Faurecia Clarion Electronics PE3155B1 CAR RADIO WITH CD PLAYER User Manual CZ509
Clarion Co., Ltd. CAR RADIO WITH CD PLAYER CZ509
UserManual.wiki
>
Faurecia Clarion Electronics
>
PE3155B1 User Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![English5 CZ509Flip Down PanelThis unit uses a flip-down structure that makes possible large-size displays.CAUTIONWhen opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured.1. Always use this unit with the FLIP DOWN PANEL closed.2. Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL.3. Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open.4. When closing the FLIP DOWN PANEL, do not press the [OPEN] button.∗Press the center of the DCP to close.5. Strong impacts to the operating or display section can cause damage or deformation.6. If the FLIP DOWN PANEL does not open fully, gently open it with your hand.Handling Compact Discs• Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car.•Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.Display ScreenIn extreme cold, the screen movement may slow down and the screen may darken, but this is normal.The screen will recover when it returns to normal temperature.DCPCZ509_ENG.book Page 5 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-5.png)
![English6CZ509 3. CONTROLSNames of the Buttons and Their Main FunctionsWith the FLIP DOWN PANEL opened[OPEN] button• Deeply push in [OPEN] button to unlock the flip down panel.[DISP] button• Switch the display indication.[BND] button• Change bands, or select seek tuning or manual tuning while in the radio mode.[IR RECEIVER]• Receiver for remote control unit. (Operating range: 30° in all directions)[AUX] input jack•Input jack for connecting external device.[SOUND] button• Press to switch to the sound adjust mode.[DIRECT] buttons• Store radio stations in memory or recall it directly while in radio mode.[RDM] button• Perform random play while in CD/MP3/WMA/AAC/USB/iPod mode.[RPT] button• Perform repeat play while in CD/MP3/WMA/AAC/USB/iPod mode.[SCN] button• Perform scan play for 10 seconds of each track while in CD/MP3/WMA/AAC/USB mode.[] (UP), [] (DN) buttons• Select folders while in MP3/WMA/AAC/USB mode.[OPEN][ ][BND][DISP][IR RECEIVER][AUX][SCN][RPT][SOUND][DIRECT][RDM][ISR][ROTARY][SRC][ ], [ ][Q] (EJECT)[CD SLOT]CZ509_ENG.book Page 6 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-6.png)
![Names of the Buttons and Their Main FunctionsEnglish7 CZ509[ROTARY] knob• Rotate to adjust the volume.[ISR] button• Recall ISR radio station in memory.• Press and hold the button (2 sec.) to store current station into ISR memory (radio mode only).[SRC] button•Turn the power on/off.[x], [v] buttons• Commence fast-forward or fast-reverse mode.[ ] button• Perform preset scan while in the radio mode.• Play or pause a track while in CD/MP3/WMA/AAC/USB/iPod mode.[Q] (EJECT) button• Press to eject disc.[CD SLOT]• Insert CDs here.CZ509_ENG.book Page 7 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-7.png)
![English8CZ509 4. DCPThe control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car.Removing the DCP1. Press the [SRC] button (1 sec.) to turn off the power.2. Deeply push in [OPEN] button to unlock the flip down panel.If the flip down panel does not open fully, gently open it with your hand.3. Pull the DCP toward you and remove it.4. Close the HOLD FLAP.CAUTIONBe sure to close the HOLD FLAP for safety when removing the DCP.Attaching the DCP1. Insert the right side of the DCP into the main unit.2. Insert the left side of the DCP into the main unit.Storing the DCP in the DCP Case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.)CAUTION• The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.• If the FLIP DOWN PANEL is kept open, the DCP may drop due to vibration of the car. This results in damage to the DCP. So close the FLIP DOWN PANEL or remove the DCP to store into the case.• The connector connecting the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.Note:• If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.DCP[OPEN] buttonDCPHOLD FLAP1.2.DCPDCPDCP caseCZ509_ENG.book Page 8 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-8.png)
![English9 CZ5095. REMOTE CONTROLFunctions of Remote Control Unit Buttons∗Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit.●Shared modes[SRC] button• Press the button to turn on the power.Press and hold the button (1 sec.) to turn off the power.• Use to alternate operation mode among the various modes.[w], [z] buttons• Increases and decreases volume.[MUTE] button•Turns mute function on and off.[ISR] button• Recalls ISR radio station stored in memory.• Press and hold the button (2 sec.) to store current station in ISR memory (radio mode only).[DISP] button• Press to select the desired display.●Radio/Satellite Radio modes[BND] button• Switches reception band.[x], [v] buttons•Moves preset channels up and down.[SCN] button• Press to perform preset scan.• Press and hold the button (2 sec.) to perform auto store.• In the Satellite Radio mode, press once to perform category scan; hold depressed (1 sec.) to perform preset scan.●CD/MP3/WMA/AAC and USB/MTP modes[BND] button• Press to play the first track.[x], [v] buttons• Press to select tracks.• Press and hold the button (1 sec.) to perform fast-forward/fast-reverse (Except DRM file).[ ] button• Switches between playback and pause.[SCN] button• Press to perform scan play.•When in MP3/WMA/AAC and USB/MTP modes, press and hold the button (1 sec.) to perform folder scan play.[RPT] button• Press to perform repeat play.•When in MP3/WMA/AAC and USB/MTP modes, press and hold the button (1 sec.) to perform folder repeat play.[RDM] button• Press to perform random play.•When in MP3/WMA/AAC and USB/MTP modes, press and hold the button (1 sec.) to perform folder random play.[SRC][BND][MUTE][ISR][SCN][DISP][RDM][RPT]Signal transmitterCZ509_ENG.book Page 9 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-9.png)
![English10 CZ509 ●CD changer mode[BND] button•Press to switch to next disc in ascending order.[x], [v] buttons• Press to move the tracks up and down.• Press and hold the button (1 sec.) to perform fast-forward/fast-backward.[] button•Switches between playback and pause.[SCN] button• Press to perform scan play.• Press and hold the button (1 sec.) to perform disc scan play.[RPT] button• Press to perform repeat play.• Press and hold the button (1 sec.) to perform disc repeat play.[RDM] button• Press to perform random play.• Press and hold the button (1 sec.) to perform disc random play.●iPod mode[x], [v] buttons• Press to move the tracks up and down. • Press and hold the button (1 sec.) to perform fast-forward/fast-reverse.[ ] button• Switches between playback and pause.[RPT] button• Press to perform repeat play.[RDM] button• Press to perform random play.• Press and hold the button (1 sec.) to perform all random play.Inserting the Battery1Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration.2Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards.3Press the battery in the direction indicated by the arrow so that it slides into the compartment.4Replace the cover and slide in until it clicks into place.Notes: Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials. Always follow these safety precautions:• Use only the designated battery.• When replacing the battery, insert properly, with +/– polarities oriented correctly.• Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery.• Dispose of used batteries properly.CR2025 Insertion guideFunctions of Remote Control Unit ButtonsCZ509_ENG.book Page 10 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-10.png)
