FLYTECH TECHNOLOGY P255D31 Mobile PC User Manual

FLYTECH TECHNOLOGY CO., LTD Mobile PC Users Manual

Users Manual

USER MANUALVERSION 1.0 March, 2016T635MHardware System
iiCopyright 2016All Rights ReservedManual Version 1.0Part Number: The information contained in this document is subject to change without notice.We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer.SafetyIMPORTANT SAFETY INSTRUCTIONS1. To disconnect the machine from the electrical power supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine.2. Read these instructions carefully. Save these instructions for future reference.3. Follow all warnings and instructions marked on the product.4. Do not use this product near water.5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.6. Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register or in a built-in installation unless proper ventilation is provided.7. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.8. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a re or electric shock. Never spill liquid of any kind on the product.CE MARKThis device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”.
iiiFCCFCC Radiation Exposure StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.•Consult the dealer or an experienced radio/TV technician for help.•This device complies with FCC SAR exposure limits set forth for an uncontrolledenvironment.Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC SAR exposure limits set forth for an uncontrolled environment.Safety CautionNote: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related legislation, peripherals shall be 4.7.3.2 “Materials for re enclosure” compliant.4.7.3.2 Materials for re enclosuresFor MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a FIRE ENCLOSURE, in the thinnest signicant wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass the test of Clause A.2.For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1This product should not be mixed with other commercial wastes for disposal.
ivLEGISLATION AND WEEE SYMBOL2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components.The crossed dust bin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household users should contact either the retailer where they purchased this product, or their local government ofce, for details of where and how they can take this item for environmentally safe recycling.Business users should contact their supplier and check the terms and conditions of the purchase contract.
vRevision HistoryChanges to the original user manual are listed below:Revision Description Date1.0 • Initial release March, 2016
viTable of Contents1. Packing List .................................. 11-1. Standard Accessories .....................................................12. System View .................................. 22-1. Touch Panel .....................................................................22-2. Touch Pamel with Printer Stand .....................................32-3. Dimensions ......................................................................42-4. IO Port View .....................................................................53. System Assembly & Disassembly 63-1. Install Touch Panel to Printer Stand...............................63-2. Install the Power Adapter ................................................63-3. Connect iPad Jacket to Printer Stand ............................83-4. Remove Touch Panel from Printer Stand .......................83-5. Load the Thermal Printer Paper ....................................124. Specications .............................. 135. Jumper Settings ........................... 14Appendix: API Information ............... 15
viiThe page is intentionally left blank.
11. Packing List1-1. Standard Accessoriesa. T635M Systemb. Power adapterc. Power cordd. RJ45-DB9 cable (x2)
22. System View2-1. Touch PanelItem No. Description1 Expansion dummy cover2 Camera hole3 Hand strap4 Speaker5 Charging slot6 Expansion dummy cover1 23456
32-2. Touch Pamel with Printer StandItem No. Description1 Touch panel2 Lock button of printer stand3 Thermal printer4 Release button5 Printer indicator (power, error, and paper) & Paper feed button6 USB7System box(IO board and thermal printer inside)1243567
42-3. Dimensions164 mm28 mm338 mm261 mm188.9 mm261 mm24 mm
52-4. IO Port ViewItem No. Descriptiona Cash drawerb COM2/COM1c DC 19V ind Micro USBe USB 2.0f LED(power)g LED(paring)h Paring buttonabcdefgh
