Extreme Networks AP3915E Wireless 802.11 a/ac+b/g/n Indoor Access Point User Manual AP7632 rev 2
Extreme Networks, Inc. Wireless 802.11 a/ac+b/g/n Indoor Access Point Users Manual AP7632 rev 2
Contents
- 1. Users Manual (AP3915e)_rev 2.pdf
- 2. Users Manual (AP7632)_rev 2.pdf
Users Manual (AP7632)_rev 2.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3565982 |
| Application ID | eXjJ2g3MvwvaxhmQOP3Dlw== |
| Document Description | Users Manual (AP7632)_rev 2.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 62.33kB (779182 bits) |
| Date Submitted | 2017-09-18 00:00:00 |
| Date Available | 2017-09-18 00:00:00 |
| Creation Date | 2017-01-11 16:08:32 |
| Producing Software | Acrobat Distiller 17.0 (Windows) |
| Document Lastmod | 2017-09-15 19:53:48 |
| Document Title | AP-7632-680B40-US AP-7632-680B40-WR WiNG Access Points Quick Reference |
| Document Creator | FrameMaker 2017 |
| Document Author: | Extreme Networks |
Installing the ExtremeWiNG 802.11 a/ac+b/g/n Indoor AP7632 Access Point Overview of the AP7632 The AP7632 is an 802.11ac Wave 2 Access Point featuring dual 2x2:2 radios. The all-metal design of the AP supports high operating temperatures, external antennas, and flexible mounting options for wall mount, ceiling mount, beam or T-bar. The AP can be powered by 802.3af or by using a 12VDC wall brick. Description Power Source External 12V DC power supply (optional) The AP7632 can also be powered by an external DC power supply plugged into an AC source. Plug the supply’s input jack into the DC-In port (callout 5 in Figure 1). Figure 2 shows the LEDs on the front of the AP7632. Figure 2 LEDs on AP Front Face Note: The AP7632 requires a minimum base firmware of WiNG 5.9.1. The AP7632 model has the following features: • Radios: 2 radios (2.4GHz and 5GHz); 1 IoT Radio (2.4 GHz) • Console Port: RJ45 • One RJ45, 10/100/1000 Ethernet Port (LAN1) with PoE • LEDs: 4 (see Figure 2) • One Reset button • Power: PoE 802.3af; 12VDC power in connector (see Table 1) • Antennas: – Five external antennas (four band-locked antennas and one BLE antenna) – Three RSPMA mount style antenna connectors • External USB 2.0 port with features to support a locking module • Safety Hangar provision • Temperature: – -20 to +55*C ambient temperature anywhere – -20 to +70*C ambient temperature near sea level • Enclosure: Plastic with metal base In Figure 1, the top image indicates the top view of AP7632 and the bottom one indicates the side view of AP7632. Figure 1 Top and Side View of AP7632 Option 2: Mounting the AP directly to the wall using 2 screws 1 Remove the main bracket attached to the back of the AP. 2 Drill two holes 104mm (4.100”) apart from each other on the wall. 3 Insert the screws into the holes and use the screw-in anchors if needed. simultaneously rotating the adaptor onto the Main Bracket until the locking pin clicks in place. 2 Slide the T-bar holder onto the T-bar and replace the tiles to hold the adaptor onto the T-bar. Note: Leave 1/8” gap between the screw head and the wall. 4 Insert the Ethernet cable’s RJ45 connector into the GE1 port (Figure 1; side view). Attach the optional DC adaptor if there is no PoE on the Ethernet cable. 5 Insert the keyholes of the AP onto the screws and slide it down till it is firmly held by the screw heads. If the AP is loose, unmount the AP and decrease the distance between the screw head and the wall. Remount the AP. Figure 3 Attaching AP to a Wall using 2 screws 3 Hold the AP and rock it back and forth to ensure that it is securely mounted. 4 Attach the Ethernet cable’s RJ45 connector to the LAN1/GE1 port. The optional WS-MBI-DCMTR01 (purchasing part #30518) adaptor can also be used for T-bar installations without the mounting bracket. For detailed instructions, refer ExtremeWireless AP7632 Installation Guide. 1 IoT Radio Connecting a Power Supply to the AP7632 4 Status 2 Radio 1, 2.4GHz 3 Radio 2, 5GHz Green LEDs indicate 2G Wi-Fi Radio, Amber LEDs indicate 5.2G Wi-Fi Radio, and Blue LED indicates the IoT Radio. The Status LED is ON only during diagnostics. For detailed installation information about the AP7632, see the Extreme Networks WiNG AP7632 Installation Guide. Option 3: Using an optional Flat Metal Indoor Bracket Note: Mounting the AP to a flat ceiling/wall requires the optional Flat Metal Indoor Bracket (Purchasing Part #37210), which must be purchased separately. Verifying the AP7632 Box Contents Verify the contents of the box and ensure that the following items are available: Table 2 Contents of the AP7632 Box Quantity Item AP7632 Quick Reference Guide Mounting Bracket for 802.11ac Indoor AP assembled onto the AP Cloud Quick Start Card Attach the Flat Metal Indoor bracket to the main bracket. Keep the adaptor to the center of the bracket, push and rotate it (Figure 4). Hold the AP to the surface to which it needs to be attached and use the optional adapter’s end holes as a template to mark the attachment holes. Drill two holes on the solid surface (wall or ceiling) where you want to mount the AP. Connect the LAN/Ethernet cable to the back of the AP. Hold the AP, insert and tighten the 2 screws until you lock it into place. Figure 4 Attaching the optional Flat Metal Indoor Bracket to the main bracket Phillips Pan-head wood screws Screw-in anchors LAN/Console Connections The AP7632 has one GE1 (Ethernet) port and a Console port. Refer to Figure 1 for the location of these ports. During administration and maintenance