Faurecia Clarion Electronics QY8900 CAR NAVIGATION User Manual
Clarion Co., Ltd. CAR NAVIGATION
User manual.pdf
Car Navigation QY-8900 MODEL Navigation system manual Table of contents English Names of Various Parts ��������������������������������������������������� 3 Basic Operations ������������������������������������������������������� 4 Bluetooth Operation ������������������������������������������������������ 5 Navigation ����������������������������������������������������������� 6 Navigation System Settings ������������������������������������������������� 8 Route Guidance �������������������������������������������������������� 9 About Information ������������������������������������������������������ 10 Warning English ●●Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: GG This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: zz Reorient or relocate the receiving antenna. zz Increase the separation between the equipment and receiver. zz Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. zz Consult the dealer or an experienced radio/TV technician for help. The device must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC’s and Industry Canada’s RF radiation exposure limits for general population/uncontrolled exposure,this device must be installed to provide a separation distance of at least 20cm from all persons.” This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : ●●This device may not cause harmful interference, and ●●This device must accept any interference received, including interference that may cause undesired operation. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. Names of Various Parts Panel Buttons 1 [Q]Eject button: Short press it to eject the disc inside the unit. 2 Disc slot: CD disc can be inserted for playing. 3 LCD(touch screen): To display the working statuses of various modes. 4 SD card slot: Map SD card. 5 [TUNE-SCROLL] knob/[ENTER/SOUND] button: In AM/FM mode, rotate to search radio station frequency manualy; press to store radio stations in memory. Press and turn the knob to jump to previous or next touch key and select it in source and menu mode. In other mode, press and turn the knob to adjust the volume balance. 6 [ BACK] button: Back to the previous mode. ]Day/night button: Press to switch between day 7[ Caution ●●It is prohibited to pull out the map SD card or the system will not work. English or night mode. 8 [CAMERA] button: To enter camera mode. 9 [x]Next Track button: In CD/USB/iPod/Bluetooth Audio Device mode, short press it to select the next track to play, and long press it to Fast Forward; in AM/FM mode, short press to search radio station frequency up automatically. 0 [v]Previous Track button: In CD/USB/iPod/ Bluetooth Audio Device mode, short press it to select the previous track to play, and long press it to Fast Reverse; in AM/ FM mode, short press to search radio station frequency down automatically. ![AUDIO] Audio button: To enter audio selection screen or Audio Mode. @[MAP] Map button: Press to enter the map screen. # [MENU] Menu button:Press to enter Menu Screen to select audio function or navigation function. button/Volume Knob: Switch to adjust volume; short press to turn off/on audio device. Basic Operations Mode Switch English ■Switch to navigation mode Press [MAP] button on the panel to switch to navigation mode for map display. ■Switch to source mode Press [AUDIO] button on the panel or touch to switch to source mode such as Radio mode. Press [AUDIO] button or touch in Source mode to switch to source selection screen. ■Switch to Bluetooth mobile phone mode Touch switch to Bluetooth mobile phone mode. to enter main menu zz Change page by dragging left or right or touch and Basic Settings 1 Press [MENU] button on the panel. to enter Settings 2 Touch Screen. Main menu operations On main menu screen you can enter corresponding work mode by touch the icons on the screen. 1 Press [MENU] on the panel or touch screen. Bluetooth Operation Pair Bluetooth Device English to enter Set1 Touch tings Screen.Then touch to enter Bluetooth setting screen. 3 Touch the icon to enter the appropriate setting. 4 If you want to select the audio device秋to pair, touch , and you have to edit the PIN (minimum 4 digits and maximum 16 digits) to pair the audio device. Source Media Mode 1 Press [AUDIO] button on the panel or touch to enter source screen. to select the mo2 Touch bile phone or audio device to pair. 5 After entering the PIN, touch and operate as per the information prompted. 