Ezurio BT900US Intelligent BT4.0 Dual Mode USB Dongle User Manual BT900 US 1 0 Manual rev2

Laird Technologies Intelligent BT4.0 Dual Mode USB Dongle BT900 US 1 0 Manual rev2

UserManual.wiki >

BT900US User Manual

Users Manual

Intelligent BTv4.0 Dual-Mode USB Dongle Part # BT900-US HARDWARE INTEGRATION GUIDE VERSION 1.0 Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852-2923-0610 Embedded Wireless Solutions Support Center:Embedded Wireless Solutions Support Center:Embedded Wireless Solutions Support Center:Embedded Wireless Solutions Support Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 www.lairdtech.com/bluetooth

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 REVISION HISTORY VersionVersionVersionVersion Revision DateRevision DateRevision DateRevision Date Change HistoryChange HistoryChange HistoryChange History 1.0 Initial Version

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 CONTENTS Revision History ..................................................................................................................... 3 Contents ................................................................................................................................ 4 1 Overview and Key Features ................................................................................................ 5 1.1 Features & Benefits .......................................................................................................................................................... 5 1.2 Application Areas.............................................................................................................................................................. 5 2 Specification ..................................................................................................................... 6 2.1 Specification Summary ................................................................................................................................................... 6 3 FCC and IC Regulatory Statements ..................................................................................... 8 3.1 Power Exposure Information ........................................................................................................................................ 8 3.2 Federal Communication Commission Interference Statement ......................................................................... 8 3.3 Industry Canada statement ........................................................................................................................................... 9 4 EU Declarations of Conformity ........................................................................................... 9 4.1 BT900-US ............................................................................................................................................................................. 9 5 Ordering Information ...................................................................................................... 11 5.1 General Comments ......................................................................................................................................................... 11 6 Bluetooth SIG Qualification .............................................................................................. 11 Additional Assistance ................................................................................................................................................................. 12

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 CategoriesCategoriesCategoriesCategories FeatureFeatureFeatureFeature ImplementationImplementationImplementationImplementation Control ProtocolsControl ProtocolsControl ProtocolsControl Protocols Any that can be implemented using smartBASIC vSP – Virtual Serial Port for BLE – Command Mode Only FW upgradeFW upgradeFW upgradeFW upgrade smartBASIC runtime engine FW upgrade Via UART Coexistence Coexistence Coexistence Coexistence 802.11 (Wi-Fi) 3 wire CSR schemes supported (Unity-3 for classic BT, Unity-3e for BLE) Operating ModesOperating ModesOperating ModesOperating Modes Self-contained Run Mode Selected by nAutoRUN pin status: LOW (0V). Then runs $autorun$ (smartBASIC application) if it exists. Interactive Development Mode HIGH (VCC). Then runs via at+run (and “file name” of smartBASIC application script). Supply VoltageSupply VoltageSupply VoltageSupply Voltage Supply Nominal 5VDC Power Power Power Power ConsumptionConsumptionConsumptionConsumption Current Max Peak Current (TX Power @ +8 dBm TX): 85 mA Standby Doze (waitevent) – 2.7mA (at 4MHz clock) (Note 5) Deep Sleep – 233 uA (external signal wakeup) See Note 5 User Configurable Clocking User configurable clocking (40MHz, 20MHz, 4MHz), so user can reduce current consumption further. PhysicalPhysicalPhysicalPhysical Dimensions 50.7mm x 18.5mm x 10.4mm EnvironmentalEnvironmentalEnvironmentalEnvironmental Operating -40°C to +85°C Storage -40°C to +85°C MiscellaneousMiscellaneousMiscellaneousMiscellaneous Lead Free Lead-free and RoHS compliant Warranty One Year Development ToolsDevelopment ToolsDevelopment ToolsDevelopment Tools Development Kit Development board and free software tools Software ToolsSoftware ToolsSoftware ToolsSoftware Tools Utilities Windows, Android and iOS applications UART Firmware Upgrade ApprovalsApprovalsApprovalsApprovals Bluetooth® Complete Declaration ID FCC / IC / CE / MIC All BT900 Series NoteNoteNoteNote 1:1:1:1: DSR, DTR, RI, and DCD can be implemented in the smart BASIC application. NoteNoteNoteNote 2:2:2:2: With I2C interface selected, pull-up resistors on I2C SDA and I2C SCL MUST be connected externally as per I2C standard. NoteNoteNoteNote 3333:::: SPI interface consists of SPI MOSI, SPI MISO and SPI CLK. SPI CS is created by customer using any spare SIO pin within their smartBASIC application script allowing multi-dropping. NoteNoteNoteNote 4:4:4:4: BT900 module comes loaded with smart BASIC runtime engine FW, but does not come loaded with any smart BASIC application script (as that is dependent on customer end application or use). Laird provides many sample smart BASIC applications covering the services listed. NoteNoteNoteNote 5555:::: Deep sleep consumes 233uA of power when the BT900 internal radio chip 32.768kHz is used. The smartBASIC runtime engine firmware (v9.1.2.0) has SIO (DIO default function) input pins that are PULL-UP enabled by default. You may disable the internal PULL_UP through a smartBASIC

