FORYOU MULTIMEDIA ELECTRONICS NS-PR200 Pico Projector with Premium Audio User Manual
FORYOU MULTIMEDIA ELECTRONICS CO., LTD Pico Projector with Premium Audio Users Manual
Contents
- 1. Users Manual
- 2. User Manual
Users Manual
Flat size (W×H): 480 × 240 cm Final folded size: 120 × 120 cm NS-PR200_17-0460_QSG_V1_EN.ai 1 9/11/2017 8:20:35 AM CONNECTING YOUR PROJECTOR Left 7 Press Keystone+ or Keystone –to correct the distortion during a tilted projection. Apple® iOS Devices Lightning® digital AV adapter (not included) QUICK SETUP GUIDE Pico Projector Charging portHDMI port Headphone jack OR 8 When you are done using the projector, press and hold Right NS-PR200 HDMI cable 30-pin digital AV adapter (not included) USING YOUR BLUETOOTH SPEAKER PACKAGE CONTENTS • • • • • • (power) for two Pico projector Mini/Micro HDMI adapter HDMI cable AC power adapter Soft carrying pouch Quick Setup Guide HDMI Focus dial OPTIONAL Connect if your device has a mini or micro HDMI port. CHARGING YOUR PROJECTOR Note : Use only the included AC power adapter. Plug the AC power adapter into a power outlet, then plug the 12V DC output end into the projector. The charging indicator lights red while charging, and it turns COMPATIBILITY Works with HDMI-compatible Android devices and devices with micro, mini, or standard HDMI outputs (up to 1080p). An Apple digital AV adapter is needed for Apple iOS devices (sold separately). HDMI cable Mini/Micro HDMI adapter Bluetooth speaker. For best sound performance, keep your Bluetooth device no farther than 33 ft. (10 m) from your projector. 1 Turn on your source device, then press and hold (Bluetooth) for two seconds to turn on Bluetooth pairing mode. The Bluetooth indicator blinks. 2 Turn on your device’s Bluetooth, then pair your device with “NS-PR200.” When pairing is completed, the Bluetooth indicator stays on and the projector beeps twice. 3 Begin playing audio on your Bluetooth device. It should play through the speakers on your projector. Notes: FEATURES USING YOUR PROJECTOR • • • • Tip: For the best picture, use the projector in a dark room or with a small picture in a brighter room. 1 Connect your video source device to your projector. See “CONNECTING YOUR PROJECTOR” above for instructions. 100 lumen output with long-life LEDs Projects images up to 100 in. (254 cm) (16:9 aspect ratio) Accepts up to 1080p video signals for maximum compatibility Internal battery with 120 minutes of run time (normal brightness at 50% volume level—will vary depending on use) speakers To check your battery level, refer to the table below: • Can be used as an audio-only Bluetooth speaker • 3.5 mm stereo audio output for use with headphones or external audio devices CHARGING INDICATORBATTERY STATUS Green 80-100% Top Yellow 31-79% Red 0-30% Bluetooth Projector Volume Charging indicator Keystone • If you move your device out of range, it will remain paired to the Bluetooth speaker for 10 minutes, but the speaker will not make any sound until the device is back within range. After the device is out of range for 10 minutes, the speaker will reenter pairing Notes: • Make sure that the projector has enough ventilation. Do not cover the projector. • Keep the projector stable. Do not walk around with the projector while in use. 3 Turn on your source device, then press and hold (power) for two seconds to turn on the projector. After turning on your projector, it displays “NO SIGNAL,” then mirrors your device’s screen. 4 Aim the lens at a screen or blank wall, then turn the FOCUS dial to bring the projection into focus. USING THE HEADPHONE JACK 1 Connect headphones or another sound source with a 3.5 mm audio cable (not included) into the headphone jack on the left side of your projector. 2 Press Vol+ and Vol-to adjust the volume. 3 Control playback using the controls on the source device. Notes: FOCUS it is too hot or too cold. Power 5 Use your video source device to control playback. 6 Press Vol+ or Vol-to adjust the projector’s volume level. Make sure that your video source device’s volume is set to at least 50%. Front Note : You can also play audio through your video source device’s speakers. Lens Before using your new product, please read these instructions to prevent any damage. NS-PR200_17-0460_QSG_V1_EN.ai 2 9/11/2017 8:20:39 AM IMPORTANT SAFETY INSTRUCTIONS • • • • • Do not drop the projector. Do not store or use the projector in an extremely hot area, such as a parked car. Do not disassemble or modify the projector. Do not block the vents on the side or top of the projector. Do not expose the projector to extreme vibrations. It may damage internal components. TROUBLESHOOTING My device does not recognize the projector. • If using an Android device, make sure that it is HDMI-compatible. Check with your device’s manufacturer for more information. • If using an Apple device, make sure that you have connected a digital AV adapter (with HDMI output). • Try another video mode. The maximum input resolution is 1080p. • Disconnect and reconnect the HDMI cable from the