Ezurio BT900US Intelligent BT4.0 Dual Mode USB Dongle User Manual BT900 US 1 0 Manual rev2
Laird Technologies Intelligent BT4.0 Dual Mode USB Dongle BT900 US 1 0 Manual rev2
Ezurio >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2496671 |
| Application ID | 39Bp8EXtblqmzuxMMKcfVQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.38kB (292210 bits) |
| Date Submitted | 2015-01-12 00:00:00 |
| Date Available | 2015-06-15 00:00:00 |
| Creation Date | 2017-10-19 07:10:09 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-19 07:10:09 |
| Document Title | Microsoft Word - BT900-US_1.0_Manual_rev2 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Connie.Lin |
Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852-2923-0610 Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module www.lairdtech.com/bluetooth Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Version Revision Date 1.0 Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Change History Initial Version Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Features & Benefits .......................................................................................................................................................... 5 1.2 Application Areas.............................................................................................................................................................. 5 , -.- Specification Summary ................................................................................................................................................... 6 (## & # 0)1 3.1 Power Exposure Information ........................................................................................................................................ 8 3.2 Federal Communication Commission Interference Statement ......................................................................... 8 3.3 Industry Canada statement ........................................................................................................................................... 9 -1 4.1 .# 2 ! BT900-US ............................................................................................................................................................................. 9 5.1 1.1 2.1 &' !( 1) General Comments ......................................................................................................................................................... 11 5) 1 . - Additional Assistance ................................................................................................................................................................. 12 Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module !" # $" BT900 Series modules from Laird Technologies make it easy to add Classic BT and Bluetooth Low Energy (BLE) functionality to small, portable, power-conscious devices, including those powered by batteries. The fully approved, programmable modules feature Laird’s innovative, event-driven smartBASIC programming language, which significantly reduces OEM development risk and speeds time to market. Based on the Cambridge Silicon Radio (CSR) 8811 silicon and a low power Cortex M3 microcontroller, the BT900 modules provide exceptionally low power consumption with outstanding wireless range, all within a compact footprint of 19 mm x 12.5 mm. The modules incorporate all the hardware and firmware required to support development of Dual Mode applications, including: Complete radio hardware UART, I2C, SPI, ADC, and GPIO interfaces Embedded BTv4.0 software stack - Classic BT profile - SPP - GATT Client & Peripheral Modes What makes the modules truly innovative is smartBASIC, an event-driven programming language that enables standalone operation of the module. Laird has extended the implementation of smartBASIC from the popular BL6xx series of single mode BLE modules into the BT900 series. This allows developers the flexibility of utilising the Core and BLE specific smartBASIC functions from the BL6xx series to create fully interchangeable BLE applications between these product ranges. Without the need for any external processor, a simple smartBASIC application encapsulates the complete end-to-end process of reading, writing, and processing of sensor data and then using Classic Bluetooth or BLE to transfer it to / from any Bluetooth device. Ultimately smartBASIC accelerates initial development, creation of prototypes, and mass production by providing you with your own Bluetooth expert within the module. In addition to carrying FCC modular, IC, CE and MIC approvals, BT900 modules are fully qualified as a Bluetooth product, enabling designers to integrate the modules in devices without the need for further Bluetooth testing. A low-cost developer’s kit including simple software tools simplifies module integration and guarantees the fastest route to market. % &' ( & Bluetooth v4.0 - Dual Mode (Classic Bluetooth and BLE) External or Internal Antennas smartBASIC programming language Full Bluetooth EPL Compact Footprint Programmable TX power 8dBm to -20dBm RX sensitivity: -90dBm Ultra low power consumption TX: 85 mA peak (at +8dBm) Standby Doze: 2.7mA (see Note2 in Error! Error! Reference source not found. Deep Sleep: 233uA UART, GPIO, ADC, PWM, FREQ output, TIMERS, I2C, and SPI interfaces Fast Time to Market FCC, CE, IC, and Japan certified; other certs on request No external components required Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth ) "** + "% & Medical devices Wellness devices Automotive Diagnostic Equipment Bar Code Scanners Industrial Cable Replacement Home automation Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module * +(+ $ " Table 1: Specifications Categories Wireless Specification -- %. Feature Implementation Bluetooth® V4.0 – Dual-Mode Frequency 2.402 - 2.480 GHz Transmit Power + 8 dBm (maximum) Configurable down to -20 dBm Receive Sensitivity -90 