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 application script. Lower Power consumption may be achieved when all SIO pins are set as outputs and low (in your smart BASIC application script). In deep sleep 7uA can be achieved if all SIO pins are set as output and low. 3 FCC AND IC REGULATORY STATEMENTS ModelModelModelModel US/FCC US/FCC US/FCC US/FCC CANADA/IC CANADA/IC CANADA/IC CANADA/IC BT900-US SQGBT900US 3147A-BT900US PART # PART # PART # PART # FORM FACTOR FORM FACTOR FORM FACTOR FORM FACTOR TX OUTPUT TX OUTPUT TX OUTPUT TX OUTPUT ANTENNA ANTENNA ANTENNA ANTENNA BT900-US USB Dongle 8 dBm Ceramic, Integrated 3.1 Power Exposure Information Federal Communication Commission (FCC) Radiation Exposure Statement: This EUT is in compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This transceiver must not be co-located or operating in conjunction with any other antenna, transmitter, or external amplifiers. Further testing / evaluation of the end product will be required if the OEM’s device violates any of these requirements. The BT900 is fully approved for mobile and portable applications. 3.2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution:FCC Caution:FCC Caution:FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:IMPORTANT NOTE:IMPORTANT NOTE:IMPORTANT NOTE:

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 FCC Radiation Exposure Statement:FCC Radiation Exposure Statement:FCC Radiation Exposure Statement:FCC Radiation Exposure Statement: The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 3.3 Industry Canada statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne peut causer d'interférences; et(2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Radiation Exposure Statement:Radiation Exposure Statement:Radiation Exposure Statement:Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations:Déclaration d'exposition aux radiations:Déclaration d'exposition aux radiations:Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. 4 EU DECLARATIONS OF CONFORMITY 4.1 BT900-US Manufacturer: Laird Product: BT900-US EU Directive: RTTE 1995/5/EC Conformity Assessment: Annex IV Table Table Table Table 2222: : : : Reference standards used for presumption of conformityReference standards used for presumption of conformityReference standards used for presumption of conformityReference standards used for presumption of conformity ArArArArticle Numberticle Numberticle Numberticle Number RequirementRequirementRequirementRequirement Reference standard(s)Reference standard(s)Reference standard(s)Reference standard(s) 3.1a Health and Safety EN60950-1:2006+A11:2009+A1:2010+A12:2011 3.1b Protection requirements with respect to electromagnetic compatibility EN 301 489-1 V1.9.2 (2011-09) EN 301 489-17 V2.2.1 (2012-09) Emissions: EN55022:2006/A1:2007 (Class B) Immunity: EN61000-4-2:2009

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 EN61000-4-3:2006/A1:2008/A2:2010 3.2 Means of the efficient use of the radio frequency spectrum EN 300 328 V1.8.1 (2012-06) Declaration:Declaration:Declaration:Declaration: We, Laird, declare under our sole responsibility that the essential radio test suites have been carried out and that the above product to which this declaration relates is in conformity with all the applicable essential requirements of Article 3 of the EU Directive 1999/5/EC, when used for its intended purpose. Place of Issue: Laird Saturn House, Mercury Park Wooburn Green HP100HH, United Kingdom tel: +44 (0)1628 858 940 fax: +44 (0)1628 528 382 Date of Issue: July 2014 Name of Authorized Person: Andrew Dobbing, Engineering Manager Signature:

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 5 ORDERING INFORMATION PartPartPartPart NNNNumberumberumberumber DescriptionDescriptionDescriptionDescription BT900-US Single Mode Pluggable USB BLE Module featuring smart BASIC – integrated antenna 5.1 General Comments This is a preliminary datasheet. Please check with Laird for the latest information before commencing a design. If in doubt, ask. 6 BLUETOOTH SIG QUALIFICATION The BT900-US module is listed on the Bluetooth SIG website as qualified End Products. Design Design Design Design NameNameNameName OwnerOwnerOwnerOwner Declaration Declaration Declaration Declaration IDIDIDID LLLLink to listing on the SIG websiteink to listing on the SIG websiteink to listing on the SIG websiteink to listing on the SIG website BT900 Laird Technologies D023116 https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=23116 It is a mandatory requirement of the Bluetooth Special Interest Group (SIG) that every product implementing Bluetooth technology has a Declaration ID. Every Bluetooth design is required to go through the qualification process, even when referencing a Bluetooth Design that already has its own Declaration ID. The Qualification Process requires each company to registered as a member of the Bluetooth SIG – www.bluetooth.org The following link provides a link to the Bluetooth registration page: https://www.bluetooth.org/login/register/ For each Bluetooth Design it is necessary to purchase a Declaration ID. This can be done before starting the new qualification, either through invoicing or credit card payment. The fees for the Declaration ID will depend on your membership status, please refer to the following webpage: https://www.bluetooth.org/en-us/test-qualification/qualification-overview/fees For a detailed procedure of how to obtain a new Declaration ID for your design, refer to the following document: https://www.bluetooth.org/DocMan/handlers/DownloadDoc.ashx?doc_id=283698&vId=317486 To start the listing, go to: https://www.bluetooth.org/tpg/QLI_SDoc.cfm In step 1, select the option, Reference a Qualified DesignReference a Qualified DesignReference a Qualified DesignReference a Qualified Design and enter xXXXX in the End Product table entry. You can then select your pre-paid Declaration ID from the drop down menu or go to the Purchase Declaration ID page. Note:Note:Note:Note: Unless the Declaration ID is pre-paid or purchased with a credit card, you cannot proceed until the SIG invoice is paid. Once all the relevant sections of step 1 are finished, complete steps 2, 3, and 4 as described in the help document. Your new Design will be listed on the SIG website and you can print your Certificate and DoC. For further information please refer to the following training material: https://www.bluetooth.org/en-us/test-qualification/qualification-overview/listing-process-updates

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 Additional Assistance Please contact your local sales representative or our support team for further assistance: Laird Technologies Connectivity Products Business Unit Support Centre: http://ews-support.lairdtech.com Email: wireless.support@lairdtech.com Phone: Americas: +1-800-492-2320 Option 2 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 Web: http://www.lairdtech.com/bluetooth

BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Embedded Wireless Solutions Support Center: Center: Center: Center: http://ewshttp://ewshttp://ewshttp://ews----support.lairdtech.comsupport.lairdtech.comsupport.lairdtech.comsupport.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 Laird is the world leader in the design and manufacture of customized, performance-critical products for wireless and other advanced electronics applications. Laird Technologies partners with its customers to find solutions for applications in various industries such as:  Network Equipment  Telecommunications  Data Communications  Automotive Electronics  Computers  Aerospace  Military  Medical Equipment  Consumer Electronics Laird offers its customers unique product solutions, dedication to research and development, as well as a seamless network of manufacturing and customer support facilities across the globe. CONN-HIG- BT900 Copyright © 2014 Laird. All rights reserved. The information contained in this manual and the accompanying software programs are copyrighted and all rights are reserved by Laird Technologies, Inc. Laird Technologies, Inc. reserves the right to make periodic modifications of this product without obligation to notify any person or entity of such revision. Copying, duplicating, selling, or otherwise distributing any part of this product or accompanying documentation/software without the prior consent of an authorized representative of Laird Technologies, Inc. is strictly prohibited. All brands and product names in this publication are registered trademarks or trademarks of their respective holders. This material is preliminary Information furnished by Laird Technologies in this specification is believed to be accurate. Devices sold by Laird Technologies are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. Laird Technologies makes no warranty, express, statutory, and implied or by description, regarding the information set forth herein. Laird Technologies reserves the right to change specifications at any time and without notice. Laird Technologies’ products are intended for use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional testing for such application. Limited Warranty, Disclaimer, Limitation of Liability Americas: +1-800-492-2320 Option 2 Europe: +44-1628-858-940 Hong Kong: +852-2923-0610 www.lairdtech.com/bluetooth http://ews-support.lairdtech.com

Navigation menu