source device. The image blinks or changes color. • Reset your projector or connected device. • The screen may blink if your phone receives a text message or call while it is connected. SPECIFICATIONS 5W Peak Display DLP DMD LED life 20,000 hours (maximum) Brightness 100 ANSI lumens (maximum) Focus Manual focusing dial Resolution WVGA (854 × 480) Picture ratio 16:9 Maximum screen size (diagonal) 100 in. (254 cm) Maximum input resolution Up to 1080p Dimensions 5.59 × 5.59 × 2.48 in. (14.2 × 14.2 × 6.3 cm) Weight 1.56 lbs. (708 g) Operating temperature 32~104°F (0~40°C) Humidity 0~80% Charging time Operating time Projector does not display image/video. • If using a computer, make sure that your display option uses the projector. • Make sure that your cable connections are correct and secure. • Make sure that your projector and connected device are fully charged. • Some apps may not support image projection. • Check the documentation that came with your device to determine whether it can display content through HDMI. Projector does not play sound or is too quiet. • Turn up the volume on your source device. • Raise the volume level on your projector. My device will not connect via Bluetooth • Make sure that your projector and Bluetooth device are in pairing mode. • Shorten the distance between your projector and your Bluetooth device. • • • • device. Make sure that your projector is not paired to another Bluetooth device. Make sure that your Bluetooth device is not connected to any other device. Make sure that you have selected NS-PR200 on your Bluetooth device. Make sure that the nothing is connected to the headphone jack. LEGAL NOTICES 120 minutes (average) AC ADAPTER INFORMATION: Input:AC 100-240V, 50/60Hz, 1.5A Output: DC 12V, 3.0A Maximum Ambient Temperature: 40°C, Class II UL Approved File No. E303985 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning party responsible for compliance could void the user’s authority to operate the equipment. “This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, Visit www.insigniaproducts.com for details. CONTACT INSIGNIA: For customer service, call 877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com Distributed by Best Buy Purchasing, LLC ©2017 Best Buy. All rights reserved. Made in China encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RSS-Gen & RSS-247 statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 Statement: This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. The unit must be used with the original accessories. 贴纸位置,大小46*20mm V1 ENGLISH 17-0460
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Creator Tool : Adobe Illustrator CS5 Modify Date : 2017:09:20 11:51:17+08:00 Create Date : 2017:09:20 11:04:36+08:00 Metadata Date : 2017:09:20 11:51:17+08:00 Thumbnail Width : 236 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 18819 bytes, use -b option to extract) Format : application/pdf Title : 127075007529 微投MP-331说明书贴纸 Creator : gippe Producer : Adobe PDF library 9.90 Document ID : xmp.did:FC692A70B09DE711806EAE2E90D27234 Instance ID : uuid:e9f56e86-51d3-404a-bb75-537f984065d0 Original Document ID : uuid:a01d0a11-4d31-4ece-93c7-cd38ebb9e6fa Rendition Class : proof:pdf Derived From Instance ID : uuid:d2c682aa-7fde-4419-be4c-fb03f17dc9a2 Derived From Document ID : xmp.did:38612134AE9DE711BA50E27A3AAB7D17 Derived From Original Document ID: uuid:a01d0a11-4d31-4ece-93c7-cd38ebb9e6fa Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved History Instance ID : xmp.iid:26FC64C11B9DE711A493BCCA705EE1CE, xmp.iid:0B9555CE279DE71189C992A0BE99197C, xmp.iid:38612134AE9DE711BA50E27A3AAB7D17, xmp.iid:FC692A70B09DE711806EAE2E90D27234 History When : 2017:09:19 17:20:19+08:00, 2017:09:19 18:46:34+08:00, 2017:09:20 10:48:38+08:00, 2017:09:20 11:04:37+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, / N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 549.849986 Max Page Size H : 602.653309 Max Page Size Unit : Millimeters Font Name : AdobeSongStd-Light, MyriadPro-Regular, MyriadPro-Cond, MyriadPro-BoldIt, MyriadPro-Light, MyriadPro-BoldCond, MyriadPro-It, MyriadPro-Bold, MyriadPro-Black Font Family : Adobe 宋体 Std, MyriadPro Regular, MyriadPro Cond, MyriadPro BoldIt, MyriadPro Light, MyriadPro BoldCond, MyriadPro It, MyriadPro Bold, MyriadPro Black Font Face : L, Regular, Cond, BoldIt, Light, BoldCond, It, Bold, Black Font Type : Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown Font Version : Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, 001.001, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03, Version 5.03 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : AdobeSongStd-Light.otf, wmr_____.pfb; wmr_____.pfm, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc, simsun.ttc Plate Names : Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 1 For : �����, Bounding Box : 43 45 1514 1654 Container Version : 11 Creator Version : 15 Author : gippe Image Height : 1609 Image Width : 1471 Image Size : 1471x1609 Megapixels : 2.4EXIF Metadata provided by EXIF.tools