Fandom Connect Operating BUZCONMD BUZZ BLE MODULE ONLY User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3688835
Application ID	zv3IBqaTnixMQR7fL8NiLw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.32kB (478980 bits)
Date Submitted	2017-12-22 00:00:00
Date Available	2018-06-20 00:00:00
Creation Date	2017-12-11 11:55:07
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-12-11 15:27:45
Document Title	Microsoft Word - BLE?Module?规格书 更新.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jing_song

深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Revision History
Rev
History
Issue Date
Remark
100
Initial issue
May, 2015
Preliminary
101
Renew Bill of Material
June, 2016
Modify RF matching
component value
changes
102
Renew Bill of Material
Aug, 2016
Subjoin 32K type A8105
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
● All packets are using the 24-bit CRC
checksum.
● Automatically adapt to the fast frequency
hopping.
● Bluetooth 4.0 Single mode.
● Power supply @2.0V~3.6V
● Very Low Power Operation.
● Outline: 18.3 x 15.9 mm
General Description:
This BLE module is a high performance and
2.4GHz GFSK system-on-chip (SOC)
wireless transceiver.
With on chip fraction-N synthesizer, it can
support the application of data rate from
4Kbps to 2Mbps and
frequency hopping system.
Applications:
This device integrates high speed pipeline
● Lighting control.
8051 MCU, *16K/32K Bytes In-system
● Temperature detection .
programmable flash memory,
2KB SRAM, various powerful functions and
● Wearable devices.
excellent performance of a leading 2.4GHz
● UART interface control.
FSK/GFSK RF
● SPI interface control.
transceiver.
It can be operated with wide voltage from
2.0V ~ 3.6V.
It has various operating modes, making it
highly suited for systems where ultra-low
power
consumption is required.
Remark *:
Version 16K_SMD8105-A07
Version 32K_SMD8105-A08
Features:
● Frequency Range: 2402 ~ 2480 MHz
ISM (channel spacing is 2MHz).
● Modulate mode: GFSK.
● Support the application of data rate
from 4Kbps to 2Mbps.
● Using AES-128 CCM encryption
algorithm.
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Module Electrical Specifications:
Item
Specification
Supply voltage
2.0V~3.6V
Remark
0.8uA @Deep Sleep mode
3mA @Stand-by mode
Current consumption
typical
9.5mA @PLL mode
18mA @Rx mode
23.5mA @Tx mode (Pout = 6dBm)
Frequency
Transmit output power
2402 – 2480 MHz
ISM band
-4.21 dBm @ room temperature
Typical
Annotation1
Rx sensitivity
-92 dBm (typical) @ 1Mbps mode
Modulation
GFSK
Interface
19 pin 1.27mm header
18.3mm(L) x 15.9mm(W) mm2
Dimension
with Antenna
(PCB thickness is 0.8mm)
Operating temperature
-40 ~ 85 ℃
BER≦1E-3
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Annotation1:
1. Tx output power =- 4.21dBm,
Register: [082C] Tx test(TBG: 6, PAC: 3, TXCS: Low Current ) value:0X5E.
2. TX output power can be set by Register: [082C] Tx test.
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Module dimension drawing (Top view)
Module PCB size & Module Pin Assignments:
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Module Pin Functions:
J1:
Pin No. Symbol
Function Description
RESET
RESETN.
VPP
High voltage pin used for OTP ROM program.
P 3_2
INT0/ADC0.
P 3_1
UARTO_TX/ADC7.
P 3_0
UARTO_RX/ADC6.
P 1_7
PWM1/ADC5.
Pin No.
Symbol
Remark
J2:
Function Description
GND
Ground.
REGI
RF Module supply voltage supply input.
SPI_SCLK/IN0.
P 0_0
P 0_1
P 0_2
SPI_MISO/RS0.
P 0_3
SPI_SSEL/RT0.
P 0_4
GPIO/ICE mode.
P 0_5
I2C_SCL.
P 0_6
I2C_SDA.
10
P 0_7
INT2/GIO1.
11
P 1_4
TTAG_TTDIO AMICCOM CONFIDENTIAL.
12
P 1_5
TTAG_TTCLK.
13
P 1_6
PWM0/ADC4
SPI_MOSI/CS0.
