FLYTECH TECHNOLOGY PB55D31L Swing User Manual Revision v1
FLYTECH TECHNOLOGY CO., LTD Swing Revision v1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3459038 |
| Application ID | 2rdxY/IVu8/inc0KhXqSfA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.22kB (577725 bits) |
| Date Submitted | 2017-07-11 00:00:00 |
| Date Available | 2018-01-08 00:00:00 |
| Creation Date | 2017-03-20 04:14:18 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2017-03-20 04:14:18 |
| Document Title | Revision v1 |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | berylchen |
User Manual Version 1.0 March 2017 SWING Mobile PC Copyright Copyright 2017 All Rights Reserved Manual Version 1.0 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer. TRADEMARK The material in this manual is subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft® , Windows® and ActiveSync® are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. ii Safety Regulatory Information Caution: Only use approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Power Supply Use only the approved power supply 50-14000-148 output rated 5 Vdc and minimum 2 A. The power supply is certified to EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Warning for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers Persons with Pacemakers should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON and hence they should not carry the device in a breast pocket . Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. iii Hearing Aids The wireless device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. FCC/EU RF Exposure Guidelines FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC SAR exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void t he user's authority to operate the equipment. iv CE Marking and European Economic Area The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions: Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz France, outside usage is restricted to 2.4 - 2.454 GHz. Italy requires a user license for outside usage. Bluetooth® Wireless Technology for use through the EEA has the following restrictions: Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz France, outside usage is restricted to 10mW EIRP Italy requires a user license for outside usage. Battery Information Our rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, they should be charged and discharged at least once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of the battery. Batteries must be charged within the 32° to 95° F (0° to +35° C) ambient temperature range. Replace the battery when a significant loss of run time is detected. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to the reseller for recycling. Notational Conventions The following conventions are used in this document: Italics are used to highlight specific items in the general text, and to identify chapters and sections in this and related documents. bullets (•) indicate: action items lists of alternatives lists of required steps that are not necessarily sequential Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note will not result in physical harm to the reader, equipment or data. CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may occur. WARNING! This symbol indicates that if this information is ignored the possibility that serious personal injury may occur. vi Revision History Version Date 1.0 November 2017 Description Initial release vii Table of Contents Introduction ................................................ 9 1-1 1-2 1-1-1 Front View .................................................................................... 9 1-1-2 Rear View .................................................................................. 10 Specification ..................................................................................... 11 1-2-1 Touch Panel ...............................................................................11 1-2-2 Docking Station- Wall Mount ....................................................13 1-2-3 Docking Station- Pole Mount ....................................................13 1-2-4 Docking Station- Hinge Type I/O Box .......................................13 1-2-5 Docking Station- Light version I/O Box .................................... 14 1-2-6 Docking Station- Charging Cradle ............................................ 14 Getting Started ......................................... 15 2-1 2-2 2-3 viii System Overview ................................................................................ 9 Power On/Off the System ................................................................ 15 Replacing the Battery....................................................................... 16 Using the Docking Station ............................................................... 17 2-3-1 Wall Mount ................................................................................ 