through the GE1 or Console, the AP must still have a power connection through either an Ethernet PoE cable or a DC power supply. Professional Installation Instruction Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. Installation location The following hardware is included: If you need to power the AP7632 with an external 12V DC power supply, you can plug the power cord into the power connector (callout 5 in Figure 1) on the back of the AP. There is no wall mount for the 12V DC power supply. When the device is powered on, the power LED on the front face of the AP is lit. Refer to the Extreme Networks WiNG AP7632 Installation Guide for information about optional power supplies. The product shall be installed at a location where the radiating antenna can be kept 36 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. External antenna Mounting and Connecting the AP Electrical Hazard: Only qualified personnel should perform installation procedures. 1 2.4G/5G Radio 1 and 2 2 GE1/PoE 3 Console RJ45 connector 4 Reset button 5 Optional 12V DC power supply connector 6 BLE Radio 7 Kensington Lock Slot 8 2.4G/5G Radio 1 and 2 Use these instructions as guidelines for mounting and connecting the AP7632 easily and safely. The AP7632 comes with a Mounting Bracket (ordering part #37201) that can be used to mount the AP on a flat surface. You can also purchase an optional flat metal indoor bracket (ordering part #37210) for easy installation. You also have an option to purchase the optional adapter if you want to mount the AP on a drop ceiling or mount it to a beam. For more information about installing the optional bracket and the adaptor, see the Extreme Networks WiNG AP7632 Installation Guide. For installation videos of the AP, see www.extremenetworks.com/support/ Mounting the AP on a Dry or Wood Wall/Solid Flat Ceiling To install the AP on a dry wall or flat surface: Option 1: Using the Main Bracket Note: Remove the main bracket from the AP to use it as a template. 1 USB Port Table 1 shows ways to power the AP7632. Table 1 Powering the AP7632 Power Source Power over Ethernet (PoE) Description Power is provided through the RJ45 Ethernet port (GE1 port) to the right of the 12V DC port. This is the preferred method of powering the AP on ceiling and high wall installations. Use the main bracket as a template and mark the hole centers on the wall. Note: The four feet of the bracket must be horizontal and pointing to the right. The flat part of the large surface must be touching the wall. 2 Drill two holes 81mm (3.200”) apart from each other on the wall where you want to mount the AP. 3 Insert the screws through the bracket and into the holes. Use the screw-in anchors if needed. 4 Insert the Ethernet cable’s RJ45 connector into the LAN1/GE1 port. 5 Slide the AP onto the bracket’s four feet. Ensure that the AP is secured in place and tightened. Option 4: Using an optional Wall and Box bracket Note: Mounting the AP to a flat ceiling/wall requires either the Main Bracket (Option 1), Flat Metal Indoor Bracket (Option 3), or the optional Wall and Box Bracket (Option 4 - purchasing part #30516), which must be purchased separately. Note: The slot and lock cuts in the rear of the AP (visible when the main plate is removed) are used for mounting the Wall and Box bracket. The unlock tab on the bracket should be pointed up. In this position, the AP7632 can be mounted with the antennas facing upward or downward. Remove the main bracket from the AP. Follow the procedure mentioned in ExtremeWireless AP7632 Installation Guide to mount the AP on a Wall and Box bracket. Mounting the AP to a Bracket on a Junction or Gang Box To mount the AP to a Bracket on a Junction or Gang box, use the Wall and Box Bracket (needs to be purchased separately). 1 Remove the main bracket from the AP. 2 Follow the procedure mentioned in ExtremeWireless AP7632 Installation Guide to mount the AP on a Wall and Box bracket. Use only the antennas which have been approved by the applicant. The nonapproved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. Installation procedure Please refer to user’s manual for the detail. Warning: Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 36 cm entre l'antenne emettrice et les personnes. Antenn externe Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit. Mounting the AP to a Suspended or Drop Ceiling Note: Mounting the AP to a suspended or drop ceiling requires the optional adapter (Universal Mounting Kit for EWLAN APs; purchasing part # KT-135628-01), which must be purchased separately. Attach the T-bar adaptor by pushing down the main bracket’s angled locking tabs, pulling up on the T-bar adaptor’s locking pin, and Procedure d'installation Consulter le manuel d'utilisation. Warning: Avertissement: Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. Operational Description of Antenna Configuration and RF Output Power Setting Per KDB 353028 D01 Antennas Part 15 Transmitters v01 requirement, Applications must contain an exhibit listing each antenna, the antenna gain, antenna type, and antenna manufacturer/vendor and output power that can be used for the device, that the info listed below are correct and represent the product in consideration under this filing. Avertissement: 1 les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; 2 le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l’exploitation non point à point, selon le cas; 3 