![English11 CZ5096. OPERATIONSNote:• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.Basic OperationsCAUTIONBe sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting.Turning on/off the power Note:1. Press the [SRC] button to turn on the power.2. Press and hold the [SRC] button (1 sec.) to turn off the power for the unit.Note:• System checkThe first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, the “SYSTEM CHECK” appears in the display, then the unit returns to the clock display mode. The system check starts within the unit. Then press the [SRC] button again, the unit turn to the radio mode.Selecting a mode1. Press the [SRC] button to change the operation mode.2. Each time you press the [SRC] button, the operation mode changes in the following order:Radio ➜ (Satellite radio) ➜ CD/MP3/WMA/AAC ➜ USB/MTP/iPod ➜ BLUETOOTH ➜ (CD changer) ➜ AUX ➜ Radio...∗External equipment not connected with CeNET is not displayed.∗iPod/MTP can connect to this unit via USB cable.Adjusting the volume1. Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.∗The volume level is from 0 (minimum) to 33 (maximum).Switching the displayPress the [DISP] button to select the desired display.Sound AdjustmentYou can adjust a sound effect or tone quality to your preference.●Setting the BEAT EQThis unit is provided with 4 types of sound tone effects stored in memory.Select the one you prefer.∗The factory default setting is “OFF”.2-1. Select “BEAT EQ”.To change sound setting1. Press the [SOUND] button to switch to the sound adjustment selection display.∗The factory default sound setting is “BEAT EQ”.2. Then press the [x] or [v] button to select the sound adjustment mode.Each time you press the [x] or [v] button, the sound adjustment mode changes as following order:“BEAT EQ” ↔ “M-B EX” ↔ “BALANCE” ↔ “FADER” ↔ “LPF” ↔ “S-W VOL” ↔ “HPF”∗In the case of display blinking “ENT”, you can press the [ ] button to adjust the setting value.3. Press the [ ] or [ ] button to adjust the selected audio mode.4. After completing settings, press the [SOUND] button to return to the previous mode.CZ509_ENG.book Page 11 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-11.png)
![Basic OperationsEnglish12 CZ509 3-1. Each time you press the [ ] or [ ] button, the tone effect changes in the following order:“CUSTOM” ↔ “EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔ “OFF”CUSTOM :user customEXCITE :bass and treble emphasized mid emphasizedIMPACT :bass and treble emphasizedB-BOOST :bass emphasizedOFF : no sound effectWhen “CUSTOM” is set:3-1. Press the [ ] button.3-2. Press the [x] or [v] button to select the “BASS, MID” or “TREBLE” mode to adjust.3-3. If you want to set the flat, press the [ ] button to return to the “CUSTOM” mode, then press and hold the [ ] button for 1second or longer, bass/mid/treble characteristics become flat.When “EXCITE/IMPACT/B-BOOST” is set:3-1. Press the [ ] button.3-2. Press the [ ] or [ ] button to adjust the setting in the range of –3 to +3.∗The factory default setting is “0”.3-3. Press the [ ] button to return to the previous mode.●Adjusting the BASS/MID/TREBLEThis adjustment can be performed only when the BEAT EQ is set to “CUSTOM”.Note:• While connected with the external amplifers, please do not set the “BASS/MID/TREBLE” in the maximum level. Otherwise the speakers may be damaged.3-1. Press the [ ] button.3-2. Press the [x] or [v] button to select as following order.“BASS<G>” ↔ “BASS<F>” ↔ “BASS<Q>” ↔ “MID<G>” ↔ “MID<F>” ↔ “MID<Q>” ↔ “TREBLE<G>” ↔ “TREBLE<F>” ↔ “TREBLE<Q>”∗The factory default setting is “BASS G”.3-3. Press the [ ] or [ ] button to select the setting.BASS<G>:The factory default setting is “0”.(Adjustment range: +7 to –7)BASS<F>:The factory default setting is “50”.(Adjustment range: 50/100/200)BASS<Q>:The factory default setting is “1”.(Adjustment range: 0.7/1/1.4/2)MID<G> : The factory default setting is “0”.(Adjustment range: +7 to -7)MID<F> :The factory default setting is “500”.(Adjustment range: 500/1K/2K)MID<Q> :The factory default setting is “1”.(Adjustment range: 0.7/1/1.4/2)TREBLE<G>:The factory default setting is “0”.(Adjustment range: +7 to -7)TREBLE<F>:The factory default setting is “10K”.(Adjustment range: 5K/10K/15K)TREBLE<Q>:The factory default setting is “1”.(Adjustment range: 0.7/1/1.4/2)3-4. Press the [ ] button to return to the previous mode.●Setting the MAGNA BASS EXTENDThe MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.∗The factory default setting is “OFF” (off).2-1. Select “M-B EX”.3-1. Press [ ] or [ ] button to select “ON” or “OFF”.●Adjusting the balance2-1. Select “BALANCE”.3-1. Press the [ ] or [ ] button to adjust the balance of the right and left speakers.∗The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))●Adjusting the fader2-1. Select “FADER”.3-1. Press the [ ] or [ ] button to adjust the balance of the rear and front speakers.∗The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))●Setting the subwooferYou can set the low pass filter of subwoofer.2-1. Select “LPF”.3-1. Each time press the [ ] or [ ] button to select the setting, the setting changes in the following order: “THROUGH” ↔ “60” ↔ “90” ↔ “120”CZ509_ENG.book Page 12 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-12.png)
![Basic OperationsEnglish13 CZ509∗The factory default setting is “THROUGH”.●Adjusting the subwoofer output volumeYou can adjust the volume output from the unit’s subwoofer output terminal.2-1. Select “S-W VOL”.3-1. Press the [ ] or [ ] button to increases or decreases the subwoofer volume.∗The factory default setting is “0”. (Adjustment range: +6 to –6)●Adjusting the high pass filter2-1. Select “HPF”.3-1. Each time you press the [ ] or [ ] button to select the setting.The setting changes in the following order: “THROUGH” ↔ “60” ↔ “90” ↔ “120”∗The factory default setting is “THROUGH” (through).Setting the BBE MP (Sound Enhancement and Restoration for compressed audio files)BBE MP (Minimized Polynomial Non-Linear Saturation) Process improves digitally compressed sound, such as MP3, by restoring and enhancing the harmonics lost through compression. BBE MP works by regenerating harmonics from the source material, effectively recovering warmth, detail and nuance.∗This fuction is effective for the audio files in the CD/MP3/WMA/AAC or USB/iPod mode, but it is ineffective for the video in the USB/iPod mode.1. Press the [SOUND] button to switch to the sound adjustment selection display.2. Press the [x] or [v] button to select “BBE MP”.3. Press the [ ] or [ ] button to select “ON” or “OFF”.∗The factory default setting is “OFF”.4. When you select “ON”, press the [ ] button, then press the [ ] or [ ] button to select as following order.LOW ↔ MID ↔ HIGHNotes: • Manufactured under license from BBE Sound, Inc.• Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.• During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.CZ509_ENG.book Page 13 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-13.png)