63. System Assembly & Disassembly3-1. Install Touch Panel to Printer Stand1. Directly put the touch panel into thecradle of printer stand.3-2. Install the Power Adapter1. Use both hands to pull the cover of the system box upward to release thecover from the system box.
72. Place the system face down to access the bottom of the stand. 3. Thread the power adapter cable through the hole of the stand as shown in the picture.4. Find the power connector on the right of the I/O panel (refer to chapter 2-4 c.) and connect the power adapter to the DC-IN connector. 5. Finally arrange and x the cable by using the hook as shown in the picture. Warning:• Please follow the direction to plug the adapter and make sure it is fully connected into the I/O port.• When attaching or detaching the cable, do so by holding the connector, not the cable itself.• DO NOT pull or rotate the cable which may cause damage to the tting.
83-3. Connect iPad Jacket to Printer Stand1. After the power adapter is installed, remember to push the paring button on the IO port so that the touch panel and the printer stand will be connected.3-4. Remove Touch Panel from Printer Stand1. Push the release button on the printer stand and then pull the touch panel upward to release it from the printer stand.* Please note you can remove the touch panel from the printer stand only on the condition that the switch panel on the printer stand shows "unlock". See the enlarged part in the picture.
91. Open the cover of the system box.2. You will nd the key on the top of the printer.When the switch panel on the printer stand shows “Lock“, you can not push the release button to remove the iPad Jacket. Use the provided key or APP to unlock printer stand. Please follow the below steps:3. Insert the key and then pull the touch panel upward to release it from the printer stand.• Manually unlock
101. Use the Touch ID to login the APP program.2. Enter password to login the APP program if the device is not equipped with the fingerprint sensor. Default password:1234.3. Click "BLE Cong".• APP unlock (demo APP)
114. Click the device to connect.5. The BLE is now connected, then click "DOCK"5. Use the Touch ID or enter the password to login again.6. Now the device is unlock, push the lock button to release the iPad Jacket from the printer stand.
123-5. Load the Thermal Printer PaperNote: Do not switch off the system. The printer must be powered on when replacing the printer paper.1. Press the button at the right side toopen the thermal printer module.*Cut away the first five (5) cm ofthe paper, to obtain a straightedge and remove the label at theend of the roll.2. Place the paper roll inside theprinter slot, pull out a 2 or 3 cmlength and then close the cover.3. The paper will feed automaticallythrough the printer (the systemmust be powered on).
134. SpecicationsModel T635MCPU support Baytrail - T CR Z3735FSystem memory 2G / 32G / Windows (TBD)1G / 16G / Android (TBD)LCD touch panelLCD size 10.1Maximal resolution 1280 x 800Touch screen type P-CAP 5 points Multi-touchWireless communicationWireless LAN 802.11 a/b/g/n , 2.4G / 5GHz Bluetooth 4.0+LE (Class 2, 10 meters)Cellular Network 3G/LTE (Option)NFC NFC reader I2C MSN09 40x50 W/NXP NPC100 antenna module (SM-MSN09-C03) smart apprExpansion I/O portsDC input 8 pad AudioBuilt in speaker 1W x 2Battery & PowerBattery 4100 mAh, 3.7V, 15.1 Wh, Battery life 4hr Power adapter 90W/19VControl / IndicatorPower button 1Sensor G-sensorLED Indicator 1 (Battery status indicator)PeripheralsRear Camera 5MPBuilt- in hand strap 1EMV certied module MSR/ smart card reader combo module (Option)Docking StationI/O board USB I/O Board ,BT I/O Board , 4 COM I/O BoardEnvironmentSealing IP54 (Display side)EMC & Safety FCC Class B / CE Mark / LVD / SAROperating temperature 0°C ~ 35°C (32°F ~ 95°F)(charging mode)0°C ~ 40°C (32°F ~ 104°F)(none charging mode)Storage temperature -10°C ~ 45°C (14°F ~ 114°F)Humidity 20% ~ 85% RH non condensingESD Tablet: 8kV Contact discahrge, 15kV Air dischargeDocking station: 4kV Contact discahrge, 8kV Air dischargeDimension (W x D x H) 261 x 169 x 24.0mm (10.3” x 6.7” x 0.94”)Weight (N.W./G.W.)OS support Window 8.1 with Bing / Windows 8.1 Industry Pro / Android 4.4.4* This specication is subject to change without prior notice.
145. Jumper Settings21 34Cash Drawer Power Setting Function JP2 +12V ▲+24V COM Power Setting Function JP3▲+0V +5V +12V▲ = Manufacturer Default Setting 21 Jumper open 21 Jumper short21 3421 3421 3421 34
15Appendix: API InformationPlease contact your service provider for more detailed informaiton on software porting guide.

Navigation menu