2 Touch the icon to enter the appropriate source media. 3 If you want to select the mobile phone 秋to pair, touch ■Location menu (Menu on scrolled map) After scrolling the map by touching English the Map screen, touch on the screen to display the Location menu at the left side of the screen. 2 Touch the icon to enter the appropriate function. Navigation Menu Types and Operation ■Map menu (Menu on current location map) 6 After successful pairing, it will automatically return to Bluetooth Setting screen. Bluetooth Telephone 1 Touch to enter Phone screen. Touch on the map screen to display the Map menu at the left side of the screen. Map Screen Features ■Types of the map There are two types of map: the 2D map and the 3D map. ●●2D Map Indicators on the scrolled map ●●3D Map Indicators are displayed after scrolling the map. ■Indicators on the map Indicators displayed on the Map screen are different according to the conditions at that time. Indicators on the map of the current location 1 Audio mark 2 Vehicle mark ]Map Menu key 3[ ]Map scale key 4[ ]Map bearing mark 1 [ ] (Slow Scroll)key 2 Displays the name of the street under the cursor. Manipulating the Map Screen ■Scrolling the map Touching the Map screen displays a cursor at the centre of the screen, you can scroll the map. ■Slow scroll mode operation Touch while scrolling the 2D map to display the following screen: Indicators displayed during the route guidance mode After a destination is set and travelling is started, the guidance route and various guidance information are displayed on the map. Keep touching the desired arrow key , , , , , , , .) moves the map slowly towards the corresponding direction. To quit the slow scroll mode, touch English 1 Small Turn Arrow display 2 Guidance point 3 Distance to the waypoint/ destination ■Zooming IN/OUT the map to display the zoom in/ 1 Touch out key. English 3 Touch the corresponding key to change the map view. or 2 Touch map scale. Entering the Destination to change the ■Changing the map appearance The Map screen can be adjusted regarding orientation or appearance of the map. on the Map screen of 1 Touch the current vehicle location. to enter Map 2 Touch View screen. 3 Touch the item to enter the appropriate setting. Navigation System Settings 1 Press [MENU]/[MAP]/[AUDIO] button on the panel to display the function bar. to enter 2 Touch , Navigation Settings Screen. Searching Your Destination from the Destination Menu You can search for a destination from the Destination menu by using various methods. Use a suitable searching method according to the place you wish to go to, then operate as per the information prompted. Destination menu screen Junction Map 1 Turn List 2 Scrolling key 23 1 Remaining distance indication 2 Guidance route 3 Guidance point Turn list on Route Route Guidance After you have entered the destination and started the route guidance, you will be guided along the route by screen display and by voice. English Changing/Editing the Route Settings From the Route menu, editing the current route, confirming the route information, setting the conditions of the route calculation, etc. can be performed. 1 Press [MENU] button on the panel. to enter Route menu 2 Touch screen when a route had exist. The screen is always divided into two displays and the Turn List on Route is displayed on the left display if Turn List is activated. 3 Touch the desired item to change or edit the route settings. About Information English This screen sets or displays various information that is helpful for using the vehicle safely and comfortably. 1 Press [MENU] button on the panel. to enter Info screen. 2 Touch 3 Touch the desired item to view the information, and about some items you can operate as per the information prompted. 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Instance ID : uuid:eac57793-fcd9-4b01-a14c-f83ad4f38332 Original Document ID : adobe:docid:indd:9dc4b01c-a092-11e0-97fc-9dc057669df7 Document ID : xmp.id:C649815C8904E7119E0F9CE9B4841446 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:C549815C8904E7119E0F9CE9B4841446 Derived From Document ID : xmp.did:44B91B3C0D02E7119FC5A7322C594F64 Derived From Original Document ID: adobe:docid:indd:9dc4b01c-a092-11e0-97fc-9dc057669df7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2017:03:09 13:35:56+08:00 Create Date : 2017:03:09 13:35:56+08:00 Modify Date : 2017:03:09 13:35:59+08:00 Metadata Date : 2017:03:09 13:35:59+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 12 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools