Extreme Networks BLE2 Digital Broadcasting Device (iBeacon/Eddystone) User Manual

Extreme Networks, Inc. Digital Broadcasting Device (iBeacon/Eddystone)

User Manual

Extreme Networks www.extremenetworks.comPage 1`Model number: BLE-2Model Description36501 LBS-BLE-2AU Bluetooth beacon - 2-alkaline batteries - not provisioned36502 LBS-BLE-2APBluetooth beacon - 2-alkaline batteries - fully provisioned36503 LBS-BLE-2LUBluetooth beacon - 2-lithium batteries - not provisioned36504 LBS-BLE-2LP Bluetooth beacon - 2-lithium batteries - fully provisioned36511 LBS-BLE-2AU-8Bluetooth beacon - 2-alkaline batteries - not provisioned (8-Pack)36512 LBS-BLE-2AP-8 Bluetooth beacon - 2-alkaline batteries - fully provisioned (8-Pack)36513 LBS-BLE-2LU-8 Bluetooth beacon - 2-lithium batteries - not provisioned (8-Pack)36514 LBS-BLE-2LP-8 Bluetooth beacon - 2-lithium batteries - fully provisioned (8-Pack)(iBeacon/Eddystone) Digital Broadcasting Device
Extreme Networkswww.extremenetworks.comPage 2`The robust MiniBeacon BLE-2 is an enterprise-level iBeacon with ARM core chipset nRF51822 and leverageBLE4.0 technology; it has a strong & waterproof case, accurate hardware and robust firmware. It is designed forthe commercial advertising and indoor location-based service.Minew Beacons broadcast 2.4GHz radio signals at regular and adjustable intervals. MiniBeacon can beheard and interpreted by iOS and Android BLE-enabled devices that are equipped with many mobile apps.FEATURES- Programmed MiniBeacon standard firmware- Powered by 2pcs AA batteries, alkaline- Omni-directional PCB antenna- The max. 200 meters advertising distance- Waterproof IP65- Ultra-low power consumption chipset nRF51822 with ARM coreCERTIFICATIONS- iBeacon MFi License (iBC-14-00582)- FCC Regulation (FCC Part 15.)- CE Regulations (Included EN300328/301489/60950/62479)SPECIFICATIONi3 Robust MiniBeaconImage 1Compatibility- Supported iOS 7.0+ and Android 4.3+ system;- Compatible with Apple iBeaconTM standard;- Compatible with all Bluetooth 4.0 (BLE) devices;Long Battery Lifetime and Battery Level- 5 years, with the default settings;- LED will be flashing when battery low;- Easy to get the real-time battery level notification;Soft-reboot- Reboot the device via command without any tools;OTA and J-Link- Supported upgrade via Over-The-Air;- Reserved J-Link port on the board forprogramming;Connection Mode- Advertising mode, non-connectable;- Configuration mode, connectable;Configurable Parameters- UUID, Major, Minor, Device Name, Password etc.- Special Configuration APP;Transmission Power Levels- 8 adjustable levels, range from 0 to 7- Transmission power range: -30dBm to +4dBm;Long Range- The max. Range 200 meters in the open space;- The range depends on the physical environment;Security- 8 characters password (Lock/Unlockparameters);- Broadcast the encrypted data if needed;- AES HW encryptionMounting- 3M branded adhesive for direct mounting to wall;- Bracket for mounting on non-metal wall bytwo-screw holds;
Extreme Networkswww.extremenetworks.comPage 3`BATTERY ASSEMBLY- Please prepare at least 2pcs AA size alkaline batteries;- Please do check the polarity of batteries and battery-socket before assembly, see image 2;- Please assembly the batteries as the below image 3;- MiniBeacon will be turned on automatically if batteries were assembly correctly;Image 2 Image 3LOW BATTERY INDICATION- If the battery level lower to 2.3V, the Red LEDwill flash a time every 5 seconds; MiniBeacon willstop broadcasting automatically once the batterylevel lower to 2.1 volts. (Image 4)Image 4TECHNICAL SUPPORT- We don’t provide any batteries for i3 samples,because the heavy of batteries will substantiallyincrease the shipment.* Minew sales team will send you these documents after the sample arrived.
Page 4CONFIGURABLE PARAMETERSDatasheet V2.04CharacteristicItemDefault Settings0xFFF1UUIDE2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (Proximity)0xFFF2Major00xFFF3Minor00xFFF4Measured Power-59 (0xC5)0xFFF5Transmission Power6 (0dBm)0xFFF6Change Passwordminew123 (Must be 8 characters)0xFFF7Broadcasting Interval5(500mS)0xFFF8Serial IDRandom (Unique serial ID for beacon)0xFFF9iBeacon NameMiniBeacon_ (the maximum 14 characters)0xFFFEConnection Mode0 (connectable, configuration mode)0xFFFFSoft Rebootminew123 (it is same as the value of Change Password)ELECTRONIC PARAMETERSItemValueRemarksCase ColorBlack, whiteOther colors can be customizedBattery Model2 x AA (LR6)2pcs Alkaline battery, 2500mAh, 3.0VOperation Voltage1.8-3.6VDCTransmission Circuit10.5mA (Max.)Tested at 0dBm transmission powerTransmission Range200 metersMaximumAntenna50ohmOn board / PCB AntennaAccessoriesDouble adhesive1pc, high-strength, 3M brand;Screws2pcs screws and 2pcs plastic holdersNet Weight50.0gWithout battery and package boxSize72 x 45 x 22MMNullPACKING INFORMATIONGift package:Image 6
Page 5Standard package:Image 7Datasheet V2.04DetailsMin. PackageCartonGiftStandardGiftStandardQuantity2pcs / pack8pcs /box80pcs/cartonNet Weight100.0g/ pack400.0g/ box4.2Kg/cartonGross Weight220.0g/ pack420.0g/ box9.5Kg6.0KgSize21.5 x 7.7x 3.5 CM32 x 11 x 8 CM32 x 23 x 40 CMAPPDENDIX1. J-LINK Programmer Kit;2. Over-the-Air Function;Please contact Minew sales team to ask more related information if needed.DECLARATIONThe contents of this datasheet are subject to change without prior notice for further improvement. Minewteam reserves the right to explain all the terms of this datasheet.<END>
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna.

Navigation menu