There may be too many Radio Frequency
obstacles. There may be electrical interference.
Do not immerse the probe in water while cleaning.
Do not allow the transmitter or probe to come into contact with flames.
If the temperature displayed seems to read too high or the temperature seems to increase too
quickly check to make sure the probe tip is not touching the turkey or side of the pot. Reposition
the probe tip.
Cautions:
Always wear a heat resistant glove to touch the stainless steel probe sensor or wire after
cooking. Do not touch with bare hands.
Keep the stainless steel probe sensor away from children.
Clean the stainless steel probe and dry thoroughly after each and every use.
Do not use the receiver in the rain. The transmitter is water proof but not water tight. Do not
immerse in Water,
Do not expose the plug of the stainless steel probe or the plug in hole of the transmitter to water
or any liquid. This will result in a bad connection and faulty readings.
Do not expose the receiver or transmitter to direct heat or surface.
Cleaning
Always wear a heat resistant glove to touch the stainless steel probe or wire after cooking. Do
not touch with bare hands.
Keep the stainless steel probe sensor away from children.
Unplug the probe from transmitter and detach the probe mounting bracket from the back of the
transmitter.
Wash the metal probe with hot soapy water and dry thoroughly. Do not immerse the probe wire
in water while cleaning.
Wipe the transmitter and receiver with damp cloth. Do not immerse either in water.
LIMITED NINETY DAY WARRANTY
Maverick Industries Inc. warrants the Turkey Fryer Remote Thermometer to be free of defects in
parts, materials and workmanship for a period of 90 days, from date of purchase. Should any
repairs or servicing under this warranty be required, contact Maverick Customer Service by mail
or phone for instructions on how to pack and ship the Turkey Fryer Remote Thermoemeter to
Maverick’s National Service Center located as follows:
Maverick Customer Service
94 Mayfleld Ave.
Edison NJ 08837
Telephone: (732) 417—9666
Hours: Weekdays 8:30 AM- 4:30 PM
Do not send any parts or product to Maverick without calling and obtaining a Return
Authorization Number and instructions
This warranty is VOID if instructions for use are not followed; for accidental damage; for
commercial use; for damage incurred while in transit; or if the Turkey Fryer Remote
Thermometer has been tampered with
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state
www.maverickhousewares.com
Modification not authorized by the manufacture may void users authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energ' and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications However, there is no
guarantee that interference will not occur in a particular installation, If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and receiver.
I Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
I Consult the dealer or an experienced radio/TV technician for help

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : 列印未命名 (8 頁)
Author                          : cee3
Creator                         : pdfFactory http://www.pdffactory.com
Producer                        : pdfFactory v1.57 (Windows Me Chinese(Taiwan))
Create Date                     : 2005:01:25 21:46:08
Page Count                      : 8

EXIF Metadata provided by EXIF.tools