![English14 CZ509 Radio OperationsListening to the radio1. Press the [SRC] button and select the radio mode. 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...TuningThere are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.Seek tuning 1. Press the [BND] button and select the desired band (FM or AM).∗If “MANU” is lit in the display, press and hold the [BND] button (1 sec.). “MANU” in the display goes off and seek tuning is now available.2. Press the [x] or [v] button to automatically seek a station.Manual tuningThere are 2 ways available: Quick tuning and step tuning. ●Quick tuningPress and hold the [x] or [v] button (1 sec.) to tune in a station.●Step tuningPress the [x] or [v] button to manually tune in a station.Recalling a preset stationA total of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exists to store individual radio stations in memory. Press the corresponding [DIRECT] button or the [ ] / [ ] button to recall the stored radio frequency automatically.Manual memory1. Select the desired station with seek tuning or manual tuning.2. Press and hold one of the [DIRECT] buttons (2 sec.) to store the current station into preset memory.Auto storeAuto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.1. Press the [BND] button and select the desired band (FM or AM).2. Press and hold the [ ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.Preset scanPreset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.1. Press the [ ] button.2. When a desired station is tuned in, press the [ ] button again to continue receiving that station.Note:• Be careful not to press and hold the [ ] button (2 sec.), otherwise the auto store function is engaged and the unit starts storing stations.Instant station recall (ISR)Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.●ISR memory1. Select the station that you wish to store in ISR memory.2. Press and hold the [ISR] button (2 sec.).●Recalling a station with ISRIn any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode.CZ509_ENG.book Page 14 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-14.png)
![English15 CZ509CD/MP3/WMA/AAC OperationsMP3/WMA/AACThis unit can play back MP3/WMA/AAC files.Notes:• If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks).• Windows Media™, and the Windows® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.●To disable DRM (Digital Rights Management)1. When using Windows Media Player 9/10/11, click on TOOL ➜ OPTIONS ➜ MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility.Precautions when creating MP3/WMA/AAC file●Usable sampling rates and bit rates1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate 8 kbps-320 kbps / VBR2. WMA: Bit rate 8 kbps-320 kbps3. AAC: Sampling rate 8 kHz-48 kHz, Bit rate 8 kbps-320 kbps / VBR●File extensions1. Always add a file extension “.MP3”, “.WMA” or “.M4A” to MP3, WMA or AAC file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. 2. Files without MP3/WMA/AAC data will not play. The files will be played soundlessly if you attempt to play files without MP3/WMA/AAC data.∗When VBR files are played, the play time display may differ the play location. ∗When MP3/WMA/AAC files are played, a little no sound part is caused between tunes.●Logical format (File system)1. When writing MP3/WMA/AAC file on a CD-R disc or CD-RW disc, please select “ISO9660 level 1, 2 or JOLIET or Romeo” or APPLE ISO as the writing software format. Normal play may not be possible if the disc is recorded on another format.2. The folder name and file name can be displayed as the title during MP3/WMA/AAC play but the title must be within 64 single byte alphabetical letters and numerals (including an extension).3. Do not affix a name to a file inside a folder having the same name.●Folder structure1. A disc with a folder having more than 8 hierarchical levels will be impossible.●Number of files or folders1. Up to 255 files can be recognized per folder. Up to 510 files can be played.2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)3. Some noise may occur depending on the type of encoder software used while recording.Set the type of file to be played (multi-session function)When a single disc holds both normal CD type tracks and MP3/WMA/AAC type tracks, use this command to select which type of track to play.∗Default setting is “CD”.•When only one type of track (either music CD or MP3/WMA/AAC) is recorded on a disc, selecting either type will allow playback of the disc.•When playing CCCD (copy-control CDs), set to CD type.1. Press and hold the [DISP] button for 1 second or longer.2. Press the [x] or [v] button to select “M-SESS”.3. Press the [ ] or [ ] button to select the “CD” or “MP3”.•“CD”When playing music CD only.•“MP3”When playing music MP3/WMA/AAC only.4. When setting is completed, remove the disc and reinsert it.CZ509_ENG.book Page 15 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-15.png)
![CD/MP3/WMA/AAC OperationsEnglish16 CZ509 Disc-In-Play functionAs long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on. CAUTION• Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot. • Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down. Backup Eject functionJust pressing the [Q] button, ejects the disc even if the power to the unit was not turned on.1. Press the [OPEN] button to open the FLIP DOWN PANEL.Note:∗If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.2. Press the [EJECT] button. Remove the disc after it is ejected.3. Close the FLIP DOWN PANEL.∗Press the center of the DCP to close.Notes:• Always close the FLIP DOWN PANEL once you take out the disc.• If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).• If you force a CD into before auto reloading, this can damage the CD.Listening to a disc already loaded in the unitPress the [SRC] button to select the CD/MP3/WMA/AAC mode.When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically.If there is no disc loaded, the indication “NO DISC” appears in the title display.Loading a CD1. Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.2. Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts.Notes:• Never insert foreign objects into the CD SLOT.• If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.• Discs not bearing the or mark and CD-ROMs cannot be played by this unit.• Some CDs recorded in CD-R/CD-RW mode may not be usable.3. Close the FLIP DOWN PANEL.∗Press the center of the DCP to close.CAUTIONBe careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.Notes:∗If the FLIP DOWN PANEL does not open fully, gently open with your hand.∗After loading a CD, always close the FLIP DOWN PANEL.Pausing play1. Press the [ ] button to pause play.“PAUSE” appears in the display.2. To resume CD play, press the [ ] button again.Displaying CD titlesThis unit can display title data for CD-text/MP3/WMA/AAC disc and user titles input with this unit.1. Each time you press the [DISP] button to change the title display.●CD-TEXT discUser ➜ Track ➜ Disc/Artist ➜ User ...●MP3/WMA/AAC discTrack ➜ Folder ➜ Title/Album ➜ Artist ➜ Track ...CZ509_ENG.book Page 16 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-16.png)
![English17 CZ509Notes:• If the CD playing is not a CD-text CD or no user title has been input, “NO TITLE” appears in the display.• If MP3/WMA/AAC disc is not input TAG, “NO TITLE” appears in the display.• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.• Tag displays give priority to V2.3 / 2.2.• In the case of album Tags for WMA, the information written into the extension header is displayed. • Only ASCII characters can be displayed in Tags.Selecting a track●Track-up1. Press the [v] button to move ahead to the beginning of the next track.2. Each time you press the [v] button, the track advances ahead to the beginning of the next track.●Track-down1. Press the [x] button to move back to the beginning of the current track.2. Press the [x] button twice to move back to the beginning of the previous track.Fast-forward/fast-reverse●Fast-forward1. Press and hold the [v] button (1 sec.).●Fast-reverse1. Press and hold the [x] button (1 sec.).∗For MP3/WMA/AAC discs, it takes some time until the start of searching and between tracks. In addition, the playing time may have a margin of error.Folder SelectThis function allows you to select a folder containing MP3/WMA/AAC files and start playing from the first track in the folder.1. Press the [ ] or [ ] button.Press the [ ] button to move the next folder. Press the [ ] button to move the previous folder.2. To select a track, press the [x] or [v] button.Top functionThe top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc.∗In case of MP3/WMA/AAC, the first track of a folder being played will be returned.List search function1. Press and hold the [BND] button (1 sec.) to enter the list search mode. And then the track list appears in the display.2. Prsee the [ ] or [ ] button to select a track.∗If you press the [x] or [v] button, the track list scroll 5 lines at a time.3. Press the [ ] button to play.∗In case of MP3/WMA/AAC, this function is performed in the current folder.Note:• If no operation is performed for more than 10 seconds, this mode can be cancel and return to the usual mode.Other various play functions●Scan playThis function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc.1. Press the [SCN] button to perform scan play. ●Folder scan playThis function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3/WMA/AAC disc.1. Press and hold the [SCN] button (1 sec.) to perform folder scan play.●Repeat playThis function allows you to play the current track repeatedly.1. Press the [RPT] button to perform repeat play. ●Folder repeat playThis function allows you to play a track currently being played in the MP3/WMA/AAC folder repeatedly.1. Press and hold the [RPT] button (1 sec.) to perform folder repeat play.CD/MP3/WMA/AAC OperationsCZ509_ENG.book Page 17 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-17.png)
