FLYTECH TECHNOLOGY K936C73 Bedside Terminal Hardware System User Manual K936 V1 1 1201
FLYTECH TECHNOLOGY CO., LTD Bedside Terminal Hardware System K936 V1 1 1201
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2466194 |
| Application ID | T1PAOEUgGc27tmjq3dNaOA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 214.49kB (2681093 bits) |
| Date Submitted | 2014-12-08 00:00:00 |
| Date Available | 2014-12-09 00:00:00 |
| Creation Date | 2014-12-03 16:38:25 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2014-12-03 16:38:25 |
| Document Title | Microsoft Word - K936 User Manual V1.1_1201 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | tiffanyhsu |
User Manual Version 1.1 September 2014 Bedside Terminal Hardware System Copyright 2014 All Rights Reserved Manual Version 1.1 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer. TRADEMARK Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Other trademarks mentioned herein are the property of their respective owners. Safety IMPORTANT SAFETY INSTRUCTIONS 1. To disconnect the machine from the electrical Power Supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. 2. Read these instructions carefully. Save these instructions for future reference. 3. Follow all warnings and instructions marked on the product. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. 7. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. 9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 10. To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth.) 11. No modification of this equipment is allowed. CE MARK This device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive” FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation UL This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions. Safety Caution Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related legislation, peripherals shall be 4.7.3.2 "Materials for fire enclosure" compliant. 4.7.3.2 Materials for fire enclosures For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass the test of Clause A.2. For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1 ATTENTION Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LEGISLATION AND WEEE SYMBOL 2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dustbin symbol on the device means that it should not be disposed of with other wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Troubleshooting For your own safety and that of your equipment, always take the following precautions. Disconnect the power plug (by pulling the plug, not the cord), from your computer if any of the following conditions exists: The power cord or plug becomes frayed or otherwise damaged. You spill something into the case. Your computer has been dropped or the case has been otherwise damaged. You suspect that your computer needs service or repair. You want to clean the computer or screen. You want to remove/install any parts. Repair of the device may only be carried out by trained service personnel. We recommend that a service contract be obtained with supplier and that all repairs also be carried out by them. Otherwise the correct functioning of the device may be compromised. Please read the user manual Revision History Revision Date V1.0 June, 2011 V1.1 August, 2014 Description Release Remove C43 motherboard Add C73 motherboard Replace MSR module with 2nd smart IC card reader Table Content 1 Intended Use ...........................................2 2 Item Checklist .........................................3 2-1 Standard Items .................................................................. 3 3 System View ............................................4 3-1 3-2 3-3 3-4 Front View & Side View ...................................................... 4 Rear View ........................................................................... 5 I/O View .............................................................................. 6 Indicator Lights .................................................................. 7 4 Driver Installation ...................................8 4-1 4-2 4-3 4-4 4-5 4-6 Driver List ........................................................................... 8 Chipset Driver Installation................................................. 9 VGA Driver Installation .................................................... 10 Audio Driver Installation .................................................. 13 10/100/1000Mb LAN Driver Installation ...................... 14 POSTouch Driver Installation .......................................... 15 5 System Assembly ................................. 18 5-1 5-2 HDD Replacement ........................................................... 18 Stand Assembly ............................................................... 18 6 Peripheral Installation ......................... 19 6-1 6-2 Phone Set Installation ..................................................... 19 2nd Smart IC Card Reader Installation ........................... 19 7 Specification ........................................ 20 8 Jumper Setting ..................................... 22 8-1 8-2 8-3 C73 Motherboard Layout ................................................ 