FLYTECH TECHNOLOGY BED-185 Terminal Hardware System User Manual K938S indb

FLYTECH TECHNOLOGY CO., LTD Terminal Hardware System K938S indb

Contents

manual1

USER MANUALTerminalHardware SystemVERSION V0.9 MAY 2010
iiCopyright 2010 MayAll Rights ReservedManual Version 0.9Part Number: The information contained in this document is subject to change without notice.We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer.TRADEMARKIntel® and CoreTM Duo are registered trademarks of Intel® Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Other trademarks mentioned herein are the property of their respective owners.
iiiSafetyIMPORTANT SAFETY INSTRUCTIONSTo disconnect the machine from the electrical power supply, turn off the power 1. switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine.Read these instructions carefully. Save these instructions for future reference.2. Follow all warnings and instructions marked on the product.3. Do not use this product near water.4. Do not place this product on an unstable cart, stand, or table. The product may 5. fall, causing serious damage to the product.Slots and openings in the cabinet and the back or bottom are provided for 6. ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register or in a built-in installation unless proper ventilation is provided.This product should be operated from the type of power indicated on the marking 7. label. If you are not sure of the type of power available, consult your dealer or local power company.Do not allow anything to rest on the power cord. Do not locate this product where 8. persons will walk on the cord.Never push objects of any kind into this product through cabinet slots as they 9. may touch dangerous voltage points or short out parts that could result in a re or electric shock. Never spill liquid of any kind on the product.CE MARKThis device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”.FCCThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
ivCAUTION ON LITHIUM BATTERIESThere is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.LEGISLATION AND WEEE SYMBOL2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dust bin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract.This product should not be mixed with other commercial wastes for disposal.
vRevision HistoryChanges to the original user manual are listed below:Revision Description Date0.9 Initial release• 2010 May
viTable of Contents1. Item Check List ........................ 11-1. Standard Items ........................................................12. System View ............................. 22-1. Front View ...............................................................22-2. Rear View ................................................................22-3. I/O Ports View ..........................................................33. Driver Installation .................... 43-1. Driver List ................................................................43-2. Chipset Driver Installation ........................................53-3. VGA Driver Installation ............................................63-4. Audio Driver Installation ...........................................83-5. LAN Driver Installation .............................................93-6. POSTouch Driver Installation .................................. 114. Peripheral Installation ............ 154-1. Phone Set Installation .............................................154-2. Stand Installation ....................................................165. Specication ........................... 17
vii6. Jumper Setting ........................ 196-1. For B68 Motherboard .............................................196-1-1. Motherboard Layout ................................................ 196-1-2. Connectors & Functions .......................................... 206-1-3. Jumper Setting ........................................................ 21
1Item Check List1. Standard Items1-1. ● System ● Manual ● Driver CD● Power Adapter● Power CableTake the system unit out of the carton. Remove the unit from the carton by holding it by the foam inserts. The following contents will be found:
2 Item Descriptiona Camerab TV Key Pad (Power, Volume and Channel button)c * MSR Slotd * HandsetSystem View2. Item Descriptione Ventilationf VESA Holesg Rear I/O (USBx2, DC-IN, RJ48, LAN Connector)h * Handset cradlei * MSR Slotj SpeakerabcdefghijFront View2-1. Rear View2-2.
3I/O Ports View2-3. Item Descriptiona USB x2b SCSI Coonectorc USB x 1d Phone Jack (RJ11)e Audio Line-outf Audio MIC-ing Built-in MICh Smart Card Reader Sloti * 2D Scannera b c de f ghiNote: External equipment intended for connection to singnal input / output or other connectors, shall comply with relevant UL standards (e.g. UL 60950-1 for IT equipment and UL 60601-1 / IEC 60601-1 series for medical electrical equipment).)Items with * asterisk mark can be added on when requested.
4Item Description NumberChipset Driver 3-2VGA Drivers 3-3Audio Drivers 3-4LAN Drivers 3-5POS Touch Drivers 3-6B98 v1.1 Driver ListDriver Installation3. Driver List3-1.
5Driver List3-1. Chipset Driver Installation3-2. a. Click “Chipset” in the Driver List menu of K938S B98. After entering chipset menu, double click to run <innst911_autol.exe>. b. File are extracting. c. Click the <Next> button on the Welcome window. d. Click <Yes> button to accept the License Agreement. e. Click <Next> button. f. Click <Finish> button to complete the Setup.
6VGA Driver Installation3-3. a. Click <Win2K, XP> of “VGA” section in the Driver List menu. b. Double click <win2k_xp14323> to run. c. Click <Next> button to run the InstallShield Wizard. d. Files are extracting. e. Click <Next> button to the Setup menu. f. Click <Yes> button to accept the License Agreement.The VGA drivers can be found in the attached driver CD. In this case "Win2K, XP" is used as an example. The procedure might slightly differ depending on the OS installed.
7 g. Click <Next>. h. Setup program is running. i. Click <Next> to continue.
8Audio Driver Installation3-4. a. Click <Win2K, XP, 2003> of “Audio” section in the Driver List menu. b. Double click <WDM_R185.exe> to run the InstallShield Wizard. c. Files are extracting. d. Click <Next> to start the InstallShield Wizard Setup Program. e. Setup program is running. f. Select <Yes, I want to restart this computer now>, then click <Finish>.The Audio drivers can be found in the attached driver CD. In this case "Win2K, XP" is used as an example. The procedure might slightly differ depending on the OS installed.
9LAN Driver Installation3-5. a. Click <Win9X, ME, 2K, XP> of “PCI-E LAN” section in the Driver List menu. b. Double-click <v686>. c. Double-click <setup.exe> to start installation. d. InstallShield Wizard is preparing the setup. e. S e l e c t a n o p t i o n s f r o m <Modify>, <Repair>, or <Remove> and click <Next>. f. Click <Next>.
10 g. The Setup is running. h. S e l e c t a n o p t i o n i n t h e Hardware Wizard dialog and click <Next>. i. Select <Install the software automatically (Recommended)> and click <Next>. j. < F o u n d N e w H a r d w a r e Wizard> is running. k. Click <Finish> to complete the <Found New Hardware Wizard>. l. Click <Finish>.

Navigation menu