![CD/MP3/WMA/AAC OperationsEnglish18 CZ509 ●Random playThis function allows you to play all tracks recorded on a disc in a random order.1. Press the [RDM] button to perform random play. ●Folder random playThis function allows you to play all the tracks of all the folders recorded on an MP3/WMA/AAC disc in a random order.1. Press and hold the [RDM] button (1 sec.) to perform folder random play.●To cancel play1. Press the operating button previously selected.∗The various play mode is canceled and the various play off mode appears in the display for 2 seconds.CZ509_ENG.book Page 18 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-18.png)
![English19 CZ509Bluetooth OperationsThe Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication.Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device.The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call, redial call and listen to music.Notes:• Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction. In addition, if leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction.• This system will not operate or may operate improperly with some Bluetooth audio players.• For detailed information on the playable Bluetooth audio players, see our home page: www.clarion.com• When a audio device is paired, the following operations are the same as for CD mode:∗Pause∗Track selection∗Fast-foward∗Fast-reverseThe titles and the play time can not appear in the display.See “CD/MP3/WMA/AAC Operations” (page 15) for details.Basic OperationsSelect Bluetooth1. Press the [SRC] button to switch the source.2. You can press and hold the [SOUND] button to disconnect the currently connected device.Switch the displayPress the [DISP] button to select the display in the following order: “BT TEL” ➜ “BT AUDIO”∗The connected device name will appear in the display.Making a callThere are 4 ways to make outgoing call.●Direct Number CallOutgoing call can be made by entering telephone numbers directly via the car stereo.Telephone number uses 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, and +.1. Press the [BND] button to select “DIAL NUMBER”.2. Press the [ ] button.3. Press the [ ] or [ ] button to select the numbers.4. Press the [x] or [v] button to input or delete the number.5. Press and hold the [ ] button (1 sec.) to call the mobile phone No.∗Press the [SOUND] button to end the call.●Call from PhonebookUser can search the contact name in the phonebook and make call.Alternatively, user can call from mobile phone.1. Press the [BND] button to select “PHONE BOOK”.2. Press the [v] button to enter the contact name mode (In this case, use the [ ], [ ] button to select the desired contact name).3. When the contact name is displayed, press the [v] or [x] button to select the contact name’s phone number.4. Press the [ ] button to call the mobile phone No.∗Press the [SOUND] button to end the call.●Answering a call1. You can answer an incoming call by pressing any button.∗Press the [SOUND] button to reject an incoming call.●Received/Dialled/Missed Call HistoryYou can search any Received/Dialled/Missed Call History.1. Press the [BND] button to select “HISTORY”.2. Press the [v] button to enter the contact name mode (In this case, use the [ ], [ ] button to select the desired contact name).3. When the contact name is displayed, press the [x] or [v] button to select the contact name’s phone number.4. Press the [ ] button to call the mobile phone No.CZ509_ENG.book Page 19 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-19.png)
![Bluetooth OperationsEnglish20 CZ509 ●Redial a callYou can call a redial phone No.1. Press the [BND] button to select “REDIAL”.2. Press and hold the [ ] button (1 sec.) to call the redial phone No.∗Press the [SOUND] button to end the call.●PAIRINGThis option is used to perform Bluetooth pairing with the mobile phone and audio.Up to a maximum of 5 mobile phones and a audio device can be paired.2-1. Select “PAIRING”.3-1. Press the [ ] button.3-2. Press the [ ] or [ ] button to select “TELEPHONE” or “AUDIO”, then press the [ ] button.For a no paired device after reset or at the same time, when you select “TELEPHONE”, please press the [ ] or [ ] button to select the phone book type. (For details, see the chaperter “PHONE BOOK TYPE” (page 21))3-3. After select the “TELEPHONE”, press the [] or [] button to select “MEMORY 1” to “MEMORY 5”, then press and hold the [ ] button (1 sec.) to memory.4-1. Press the [ ] or [ ] button to select “SEARCH” or “WAIT”.5-1. Press and hold the [ ] button (1 sec.).∗When the “SEARCHING” appears in the display, you can press the [ ] button to stop search, then the list search appear.“SEARCH” mode: User can search the Bluetooth mobile phone or audio device.“WAIT” mode: User can search this uint via the mobile phone or audio device.6-1. After the search, press the [ ] or [ ] button to select the desired Bluetooth mobile phone.7-1. Press and hold the [ ] button (1 sec.) to pair.●SELECTThis is a setting for user to select one of the paired mobile phones or audio.2-1. Select “SELECT”.3-1. Press the [ ] button, then the paired mobile phones appears in the display.4-1. Press the [ ] or [ ] button to choose one of the 5 mobile phones.5-1. Press and hold the [ ] button (1 sec.) to connect.Connected device will be able to use all the functionalities provided.●DELETEThis is a setting for user to delete one of the paired device from the list.2-1. Select “DELETE”.3-1. Press the [ ] button, then the paired mobile phones appears in the display.4-1. Press the [ ] or [ ] button to choose one of the 5 phones and a audio devices.5-1. Press and hold the [ ] button (1 sec.) to delete the paired device.Notes:• After deleting the device, the phone book and the call history records will be deleted too.• Deleted paired device will not automatically rearrange in the paired device list.●DISCONNECTThis option is used to disconnect the currently connected device.2-1. Select “DISCONNECT”.3-1. Press and hold the [ ] button (1 sec.) to disconnect.∗Press and hold the [SOUND] button (2 sec.) to disconnect.To change Bluetooth adjustment setting1. Press and hold the [DISP] button (1 sec.) to switch to the Bluetooth adjustment selection display.2. Press the [x] or [v] button to select the “item name”.“PAIRING” ↔ “SELECT” ↔ “DELETE” ↔ “DISCONNECT” ↔ “ADD PHONE BOOK” ↔ “DEL NO. PHONE BOOK” ↔ “HISTORY DELETE ALL” ↔ “PHONE BOOK TYPE” ↔ “MIC GAIN” ↔ “RING VOL” ↔ “TONE SEL” ↔ “NOISE” ↔ “AUTO ANS” ↔ “AUTO CON” ↔ “PASS KEY” ↔ “ADDRESS” ↔ “BT NAME” ↔ “BT FW”3. Press the [ ] or [ ] button to select the “desired setting value”.∗In the case of display blinking “ENT”, you can press the [] button to adjust the setting value.∗After completing settings, press the [DISP] button to return to the previous mode.CZ509_ENG.book Page 20 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-20.png)
