Extreme Networks BLEUSB Digital Broadcasting Device (iBeacon/Eddystone) User Manual
Extreme Networks, Inc. Digital Broadcasting Device (iBeacon/Eddystone)
User Manual
Extreme Networks www.extremenetworks.com Beacon / iBeacon / MiniBeacon Model Number: BLE-USB Model 36509 LBS-BLE-USBU Description Bluetooth beacon - USB - not provisioned 36510 LBS-BLE-USBP Bluetooth beacon - USB -fully provisioned 36519 LBS-BLE-USBU-100 Bluetooth beacon - USB - not provisioned (100-Pack) 36520 LBS-BLEUSBP-100 Bluetooth beacon - USB -fully provisioned (100-Pack) Page 1 Extreme Networks www.extremenetworks.com The Mini USB iBeacon is a mini USB iBeacon with ARM core chipset nRF51822 and leverage BLE 4.0 technology; it is powered by USB slot, accurate hardware and robust firmware. It is designed for the commercial advertising and indoor location-based service. Minew Beacons broadcast 2.4GHz radio signals at regular and adjustable intervals. MiniBeacon can be heard and interpreted by iOS and Android BLE-enabled devices that are equipped with many mobile apps. FEATURES - Programmed MiniBeacon standard firmware - Mini USB iBeacon; - The max. 60 meters advertising distance - Ultra-low power consumption chipset nRF51822 with ARM core - Plug and play; Mini USB iBeacon CERTIFICATIONS Image 1 - iBeacon MFi License (iBC-14-00582) - FCC Regulation (FCC Part 15.) - CE Regulations (Included EN300328/301489/60950/62479) SPECIFICATION Compatibility - Supported iOS 7.0+ and Android 4.3+ system; - Compatible with Apple iBeaconTM standard; - Compatible with all Bluetooth 4.0 (BLE) devices; No Battery Needed - No battery needed, powered by USB slot; Soft-reboot - Reboot the device via command without anytools; OTA and J-Link - Supported upgrade via Over-The-Air; - Reserved J-Link port on the board forprogramming; Connection Mode - Advertising mode, non-connectable; - Configuration mode, connectable; Configurable Parameters - UUID, Major, Minor, Device Name, Password etc. - Special Configuration APP; Transmission Power Levels - 8 adjustable levels, range from 0 to 7 - Transmission power range: -30dBm to +4dBm; Long Range - The max. Range 40 meters in the open space; - The range depends on the physical environment; Security - 8 characters password (Lock/Unlockparameters); - Broadcast the encrypted data if needed; - AES HW encryption Easy to Deployment - Plug and play; Page 2 Extreme Networks www.extremenetworks.com CONFIGURABLE PARAMETERS 0xFFF8 Serial ID Default Settings E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (Proximity) -59 (0xC5) 7 (4dBm) minew123 (Must be 8 characters) 1(100mS) Random (Unique serial ID for beacon) 0xFFF9 0xFFFE 0xFFFF iBeacon Name Connection Mode Soft Reboot MiniBeacon_ (the maximum 14 characters) 0 (connectable, configuration mode) minew123 (it is same as the value of Change Password) Characteristic 0xFFF1 0xFFF2 0xFFF3 0xFFF4 0xFFF5 0xFFF6 0xFFF7 Item UUID Major Minor Measured Power Transmission Power Change Password Broadcasting Interval ELECTRONIC PARAMETERS Item Case Color Battery Model Operation Voltage Transmission Circuit Transmission Range Antenna Net Weight Size Value White, Black Null 4.5-5.5V 10.5mA (Max.) 60 meters 50ohm 2.0g 18 x 14 x 6 mm Remarks Other colors can be customized Powered by USB slot DC Tested at 0dBm transmission power Maximum On board / PCB Antenna With battery but without package Null * Minew sales team will send you these documents after the sample arrived. Page 3 PACKING INFORMATION Details Quantity Net Weight Gross Weight Size Box 80pcs per box 0.16Kg 0.40Kg 30.5 x 11 x 7.5 cm Carton 800pcs per carton 1.6Kg 4.5Kg 32 x 23 x 40 cm APPDENDIX 1. J-LINK Programmer Kit; 2. Over-the-Air Function; Please contact Minew sales team to ask more related information if needed. DECLARATION The contents of this datasheet are subject to change without prior notice for further improvement. Minew team reserves the right to explain all the terms of this datasheet.Page 4 FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Caution: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux apparei ls radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'appareil a été évalué pour répondre aux exigences générales d'exposition RF. L'appareil peut être utilisé dans des conditions d'exposition portables sans restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Creator : Administrator Description : Title : Comments : Company : Source Modified : D:20180919093503+01'35' Create Date : 2018:09:19 09:35:03+01:30 Creator Tool : WPS 文字 Modify Date : 2018:11:13 14:47:23+08:00 Metadata Date : 2018:11:13 14:47:23+08:00 Keywords : Producer : Document ID : uuid:21e3b1cf-3437-41e8-aadc-1d872d46f7c7 Instance ID : uuid:a77cfa3c-fd86-4190-bf18-70f3cb6909e9 Page Count : 6 Author : Administrator Subject : Trapped : falseEXIF Metadata provided by EXIF.tools