FORYOU MULTIMEDIA ELECTRONICS NS-PR200 Pico Projector with Premium Audio User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3574817
Application ID	druuDeMBW92h+ExQMZCmFA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	129.29kB (1616130 bits)
Date Submitted	2017-09-22 00:00:00
Date Available	2018-03-22 00:00:00
Creation Date	2017-09-20 11:04:36
Producing Software	Adobe PDF library 9.90
Document Lastmod	2017-09-20 11:51:17
Document Title	127075007529 微投MP-331说明书贴纸
Document Creator	Adobe Illustrator CS5
Document Author:	gippe

Flat size (W×H): 480 × 240 cm
Final folded size: 120 × 120 cm
NS-PR200_17-0460_QSG_V1_EN.ai 1 9/11/2017 8:20:35 AM
CONNECTING YOUR PROJECTOR
Left
7 Press Keystone+ or Keystone –to correct the distortion during a tilted
projection.
Apple® iOS Devices
Lightning® digital AV adapter
(not included)
QUICK SETUP GUIDE
Pico Projector
Charging portHDMI port
Headphone
jack
OR
8 When you are done using the projector, press and hold
Right
NS-PR200
HDMI cable
30-pin digital AV adapter
(not included)
USING YOUR BLUETOOTH SPEAKER
PACKAGE CONTENTS
•
•
•
•
•
•
(power) for two
Pico projector
Mini/Micro HDMI adapter
HDMI cable
AC power adapter
Soft carrying pouch
Quick Setup Guide
HDMI
Focus dial
OPTIONAL
Connect if your device has a
mini or micro HDMI port.
CHARGING YOUR PROJECTOR
Note : Use only the included AC power adapter.
Plug the AC power adapter into a power outlet, then plug the 12V DC output end
into the projector. The charging indicator lights red while charging, and it turns
COMPATIBILITY
Works with HDMI-compatible Android devices and devices with micro, mini, or
standard HDMI outputs (up to 1080p). An Apple digital AV adapter is needed for
Apple iOS devices (sold separately).
HDMI cable
Mini/Micro HDMI adapter
Bluetooth speaker.
For best sound performance, keep your Bluetooth device no farther than
33 ft. (10 m) from your projector.
1 Turn on your source device, then press and hold (Bluetooth) for two seconds
to turn on Bluetooth pairing mode. The Bluetooth indicator blinks.
2 Turn on your device’s Bluetooth, then pair your device with “NS-PR200.” When
pairing is completed, the Bluetooth indicator stays on and the projector beeps
twice.
3 Begin playing audio on your Bluetooth device. It should play through the
speakers on your projector.
Notes:
FEATURES
USING YOUR PROJECTOR
•
•
•
•
Tip: For the best picture, use the projector in a dark room or with a small picture
in a brighter room.
1 Connect your video source device to your projector. See “CONNECTING YOUR
PROJECTOR” above for instructions.
100 lumen output with long-life LEDs
Projects images up to 100 in. (254 cm) (16:9 aspect ratio)
Accepts up to 1080p video signals for maximum compatibility
Internal battery with 120 minutes of run time (normal brightness at 50% volume
level—will vary depending on use)
speakers
To check your battery level, refer to the table below:
• Can be used as an audio-only Bluetooth speaker
• 3.5 mm stereo audio output for use with headphones or external audio devices
CHARGING INDICATORBATTERY STATUS
Green
80-100%
Top
Yellow
31-79%
Red
0-30%
Bluetooth
Projector
Volume
Charging indicator
Keystone
• If you move your device out of range, it will remain paired to the Bluetooth speaker for
10 minutes, but the speaker will not make any sound until the device is back within
range. After the device is out of range for 10 minutes, the speaker will reenter pairing
Notes:
• Make sure that the projector has enough ventilation. Do not cover the projector.
• Keep the projector stable. Do not walk around with the projector while in use.
3 Turn on your source device, then press and hold
(power) for two seconds to
turn on the projector. After turning on your projector, it displays “NO SIGNAL,”
then mirrors your device’s screen.
4 Aim the lens at a screen or blank wall, then turn the FOCUS dial to bring the
projection into focus.
USING THE HEADPHONE JACK
1 Connect headphones or another sound source with a 3.5 mm audio cable (not
included) into the headphone jack on the left side of your projector.
2 Press Vol+ and Vol-to adjust the volume.
3 Control playback using the controls on the source device.
Notes:
FOCUS
it is too hot or too cold.
Power
5 Use your video source device to control playback.
6 Press Vol+ or Vol-to adjust the projector’s volume level. Make sure that your
video source device’s volume is set to at least 50%.
Front
Note : You can also play audio through your video source device’s speakers.
Lens
Before using your new product, please read these instructions to prevent any damage.
NS-PR200_17-0460_QSG_V1_EN.ai 2 9/11/2017 8:20:39 AM
IMPORTANT SAFETY INSTRUCTIONS
•
•
•
•
•
Do not drop the projector.
Do not store or use the projector in an extremely hot area, such as a parked car.
Do not disassemble or modify the projector.
Do not block the vents on the side or top of the projector.
Do not expose the projector to extreme vibrations. It may damage internal
components.
TROUBLESHOOTING
My device does not recognize the projector.
• If using an Android device, make sure that it is HDMI-compatible. Check with your
device’s manufacturer for more information.
• If using an Apple device, make sure that you have connected a digital AV adapter
(with HDMI output).
• Try another video mode. The maximum input resolution is 1080p.
• Disconnect and reconnect the HDMI cable from the source device.
The image blinks or changes color.
• Reset your projector or connected device.
• The screen may blink if your phone receives a text message or call while it is
connected.
SPECIFICATIONS
5W Peak
Display
DLP DMD
LED life
20,000 hours (maximum)
Brightness
100 ANSI lumens (maximum)
Focus
Manual focusing dial
Resolution
WVGA (854 × 480)
Picture ratio
16:9
Maximum screen size (diagonal)
100 in. (254 cm)
Maximum input resolution
Up to 1080p
Dimensions
5.59 × 5.59 × 2.48 in. (14.2 × 14.2 × 6.3 cm)
Weight
1.56 lbs. (708 g)
Operating temperature
32~104°F (0~40°C)
Humidity
0~80%
Charging time
Operating time
Projector does not display image/video.
• If using a computer, make sure that your display option uses the projector.
• Make sure that your cable connections are correct and secure.
• Make sure that your projector and connected device are fully charged.
• Some apps may not support image projection.
• Check the documentation that came with your device to determine whether it can
display content through HDMI.
Projector does not play sound or is too quiet.
• Turn up the volume on your source device.
• Raise the volume level on your projector.
My device will not connect via Bluetooth
• Make sure that your projector and Bluetooth device are in pairing mode.
• Shorten the distance between your projector and your Bluetooth device.
•
•
•
•
device.
Make sure that your projector is not paired to another Bluetooth device.
Make sure that your Bluetooth device is not connected to any other device.
Make sure that you have selected NS-PR200 on your Bluetooth device.
Make sure that the nothing is connected to the headphone jack.
LEGAL NOTICES
120 minutes (average)
AC ADAPTER INFORMATION:
Input:AC 100-240V, 50/60Hz, 1.5A
Output: DC 12V, 3.0A
Maximum Ambient Temperature: 40°C, Class II
UL Approved
File No. E303985
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning
party responsible for compliance could void the user’s authority to operate the
equipment.
“This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
©2017 Best Buy. All rights reserved.
Made in China
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth
for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
The unit must be used with the
original accessories.
贴纸位置，大小46*20mm
V1 ENGLISH 17-0460