Remark
2.0 ~ 3.6V
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Module Application Circuit:
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Module Bill of Material:
Item Component
Description
1 C1, C2 C20 C0G ceramic capacitor
C3, C6,
C8,C9, C12
C0G ceramic capacitor
Size
Value
Tol.
ManufacturerManufacturer Number
0402
22pF
±5%
Murata
0402
1uF
±10%
0402
3.9pF
± 0.25pFMurata
0603
2.2uF
±20%
GRM1555C1H150JA01
C4
GRM1555C1H3R9CA01
C5
C7
C0G ceramic capacitor
0402
330pF
±5%
Murata
GRM1555C1H331JA01
C10
C0G ceramic capacitor
0402
120pF
±5%
Murata
GRM1555C1H121JA01
C13, C21 C0G ceramic capacitor
0402
100pF
±5%
Murata
GRM1555C1H101JA01
C18 C19 C0G ceramic capacitor
0402
1.2pF
± 0.25pFMurata
GRM1555C1H1R2CA01
C22
0402
0.1uF
±10%
10
C23
0402
3.3nF
±10%
11
L1
Chip inductor
0402
4.7nH
±0.3nH Murata
LQG15HS4N7S02
12
L2
Chip inductor
0402
3.9nH
±0.3nH Murata
LQG15HS3N9S02
13
L3
Chip inductor
0402
9.1nH
±5%
Murata
LQG15HS9N1J02
14
L5
Chip inductor
0402
2.4nH
±0.3nH Murata
LQG15HS2N4S02
15
L4
Chip resistor
0402
0 ohm
16
R1
Chip resistor
0402
100K ohm
17
U1
18
Y1
Crystal
3.2 x2.5mm 16MHz,CL =12pF±20ppm YIC
19
Y3
Crystal
7.0 x1.5mm 32.768KHz
QFN 40(5x5)A8105
±5%
Amiccom
±20ppm YIC
3.2 x1.5mm CL = 12.5pF
Annotation1:
1. A8105 has built-in crystal loading. User can set VCOSC[5:0] to meet crystal loading.
Requirement.
2. Recommend VCOSC = 20, if crystal load = 12pF.
Recommend VCOSC = 13, if crystal load = 9pF.
Annotation2:
1. A81X05F4001AQ5A 16K.
2. A81X05F5001AQ5A 32K.
Annotation2
Annotation1
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Module Application:
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
FCC Part 15 Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Please notice that if the FCC identification number is not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following: “Contains FCC ID: 2AA7CBUZCONMD”.
Note: The OEM integrator is responsible for ensuring that the host product which is installed and operating with the
module is in compliant with Part 15B unintentional Radiator requirements, please note that For a Class B digital device or
peripheral, the instructions furnished the user manual of the end‐user product shall include the following or similar
statement, placed in a prominent location in the text of the host product manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter
must not be co‐located or operating in conjunction with any other antenna or transmitter.
The module is limited to installation in mobile application; A separate approval is required for all other operating
configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations.
10
深圳朗特智能控制股份有限公司
Shenzhen Longtech Smart Control Co.,Ltd
Tel:+86-755-81731128 Fax:+86-75-81731138
Industry Canada Compliance Statement
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Please notice that if the IC identification number is not visible when the module is installed inside another device, then
the outside of the device into which the module is installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following: “Contains IC: 11838A‐ BUZCONMD .
L’étiquette d’homologation d’un module d’Innovation, Sciences et Développement économique Canada devra être posée
sur le produit hôte à un endroit bien en vue, en tout temps. En l’absence d’étiquette, le produit hôte doit porter une
étiquette sur laquelle figure le numéro d’homologation du module d’Innovation, Sciences et Développement économique
Canada, précédé du mot « contient », ou d’une formulation similaire allant dans le même sens et qui va comme suit :
Contient IC : 11838A‐ BUZCONMD est le numéro d’homologation du module.
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre
corps.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : jing_song
Create Date                     : 2017:12:11 11:55:07+08:00
Modify Date                     : 2017:12:11 15:27:45+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:12:11 15:27:45+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - BLE?Module?规格书 更新.docx
Creator                         : jing_song
Document ID                     : uuid:5b6fef60-2eb5-4732-b172-3825c79e3632
Instance ID                     : uuid:0e15a950-167b-487e-a697-1229133135ef
Page Count                      : 11

EXIF Metadata provided by EXIF.tools