![Bluetooth OperationsEnglish21 CZ509●ADD PHONE BOOKThis option is used to add one of the phone No.2-1. Select “ADD PHONE BOOK”.3-1. Press the [ ] button (1 sec.), then the “RECEIVING” appears in the display.∗At the same time the phone No. from the paired phone book list is sent out, then there is a prompt on the mobile phone if it is successful.∗Some mobile phones cannot transfer the phone book to this unit because of the less word and the language type. In this time, please edit your phone book in other language, and transer it once again.●DEL NO. PHONE BOOKThis option is used to delete one of or all phone No. of the added phone book.2-1. Select “DEL NO. PHONE BOOK”.3-1. Press the [ ] button.4-1. Press the [ ] or [ ] button to select “1 DEL” or “ALL DEL”.5-1. When you select “1 DEL”, press the [ ] button, then press the [ ] or [ ] button to select one of the desired phone No.6-1. Press the [ ] button, then the “DELETE?” appears in the display. 7-1. Press the [ ] button (1 sec.) to delete.Note:• If you want to transfer or handl this unit, please perform “DELETE”,“ADD PHONE BOOK” and “DEL NO. PHONE BOOK” function to delete all of your personal information.●HISTORY DELETE ALLThis option is used to delete all of the call records.2-1. Select “HISTORY DELETE ALL”.3-1. Press the [ ] button, then the “CONFIRM?” appears in the display.4-1. Press the [ ] button (1 sec.), then the “DELETING” appears in the display, detele all of the call records successfully.●PHONE BOOK TYPEThe unit provide 3 types of phone book which are stored in memory.2-1. Select “PHONE BOOK TYPE”.3-1. Press the [ ] button.3-2. Press the [ ] or [ ] button to select “1”, “2” or “3”, then press the [ ] button to store in memory.Notes:• If you change the phone book type, all of the paired mobile phones’s book data will be deleted.• The piece number of the phone book’s record can be stored in the different memory of the phone book type are as follow: ●MIC GAINMIC gain can be set by each paired mobile phone device. Each registered device has unique MIC gain setting.2-1. Select “MIC GAIN”.3-1. Press the [ ] or [ ] button to change the MIC gain setting.∗The factory default setting is “3”. (Adjustment range: 1 to 5)●RING VOLThis option is used to change the ringing volume by each paired mobile phone device.2-1. Select “RING VOL”.3-1. Press the [ ] or [ ] button to change the ringing volume.∗The factory default setting is “5”. (Adjustment range: 1 to 10)●TONE SELThe system can ring if the mobile phone cannot ring when the Bluetooth connection has been established.2-1. Press “TONE SEL”.3-1. Press the [ ] or [ ] button to select “INTERNAL” or “AUTO”.∗The unit setting is “AUTO”.“INTERNAL”: Adjust tone in the car bluetooth system.“AUTO”: Automatic adjustment is enabled in the paired mobile phone.●NOISEThis option is used to set noise volume in the car bluetooth system.2-1. Press “NOISE”.3-1. Press the [ ] or [ ] button to select “LOW” or “HIGH”.∗The factory default setting is “LOW”. PHONETYPEMEMORY 1MEMORY 2MEMORY 3MEMORY 4 MEMORY 51250 piece 250 piece 0 piece 0 piece 0 piece 2200 piece 100 piece 100 piece 50 piece 50 piece 3100 piece 100 piece 100 piece 100 piece 100 piece CZ509_ENG.book Page 21 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-21.png)
![Bluetooth OperationsEnglish22 CZ509 ●AUTO ANSThis is a setting to determine whether any incoming call will be automatically or manually answered.∗The factory default setting is “OFF”.2-1. Select “AUTO ANS”.3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.ON: Any incoming call is automatically answered in 5 seconds.OFF: User needs to manually answer the call.●AUTO CONNECT This function allows the Bluetooth to be connected automatically with previously connected device. Connection can be established at any source mode.∗The factory default setting is “OFF”.2-1. Select “AUTO CON”.3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.ON: Automatic connection is enabled.OFF: Automatic connection is disabled.●PASS KEYThis PASS KEY is used during pairing mode. A maximum of 10 digits can be changed through the car stereo.∗The factory default PASS KEY is “1234”.2-1. Select “PASS KEY”.3-1. Press the [ ] button.4-1. Press the [x] or [v] button to remove the cursor.5-1. Press the [ ] or [ ] button to select the desired digits.6-1. Press and hold the [ ] button (2 sec.) to store in memory.∗If press the [BND] button, the pass key returns to the factory default setting.●ADDRESS This will hold the unique Bluetooth address. The address is 12 figures.2-1. Select “ADDRESS”.The Bluetooth address 6 figures appears in the display.3-1. Press the [ ] or [ ] button to display.●Bluetooth NameThis will display the name of the Bluetooth.2-1. Select “BT NAME”.The Bluetooth name appears in the display.●Bluetooth Firmware versionThis will display the Firmware version of the Bluetooth.2-1. Select “BT FW”.The Bluetooth Firmware version appears in the display.CZ509_ENG.book Page 22 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-22.png)
![English23 CZ509Operations Common to Each Mode●Setting the clock2-1. Select “CLOCK”.3-1. Press the [ ] button.3-2. Press the [x] or [v] button to select the hour or the minute.3-3. Press the [ ] or [ ] button to set the correct time.∗The clock is displayed in 12-hour format.3-4. Press the [ ] button to store the time into memory.Note:• You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.●Setting the contrastYou can adjust the display contrast to match the angle of installation of the unit.∗The factory default setting is “10”.(Adjustment level: 1 to 16)2-1. Select “CONTRAST”.3-1. Press the [ ] or [ ] button to adjust the contrast.●Displaying the settingsThe number of indicator of this unit decreases, you can see the state of current settings at any operation mode.2-1. Select “SETTINGS”.3-1. Press the [ ] or [ ] button to display the state of current settings.∗When the setting is selected, after 1 second the current state will be displayed.●Turning the screen saver function on or offThis unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.∗The factory default setting is “ON”.2-1. Select “SCRN SVR”.3-1. Press the [ ] or [ ] button to select the setting.Each time you press the [ ] or [ ] button, the setting changes in the following order:“MESSAGE” ↔ “OFF” ↔ “ON”●Entering message informationMessage up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.∗The factory default setting is “WELCOME TO CLARION”.2-1. Select “MESSAGE INPUT”.3-1. Press the [ ] button.3-2. Press and hold the [BND] button (1 sec.) to clear the old message.3-3. Press the [x] or [v] button to move the cursor.To change adjustment setting1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display.2. Press the [x] or [v] button to select the “item name”.“CLOCK” ↔ “CONTRAST” ↔ “SETTINGS” ↔ “SCRN SVR” ↔ “MESSAGE INPUT” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔ “A-CANCEL” ↔ “SYSTEM CHECK”3. Press the [ ] or [ ] button to select the “desired setting value”.∗In the case of display blinking “ENT”, you can press the [ ] button to adjust the setting value.∗After completing settings, press the [DISP] button to return to the previous mode. For example: after 1 second,CZ509_ENG.book Page 23 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-23.png)
