FORTUNE POWER ELEC TECH ANJ-361 Wireless Game Pad User Manual

FORTUNE POWER ELEC. TECH. CO., LTD Wireless Game Pad

User Manual

ButtonSpecication / FeaturesSELECT STARTL1 R1INPUT BOTTONSBACKRIGHT STICKSTOUCH PANELLED INDICATORSHOMEPLAY/PAUSELEFT STICKSMENUREWIND FORWARDD-PADSupports dierent device for Set Box TV, Tablet, smart phones running by Android version 3.2 and up, PC Standard Bluetooth HID data transmission, No require the PIN code when pair with the deviceDual Analog Mini Sticks with 8 way Direction Pad 2 Shoulder and 2 Trigger buttons3 Media key, 3 system buttons and A / B / X / Y input buttonsBuilt-in rechargeable battery (380mAH), chargeable via Micro USB port4 LED light indicators for charging , working and function mode connectionSupport mode change after pair with deviceA special TOUCH panel design easy to control and support more of the touch or mouse games POWER/MODE CHANGEL2 RESETUSB(MICRO B) PORTR2Pairing your gamepad with your BT deviceMake sure that your connect device is powered on. Press and hold the POWER / MODE buttons around 6 seconds until the LED Indicator on the bottom of gamepad blinks slowly , then release the button. Press the POWER / MODE buttons again around 3 seconds the LED should be blinking fast to pair the device. Now activate Bluetooth on your device and search available Bluetooth devices. Select the [Game Controller] to pair your device with your controller. As soon as the LED on the controller stops blinking and stays lit, the connection had been established. The rst entry mode will follow the previous mode and indicator.Pairing your gamepad through the dongle for comuterMake sure that your dongle is connect via the USB port of computer and open the Bluetooth device. Press and hold the POWER / MODE buttons around 6 seconds as above operated way start to pair the device. Select and add a Bluetooth device. Wait a few moments as your device searching for nearby discoverable controllers. You will see “ Bluetooth HID” appear when open the Game Controllers panel.The representing the various operating modes with action buttons are indicator overview on sheet. Press and hold the button corresponding to the mode which to congure plus the POWER / MODE button for approx. Three seconds, until the correspond-ing LED on the controller begins to blink rapidly.Mark :IF you pair your controller with a tablet, smart phone, STB or PC, you can turn your controller o and on again without having to go through the pairing process again, as long as you haven’t used the controller with another device in the meantime. The controller will return to the last operating mode when it starts back up. IF you pair the controller with another device in the meantime, though, you will have to go through the pairing process again. When the controller is pairing with an already known device, the LEDs will ash slowly. If it does not nd the device it was paired with, it will automatically turn o. The controller will only pair to a new device when the LEDs are ashing rapidly.IF there request a password to pair between the Bluetooth device and gamepad. Please input the “0000” for less than 2.0 versionsMode for ControllerGamepad mode :The gamepad oers two dierent operating modes as well as a variation of the game controller mode. You can push the POWER / MODE button to change between the GAMEPAD and Mouse / Keyboard (Touch pad) mode after pair the device and based on the dierent game type to set up for operation. Mouse / Keyboard (Touch pad) mode :As a standard mouse to operated for PC USB device ; and allows you to operated touch-screen-controlled Android applications and games as mouse on android. The two shoulder buttons represent the left and right mouse buttons, respectively.A standard HID gamepad with two analog sticks and 8 way D-pad. As normally 4 axes 12 / 16 buttons with POV function game-pad on PC ; for Android support 3.2 version or above used for all android platform incl. STB, smart phone or tablet. A Analog Triggers (L2, R2) mode support some of special android games as google pad’s games on android market ANJ-361 USER Manual
Overview of operation modes and LED indicatorDevice Mode Setting / Switch LED IndicatorAndroidAmazon Fire TVGamepad L2,R2 Digital POWER / MODE + A buttonPOWER / MODE + Y buttonPOWER / MODE + B buttonPOWER / MODE + X buttonPOWER / MODE + B button□■□□Gamepad L2,R2 Analog □■■□Mouse (Touch Pad)Keyboard □□■□PC USBGamepad □□□■Mouse (Touch Pad)Keyboard □□■□Charging indicator ■□□□Button MappingDevice AmazonModeButton Gamepad PC USBAndroidGamepad mode Gamepad mode Mouse( TOUCH pad) / KB modeMouse( TOUCH pad) / KB modeD-pad UPD-pad DownD-pad LeftD-pad RightLeft Analog UPLeft Analog DownLeft Analog LeftLeft Analog RightRight Analog UPRight Analog DownRight Analog LeftRight Analog RightUPDOWNLEFTRIGHTY AxisY AxisX AxisX AxisZ Rotate AxisZ Rotate AxisZ AxisZ AxisUPDOWNLEFTRIGHTY AxisY AxisX AxisX AxisZ Rotate AxisZ Rotate AxisZ AxisZ AxisUPDOWNLEFTRIGHTUPDOWNLEFTRIGHT----POV UPPOV DOWNPOV LEFTPOV RIGHTY AxisY AxisX AxisX AxisZ Rotate AxisZ Rotate AxisZ AxisZ AxisUPDOWNLEFTRIGHTUPDOWNLEFTRIGHT----Touch pad up / downTouch pad left / rightButton AButton BButton XButton YL1R1L2R2Left Ananlog / L3(push) Right Ananlog / R3(push) --ABXYL1R1L2R2THUMBRTHUMBR--ABXYL1R1L2R2THUMBRTHUMBRMouse UP / DOWNnavigationMouse LEFT / RIGHTnavigationJKMIMouse_Left_KeyMouse_Right_KeyXZOL--Button 1Button 2Button 3Button 4Button 5Button 6Button 7Button 8Button 11Button 12Mouse UP / DOWNnavigationMouse LEFT / RIGHTnavigationJKMIMouse_Left_KeyMouse_Right_KeyXZOLButton SelectButton StartSystem buttonsMedia control buttonsButton RESETButton POWER / MODE--HOMEBACKMENUREWIND : PreviousFORWARD : NextPLAY / PAUSERESETMode change and Power ON / OFFSELECTSTARTRYButton 9Button 10go th IEback page on IE----RYWhen the battery is low, the LED will blink slowly. Connect the controller to a standard, active USB micro B port (PC, charger for your tablet or smart phone, etc.). While the controller is charging, LED will be illuminated. Once the battery is fully charged, LED will shut o.The controller will turn itself o when the battery charge is too low for normal use. When the controller is not paired with a device, it shuts-o automatically if it is inactive for one minutes. IF the controller is paired with a device, it will shut-o after ve minutes of inactivity in order to conserve power for sleep mode.Charging your Controller and Sleep modeMany games that support external controllers require “button mapping”, which means that you have to setting between the action buttons on the controller with the game. Check the settings and/or options menu of your game to see if this is the case.Mark :1. Controller doesn’t work with [game].Is it possible that you tried to change the operating mode of your controller without un-pairing and re-pairing it with your tablet/smart phone? As described in the “Pairing the controller with your Android tablet or smart phone” section, it is only possible to change the mode if you un-pair the controller and then pair it again with the new mode selected. This is a limitation of the Bluetooth technology and not something that we can avoid.2. Controller is not recognized and does not work, even though it is active and paired.Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

Navigation menu