FLYTECH TECHNOLOGY T605000 Payment Terminal User Manual Revised

Download:
Mirror Download [FCC.gov]
Document ID	2877122
Application ID	YcIlOeJPVwRrP+hQ3oQmvg==
Document Description	Users Manual Revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	343.75kB (4296901 bits)
Date Submitted	2016-01-19 00:00:00
Date Available	2016-01-19 00:00:00
Creation Date	2016-01-13 15:28:59
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2016-01-19 15:04:29
Document Title	Users Manual Revised
Document Creator	Adobe InDesign CS6 (Windows)

USER MANUAL
VERSION 1.0
November, 2015
T605
Hardware System
Copyright 2015
All Rights Reserved
Manual Version 1.0
Part Number:
The information contained in this document is subject to change without notice.
We make no warranty of any kind with regard to this material, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose.
We shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced or translated
to another language without the prior written consent of the manufacturer.
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. To disconnect the machine from the electrical power supply, turn off the power switch
and remove the power cord plug from the wall socket. The wall socket must be easily
accessible and in close proximity to the machine.
2. Read these instructions carefully. Save these instructions for future reference.
3. Follow all warnings and instructions marked on the product.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This product should
never be placed near or over a radiator or heat register or in a built-in installation
unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the marking label.
If you are not sure of the type of power available, consult your dealer or local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
9. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
CE MARK
This device complies with the requirements of the EEC directive 2004/108/EC with
regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”.
ii
FCC
FCC Radiation Exposure Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. -Consult the dealer or an experienced radio/TV technician for help.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Safety Caution
Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S)
related legislation, peripherals shall be 4.7.3.2 “Materials for fire enclosure”
compliant.
4.7.3.2 Materials for fire enclosures
For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a
FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of V-1 CLASS
MATERIAL or shall pass the test of Clause A.2.
For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all
STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest
significant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test
of Clause A.1 This product should not be mixed with other commercial wastes for
disposal.
iii
LEGISLATION AND WEEE SYMBOL
2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment,
collection, recycling and disposal of electric and electronic devices and their
components.
The crossed dust bin symbol on the device means that it should not be disposed of
with other household wastes at the end of its working life. Instead, the device should
be taken to the waste collection centers for activation of the treatment, collection,
recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
iv
Revision History
Changes to the original user manual are listed below:
Revision
1.0
• Initial release
Description
Date
November, 2015
Table of Contents
1. Packing List................................... 1
1-1. Standard Accessories......................................................1
2. System View................................... 2
2-1.
2-2.
2-3.
2-4.
iPad Jacket.......................................................................2
iPad Jacket with Printer Stand........................................3
Dimensions.......................................................................4
IO Port View......................................................................5
3. System Assembly & Disassembly.6
3-1.
3-2.
3-3.
3-4.
3-5.
3-6.
Install the iPad Jacket......................................................6
Install iPad Jacket to Printer Stand.................................7
Install the Power Adapter.................................................7
Connect iPad Jacket to Printer Stand.............................9
Remove iPad Jacket from Printer Stand.........................9
Load the Thermal Printer Paper.....................................13
4. Specifications............................... 14
5. Jumper Settings............................ 15
Appendix: API Information................ 16
vi
The page is intentionally left blank.
vii
1.
1-1.
Packing List
Standard Accessories
a.
b.
c.
d.
T605 System
Power adapter
Power cord
RJ45-DB9 cable (x2)
2.
2-1.
System View
iPad Jacket
Item No.
Description
Expansion dummy cover
Camera hole
Speaker
Hand strap
Charging slot
screw holes (x4)
2-2.
iPad Jacket with Printer Stand
Item No.
Description
iPad Air 2 (not included)
iPad Jacket
Lock button of printer stand
Thermal printer
Release button
Printer indicator (power, error, and paper) & Paper feed button
System box
(IO board and thermal printer inside)
Dimensions
175 mm
280 mm
15 mm
280 mm
350 mm
2-3.
188.9 mm
2-4.
IO Port View
Item No.
f g h
Description
Cash drawer
COM2/COM1
DC 19V in
Micro USB
USB 2.0
LED(power)
LED(paring)
Paring button
3.
3-1.
System Assembly & Disassembly
Install the iPad Jacket
1. Open the top cover of iPad Jacket.
2. Align and place the iPad into the
protective case.
3. Close the top cover of iPad Jacket.
4. Turn to the rear side of iPad Jacket and
then fasten the screws(x4). Make sure
the top cover and bottom shell are
fasten closed.
5. Finally put the rubber pads(x4) on the
screw holes.
3-2.
Install iPad Jacket to Printer Stand
1. Directly put the iPad Jacket into the cradle
of printer stand.
3-3.
Install the Power Adapter
The system is equipped with a 90W power adapter. Please plug it into the system as
shown below.
1. Use both hands to pull the cover of the system box upward to release the
cover from the system box.
2. Place the system face down to access the bottom of the stand.
3. Thread the power adapter cable through the hole of the stand as shown in the picture.
4. Find the power connector on the right of the I/O panel (refer to chapter 2-4 c.) and
connect the power adapter to the DC-IN connector.
5. Finally arrange and fix the cable by using the hook as shown in the picture.
Warning:
• Please follow the direction to plug the adapter and make sure it is fully connected
into the I/O port.
• When attaching or detaching the cable, do so by holding the connector, not the
cable itself.
• DO NOT pull or rotate the cable which may cause damage to the fitting.
When the switch panel on the printer stand shows “Lock“, you can not push the
release button to remove the iPad Jacket. Use the provided key or APP to unlock
printer stand. Please follow the below steps:
• Manually unlock
1. Open the cover of the system box.
2. You will find the key on the top of the printer.
3. Insert the key and then pull the iPad
Jacket upward to release it from the
printer stand.
3-4.
Connect iPad Jacket to Printer Stand
1. After the power adapter is installed,
remember to push the paring button
on the IO port so that the iPad Jacket
and the printer stand will be connected.
3-5.
Remove iPad Jacket from Printer Stand
1. Push the release button on the
printer stand and then pull the iPad
Jacket upward to release it from the
printer stand.
* Please note you can remove iPad
Jacket from the printer stand only on the
condition that the switch panel on the
printer stand shows "unlock". See the
enlarged part in the picture.
10
• APP unlock (demo APP)
1. Use the Touch ID to login the APP
program.
2. Enter password to login the APP
program if the device is not equipped
with the fingerprint sensor. Default
password:1234.
3. Click "BLE Config".
11
4. Click the device to connect.
5. The BLE is now connected, then click
"DOCK"
5 . U s e t h e To u c h I D o r e n te r t h e
password to login again.
6. Now the device is unlock, push the
lock button to release the iPad Jacket
from the printer stand.
12
3-6.
Load the Thermal Printer Paper
Note: Do not switch off the system. The printer must be powered on when
replacing the printer paper.
1. Press the button at the right side to
open the thermal printer module.
Cut away the first five (5) cm of
the paper, to obtain a straight
edge and remove the label at the
end of the roll.
2. Place the paper roll inside the
printer slot, pull out a 2 or 3 cm
length and then close the cover.
3. The paper will feed automatically
through the printer (the system
must be powered on).
13
4.
Specifications
Model
Jacket
External I/O ports(via Bluetooth)
USB
COM
Cash drawer
DC jack
LED indicator
Bluetooth paring button
Power
Power adapter
Control/Indicator
Printer feed button
Printer indicator
Peripheral
Built in printer
(via Bluetooth )
T605
iPad Air 2
1 x micro USB
1 x USB Type-A for device charging
2 x RJ-48 COM port
(0V/ 5V/12V selection by jumper setting, default 0V)
1 x RJ-11
(12V/24V selection by jumper setting, default 24V)
4 pin w/lock
2 (Pairing, Power)
19V / 90W
Paper width 80mm, 170 mm/sec, Auto cutter, Paper drop change, Out of
paper sensor, paper roll dia. 80mm
3” 170 mm/sec, Auto cutter, Paper drop change, Out of paper sensor, Paper
roll dia. 80mm
Environment
EMC & Safety
FCC, Class B, CE, LVD
ESD
4kV contact discharge, 8kV air discharge
Operating Temperature
0°C ~ 35°C (32°F ~ 95°F)
Storage Temperature
-20°C ~ 60°C (-4°F ~ 140°F)
Humidity
20% ~ 85% RH non condensing
Dimension (WxDxH)
LCD 90° tilt angle: 255 x 224 x 256 mm (10.1” x 8.8” x 10.0”)
Weight (N.W./G.W.)
3.2kg (7.1 lbs) / 4.7kg (9.3 lbs)
* This specification is subject to change without prior notice.
14
5.
Jumper Settings
Cash Drawer Power Setting
Function
JP2
+12V
1 3
2 4
▲+24V
1 3
2 4
COM Power Setting
Function
JP3
▲+0V
1 3
2 4
+5V
1 3
2 4
+12V
1 3
2 4
▲ = Manufacturer Default Setting
15
Jumper open
Jumper short
Appendix: API Information
Please contact your service provider for more detailed informaiton on software
porting guide.
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2016:01:13 15:28:59+08:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2016:01:19 15:04:29+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:8f92c317-8a28-4064-a3c6-5c4857f24ac1
Original Document ID            : adobe:docid:indd:bf9f6e85-f202-11e3-a9c3-bc41a6356ad9
Document ID                     : xmp.id:B7DAA354C2B9E511A2BF8A5B842DD4A9
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:62063DCF1E9EE5118F48FBA315BAB95D
Derived From Document ID        : adobe:docid:indd:bf9f6e85-f202-11e3-a9c3-bc41a6356ad9
Derived From Original Document ID: adobe:docid:indd:bf9f6e85-f202-11e3-a9c3-bc41a6356ad9
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:01:13 15:28:59+08:00
Metadata Date                   : 2016:01:19 15:04:29+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 23

EXIF Metadata provided by EXIF.tools