FEIBIT ELECTRONIC TECHNOLOGY FPUGW01 USB Dongle User Manual Smart USB Dongle Manaul

SHENZHEN FEIBIT ELECTRONIC TECHNOLOGY Co., LTD USB Dongle Smart USB Dongle Manaul

15_FED87F3-TTHW UserMan r3

01
Smart USB Dongle
Manual
03
Specification
02
Introduction Specification
The Front side of the product
Product Details
Working Voltage and Power: DC 5V 200mA
Rated Power: 0.5W
Frequency: 2405M~2480MHZ
Protocol:zigbee HA
Accessible Communicate Distance: 200m
Accessible Networking Distance: 100m
Receiving Sensibility: -97dBm
Maximum transmit power: 20dBm
Working Temperature Range: -25~+70
Maximum Transmitted Power: 20dBm
Dimension: Diameter 30.99mm, High 13.17mm
0706
1. The product communicates wireless, please don’t
put the antenna in the metal box to prevent the signal
form shielding.
2. The temperature environment range is between -25
and +70 , the humidity environment: 95% RH
maximum;
3. Avoid chemical or flammable gas, saturate salt mist ,
long time high-humidity and other abnormal
environment.
This product is under maintenance for free in one year,
except the damage by improper use.
The following situations are beyond the scope of free
warranty.
1. Taken apart and maintained by unauthorized maint-
enance center.
2. Damage by flood,fire,thundering and other natural
disasters.
3. Damage by extrusion,watering,dampness or other
artificial damage.
4. Broken down by using the product not accord- ing to
the user manual.
08
Announcement Warranty
Appreciate that you purchase smart USB Dongle
gateway FED87F3-TTHW (Hereinafter referred to
as the gateway).
Smart USB dongle gateway is easy to carry and
simple to operate control interface, thus avoiding
several setting problems. Based on latest HA
protocol, this product can be wirelessly connected
with Zigbee Light Link lights and HA protocol
socket to provide strong wireless control.
5. Gateway to restore the factory settings: Click
"reset all data" can be cleared in the gateway device
(sensor equipment to wake up), the channel will be
set to 19 channels.
04
Operation
1. Connect the gateway to the computer with a data
cable.
2. Open the ZLL Test software (Software, please
consult with sales or after - sales personnel), find
the device, select the correct serial number, click on
the link;
05
In addition to the network
of other operations
Allow devices joining the
network
Indicator Gateway status
Green light long bright
When the red light is flashing,
the green light is on
green light flashing 1min
Red light long bright
Charge gateway
Gateway resets all data
3. Allow devices joining the network
In the gateway information column, click Get
gateway information” to get the gateway version and
so on, click "Allow network", allow other devices to
join the gateway
Press the button on the gateway to enter the key
S1, you will see the green light began to ash 1min to
allow the device network.
4.Indicator status:
State:During the use of FED87F3-TTHW, the distance from the
human body can be 5mm.
Feeral Communication Commission (FCC) Radiation Exposure
Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to
this equipment. Such modifications or changes could void the
user’s authority to operate the equipment.
USB Dongle(Model No:FED87F3-TTHW)has been evaluated to
meet general RF exposure requirement, USB Dongle(Model
No:FED87F3-TTHW) can be used in portable exposure condition
without restriction.

Navigation menu