FDY Digital Electronics W3A Wall-Mounted Smart Home Speaker User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2991703
Application ID	rUAV4h8yWndV+9B0QzQ+6A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	183.72kB (2296494 bits)
Date Submitted	2016-05-16 00:00:00
Date Available	2016-05-17 00:00:00
Creation Date	2016-04-23 14:25:06
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2016-04-23 14:25:06
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	Administrator

Wall-Mounted Smart Home Speaker
Wall-Mounted Smart Home Speaker
Wall-Mounted Smart Home Speaker
APP Function Operation Guide
Wall-Mounted Smart Home Speaker
Wall-Mounted Smart Home Speaker
Click"Help" to enter into the interface, Click "+" to add the starting and endi
ng time,and date that you want to set up . Once the function is set up, even
smartphone is switchedoff, it still can work , the relative interfaces:(Picture
18, Picture 19,Picture 20,Picture 21).
a.To download "bwalls" APP to smart phone and install it from APPLE APP stor
e. After nishing the installation, The smartphone will show as the following
picture:
The Best Wall Sound
b.First, please open the bluetooth of smartphone,then searching for the speak
er bluetooth name"bwalls" to connect, After connection, run the installed A
PP ,enter into functions of APP( Picture 1),Then,click the upper left corner to
connect thedevice, to check the bluetooth data has been connected or not c
onnected data shows as picture 2, on the right , it will mark"√").Android APP
will connect bluetooth data automatically,For IOS version APP, need to conn
ect by hand.
User Guide Manual
Picture 10
Picture 7
c.USB play
Insert the USB disk which saved songs to play music ,Click USB,The speak
er will prompt the USB has been inserted in, Relatve USB control interfaces
are as followings:(picture 8,Picture 9).
Picture 11
e.AUX IN Play
When you insert Aux in cable into the speaker, APP will shift to AUX interfa
ce (picture 13),The speaker will give waring tone of AUX_In,At the same ti
me, you can hear the sweet music from outside device. Cick“
”to stop m
usic playing.
Picture 16
Picture 17
Picture 18
i.Theme Colour
Click "Theme Colour" to choose the colors of background your like(Picture
19).
Function Key:
Play/Pause:
In the status of playing music, short press the key to pause or resume to play
, in the mode of AUX, short press to muse, in the mode of bluetooth ,long pre
ss to disconnect and wait for pairing.
Next Song:
In the mode of bluetooth,USB, short press it to next song, In the mode of FM
radio, long press it to increase volume.
Nightlights
Picture 13
Picture 2
Picture 3
Picture 1
c.After connection, APP will show like picture 3, at this time, you can control th
e relative functions of the speaker.
a.Local Music
Click "Local Music" to play music in the smartphone (picture 4),then choose a
ny song to enter into (Picture 5) interface to control every function;Click the u
pper "Sound Effect" to enter into Picture 6 interface to adjust sound effects a
ccordingly (This function als can work in the status of other sound source).
Short press it to adjust its brightness ( three level ajustment).Long press it to
switch off the nightlights.
Picture 14
Picture 9
g.More
Enter into more function to click the upper right“
USB (optional).
Nightlights window
Picture 5
Picture 6
3M adhesive tape
Picture 20
Picture 21
1. Output power: 3W x 4
2. Speaker: Ø40mm x 4+(46mm*86mm) x 2
3. Frequency response: 80-18kHz
4. S/N Ratio: ≥85dB
5. Distortion degree: 1%
6. LED colour temperature: 2850K
7. Product size: 220x220x50mm(LxWxD)
1. Adapter X1
2. User Guide Manual X1
3. Wall-mounted baseplate X1(3M adhensive tape x2)
4.Screws X2
It can choose some countries' FM frequency.
Picture 4
Picture 19
k.About
Click "About" to show APP version(Picture 21).
Click the upper right corner “
” to seach for radio stations automatically;
Click the lower left corner“
”to check and choose the saved stations list;
AUX IN
”Icon (Picture 15).
j.Rename
Click "Rename" to compile device name(Picture 20).
d.FM Radio
Click FM radio to enter “
” into FM radio interface as picture
10, the ralative interfaces are as picture 11,Picture 12;
Power input interface, this interface just supports the 6 volta
ge adapter matched with this product.
Patented product,counterfeiting.
Before use of the speaker, please read user guide manual carefully.
The product pictures are only for reference, please refer to actual item.
Picture 8
Wall mounted baseplate
b.Installation of the speaker
Insert the speaker into the xed baseplate then pull down the speaker to e
nsure it xed tightly.
Note: 1. When the speaker is on the wall, to insert USB or AUX in cable ,
we suggest that you had better use one hand to buttress the speak
er because the upper power will cause the speaker off the basepla
te and damage the speaker.
2. If you need to discharge the baseplate pasted on the wall by 3M
adhensive tape, to avoid damage of the wall, we suggest you use
alcohol to water the tape slowly then tear the tape lightly.
f.Functions of nightlights
To click the upper “
”Icon to control night lights (Picture 14),BWALLS jus
t has nightlights,off,light and the lower“
”brightness adjustment
functions.
2.APP function operation
a.Installation of baseplate
If the wall is smooth and strong enough, it can be pasted on the wallor the
glass directly by the 3M adhesive tape,if not, we suggest to use the scre
ws to ensure it xed.
Picture 12
Short press the key to shift bluetooth,FM radio,USB & the sound source devi
ces already connected with the speaker.
When play music via bluetooth & USB, short press to previous song, In the st
atus of FM, short press the key to previous.
Wall-Mounted Smart Home Speaker
Wall-Mounted Smart Home Speaker
h.Help
b.Listen to music on the line
To ensure that your smartphone are connecting with inernet to play & listen
to the music on the line,play on the line as the followings:(picture 7).
1.Installation & connection of APP
Wall-Mounted Smart Home Speaker
Picture 15
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation
of the device.
This equipment should be installed and operated with a minumum
distance of 20 cm between the radiator and your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2016:04:23 14:25:06+08:00
Modify Date                     : 2016:04:23 14:25:06+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : Administrator
Creator                         : CorelDRAW X6
Title                           : 未命名 -1

EXIF Metadata provided by EXIF.tools