FLYPRO AEROSPACE TECH FLYPRO FLYPRO-WUZEI User Manual Manual

SHENZHEN FLYPRO AEROSPACE TECH CO.,LTD FLYPRO-WUZEI Manual

Manual

Age：12+Safety Warning：• To ensure safety, parents should read this User’s Manul with chilren before start playing.• To avoid injury, do not touch the product while flying or the propellers still move.• Be careful to keep your body and loose clothing away from the propellers and motors.Do not modify or change this product without authorization, or it may injury of your rightsand interests for this product.1106 SQUID User’s ManualPackage Content:⊙Drone ⊙7.4V 530mAh 2S Li-Po Battery ⊙USB Charging Cable ⊙Spare Propeller x2(Ax1,Bx1） ⊙User’s ManualSpecificationsCharge the Li-Po Battery正面反面风琴折成品尺寸：105x135mm 展开尺寸：315x135mmUse lithium polymer battery(530mAh）⊙ Plug USB cable into the charge port of the battery.。⊙ Connect USB cable with power source (eg:laptop). The USB connector red LED light on and steady while charging, the LED off when charging is complete. A full charge will take about 60 minutes. A fully charged battery provides up to 6 minutes flight time.⊙ After fully charged, unplug the USB charging cable. Do not attempt to overcharge.Note：Only use the provided USB charging cable, other charege cable may demage the battery.Download and Install APP.iPod、iPhone and iPad users search“Flypro-SQUID”in App Store to download and install the APP. Android Android users search “Flypro-SQUID”in Google Play to downloadand install the APP.⊙ IOS 8.0 or above ⊙ Android 4.2 or aboveBatteryControl RangeFlying TimeOperating Temperature530mAh 30m（100ft）6 mins5℃一40℃CameraPhoto Resolution/FormatVideo Resolution/Format720P1280 x720 JPG1280 x720 MP4⊙ Press and hold the ON/OFF button until the LED on the drone quickly flash. ⊙ Turn on the wifi to search and connect " Flypro-WUZEI -XXXXXX" on the mobile device, the LED flash on the drone slow down means wifi connection successful.⊙ Open the APP to enter operation interface，the LED on thedrone stop flash. The drone can be operate when the mobile device interface show the image that the camera captured.Note：* If wifi“ Flypro-WUZEI -XXXXXX”is not available，try to restart the wifisetting on your mobile device.*If pair failed, try to restart the drone and repeat the pairing steps. Or movelocation to avoid interference.Connect Mobile Device and Drone.Settings Battery InfoMotion SensorOne Button LandingOne Button Take offFight Hright Link StateTake Photo360° Fixed-CenterRoundingWaypoint FlightTake VideoMultimediaSpeed SettingHelp updownTurnLeft TurnRightThrottleForwardBackwardSlide Left Slide RightSteeringNote: Flight the drone for the first time or the drone is not able to flight straight, please refer to the“Calibration”step to calibrate the drone.Basic Flight（1）After calibration, click ( )can switch speed from30% 60% and 100%.（2）Click“One Button Take Off”( ), the drone will automatically ascending about 50 ft (150cm) then hover and waiting for instruction.（3）Move the throttle forward / backward can ascend/descend the drone. Move the steering forward/backward/left/right can control the drone fly forward/backward/left/right.（4）Click the “One Button Landing( ) while flying, the drone wil slowly descend untill landing to the ground and the propellers stop moving.（5）Turn off the drone when after landing. Note：Move the function stick slowly, otherwise the propellers of the drone may stop working and drmage the drone may causing.30%1. Place the drone in a flat ground2. Click the“settings”（ ）to popup the settings window，Click Accel-eration Trim and follow the prompts.3. The LED on the drone quikly flash while trimming4. Calibration successful when LED stop flash.Calibration Safety Notes:Camera ApplicationWhen the drone flight stably.⊙ Take photo：Click ( ) one time，the mobile device will buzzing one time, and the green LED on the rear arm of the drone will flash one time. ⊙ Record video：Click ( ) the green LED on the rear of the drone will flashing click again to stop recording.⊙Multimedia: Click ( ) to enter multimedia to check the recorded photo and video.Waypoint Flight360° Fixed-Center RoundingClick the “Waypoint Flight” button（ ）to popup operation interface. Lineation randomly on the interface, the drone will flight along the pathline. Click the cancel button or re-planning a path can cancel the last flight path.Click the “360° Fixed-Center Rounding”the drone will rounding and record video surround the original point . Click the 360° Fixed-Center Rounding”again to exit.Click the Motion Sensor Button（ ）to entering notion sensor control, steerthe flight direction by tilt the mobile device wtih corresponding direction.⊙ Click the “Settings”（ ）to choose the location of the throttle.Players can switch the location of throttle between left or right. Note: Factory setting the throttle on the left.Motion SensorSwitch the Throttle LocationReplacing PropellerThrottle UpThrottle DownTurn LeftTurnRightForwardBackwardSlideLeftSlideRight（ Throttle on the left） （Throttle on the right）ForwardBackwardTurnLeft TurnRightThrottle UpThrottle DownSlideLeft TSlideRightMade in China Version:20170710001FCC STATEMENT：This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.• The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm.The *4’s propellers are not identical. Each propellers is labeled with an A or B.When installing replacement propellers, be certain to insatlled the A/B correspondingly.Take advantage of plier if the propellers cannoby hand.。AABB• Keep the drone away from crowds, operating the drone in a wide space.• Operating the drone in legal place.• Keep the drone within sight.• Ensure the battery is sufficient charged before operating the drone.• Ensure the propellers no demage and tightly installed.• Keep away from the working propellers while flight.• Do not making or receiving call while flight.• Do not operating the drone after drinking or drug.• Landing the drone when low power.• Landing the drone when the drone is not able to flight straight.

Navigation menu