De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ ou des dommages aux dispositifs LAN-EL. Warning: IC Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 36cm between the radiator & your body. Approved Antenna(s) list: ExtremeWiNG Access Points TM Quick Reference P/N 37113 AP-7632-680B40-US P/N 37114 AP-7632-680B40-WR Warning: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 36 cm de distance entre la source de rayonnement et votre corps. Declaration of Conformity in Languages of the European Community English Hereby, Extreme Networks, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Valmistaja Extreme Networks vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart Extreme Networks dat het toestel Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Regulatory and Compliance Information Safety Guidelines This section contains notices that are intended to protect your personal safety and prevent damage to the equipment. Qualified Personnel: Electrical Hazard: Only qualified personnel should perform installation procedures. Within the context of the safety notes in this documentation, qualified persons are defined as persons who are authorized to commission, ground and label devices, systems, and circuits in accordance with established safety practices and standards. A qualified person understands the requirements and risks involved with installing outdoor electrical equipment in accordance with national codes. Bij deze verklaart Extreme Networks dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. French Par la présente, Extreme Networks déclare que ce Radio LAN device est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables. Federal Communications Commission (FCC) Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Warning: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 31cm between the radiator & your body. European Waste Electrical and Electronic Equipment (WEEE) Notice In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE): The symbol above indicates that separate collection of electrical and electronic equipment is required. 2 When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately. 3 It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment. 4 It is the users’ responsibility to utilize the available collection system to ensure WEEE is properly treated. For information about the available collection system, please contact Extreme Customer Support at +353 61 705500 (Ireland). Swedish Härmed intygar Extreme Networks att denna Radio LAN device står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Danish Undertegnede Extreme Networks erklærer herved, at følgende udstyr Radio LAN device overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. German Hiermit erklärt Extreme Networks die Übereinstimmung des "WLAN Wireless Controller bzw. Access Points" mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. Greek ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Extreme Networks ∆ΗΛΩΝΕΙ ΟΤΙ Radio LAN device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ ΕΚ. Icelandic Extreme Networks lysir her med yfir að thessi bunadur, Radio LAN device, uppfyllir allar grunnkrofur, sem gerdar eru i R&TTE tilskipun ESB nr 1999/5/EC. Italian Con la presente Extreme Networks dichiara che questo Radio LAN device è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Spanish Por medio de la presente Extreme Networks declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Hazardous Substances This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Industry Canada Notice This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : 1 The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2 The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-topoint and non-point-to-point operation as appropriate; and 3 Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Par la présente Extreme Networks déclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Detachable Antenna Usage This radio transmitter (IC: 4141B-AP3915E / Model: AP7632) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC: 4141B-AP3915E / Model: AP7632) a été approuvé par ISED pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Portuguese Extreme Networks declara que este Radio LAN device está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/ CE. Malti Hawnhekk, Extreme Networks, jiddikjara li dan Radio LAN device jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Notice Copyright © 2017 Extreme Networks, Inc. All Rights Reserved. Legal Notices Extreme Networks, Inc., on behalf of or through its wholly-owned subsidiary, Enterasys Networks, Inc., reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, please see: www.extremenetworks.com/company/legal/trademarks/ Documentation & Support For product support, including documentation, visit: www.extremenetworks.com/support/ P/N 9035136-02
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.150055, 2012/11/19-18:45:32 Format : application/pdf Creator : Extreme Networks Title : AP-7632-680B40-US AP-7632-680B40-WR WiNG Access Points Quick Reference Create Date : 2017:01:11 16:08:32Z Creator Tool : FrameMaker 2017 Modify Date : 2017:09:15 19:53:48-04:00 Metadata Date : 2017:09:15 19:53:48-04:00 Producer : Acrobat Distiller 17.0 (Windows) Document ID : uuid:0385524d-8b43-4281-ba65-d6d3cf468510 Instance ID : uuid:6dcc283f-e90e-40d4-a346-71378690e4ad Page Mode : UseNone Page Count : 2 Author : Extreme NetworksEXIF Metadata provided by EXIF.tools