17 2-3-2 Pole Mount ................................................................................18 1 Introduction 1-1 System Overview 1-1-1 Front View No. Description Front Camera Power LED light indicator Ambient light sensor Home key with Aures logo 1-1-2 Rear View 11 10 10 No. Description Rear Camera POGO metal ring Hand strap Scanner Power button 10 Arm Stand 11 Battery 1-2 Specification 1-2-1 Touch Panel System PB55 Motherboard D31L CPU System memory Flash memory BayTrail - T CR Z3735F 1.33 ~1.83 Ghz quad - core 2GB DDR3 32GB /64GB eMMC (32GB default ) LCD Touch Panel LCD size 10.1" TFT LED Panel Brightness 350nits Resolution 1920 x 1200 Touch screen P-CAP Multi-touch Wireless Networking Wireless LAN 802.11 a/b/g/n, 2.4G/5GHz Bluetooth 4.0+LE, Class 2 NFC/RFID Option ( USB, consigned parts ) 3D/SD memory slot One combo slot built-in (3G and SD memory card option) Audio Speaker 1 x 1W Speaker Control / Indicator Power Button Scanner button Sensor G-sensor, Ambient Light Sensor Vibrator Built-in vibrator motor LED Indicator 1 (Battery status indicator) *1 Home key logo Built-in touch screen Peripherals Front Camera 2MP Rear Camera 5MP MSR Hand strap Scanner Hidden connection point for USB MSR or others (option) USB 2D scanner (option) Cradle USB Port Power Adapter mini-USB 2.0 x 1 10W / 5V Battery & Power Battery 8000mAh Hot –Swap, Internal backup 1100mAh Certificate EMC & Safety FCC & CE Mark Class B / LVD / SAR for Tablet FCC & CE Class A/ LVD for Docking Station 11 System PB55 Motherboard D31L Environment Operating Temperature 0°C ~ 35°C (32 °F ~ +95 °F) Storage (runningTemperature charging mode) -10°C ~ 45°C (14°F ~ 114°F) Operating Humidity 20% - 80% RH non-condensing Storage Humidity 20% - 80% RH non-condensing Size Dimension(W x D x H) 262.3 x 170.3 x 17.3mm Weight OS Support *1. (8.0'' x1085 5.0'' gx 1.3'') Windows IoT 10 Enterprise (32bit) / Android 4.4.4 (64-bit ) Tablet LED indicator: Green light-Full charged / Orange light- Charging / Red flash light- Low battery / Red light- Critical low battery. 12 1-2-2 Docking Station- Wall Mount Docking Station Lock /Unlock mechanism Wall Mount 1. The POGO connector Lock and Unlock between tablet and docking station controlled by software 2. Unlock when cradle without power :By cross - shape screwdriver 3. Unlock when cradlePH00 with power : By tool access hardware switch for gear access Charging I/O USB 2.0 DC IN 1 ( lock connector ) Charging adapter 65W (DC19V /3.42A) Color Black, White Certificate FCC /CE Class A, LVD 1-2-3 Docking Station- Pole Mount Docking Station Lock /Unlock mechanism 1. Pole Mount The POGO connector Lock and Unlock between tablet and docking station controlled by software 2. Unlock when cradle without power :By cross - shape screwdriver 3. Unlock when cradlePH00 with power : By tool access hardware switch for gear access Charging I/O USB 2.0 DC IN 1 ( lock connector ) Charging adapter 65W (DC19V /3.42A) Color Black, White Certificate FCC /CE Class A, LVD 1-2-4 Docking Station- Hinge Type I/O Box Docking Station Lock /Unlock mechanism 1. Hinge Type I/O Box The POGO connector Lock and Unlock between tablet and docking station controlled by software 2. Unlock when cradle without power :By cross - shape screwdriver 3. Unlock when cradlePH00 with power : By tool access hardware switch for gear access Charging I/O Serial USB 2.0 Cash Drawer LAN DC IN Charging adapter Connection mode with tablet Color Certificate RS-232 x2 (RJ45 type, with 5V/0V by jumper ) 4 ( I/O port ) / 1 ( side I/O ) 1 (19V ) 1 (10/100Base–T) 1 (lock type ) 1 ( 65W, DC19V/3.42A ) USB mode and USB roaming mode (By jumper switch ) Black, White FCC /CE Class A, LVD 13 1-2-5 Docking Station- Light version I/O Box Docking Station Light version I/O Box NA Lock /Unlock mechanism Charging I/O Serial RS-232 x2 (RJ45 type, with 5V/0V by jumper ) USB 2.0 4 ( I/O port ) / 1 ( side I/O ) Cash Drawer 1 (19V ) LAN 1 (10/100Base–T) DC IN 1 (lock type ) Charging adapter Connection mode with tablet 1 ( 65W, DC19V/3.42A ) USB mode and USB roaming mode (By jumper switch ) Color Certificate Black, White FCC /CE Class A, LVD 1-2-6 Docking Station- Charging Cradle Charging Cradle DC IN Charging adapter Color Certificate 14 1 (lock type ) 1 ( 65W, 19V/3.42A ) Black FCC /CE Class A, LVD 2 Getting Started 2-1 Power On/Off the System 1. Push the power button to turn on the system and hold 4~5 seconds to turn off the system. Note: For best touch performance, remove the protective plastic overlay from the LCD screen by peeling it away from one of the corners. Be sure to use a soft pointing device or finger tip to avoid scratching the screen during normal use. 15 2-2 16 Replacing the Battery 1. Place the touch panel face down. Making sure not to scratch the screen. 2. 3. 4. Pull the arm stand upwards. Unlock the battery switch. Finally slide the battery module out. 2-3 Using the Docking Station 2-3-1 Wall Mount 1. Secure the wall mount to the wall by fastening screws (x4). 2. After the wall mount is fixed, align the touch panel on the wall mount. Note: The POGO connector Lock and Unlock between tablet and docking station controlled by software. Unlock when cradle without power :By cross - shape screwdriver. Unlock when cradle with power : By tool access hardware switch. 17 2-3-2 1. Pole Mount Secure the pole mount on the desk by fastening screws (x4). 2. Directly align the touch panel on the pole mount. Note: 18 The POGO connector Lock and Unlock between tablet and docking station controlled by software. Unlock when cradle without power :By cross - shape screwdriver. Unlock when cradle with power : By tool access hardware switch.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 18 Language : zh-TW Tagged PDF : Yes Title : Revision v1 Author : berylchen Creator : Microsoft® Office Word 2007 Create Date : 2017:03:20 04:14:18 Modify Date : 2017:03:20 04:14:18 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools