FLYPRO AEROSPACE TECH FLYPRO FLYPRO-WUZEI User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	3538677
Application ID	3vtRXacOrmOCBMOwGFbTCg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	404.99kB (5062391 bits)
Date Submitted	2017-08-31 00:00:00
Date Available	2017-09-01 00:00:00
Creation Date	2017-07-11 09:18:18
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-08-22 13:47:09
Document Title	乌贼飞蝶1106说明书-英文
Document Creator	Adobe Illustrator CS6 (Windows)

Age：12+
Download and Install APP.
Safety Warning：
• To ensure safety, parents should read this User’s Manul with chilren before start playing.
• To avoid injury, do not touch the product while flying or the propellers still move.
• Be careful to keep your body and loose clothing away from the propellers and motors.
Do not modify or change this product without authorization, or it may injury of your rights
and interests for this product.
iPod、iPhone and iPad users search“Flypro-SQUID”in App Store to download
and install the APP.
Android Android users search “Flypro-SQUID”in Google Play to download
and install the APP.
⊙ IOS 8.0 or above
⊙ Android 4.2 or above
Package Content:
Connect Mobile Device and Drone.
⊙Drone
⊙7.4V 530mAh 2S Li-Po Battery
⊙Spare Propeller x2(Ax1,Bx1）
⊙USB Charging Cable
⊙User’s Manual
Specifications
530mAh
720P
Camera
Control Range 30m（100ft） Photo Resolution/Format 1280 x720 JPG
6 mins
Flying Time
Video Resolution/Format 1280 x720 MP4
Operating
5℃一40℃
Temperature
Battery
Charge the Li-Po Battery
Use lithium polymer battery(530mAh）
⊙ Plug USB cable into the charge port of the battery.。
⊙ Connect USB cable with power source (eg:laptop). The USB connector
red LED light on and steady while charging, the LED off when charging
is complete. A full charge will take about 60 minutes. A fully charged
battery provides up to 6 minutes flight time.
⊙ After fully charged, unplug the USB charging cable. Do not attempt to
overcharge.
Note：Only use the provided USB charging cable, other charege cable may
demage the battery.
正面
1106 SQUID User’s Manual
⊙ Press and hold the ON/OFF button until the LED on the drone quickly flash.
⊙ Turn on the wifi to search and connect " Flypro-WUZEI -XXXXXX" on
the mobile device, the LED flash on the drone slow down means wifi
connection successful.
⊙ Open the APP to enter operation interface，the LED on thedrone stop
flash. The drone can be operate when the mobile device interface show
the image that the camera captured.
Note：
* If wifi“ Flypro-WUZEI -XXXXXX”is not available，try to restart the wifi
setting on your mobile device.
* If pair failed, try to restart the drone and repeat the pairing steps. Or move
location to avoid interference.
Settings
Help
Battery Info
Take Photo
Take Video
Waypoint Flight
Multimedia
Speed Setting
Throttle
up
One Button
Take off
One Button
Landing
Turn
Right
down
Calibration
Waypoint Flight
2. Click the“settings”（ ）to popup the settings window，Click Acceleration Trim and follow the prompts.
3. The LED on the drone quikly flash while trimming
4. Calibration successful when LED stop flash.
Note:
Flight the drone for the first time or the drone is not able to flight
straight, please refer to the“Calibration”step to calibrate the drone.
Basic Flight
（1）After calibration, click (
)can switch speed from30% 60% and 100%.
（2）Click“One Button Take Off”(
), the drone will automatically ascending
about 50 ft (150cm) then hover and waiting for instruction.
（3）Move the throttle forward / backward can ascend/descend the drone.
反面
Move the steering forward/backward/left/right can control the drone
fly forward/backward/left/right.
（4）Click the “One Button Landing(
) while flying, the drone wil slowly
360° Fixed-Center Rounding
Click the “360° Fixed-Center Rounding”the drone will rounding and record
video surround the original point . Click the 360° Fixed-Center Rounding”
again to exit.
Click the Motion Sensor Button（ ）to entering notion sensor control, steer
the flight direction by tilt the mobile device wtih corresponding direction.