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Creator Tool                    : Adobe Illustrator CS5
Modify Date                     : 2017:09:20 11:51:17+08:00
Create Date                     : 2017:09:20 11:04:36+08:00
Metadata Date                   : 2017:09:20 11:51:17+08:00
Thumbnail Width                 : 236
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18819 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : 127075007529  微投MP-331说明书贴纸
Creator                         : gippe
Producer                        : Adobe PDF library 9.90
Document ID                     : xmp.did:FC692A70B09DE711806EAE2E90D27234
Instance ID                     : uuid:e9f56e86-51d3-404a-bb75-537f984065d0
Original Document ID            : uuid:a01d0a11-4d31-4ece-93c7-cd38ebb9e6fa
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:d2c682aa-7fde-4419-be4c-fb03f17dc9a2
Derived From Document ID        : xmp.did:38612134AE9DE711BA50E27A3AAB7D17
Derived From Original Document ID: uuid:a01d0a11-4d31-4ece-93c7-cd38ebb9e6fa
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved
History Instance ID             : xmp.iid:26FC64C11B9DE711A493BCCA705EE1CE, xmp.iid:0B9555CE279DE71189C992A0BE99197C, xmp.iid:38612134AE9DE711BA50E27A3AAB7D17, xmp.iid:FC692A70B09DE711806EAE2E90D27234
History When                    : 2017:09:19 17:20:19+08:00, 2017:09:19 18:46:34+08:00, 2017:09:20 10:48:38+08:00, 2017:09:20 11:04:37+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 549.849986
Max Page Size H                 : 602.653309
Max Page Size Unit              : Millimeters
Font Name                       : AdobeSongStd-Light, MyriadPro-Regular, MyriadPro-Cond, MyriadPro-BoldIt, MyriadPro-Light, MyriadPro-BoldCond, MyriadPro-It, MyriadPro-Bold, MyriadPro-Black
Font Family                     : Adobe 宋体 Std, MyriadPro Regular, MyriadPro Cond, MyriadPro BoldIt, MyriadPro Light, MyriadPro BoldCond, MyriadPro It, MyriadPro Bold, MyriadPro Black
Font Face                       : L, Regular, Cond, BoldIt, Light, BoldCond, It, Bold, Black
Font Type                       : Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown
Font Version                    : Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, 001.001, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03
Font Composite                  : False, False, False, False, False, False, False, False, False
Font File Name                  : AdobeSongStd-Light.otf, wmr_____.pfb; wmr_____.pfm, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc
Plate Names                     : Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Page Count                      : 1
For                             : �����,
Bounding Box                    : 43 45 1514 1654
Container Version               : 11
Creator Version                 : 15
Author                          : gippe
Image Height                    : 1609
Image Width                     : 1471
Image Size                      : 1471x1609
Megapixels                      : 2.4

EXIF Metadata provided by EXIF.tools