![Operations Common to Each ModeEnglish24 CZ509 3-4. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order:Capital letters ➜ Numbers ➜ Symbols ➜ Capital letters…3-5. Press the [ ] or [ ] button to select the desired character.3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message.3-7. Press and hold the [ ] button (2 sec.) to store the message in memory.∗Press and hold the [BND] button (1 sec.) to cancel the input message. Then press and hold the the [ ] button (2 sec.) to store the message and the message return to default setting.●Setting the method for title scrollSet how to scroll in CD-TEXT, MP3/WMA/AAC title.∗The factory default setting is “ON”.2-1. Select “SCROLL”.3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.•ON:To scroll automatically.•OFF:To scroll just 1 time.∗When you want to see the title again, in the title mode, press and hold the [DISP] button for 3 seconds or longer to scroll the title.●Setting the dimmer controlYou can set the dimmer control “ON” or “OFF”.∗The factory default setting is “ON”.2-1. Select “DIMMER”.3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.●Anti-theft indicatorThe red Anti-theft indicator is a function for preventing theft. When the ACC is off, this indicator blinks.∗The factory default setting is “OFF”.2-1. Select “BLINKLED”.3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.●Setting the external amplifier∗The factory default setting is “OFF”.2-1. Select “A-CANCEL”.3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.•ON:Use with connected AMP.• OFF:Use with inside AMP.●Performing a system checkThis function allows you to perform a system check from the adjust mode when required.2-1. Select “SYSTEM CHECK”.3-1. Press and hold the [ ] button (1 sec.).“SYSTEM CHECK” appears in the display, then the unit returns to the previous operation mode.Entering titlesTitles up to 10 characters long can be stored in memory and displayed for CD, CD changer, Radio stations. The number of titles that can be entered for each mode are as follows.1. Press the [SRC] button to select the mode you want to enter a title (Radio, CD, CD changer).2. Select and play a CD in the CD changer or Radio for which you want to enter the title.3. Press and hold the [DISP] button (1 sec.).4. Press the [x] or [v] button to select “TITLE INPUT”.5. Press the [ ] button.The display switches to the title input display.6. Press the [x] or [v] button to move the cursor.7. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order:Capital letters ➜ Numbers ➜ Symbols ➜ Capital letters…Mode Number of titlesCD mode 50 titlesRadio mode 30 titlesCD changer mode Number of titlesDCZ625 connected 100 titlesCZ509_ENG.book Page 24 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-24.png)
![Operations Common to Each ModeEnglish25 CZ5098. Press the [ ] or [ ] button to select the desired character. 9. Repeat steps 6 to 8 to enter up to 10 characters for the title.10.Press and hold the [ ] button (2 sec.) to store the title into memory.Clearing titles1. Select and play a CD in the CD changer or tune in to a TV station or Radio for which you want to clear the title.2. Press and hold the [DISP] button (1 sec.).3. Press the [x] or [v] button to select “TITLE INPUT”.4. Press the [ ] button.The display switches to the title input display.5. Press and hold the [BND] button (1 sec.).All characters in the title disappear.6. Press and hold the [ ] button (2 sec.) to store the setting. AUX functionThis system has an external input jack on the front panel so you can listen to sounds and music from external devices connected to this unit.●Selecting AUX IN sensitivityMake the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.∗The factory default setting is “MID”.1. Press and hold the [DISP] button (1 sec.).2. Select “AUX SENS”.3. Press the [ ] or [ ] button to select “HIGH”, “MID” or “LOW”.Note:• When AUX mode is selected, AUX IN sensitivity can be set.CZ509_ENG.book Page 25 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-25.png)
![USB/MTP OperationsEnglish27 CZ509• Do not turn on vehicle ignition when the MTP device is connected, since it may result in loss or damage to data on the MTP device. Connect the MTP device to the USB cable after vehicle ignition is turned on.Connecting a USB memory/MTP device1. Connect the USB memory/MTP device to the USB cable.Playback will begin from the first file recorded on the device. ∗If the device is not recognized, press the [SRC] button to switch the source to the device. ∗Always insert the device fully into the connector. Incomplete connections may cause the device not to be recognized.∗Depending on the number of tracks recorded, some amount of time may be required until all tracks are read into the unit.∗The order in which tracks are recorded may differ depending on the device connected (the actual playback order may not be the same as that indicated on your computer’s display). To listen to tracks on a connected USB memory/MTP device1. Press the [SRC] button to switch the source. When USB memory/MTP device is selected, playback (except DRM files) will begin from the location at which playback was previously stopped. ∗When a USB memory/MTP device is connected the USB/MTP mode will be displayed.∗When a USB memory/MTP device is disconnected and then reconnected, playback will begin from the beginning of the USB memory/MTP device.∗When “MTP” mode is selected, AAC files on the MTP device cannot be played.To stop play1. Press the [SRC] button and switch the function to a source other than the USB memory. CAUTIONDo not remove the USB memory/MTP device when the USB/MTP mode is selected, since it may result in loss or damage to data on the USB memory/MTP device. Always backup and save important data on your computer.2. Remove the USB memory/MTP device from the USB cable.CZ509_ENG.book Page 27 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-27.png)
![English28 CZ509 iPod OperationsThis section describes operations when connected to an Apple iPod via the USB cable.Notes:• See the iPod Owner’s Manual for details regarding operation conditions.• The unit will not operate, or may operate improperly with unsupported versions.• For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com.• “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.Connecting an iPodWhen an iPod is connected to the USB slot, “Shuffle” set on the iPod will become as follows:•“Shuffle (Albums)” play ➜ Random play •“Shuffle (Songs)” play ➜ All random playThe iPod has two modes, the “Play mode” and the “iPod menu mode” for selecting tracks. Switch between these modes by pressing the [BND] button (1 sec.).Note:• To connect iPod, please use the USB cable attached in iPod. Select iPod mode1. Press the [SRC] button.Playback will begin from the last file that was played on the iPod.Notes:• The following operations in Play mode operate the same as in CD mode:∗Track selection: [x], [v]∗Fast-forward/fast-reverse: [x], [v]∗Pause: []See “CD/MP3/WMA/AAC Operations” (page 15-17) for details.• After a Podcast file has completed playback, the pause display, or the track-end position Play-Time display will appear. At that time, select a music file once again.Setting iPod simple modeUse this function if you wish to operate through your iPod connected to this unit via the USB cable.∗The factory default setting is “OFF”.1. Press and hold the [DISP] button (1 sec.).2. Press [x] or [v] to select “S-CTRL”.3. Press the [ ] button.4. Press the [ ] or [ ] button to select “ON” or “OFF”.• ON: Operations can be made through your iPod.• OFF: Operations cannot be made through your iPod.5. Press and hold the [ ] button (1 sec.) to store the setting and return to the previous mode.Notes:• When performing iPod operations using simple control mode, make the operations slowly. If repetitive operations are performed too quickly, unforseen errors may occur.• When performing iPod operations using simple control mode, please do not operate the iPod and the unit at the same time, otherwise there may be unexpeted event happened.• Some iPod models do not support this function. Consult your nearest Clarion dealer or website to confirm which models do not support this function.Other various play functions (in Play mode)Notes:• These functions are not supported when in the iPod menu mode.• The Random function set on the iPod remains the same after attachment/detachment of the iPod.• The Repeat function on the iPod will be changed when you connect/disconnect the iPod to the unit.●Repeat playPlay back one track repeatedly. 1. Press the [RPT] button.●Random playPlay all albums within a selected category, in random order. (Corresponds to “Shuffle (Albums)” command on iPod.)1. Press the [RDM] button.CZ509_ENG.book Page 28 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-28.png)