22 Connectors & Functions .................................................. 23 Jumper Setting................................................................. 25 Appendix: Driver Installation .................. 27 1 Intended Use According to the Instructions for Use (IFU) of the manufacturer, the Bedside Terminal has the following intended use: The Bedside Terminal Hardware System is a computing device capable of storing, retrieving and sending data electronically. This Bedside Terminal Hardware System, including its user interface, battery, PCB and power supply, is intended to be fixed to a stand in medical care environment. This Bedside Terminal Hardware System must be operated by professional personnel. 2 Item Checklist 2-1 Standard Items a. System b. Power adapter (60W) c. Power cable d. Phone module e. Driver CD 3 System View 3-1 Front View & Side View No. Description Build-in camera Build-in microphone Key pad (power, volume button) Smart card reader slot Phone Phone holder 2nd smart card reader dummy cover 3-2 Rear View No. Description Speakers VESA holes x 4 10 2nd smart card reader dummy cover 11 Rear I/O (from right to left: RJ48, USBx2, DC-IN, Display port , LAN) 12 Cable cover 13 HDD door 3-3 I/O View No. Description LAN (RJ45) USB x 2 USB x 1 Phone Jack (RJ11) Audio Line-out Audio Line-in Audio MIC-IN RFID sensor 3-4 Indicator Lights Light LED Color Status Top enclosure light blue ornament light Phone light blue phone rings Symbols on Label and abbreviations on this equipment (from left to right): Power on/off Volume down Volume up Channel down Channel up 4 Driver Installation 4-1 Driver List Folder/File File Description:\ K936_C73.htm Driver List :\COMMON\INTEL\Chipset\i9xx Chipset Driver :\COMMON\INTEL\VGA\GMA3150 VGA Driver :\COMMON\Audio\Realtek_HD_Codec-AEC_enable Audio driver with AEC enable :\COMMON\ POS_Touch POSTouch Driver :\COMMON\Lan_driver\Intel 10/100/1000Mb LAN Driver -The following procedures are for Windows 2000/XP, other platforms are similar. 4-2 Chipset Driver Installation a. Click “Windows” in the Driver List menu of K936 C43 and then doule-click “v9.1.1” b. Double-click “infinsts911_autol.exe” on the My computer window. c. Click the “Next” button on the Welcome window. d. Click the “Yes” button on the License Agreement window. e. Click the ”Next” button on the Readme Information window. f. Click the “Finish” button and restart your system. 4-3 VGA Driver Installation a. Click “WinXP” of “VGA” section in the Driver List menu and then double-click “v14.37.50.4.5260” b. Double-click “winxp.exe” on the My computer window.. c. Click the “Next” button on the Intel(R) Chipset Graphics Driver Software- Install Shield(R) Wizard dialog. 10 d. Click the “Next” button on the Intel(R) Graphics Media Accelerator Driver dialog. e. Click the “Yes” button on the Intel(R) Graphics Media Accelerator Driver dialog. f. Click “Next” button on the Intel(R) Graphics Media Accelerator Driver dialog. g. Click “Next” button on the Intel(R) Graphics Media Accelerator Driver dialog. h. Select “Yes, I want to restart my computer now” and click the “Finish” button on the Intel(R) Graphics Media Accelerator Driver dialog. 11 For WinXP and POSReady 2009 upgrade a. Click “WinXP” of “VGA” section in the Driver List menu. b. Click the “Next” button on the Software Update Installation Wizard dialog. d. Click the “Finish” button on the Software Update Installation Wizard dialog to restart your system. 12 c. Click “I Agree” and click “Next” button on the Software Update Installation Wizard dialog. 4-4 Audio Driver Installation a. Click “Windows” of the “Audio” section in the Driver List menu. b. Double-click R254+AEC” on the My Computer window. c. Double-click “Setup.exe” on the My Computer window. d. Click “Next” button on the Realtek Audio Setup window. e. Click “Finish” button on the Realtek Audio Setup window. 13 4-5 10/100/1000Mb LAN Driver Installation v15.6 a. In the “intel” section, click on “Windows” and click on “Alpha” b. Double-click “v15.6” c. Double-click Setup.exe d. Click the Finish button on the Maintenance Complete window. e. Click the OK button and restart your system. 14 4-6 POSTouch Driver Installation a. In the “Touch Screen auto…” section, click “Windows”. b. Click “Install Touch Driver” on “FT Touch Auto Install V1.0.4.1” window to detect the touch type in your system. c. “FT Touch Auto Install” program will detect what touch type and interface being installed on the system. d. Click ”Next”. e. Select ”I agree…” and click ”Next”. f. Select the installation folder for the touch utility driver and click ”Next”. 15 g. Select the shortcut folder for the touch utility driver and click ”Next”. h. Click ”Next”. i. Click ”Next”. j. The computer is installing the touch driver k. Click ”Continue Anyway” button. l. The serial ports are scanned for a touch device. The Touch panel is on COM5. 16 m. Click ”Finish”. n. Click ”OK” to restart the computer and finish the touch utility installation. o. The computer has restarted. Click on the ”Start” button, select “Programs”, then select ”Touchutility”. p. Select the Device tab. q. Click on the 3 points or the 9 points calibration button. r. Follow the instructions on the screen to do the calibration of the touch panel. Touch anywhere on the screen to save the calibration. 