Switch the Throttle Location
⊙ Click the “Settings”（ ）to choose the location of the throttle.Players
can switch the location of throttle between left or right.
Note: Factory setting the throttle on the left.
descend untill landing to the ground and the propellers stop moving.
（5）Turn off the drone when after landing.
Note：Move the function stick slowly, otherwise the propellers of the drone
may stop working and drmage the drone may causing.
Camera Application
When the drone flight stably.
⊙ Take photo：Click (
) one time，the mobile device will buzzing one
time, and the green LED on the rear arm of the drone will flash one time.
⊙ Record video：Click ( ) the green LED on the rear of the drone will
flashing click again to stop recording.
⊙Multimedia: Click (
) to enter multimedia to check the recorded photo
and video.
风琴折
成品尺寸：105x135mm
展开尺寸：315x135mm
Throttle Up
Turn
Left
Turn
Right
Motion Sensor
Steering
Forward
Slide Left
Slide Right
Backward
Safety Notes:
Click the “Waypoint Flight” button（ ）to popup operation interface.
Lineation randomly on the interface, the drone will flight along the path
line. Click the cancel button or re-planning a path can cancel the last
flight path.
Motion Sensor
30%
Link State
360° Fixed-Center
Rounding
Turn
Left
1. Place the drone in a flat ground
Fight Hright
Forward
Throttle Up
Forward
Slide
Slide
Turn
Turn
Slide
TSlide
Left
Right
Left
Right
Left
Right
Throttle Down
Backward
FCC STATEMENT：
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Throttle Down
Backward
（ Throttle on the left）
• Keep the drone away from crowds, operating the drone in a wide space.• Operating the
drone in legal place.
• Keep the drone within sight.
• Ensure the battery is sufficient charged before operating the drone.
• Ensure the propellers no demage and tightly installed.
• Keep away from the working propellers while flight.
• Do not making or receiving call while flight.
• Do not operating the drone after drinking or drug.
• Landing the drone when low power.
• Landing the drone when the drone is not able to flight straight.
（Throttle on the right）
Replacing Propeller
The *4’s propellers are not identical. Each
propellers is labeled with an A or B.When
installing replacement propellers, be certain
to insatlled the A/B correspondingly.Take
advantage of plier if the propellers cannoby
hand.。
The antenna(s) used for this transmitter must
be installed to provide a separation distance
of at least 20 cm from all persons and must
not be co-located or operating in conjunction
with any other antenna or transmitter.
Made in China Version:20170710001
• The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : 乌贼飞蝶1106说明书-英文
Metadata Date                   : 2017:08:22 13:47:09+08:00
Modify Date                     : 2017:08:22 13:47:09+08:00
Create Date                     : 2017:07:11 09:18:18+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 220
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 26178 bytes, use -b option to extract)
Instance ID                     : uuid:fae7a330-9d6c-4497-a7da-e04e667e189a
Document ID                     : xmp.did:F90510CFD665E711B500C9B3A987F010
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:e00fba18-b47c-4c12-bf2c-e38d2c10083e
Derived From Document ID        : xmp.did:44D02E180965E711B822FA8F485A4BC3
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:9B94D4B72CBCE611A1E085A8813D3FEB, xmp.iid:F90510CFD665E711B500C9B3A987F010
History When                    : 2016:12:12 09:10:59+08:00, 2017:07:11 09:18:12+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : F:\乌贼\说明书\乌贼飞蝶1106 中文说明书(1).jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 394.405556
Max Page Size H                 : 308.327778
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, MicrosoftYaHei-Bold, MicrosoftYaHei, AdobeSongStd-Light
Font Family                     : Arial, Arial, 微软雅黑, 微软雅黑, Adobe 宋体 Std
Font Face                       : Bold, Regular, Bold, Regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.06, Version 5.06, Version 6.02, Version 6.02, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False
Font File Name                  : arialbd.ttf, arial.ttf, msyhbd.ttf, msyh.ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 15.0
For                             : Administrator,
Bounding Box                    : 52 25 1030 852
Container Version               : 11
Creator Version                 : 15
Image Height                    : 827
Image Width                     : 978
Image Size                      : 978x827
Megapixels                      : 0.809

EXIF Metadata provided by EXIF.tools