![iPod OperationsEnglish29 CZ509●All random playPlay all tracks within a selected category, in random order. (Corresponds to “Shuffle (Songs)” command on iPod.)1. Press and hold the [RDM] button (1 sec.).●To cancel play1. Press the same play button once again.Notes:• When the repeat play mode is canceled, after play all tracks within a selected category, playback will begin from the first track in the selected category.• When playing the last track within a selected category in Random mode, if ACC is switched off then on again, playback will begin from a different track.• Though the default setting of an iPod is “All Repeat”, the indication on the mode status is not displayed.• When performing operations using simple control mode, do not set the repeat off on the iPod.Selecting category from the iPod menu1. Press the [BND] button (1 sec.) to select the iPod menu mode.The iPod menu categories will be displayed.Notes:• Repeat and Random mode operations are not supported when in the iPod menu mode.• In iPod menu mode, if you press the [x]/[v] or [ ] / [ ] button fast, playback may not be performed.2. Press the [ ] or [ ] button to switch between categories. The iPod menu categories alternate in the following order: “PLAYLISTS” ↔ “ARTISTS” ↔ “ALBUMS” ↔ “SONGS” ↔ “GENRES” ↔ “COMPOSERS”...Note:The iPod menu mode can be canceled by performing one of the following operations: • Press the [BND] button.• When the category select screen is displayed, press the [v] button. 3. Press the [v] button to select the category. 4. When the track name display is showing, press the [v] button. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled. ∗Subfolders may be displayed, depending on the category.In this case, use the [ ] and [ ] buttons to switch between subfolders, then use the [v] button to select the desired subfolder.∗When the track name display is showing, pressing the [x] button will return to the currently playing folder name display.5. Use the [ ] and [ ] buttons to select a track within a category. iPod menu alphabet searchThis function searches the subfolders for desired alphabetical letters.1. Press the [BND] button to select the iPod menu mode.2. Press the [ ] or [ ] button to switch between categories.3. Press the [v] button.∗Subfolders may be displayed, depending on the category. In this case, you can use the [] or [] button to switch between subfolders and use the [v] button to enter the next subfolder layer.4. Press and hold the [DISP] button (1 sec.).5. Press the [ ] or [ ] button to select the desired letter to search.6. Press the [DISP] button to perform search.∗During search, press the [DISP] button to cancel search.Selecting category using preset memory1. Press and hold the [BND] button (1 sec.) to select the iPod menu mode.The category can be set as follows in the [DIRECT] (1-6) buttons.[1] : PLAYLISTS[2] : ARTISTS[3] : ALBUMS[4] : SONGS[5] : GENRES[6] : COMPOSERS2. Press the desired [DIRECT] (1-6) button to select the category.∗Subfolders may be displayed, depending on the category.CZ509_ENG.book Page 29 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-29.png)
![iPod OperationsEnglish30 CZ509 In this case, use the [ ] and [ ] buttons to switch between subfolders, then use the [v] button to select the desired subfolder.3. When the track name display is showing, press the [v] button.Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled.∗Use the [ ] and [ ] buttons to select a track within a category.iPod menu list backIn the iPod menu operation mode:If press the [BND] button, it will return to the previous subfolder list mode.If press and hold the [BND] button (1 sec.), it will return to the category list mode.About title displayThis unit supports the display of title information transmitted from a connected iPod. • Character code information is UTF-8; displayable characters include English alphanumerics, some symbols, and some umlaut characters. •Unsupported characters will be replaced by asterisks (*). CZ509_ENG.book Page 30 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-30.png)
![English31 CZ509Satellite Radio OperationsThis function is available when a Satellite Radio Receiver is connected through the CeNET cable.This unit can control the following satellite radio receivers:• XM Satellite Interface Adapter (Mini-Tuner Included) : CNP2000UCClarion cable for CNP2000UC : CNPCLA1• SIRIUS Satellite Radio Receiver : SIRCL3• SIRIUS Satellite Translator Adapter :CLA-SC1 (which needs Sirius universal Tuner sold separately.)Notes:• When the function is differ depending to the connected receiver, they are distinguished by the following notations:“XM”: for an XM Satellite Radio Receiver “SIRIUS”: for a SIRIUS Satellite Radio Receiver • XM and the XM logos are trademarks of XM Satellite Radio Inc.Selecting a Satellite Radio mode1. Press the [SRC] button.The system changes to the specified Satellite Radio mode.Selecting a band1. Press the [BND] button to select a band.This changes the reception band as follows:•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...●Information displayed during receptionThe following information is displayed when the satellite radio cannot be received normally.•When the receiver is turned on the first time or after a reset: “UPDATING”•When a channel is being tuned in (no signal is yet received):XM: “LOADING”, SIRIUS: “LINKING”• A channel without a broadcast has been selected:XM: “– – – CH”, SIRIUS: “INVALID CH”• A channel not covered by your contract:XM: “UPDATING”, SIRIUS: “CALL 888” ↔ “539-SIRI” (alternated)Confirming your SIRIUS ID1. Press the [x] or [v] button to switch to channel 0.2. Press the [DISP] button until the SIRIUS ID appears in the diaplay.Displaying channel labels1. Press the [DISP] button to select the desired channel label.Channel ➜ Category ➜ Title (Artist) ➜ Radio text ➜ Channel...Channel selection1. Channels are selected with the [x] or [v] button.∗For details, see the following operation descriptions.Note:• The audio output is muted and other button operations are not accepted during channel selection.Tuning modeThere are two channel selection modes: quick tuning mode and step tuning mode.●Quick tuning1. Press and hold the [x] or [v] button (1 sec.).●Step tuning1. Press the [x] or [v] button.Recalling a preset stationA total of 18 satellite radio stations can be stored. • XM: 6-XM1, 6-XM2 and 6-XM3• SIRIUS: 6-SR1, 6-SR2 and 6-SR3This allows you to store your favorite satellite radio stations in memory for later recall.1. Press the [BND] button to select the desired band.2. Press the [ ] / [ ] button or [DIRECT] button to select the desired preset station.CZ509_ENG.book Page 31 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-31.png)