17 5 System Assembly 5-1 HDD Replacement 1. 2. Find the HDD door at the rear right side of the system and loosen the screws(x2). To replace the HDD, push the HDD outwards as picture shown. 5-2 Stand Assembly 1. To install the stand, attached the stand module to the rear of the system and fasten the screws (x4) to secure the stand to the system. 18 6 Peripheral Installation 6-1 Phone Set Installation 1. 2. 3. Loosen the screws(x2) to open the cable cover. Slide the phone module into the phone set holder and connect the phone cable to the connector on the phone module. Connect the other end of the phone cable to the connector on the system. 6-2 2nd Smart IC Card Reader Installation 1. 2. Connect the cable to connector to the on system side. Fasten screws(x2) to secure the module. 19 7 Specification Model K936 Motherboard C73 Processor Intel® Ivy Bridge CPU, BGA, 22nm Celeron 1047UE 1.4G, LLC 2M, 17W Core logic HM76 System memory 2 x DDR3 SO-DIMM slot up to 8GB FSB 1333/1600Mhz Graphic memory DX11, HD Graphics, 350MHz LAN controller / PHY Intel WG82583V / Intel WG82579V Audio controller Realtek ALC 662-GR HD codec I/O controller Winbond W83627UHG Watch dog timer Hardware WDT Cooling Fanless DC-in 12V ~ 48V (wide range) LCD Touch Panel LCD size 15.6" LED LCD Resolution 1366 x 768 Brightness 220 nits Touch screen 5-Wire Resistive Storage Hard drive 1 x 2.5" Slim SATA HDD or SSD Expansion Mini PCI-E 2 x Full size slot(2W each, total 4W) Audio/Light sensor Speaker 2 x 2W Built-in External I/O Line-out Mic-in USB 2.0 USB 3.0 LAN (10/100/1000) 2 x RJ45 Power button Reset button Display port 1 for DVI-D COM 1 x RJ48 20 Model K936 Motherboard C73 Phone jack 1 x RJ11 Power Power adaptor Medical Grade 12V/60W Mechanism Mounting 75x75mm VESA Standard Special material Antibacterial Plastic Housing Peripheral Webcam 2M Pixel Camera & Camera Latch VOIP phone 1 x Handset & Cradle Smart IC card reader RFID 2nd Smart IC card reader Optional Scanner 1 x 2D Optional Scanner Certificate EMC & Safety FCC / CE / EN60601-1-2 / UL60601-1 3rd/ANSI/AAMI ES60601-1 Environment for System Operation temperature 0°C ~ 35°C (32°F ~ 95°F) Storage temperature -20° ~ 60°C (-4°F ~ 140°F) Storage humidity 30% ~ 93% RH Non-condensing Atmospheric pressure range 700 - 1060 hPa Dimension/Weight Dimension 390 x 55 x 297 mm (15.4" x 2.2" x 11.7") Weight 4kgs w/o Handset & Cradle * This specification is subject to change without prior notice. Application: Access to patient records / Hospital administration system / Bed management Manufactory information: Factory: Flytech Technology Co., Ltd. Address: NO.36 Huaya 3rd Rd., Guishan Township, Taoyuan County 33383, Taiwan Tel No: 886-3-272-9688 Fax No: 886-3-272-9666 Note: Cleaning solution-Wipe with cloth using clean water, 2 times a week. Adaptor Manufacturer: FSP TECHNOLOGY INC. Model: PMP60-12-B16 Rating: 100-240V,47-63Hz,1.22-0.68A 21 8 Jumper Setting 8-1 C73 Motherboard Layout 22 8-2 Connectors & Functions Connector Function CN3 USB Port For Web Cam CN4 Speaker & MIC CN5 Cradle CN6 Speaker CN7 Audio Jack (Line out & MIC) CN9 Inverter CN10 Build-In MIC CN14 Membrane CN15 30P All-In-One (Membrane, 2D scanner, RFID, Smart card, Audio Jack) CN18 Audio Jack (Line Out) CN19/JP5 System Indicator CN20 IrDA CN21 LVDS CN22 Power LED CN23 PS/2 Keyboard CN24 MSR CN25 COM1 CN26 System FAN CN27 MIC for AEC CN28 Power Button CN29/30 SATA Power CN31 HDD LED CN32/35 Internal USB CN33 USB Port For DVD Dong CN34 LAN2 LED CN36 Battery CN37 USB Port For RFID CN38 2D Scanner CN39 USB Port For Smart Card CN40 LAN1 LED DP3 DVI PWR3 +19V DC Jack RJ11_3 Handset RJ45_3 RJ45_4 LAN2 LAN1 RJ48_1 COM SATA1/2 SATA USB3 USB3 23 Connector Function JP3 Touch JP4 Inverter Selection JP6 LCD ID Setting JP7 MCU Power Button JP8 Power Mode Setting JP9 MCU Mode Setting JP10 System Reset JP11 CMOS Operation Mode 24 8-3 Jumper Setting Inverter Selection JP4 Function (1-2) (3-4) (5-6) ▲CCFL LED System Indicator JP5 Function (1-2) (3-4) (5-6) (7-8) ▲Disable Enable MCU Power Button JP7 Function (1-2) Disable ▲Enable ▲ = Manufacturer Default Setting Note: OPEN SHORT 25 Power Mode Setting JP8 Function (1-2) ATX Power ▲AT Power MCU Mode Setting JP9 Function (1-2) ▲Normal ISP Debug System Reset JP10 Function (1-2) ▲System Normal System Reset CMOS Operation Mode JP11 Function (1-2) ▲CMOS Normal CMOS Reset 26 Appendix: Driver Installation The shipping package includes a Driver CD. You can find every individual driver and utility that enables you to install the drivers in the Driver CD. Please insert the Driver CD into the drive and double click on the “index.htm” to pick the models. You can refer to the drivers installation guide for each driver in the “Driver/Manual List”. 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : tiffanyhsu Create Date : 2014:12:03 16:38:25+08:00 Modify Date : 2014:12:03 16:38:25+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - K936 User Manual V1.1_1201 Creator : tiffanyhsu Document ID : uuid:9cfe2c38-5675-4cc0-b4de-54a22620aa9b Instance ID : uuid:1549789f-3a9d-4968-99c5-4776169c0fae Page Count : 34EXIF Metadata provided by EXIF.tools