dBm (typical) Link Budget 98 dB Raw Data Rates (Air) 3 Mbps (Classic BT – BR/EDR) UART Interface GPIO Host Interface and Peripherals Profiles Maximum Connections Programmability 18 (maximum – configurable) lines. O/P drive strength (4 mA) Pull-up resistor (33 KOhms) control (via smartBASIC) Read pin-level I2C Interface 1 (configurable from GPIO total). Up to 400 kbps SPI 1 (configurable from GPIO total). Up to 4 Mbps ADC Interface 2 channels (configured from GPIO total). Up to 12-bit resolution Conversion time 2.0uS (at VCC 2.7V to 3.6V) Reference voltage AVCC (external, same as VCC) pre-scaling to match BL600 ADC PWM or FREQ output Output a PWM or FREQ on up to 3 GPIO output pins. PWM output duty cycle: 0%-100% PWM output frequency: 500 kHz FREQ output frequency: 0 MHz to 4 MHz (50% duty cycle) Wi-Fi-BT coexistence 3 dedicated pins Classic Bluetooth SPP (Serial Port Profile) –Greater than 500kbps Bluetooth Low Energy GATT Client & Peripheral – Any Custom Services Classic Bluetooth Bluetooth Low Energy 7 clients 5 clients smartBASIC On-board programming language similar to BASIC smartBASIC application Via UART or Over the Air Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth TX, RX, CTS, RTS DTR, DSR, DCD, RI can be implemented in smartBASIC- using General Purpose I/O Default 115200, N, ,8, 1 From 1,200 to 921600 RX buffer size (1024 bytes) Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Categories Feature Any that can be implemented using smartBASIC vSP – Virtual Serial Port for BLE – Command Mode Only Control Protocols FW upgrade Coexistence smartBASIC runtime engine 802.11 (Wi-Fi) 3 wire CSR schemes supported (Unity-3 for classic BT, Unity-3e for BLE) Self-contained Run Mode Selected by nAutoRUN pin status: LOW (0V). Then runs $autorun$ (smartBASIC application) if it exists. Interactive Development Mode Environmental Miscellaneous Development Tools Software Tools Approvals Note 1: HIGH (VCC). Then runs via at+run (and “file name” of smartBASIC application script). Supply Nominal 5VDC Current Max Peak Current (TX Power @ +8 dBm TX): 85 mA Standby Doze (waitevent) – 2.7mA (at 4MHz clock) (Note 5) Power Consumption Physical Via UART FW upgrade Operating Modes Supply Voltage Implementation Deep Sleep – 233 uA (external signal wakeup) See Note 5 User Configurable Clocking User configurable clocking (40MHz, 20MHz, 4MHz), so user can reduce current consumption further. Dimensions 50.7mm x 18.5mm x 10.4mm Operating -40°C to +85°C Storage -40°C to +85°C Lead Free Lead-free and RoHS compliant Warranty One Year Development Kit Development board and free software tools Utilities Windows, Android and iOS applications UART Firmware Upgrade Bluetooth® Complete Declaration ID FCC / IC / CE / MIC All BT900 Series DSR, DTR, RI, and DCD can be implemented in the smart BASIC application. Note 2: With I2C interface selected, pull-up resistors on I2C SDA and I2C SCL MUST be connected externally as per I2C standard. Note 3: SPI interface consists of SPI MOSI, SPI MISO and SPI CLK. SPI CS is created by customer using any spare SIO pin within their smartBASIC application script allowing multi-dropping. Note 4: BT900 module comes loaded with smart BASIC runtime engine FW, but does not come loaded with any smart BASIC application script (as that is dependent on customer end application or use). Laird provides many sample smart BASIC applications covering the services listed. Note 5: Deep sleep consumes 233uA of power when the BT900 internal radio chip 32.768kHz is used. The smartBASIC runtime engine firmware (v9.1.2.0) has SIO (DIO default function) input pins that are PULL-UP enabled by default. You may disable the internal PULL_UP through a smartBASIC Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module application script. Lower Power consumption may be achieved when all SIO pins are set as outputs and low (in your smart BASIC application script). In deep sleep 7uA can be achieved if all SIO pins are set as output and low. 0 1" Model US/FCC CANADA/IC BT900-US SQGBT900US 3147A-BT900US PART # FORM FACTOR TX OUTPUT ANTENNA BT900-US USB Dongle 8 dBm Ceramic, Integrated , 2 % 3* & % ( %- Federal Communication Commission (FCC) Radiation Exposure Statement: This EUT is in compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This transceiver must not be co-located or operating in conjunction with any other antenna, transmitter, or external amplifiers. Further testing / evaluation of the end product will be required if the OEM’s device violates any of these requirements. The BT900 is fully approved for mobile and portable applications. /) -- -- && %( % + This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module FCC Radiation Exposure Statement: The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. // & %. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne peut causer d'interférences; et(2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. 1" " Manufacturer: Product: EU Directive: Conformity Assessment: Laird BT900-US RTTE 1995/5/EC Annex IV Table 2: Reference standards used for presumption of conformity Article Article Number Requirement Reference standard(s) 3.1a Health and Safety EN60950-1:2006+A11:2009+A1:2010+A12:2011 Protection requirements with respect to electromagnetic compatibility EN 301 489-1 V1.9.2 (2011-09) EN 301 489-17 V2.2.1 (2012-09) Emissions: EN55022:2006/A1:2007 (Class B) Immunity: EN61000-4-2:2009 3.1b Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module EN61000-4-3:2006/A1:2008/A2:2010 3.2 Means of the efficient use of the radio frequency spectrum EN 300 328 V1.8.1 (2012-06) Declaration: We, Laird, declare under our sole responsibility that the essential radio test suites have been carried out and that the above product to which this declaration relates is in conformity with all the applicable essential requirements of Article 3 of the EU Directive 1999/5/EC, when used for its intended purpose. Place of