![Satellite Radio OperationsEnglish32 CZ509 Preset memory1. Press the [BND] button to select the desired band.2. Select the desired channel with quick tuning or step tuning.3. Press and hold the [DIRECT] button (2 sec.) to store the current channel into preset memory.Receiving stations selected by categorySatellite Radio allows you to select broadcast channel category (contents).1. Press and hold the [BND] button (1 sec.) to select the category selection mode.∗It press once again, return to the channel selection mode.2. Press the [ ] or [ ] button to change the category item.3. Press the [x] or [v] button to tune in a station.Notes:• When the category selection mode is entered, the category of the last received channel is displayed first.• The category selection mode is canceled when no channel with the selected category can be found.•The [x] or [v] button are not pressed within 7 seconds, the category selection mode is canceled, and resumes to the channel mode.Presetting a categoryA category can be preset by registering specific categories in [DIRECT] buttons 1 to 6 while in the SIRIUS mode. Then the desired category can be recalled by pressing the corresponding [DIRECT] button.1. Press and hold the [BND] button (1 sec.) to enter the category mode.2. Press the [ ] or [ ] button to select a category.3. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current category into preset memory.Notes:• When the name of a channel stored in memory is changed by a broadcasting channel, the display may show a channel name that differs from the stored name.• A channel stored in memory may be discontinued at the option of the broadcasting channel.• If no operation is performed for more than 1 second, category seek tuning can automatically tune in a receivable broadcast channel category.Scan functionThere are two scan modes: the category scan mode and the preset scan mode.During scanning channels are displayed in abbreviated form, the display mode cannot be switched.●Preset scan (PRESET SCN)A preset scan scans the channels (up to 18 channels) stored in the preset memory about every 10 seconds.Press and hold the [ ] button (1 sec.) to select the preset scan mode. And start the preset scanning.●Category scan (CAT SCN)In a category scan, broadcast channels in the same category as the current channel are selected about every 10 seconds.Press the [ ] button to select the category scan mode. And start the category scanning.Note:• Category scanning is not available when no category is defined for the current channel.CZ509_ENG.book Page 32 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-32.png)
![English33 CZ509CD Changer OperationsNote:• The following operations are the same as for CD mode:∗Pause∗Track selection∗Fast-forward/fast-reverse∗Scan play∗Repeat play∗Random playSee “CD/MP3/WMA/AAC Operations” (page 15-17) for details.CD changer functionsWhen an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers.Press the [SRC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [SRC] button to select the CD changer for play.∗If “NO MAG” appears in the display, insert the magazine into the CD changer. “D-CHECK” appears in the display while the player loads (checks) the magazine. ∗If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.Note:• Some CDs recorded in CD-R/CD-RW mode may not be usable.CAUTIONCD-ROM discs cannot be played from every CD changer, it’s depended on the model.Displaying CD titlesThis unit can display title data for CD-text CDs and user titles input with this unit.∗Title data for CD-text CDs can be displayed with this unit only when it is connected to DCZ625.1. Press the [DISP] button to change the title display.Notes:• If the CD playing is not a CD-text CD or no user title has been input, “NO TITLE” appears in the display.• If a CD-text CD is not input its disc title or a track title, “NO TITLE” appears in the display.Procedure to scroll a titleSet “SCROLL” to “ON” or “OFF”.(The factory default setting is “ON”. Refer to the subsection “Setting the method for title scroll” in section “Operations Common to Each Mode”.)●When set to “ON”The title is automatically kept scrolling.●When set to “OFF”To scroll just 1 time.When you want to see the title again, in the title mode, press and hold the [DISP] button (3 sec.) to scroll the title.Selecting a CD1. Press the [ ] or [ ] button to select the desired disc.∗If a CD is not loaded in a slot of magazine, pressing the [] or [] button can not work.Other various play functions●Disc scan playDisc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer. This function continues automatically until it is cancelled.∗Disc scan play is useful when you want to select a desired CD.1. Press and hold the [SCN] button (1 sec.).●Disc repeat playAfter all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled.1. Press and hold the [RPT] button (1 sec.).●Disc random playThe disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled.1. Press and hold the [RDM] button (1 sec.).●To cancel play1. Press the operating button previously selected.CZ509_ENG.book Page 33 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-33.png)
![English34 CZ509 8. TROUBLESHOOTINGProblem Cause MeasureGeneralPower does not turn on. (No sound is produced.)Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase.No sound output when operating the unit with amplifiers or power antenna attached.Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna.1. Turn the unit off.2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter.3. Turn the unit back on.4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required).Nothing happens when buttons are pressed.Display is not accurate.The microprocessor has malfunctioned due to noise, etc.Turn off the power, then press the [OPEN] button and remove the DCP.Press the reset button for about 2 seconds with a thin rod.If the RESET button is pressed when a disc is loaded, please eject the disc and load it once again before attempting to play it.DCP or main unit connectors are dirty. Wipe the dirt off with a soft cloth moistened with cleaning alcohol.No sound heard The speaker protection circuit is operating. 1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates).2. If the sound is muted again, consult our service department.ResetbuttonCZ509_ENG.book Page 34 Monday, December 29, 2008 4:42 PM](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-34.png)
![English37 CZ 5 0 910. SPECIFICATIONSFM TunerFrequency Range: 87.9 MHz to 107.9 MHzUsable Sensitivity: 11 dBµV50dB Quieting Sensitivity: 17 dBµVAlternate Channel Selectivity: 60 dBStereo Separation (1 kHz): 30 dBFrequency Response (±3 dB): 30 Hz to 15 kHzAM TunerFrequency Range: 530 kHz to 1710 kHzUsable Sensitivity: 28 dBµVCD PlayerSystem: Compact disc digital audio systemUsable Discs: Compact discFrequency Response (±1 dB): 20 Hz to 20 kHz Dynamic Range (1 kHz): 80 dB Harmonic Distortion: 0.03%AudioMaximum Power Output: 200 W (50 W X 4 ch)Bass Control Action (100 Hz): +14 dB, –14 dBTreble Control Action (10 kHz): +14 dB, –14 dBLine Output Level (CD 1 kHz): 2 VGeneralPower Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative groundCurrent Consumption: Less than 15 ASpeaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)Auto Antenna Rated Current: 500 mA or lessWeight / Source unit: 2.53 lb. (1.14 kg)Weight / Remote control unit:1.41 oz. (40 g) (including battery)Dimensions / Source unit:7" (Width) X 2" (Height) X 6-1/8" (Depth)[178 (W) X 50 (H) X 155 (D) mm]Dimensions / Remote control unit:1-3/4" (Width) X 4-5/16" (Height) X 7/16" (Depth)[44 (W) X 113 (H) X 11 (D) mm]Note:CSpecifications and design are subject to change without notice for further improvement.Power Output :22 W RMS x 4 Channels at 4 and 1 % THD+NSignal to Noise Ratio:92 dBA (reference: 1 W into 4 )CZ509_ENG.book Page 37 Monday, December 29, 2008 4:42 PMBluetoothSpecification:Bluethooth Ver. 2.0Profile: HFP(Hands-Free Profile) OPP(Object Push Profile) Phone Book A2DP(Advanced Audio Distribution Profile) AVRCP(Audio/Video Remote Control Profile)Send/Receive Sensitivity: Class 2](https://usermanual.wiki/Faurecia-Clarion-Electronics/PE3155B1/User-Guide-1056365-Page-37.png)