Issue: Laird Saturn House, Mercury Park Wooburn Green HP100HH, United Kingdom tel: +44 (0)1628 858 940 fax: +44 (0)1628 528 382 Date of Issue: July 2014 Name of Authorized Person: Andrew Dobbing, Engineering Manager Signature: Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Part Number Description BT900-US Single Mode Pluggable USB BLE Module featuring smart BASIC – integrated antenna -- This is a preliminary datasheet. Please check with Laird for the latest information before commencing a design. If in doubt, ask. 0 7 "1 $ " The BT900-US module is listed on the Bluetooth SIG website as qualified End Products. Design Name Owner Declaration ID Link to listing on the SIG website BT900 Laird Technologie D023116 https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=23116 It is a mandatory requirement of the Bluetooth Special Interest Group (SIG) that every product implementing Bluetooth technology has a Declaration ID. Every Bluetooth design is required to go through the qualification process, even when referencing a Bluetooth Design that already has its own Declaration ID. The Qualification Process requires each company to registered as a member of the Bluetooth SIG – www.bluetooth.org The following link provides a link to the Bluetooth registration page: https://www.bluetooth.org/login/register/ For each Bluetooth Design it is necessary to purchase a Declaration ID. This can be done before starting the new qualification, either through invoicing or credit card payment. The fees for the Declaration ID will depend on your membership status, please refer to the following webpage: https://www.bluetooth.org/en-us/test-qualification/qualification-overview/fees For a detailed procedure of how to obtain a new Declaration ID for your design, refer to the following document: https://www.bluetooth.org/DocMan/handlers/DownloadDoc.ashx?doc_id=283698&vId=317486 To start the listing, go to: https://www.bluetooth.org/tpg/QLI_SDoc.cfm In step 1, select the option, Reference a Qualified Design and enter xXXXX in the End Product table entry. You can then select your pre-paid Declaration ID from the drop down menu or go to the Purchase Declaration ID page. Note: Unless the Declaration ID is pre-paid or purchased with a credit card, you cannot proceed until the SIG invoice is paid. Once all the relevant sections of step 1 are finished, complete steps 2, 3, and 4 as described in the help document. Your new Design will be listed on the SIG website and you can print your Certificate and DoC. For further information please refer to the following training material: https://www.bluetooth.org/en-us/test-qualification/qualification-overview/listing-process-updates Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module "&& & Please contact your local sales representative or our support team for further assistance: Laird Technologies Connectivity Products Business Unit Support Centre: http://ews-support.lairdtech.com Email: wireless.support@lairdtech.com Phone: Americas: +1-800-492-2320 Option 2 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 Web: http://www.lairdtech.com/bluetooth Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 BT900-US Hardware Integration Guide Intelligent BTv4.0 Dual Mode Module Laird is the world leader in the design and manufacture of customized, performance-critical products for wireless and other advanced electronics applications. Laird Technologies partners with its customers to find solutions for applications in various industries such as: Network Equipment Telecommunications Data Communications Automotive Electronics Computers Aerospace Military Medical Equipment Consumer Electronics Laird offers its customers unique product solutions, dedication to research and development, as well as a seamless network of manufacturing and customer support facilities across the globe. Americas: +1-800-492-2320 Option 2 Europe: +44-1628-858-940 Hong Kong: +852-2923-0610 www.lairdtech.com/bluetooth http://ews-support.lairdtech.com CONN-HIG- BT900 Copyright © 2014 Laird. All rights reserved. The information contained in this manual and the accompanying software programs are copyrighted and all rights are reserved by Laird Technologies, Inc. Laird Technologies, Inc. reserves the right to make periodic modifications of this product without obligation to notify any person or entity of such revision. Copying, duplicating, selling, or otherwise distributing any part of this product or accompanying documentation/software without the prior consent of an authorized representative of Laird Technologies, Inc. is strictly prohibited. All brands and product names in this publication are registered trademarks or trademarks of their respective holders. This material is preliminary Information furnished by Laird Technologies in this specification is believed to be accurate. Devices sold by Laird Technologies are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. Laird Technologies makes no warranty, express, statutory, and implied or by description, regarding the information set forth herein. Laird Technologies reserves the right to change specifications at any time and without notice. Laird Technologies’ products are intended for use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional testing for such application. Limited Warranty, Disclaimer, Limitation of Liability Embedded Wireless Solutions Support Center: http://ewshttp://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : Connie.Lin Create Date : 2014:12:22 13:33:59Z Modify Date : 2014:12:25 13:58:26+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Connie.Lin Title : Microsoft Word - BT900-US_1.0_Manual_rev2 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2014:12:25 13:58:26+08:00 Producer : GPL Ghostscript 8.15 Document ID : uuid:846dcc0b-3ea1-44db-a5d4-5feb7bf825a6 Instance ID : uuid:7fc79082-00cb-4cdd-a7c9-09cb8fec0783 Page Count : 13EXIF Metadata provided by EXIF.tools